Overview

Background

Real Twig was designed and tested using QSMs created with the TreeQSM modeling software. If high quality point clouds, QSMs with the proper input settings, and species specific twig diameter measurements are supplied, you can expect to get very good estimates of tree volume within ± 10% of the real tree volume.

If any given QSM provides parent-child cylinder relationships, Real Twig will work, as is the case of the SimpleForest and Treegraph software packages. If high quality point clouds, QSMs with the proper input settings, and species specific twig diameter measurements are supplied, you can expect to get good estimates of tree volume across multiple different software packages.

While Real Twig can provide excellent tree volume estimates, it can not transform poor quality data into good data. As a general rule of thumb, the closer the QSM resembles the actual tree before correction, the better the results will be after correction. Real Twig performs best when the topology of the tree is correct, and only the cylinder sizes are the main sources of QSM error. Errors in QSM topology become readily apparent after correction, so Real Twig can also be used to visually validate QSM topology without reference data.

Installation

You can install the package directly from CRAN:

install.packages("rTwig")

Or the latest development version from GitHub:

devtools::install_github("https://github.com/aidanmorales/rTwig")

Load Packages

The first step is to load the rTwig package. Real Twig works well when paired with packages from the Tidyverse, so we will also load the dplyr package to help with data manipulation.

# Load rTwig
library(rTwig)

# Other useful packages
library(dplyr)

Import QSM

rTwig supports all available versions of TreeQSM, from v2.0 to v2.4.1 at the time of writing. It is important to note that legacy versions of TreeQSM (v2.0) store data in a much different format than modern versions (v2.3.0-2.4.1). It is strongly advised to use the latest version of TreeQSM with rTwig for the best QSM topology and volume estimates. Older versions can be used, but the QSM topology is poor, and volume underestimation is almost guaranteed.

Regardless of the version of TreeQSM or MATLAB used, the import_qsm() function will import a QSM (.mat extension) and convert the data to a format usable by R. The user must specify which version of TreeQSM they are using with the version parameter. rTwig automatically defaults to use the new TreeQSM format, so the older format can be imported with version = "2.0". import_qsm() also imports all QSM information, including cylinder, branch, treedata, rundata, pmdistance, and triangulation data, which are stored together as a list.

SimpleForest exports its QSMs as .csv files, so they are easy to load into R using the built in read.csv() function. If the QSM contains thousands of cylinders, it is much faster to use the fread() function from the data.table package to take advantage of multi-threaded support.

Treegraph exports its QSMs as .json files. To import them into R, we can use the import_treegraph() function to quickly load in a Treegraph QSM.

Example 1: TreeQSM v2.3.0 - 2.4.1

We can import a QSM by supplying the import_qsm() function the directory to our QSM.

# QSM directory
file <- system.file("extdata/QSM.mat", package = "rTwig")

# Import and save QSM
qsm <- import_qsm(file)

The QSM should be a list with six elements. We can check it as follows:

summary(qsm)
#>               Length Class      Mode
#> cylinder      17     data.frame list
#> branch        10     data.frame list
#> treedata      91     -none-     list
#> rundata       45     data.frame list
#> pmdistance    21     -none-     list
#> triangulation 12     -none-     list

Let’s check what version of TreeQSM was used, the date the QSM was made, and take a look at the cylinder data.

# QSM info
qsm$rundata$version
#> [1] "2.4.1"
qsm$rundata$start.date
#> [1] "2023-12-06 10:14:31 EST"

# Number of cylinders
str(qsm$cylinder)
#> 'data.frame':    1136 obs. of  17 variables:
#>  $ radius          : num  0.0465 0.0454 0.0442 0.0437 0.0429 ...
#>  $ length          : num  0.09392 0.07216 0.06654 0.00938 0.06795 ...
#>  $ start.x         : num  0.768 0.768 0.768 0.769 0.769 ...
#>  $ start.y         : num  -16.4 -16.4 -16.4 -16.3 -16.3 ...
#>  $ start.z         : num  254 254 254 254 254 ...
#>  $ axis.x          : num  0.00995 -0.0111 0.01364 0.01571 0.01449 ...
#>  $ axis.y          : num  0.0912 0.0391 0.0367 0.0271 0.0267 ...
#>  $ axis.z          : num  0.996 0.999 0.999 1 1 ...
#>  $ parent          : int  0 1 2 3 4 5 6 7 8 9 ...
#>  $ extension       : int  2 3 4 5 6 7 8 9 10 11 ...
#>  $ added           : num  0 0 0 0 0 0 0 0 0 0 ...
#>  $ UnmodRadius     : num  0.0465 0.0454 0.0442 0.0437 0.0429 ...
#>  $ branch          : int  1 1 1 1 1 1 1 1 1 1 ...
#>  $ SurfCov         : num  0.875 1 1 1 1 1 1 1 1 1 ...
#>  $ mad             : num  0.00072 0.000538 0.000523 0.000335 0.000438 ...
#>  $ BranchOrder     : int  0 0 0 0 0 0 0 0 0 0 ...
#>  $ PositionInBranch: int  1 2 3 4 5 6 7 8 9 10 ...

Example 2: TreeQSM v2.0

Let’s try importing an old QSM and check its structure.

# QSM Directory
file <- system.file("extdata/QSM_2.mat", package = "rTwig")

# Import and save QSM
qsm2 <- import_qsm(file, version = "2.0")

# QSM Info
summary(qsm2)
#>          Length Class      Mode
#> cylinder 15     data.frame list
#> treedata 33     -none-     list
str(qsm2$cylinder)
#> 'data.frame':    1026 obs. of  15 variables:
#>  $ radius          : num  0.0612 0.056 0.0553 0.0552 0.0534 ...
#>  $ length          : num  0.335 0.283 0.272 0.244 0.267 ...
#>  $ start.x         : num  8.4 8.43 8.44 8.47 8.5 ...
#>  $ start.y         : num  47.7 47.7 47.7 47.8 47.8 ...
#>  $ start.z         : num  2.23 2.57 2.85 3.12 3.36 ...
#>  $ axis.x          : num  0.1103 0.0531 0.0878 0.1666 0.0894 ...
#>  $ axis.y          : num  0.0337 0.0296 0.1282 0.0801 0.061 ...
#>  $ axis.z          : num  0.993 0.998 0.988 0.983 0.994 ...
#>  $ parent          : num  0 1 2 3 4 5 6 7 8 9 ...
#>  $ extension       : num  1 2 3 4 5 6 7 8 9 10 ...
#>  $ added           : int  0 0 0 0 0 0 0 0 0 0 ...
#>  $ UnmodRadius     : num  0.0612 0.056 0.0553 0.0552 0.0534 ...
#>  $ branch          : num  1 1 1 1 1 1 1 1 1 1 ...
#>  $ BranchOrder     : num  0 0 0 0 0 0 0 0 0 0 ...
#>  $ PositionInBranch: num  1 2 3 4 5 6 7 8 9 10 ...

Example 3: SimpleForest

# QSM directory
file <- system.file("extdata/QSM.csv", package = "rTwig")

# Import and save QSM cylinder data
cylinder <- read.csv(file)

Let’s take a look at the SimpleForest cylinder data.

str(cylinder)
#> 'data.frame':    1149 obs. of  17 variables:
#>  $ ID                  : int  0 1 2 3 4 5 6 7 8 9 ...
#>  $ parentID            : int  -1 0 1 2 3 4 5 6 7 8 ...
#>  $ startX              : num  0.761 0.759 0.771 0.768 0.765 ...
#>  $ startY              : num  -16.4 -16.4 -16.4 -16.3 -16.4 ...
#>  $ startZ              : num  254 254 254 254 254 ...
#>  $ endX                : num  0.759 0.771 0.768 0.765 0.769 ...
#>  $ endY                : num  -16.4 -16.4 -16.3 -16.4 -16.4 ...
#>  $ endZ                : num  254 254 254 254 254 ...
#>  $ radius              : num  0.0472 0.0479 0.0469 0.0467 0.0453 ...
#>  $ length              : num  0.0497 0.0529 0.0535 0.0525 0.0528 ...
#>  $ growthLength        : num  31.4 31.4 31.3 31.3 31.2 ...
#>  $ averagePointDistance: num  0.00589 0.00378 0.00205 0.00246 0.00251 ...
#>  $ segmentID           : int  0 0 0 0 0 0 0 0 0 0 ...
#>  $ parentSegmentID     : int  -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 ...
#>  $ branchOrder         : int  0 0 0 0 0 0 0 0 0 0 ...
#>  $ reverseBranchOrder  : int  18 18 18 18 18 18 18 18 18 18 ...
#>  $ branchID            : int  0 0 0 0 0 0 0 0 0 0 ...

Cylinder Data

Next, we have to update the parent-child ordering in the cylinder data to allow for path analysis and add some new QSM variables. The most important QSM variable is growth length. Growth length is a cumulative length metric, where the growth length of a cylinder is its length, plus the lengths of all of its children. This gives us perfect ordering along a branch or a path, where the highest growth length is equal to the base of the tree, and twigs have a growth length equal to their cylinder length. It is also important to note that the number of twigs in a QSM is always equal to the number of paths in a QSM, since a path goes from the base of the tree to a twig tip.

We also calculate several additional variables to improve QSM analysis and visualization. The reverse branch order (RBO) assigns an order of 1 to the twigs, and works backwards to the base of the main stem, which has the highest RBO. The RBO is essentially the maximum node depth for any given branch segment (the area between branching forks). RBO problematic twig cylinders easy to identify. The distance from each cylinder to the base, and the average distance from each cylinder to all supported twigs are new ways to help visualize problematic cylinders.

Let’s save the cylinders to a new variable to make it easier to work with and update the ordering.

# Save cylinders to new object
cylinder <- qsm$cylinder

# Update cylinder data
cylinder <- update_cylinders(cylinder)

Topology

Before we correct the QSM, it is often worthwhile to check the quality of the QSM by plotting it against its input point cloud. To do this, we load the point cloud and save it as a data frame, with the first three columns as the x, y, and z columns. We use the plot_qsm() function to do this. We want to check the raw cylinder fits before any possible modification, so we will will use the raw cylinder radii.

# Load the input point cloud
file <- system.file("extdata/cloud.txt", package = "rTwig")
cloud <- read.table(file, header = FALSE)

# Plot the qsm and point cloud
plot_qsm(cylinder = cylinder, cloud = cloud, radius = "UnmodRadius")

Twig Diameters

Before we can correct the QSM radii, we need to know what our real twig diameter is. For this example tree, the species is a Kentucky coffee tree (Gymnocladus dioicus), which has nice, stout twigs. rTwig comes with a data base of twigs that can be called by typing in the twigs data set. The data set includes the average twig radius, the min and max radius, the standard deviation, and the coefficient of variation. Let’s look at the twig data set and find the twig diameter for Kentucky coffee tree.

# Look at the twigs database
twigs
#> # A tibble: 102 × 7
#>    scientific_name  radius_mm     n   min   max   std    cv
#>    <chr>                <dbl> <dbl> <dbl> <dbl> <dbl> <dbl>
#>  1 Abies concolor        1.43    21  0.89  1.9   0.28  0.19
#>  2 Abies spp.            1.43    21  0.89  1.9   0.28  0.19
#>  3 Acer platanoides      1.39    30  0.89  2.03  0.3   0.21
#>  4 Acer rubrum           1.18    30  0.89  1.52  0.16  0.14
#>  5 Acer saccharinum      1.41    14  0.89  1.9   0.27  0.2 
#>  6 Acer saccharum        1.2     30  0.89  1.65  0.23  0.19
#>  7 Acer spp.             1.29   104  0.89  2.03  0.23  0.18
#>  8 Aesculus flava        2.67     8  2.29  2.79  0.2   0.08
#>  9 Aesculus spp.         2.67     8  2.29  2.79  0.2   0.08
#> 10 Betula nigra          0.85    30  0.51  1.52  0.23  0.27
#> # ℹ 92 more rows

# Find our species
filter(twigs, scientific_name == "Gymnocladus dioicus")
#> # A tibble: 1 × 7
#>   scientific_name     radius_mm     n   min   max   std    cv
#>   <chr>                   <dbl> <dbl> <dbl> <dbl> <dbl> <dbl>
#> 1 Gymnocladus dioicus      4.23    30  2.79   6.6  0.87   0.2

Summary Metrics

Before we correct the QSM, Let’s take a look at the current metrics, so we can compare the tree volume before and after correction. We can do this with the qsm_summary() function. If stem triangulation was enabled in TreeQSM, we can use it to better represent the main stem volume in some cases, especially when there are large butress flares. We can also make a plot of the radius versus the growth length to see how much overestimation there is in the twig radii.

# QSM summary
qsm_summary(cylinder, radius = "unmodified")[[1]]
#> # A tidytable: 6 × 3
#>   BranchOrder tree_volume_L tree_area_m2
#>         <int>         <dbl>        <dbl>
#> 1           0       10.8         0.644  
#> 2           1        5.80        0.827  
#> 3           2        3.86        0.732  
#> 4           3        1.06        0.237  
#> 5           4        0.622       0.0785 
#> 6           5        0.0346      0.00693

# QSM summary with Triangulation
qsm_summary(cylinder = cylinder, triangulation = qsm$triangulation, radius = "unmodified")[[1]]
#> # A tidytable: 6 × 3
#>   BranchOrder tree_volume_L tree_area_m2
#>         <int>         <dbl>        <dbl>
#> 1           0       29.0         0.645  
#> 2           1        5.80        0.827  
#> 3           2        3.86        0.732  
#> 4           3        1.06        0.237  
#> 5           4        0.622       0.0785 
#> 6           5        0.0346      0.00693

Looking at the diagnostic plot on a log log scale, with the measured twig radius as the horizontal line, we can see that nearly all of the twig radii are overestimated, with increasing radii variation as the growth length approaches zero. Except for the main stem, there is not a very clear pattern in the individual branch tapering.

Correct Radii

Now we can correct our QSM cylinder radii with the correct_radii() function. In this step, we model each path in the tree separately, where poorly fit cylinders are identified and removed, and a GAM is fit, where the intercept is the measured twig radius, and the growth length predicts the cylinder radius. Let’s correct the cylinder radii on our Kentucky coffee tree and look at the new volume estimates and diagnostic plots.

# Correct cylinder radii
cylinder <- correct_radii(cylinder, twig_radius = 4.23)
# Corrected QSM summary
qsm_summary(cylinder, radius = "modified")[[1]]
#> # A tidytable: 6 × 3
#>   BranchOrder tree_volume_L tree_area_m2
#>         <int>         <dbl>        <dbl>
#> 1           0      10.8          0.640  
#> 2           1       5.20         0.754  
#> 3           2       2.69         0.583  
#> 4           3       0.539        0.170  
#> 5           4       0.104        0.0431 
#> 6           5       0.00683      0.00308

Here we can see that we reduced the volume of the QSM by around 3 liters, which is around a 15% overestimation in volume before correction. Kentucky coffee tree has relatively large twigs, so the overestimation is not as severe as a tree with much smaller twigs, that can have upwards of >200% overestimation in some cases.

Looking at the diagnostic plot, we can see that individual branches can clearly be identified by their unique allometry. Notice how nearly all of the volume reduction occurred in the higher order branches, with the main stem remaining nearly unchanged. The branches now taper towards the measured twig radius for Kentucky coffee tree. Getting the real twig diameter is critical, as too high a value will overestimate volume, and too low a value will underestimate total volume, with the over or underestimate being proportional to the number of twigs and small branches in the tree. If your species is not available in the database, we have found that the genus level twig radius average is a good substitute.

Visualization

Optionally, we can smooth our QSM by ensuring all of the cylinders are connected. This is a visual change and does not affect the volume estimates. We can do this with the smooth_qsm() function, and plot the results with the plot_qsm() function. The different colors are the different branch orders. We can also color our QSM by many different variables and palettes. See the plot_qsm() documentation for more details.

# Smooth QSM
cylinder <- smooth_qsm(cylinder)

# Plot QSM
plot_qsm(cylinder)

# QSM Custom Colors & Piping
cylinder %>%
  plot_qsm(
    radius = "radius",
    cyl_color = "reverseBranchOrder",
    cyl_palette = "magma"
  )

# Plot Twigs Colored by Unique Segment
cylinder %>%
  filter(reverseBranchOrder == 1) %>%
  plot_qsm(
    radius = "radius",
    cyl_color = "reverseBranchOrder",
    cyl_palette = "rainbow"
  )

We can also save our QSM as a mesh (.ply extension) for use in other modeling programs with the export_mesh() function. The same colors and palettes found in the plot_qsm() function can be used to color the mesh.

# Export Mesh Colored by RBO
cylinder %>%
  export_mesh(
    filename = "QSM_mesh",
    radius = "radius",
    color = "reverseBranchOrder",
    palette = "magma"
  )

# Export Twigs Colored by Unique Segments
cylinder %>%
  filter(reverseBranchOrder == 1) %>%
  export_mesh(
    filename = "QSM_mesh",
    radius = "radius",
    color = "reverseBranchOrder",
    palette = "rainbow"
  )

Workflow & Best Practices

Below is an overview of the typical rTwig processing chain. When dealing with multiple trees, we advise creating a master data frame in a tidy format, where each unique tree is a row, and the columns are the tree id, the directory to the QSM .mat file, and the species twig diameter, all of which can be tailored to your workflow needs. Then it is a simple matter of looping over the master data frame, correcting each tree, and saving the results to a master list. Make sure to read each function’s documentation for more examples and unique features.

# Import QSM
file <- system.file("extdata/QSM.mat", package = "rTwig")

# Real Twig Main Steps
cylinder <- run_rtwig(file, twig_radius = 4.23)

# Tree Metrics
metrics <- tree_metrics(cylinder)

# Plot Results
plot_qsm(cylinder)