LaTeX2e: An unofficial reference manual 1 About this document 2 Overview of LaTeX 3 Document classes 4 Fonts 5 Layout 6 Sectioning 7 Cross references 8 Environments 9 Line breaking 10 Page breaking 11 Footnotes 12 Definitions 13 Counters 14 Lengths 15 Making paragraphs 16 Math formulas 17 Modes 18 Page styles 19 Spaces 20 Boxes 21 Color 22 Graphics 23 Special insertions 24 Splitting the input 25 Front/back matter 26 Letters 27 Input/output 28 Command line interface Appendix A Document templates Index LaTeX2e: An unofficial reference manual 1 About this document 2 Overview of LaTeX 2.1 Starting and ending 2.2 Output files 2.3 TeX engines 2.4 LaTeX command syntax 2.5 Environment 2.6 CTAN: The Comprehensive TeX Archive Network 3 Document classes 3.1 Document class options 3.2 Additional packages 3.3 Class and package construction 3.3.1 Class and package structure 3.3.2 Class and package commands 4 Fonts 4.1 ‘fontenc’ package 4.1.1 ‘\DeclareFontEncoding’ 4.1.2 ‘\DeclareTextAccent’ 4.1.3 ‘\DeclareTextAccentDefault’ 4.1.4 ‘\DeclareTextCommand’ & ‘\ProvideTextCommand’ 4.1.5 ‘\DeclareTextCommandDefault’ & ‘\ProvideTextCommandDefault ’ 4.1.6 ‘\DeclareTextComposite’ 4.1.7 ‘\DeclareTextCompositeCommand’ 4.1.8 ‘\DeclareTextSymbol’ 4.1.9 ‘\DeclareTextSymbolDefault’ 4.1.10 ‘\LastDeclaredEncoding’ 4.1.11 ‘\UseTextSymbol’ & ‘\UseTextAccent’ 4.2 Font styles 4.3 Font sizes 4.4 Low-level font commands 5 Layout 5.1 ‘\onecolumn’ 5.2 ‘\twocolumn’ 5.3 ‘\flushbottom’ 5.4 ‘\raggedbottom’ 5.5 Page layout parameters 5.6 ‘\baselineskip’ & ‘\baselinestretch’ 5.7 Floats 5.7.1 ‘\caption’ 6 Sectioning 6.1 ‘\part’ 6.2 ‘\chapter’ 6.3 ‘\section’ 6.4 ‘\subsection’ 6.5 ‘\subsubsection’, ‘\paragraph’, ‘\subparagraph’ 6.6 ‘\appendix’ 6.7 ‘\frontmatter’, ‘\mainmatter’, ‘\backmatter’ 6.8 ‘\@startsection’, typesetting sectional unit headings 7 Cross references 7.1 ‘\label’ 7.2 ‘\pageref’ 7.3 ‘\ref’ 7.4 ‘xr’ package 8 Environments 8.1 ‘abstract’ 8.2 ‘array’ 8.3 ‘center’ 8.3.1 ‘\centering’ 8.4 ‘description’ 8.5 ‘displaymath’ 8.6 ‘document’ 8.6.1 ‘\AtBeginDocument’ 8.6.2 ‘\AtEndDocument’ 8.7 ‘enumerate’ 8.8 ‘eqnarray’ 8.9 ‘equation’ 8.10 ‘figure’ 8.11 ‘filecontents’ 8.12 ‘flushleft’ 8.12.1 ‘\raggedright’ 8.13 ‘flushright’ 8.13.1 ‘\raggedleft’ 8.14 ‘itemize’ 8.15 ‘letter’ environment: writing letters 8.16 ‘list’ 8.16.1 ‘\item’: An entry in a list 8.16.2 ‘trivlist’: A restricted form of ‘list’ 8.17 ‘math’ 8.18 ‘minipage’ 8.19 ‘picture’ 8.19.1 ‘\put’ 8.19.2 ‘\multiput’ 8.19.3 ‘\qbezier’ 8.19.4 ‘\graphpaper’ 8.19.5 ‘\line’ 8.19.6 ‘\linethickness’ 8.19.7 ‘\thinlines’ 8.19.8 ‘\thicklines’ 8.19.9 ‘\circle’ 8.19.10 ‘\oval’ 8.19.11 ‘\shortstack’ 8.19.12 ‘\vector’ 8.19.13 ‘\makebox’ (picture) 8.19.14 ‘\framebox’ (picture) 8.19.15 ‘\frame’ 8.19.16 ‘\dashbox’ 8.20 ‘quotation’ & ‘quote’ 8.21 ‘tabbing’ 8.22 ‘table’ 8.23 ‘tabular’ 8.23.1 ‘\multicolumn’ 8.23.2 ‘\vline’ 8.23.3 ‘\cline’ 8.23.4 ‘\hline’ 8.24 ‘thebibliography’ 8.24.1 ‘\bibitem’ 8.24.2 ‘\cite’ 8.24.3 ‘\nocite’ 8.24.4 Using BibTeX 8.24.4.1 BibTeX error messages 8.25 ‘theorem’ 8.26 ‘titlepage’ 8.27 ‘verbatim’ 8.27.1 ‘\verb’ 8.28 ‘verse’ 9 Line breaking 9.1 ‘\\’ 9.2 ‘\obeycr’ & ‘\restorecr’ 9.3 ‘\newline’ 9.4 ‘\-’ (discretionary hyphen) 9.5 ‘\discretionary’ (generalized hyphenation point) 9.6 ‘\fussy’ & ‘\sloppy’ 9.6.1 ‘sloppypar’ 9.7 ‘\hyphenation’ 9.8 ‘\linebreak’ & ‘\nolinebreak’ 10 Page breaking 10.1 ‘\clearpage’ & ‘\cleardoublepage’ 10.2 ‘\newpage’ 10.3 ‘\enlargethispage’ 10.4 ‘\pagebreak’ & ‘\nopagebreak’ 11 Footnotes 11.1 ‘\footnote’ 11.2 ‘\footnotemark’ 11.3 ‘\footnotetext’ 11.4 Footnotes in section headings 11.5 Footnotes in a table 11.6 Footnotes of footnotes 12 Definitions 12.1 ‘\newcommand’ & ‘\renewcommand’ 12.1.1 Control sequence, control word and control symbol 12.2 ‘\providecommand’ 12.3 ‘\makeatletter’ & ‘\makeatother’ 12.4 ‘\@ifstar’ 12.5 ‘\newcounter’: Allocating a counter 12.6 ‘\newlength’ 12.7 ‘\newsavebox’ 12.8 ‘\newenvironment’ & ‘\renewenvironment’ 12.9 ‘\newtheorem’ 12.10 ‘\newfont’ 12.11 ‘\protect’ 12.12 ‘\ignorespaces & \ignorespacesafterend’ 12.13 xspace package 13 Counters 13.1 ‘\alph \Alph \arabic \roman \Roman \fnsymbol’: Printing counters 13.2 ‘\usecounter’ 13.3 ‘\value’ 13.4 ‘\setcounter’ 13.5 ‘\addtocounter’ 13.6 ‘\refstepcounter’ 13.7 ‘\stepcounter’ 13.8 ‘\day’ & ‘\month’ & ‘\year’ 14 Lengths 14.1 Units of length 14.2 ‘\setlength’ 14.3 ‘\addtolength’ 14.4 ‘\settodepth’ 14.5 ‘\settoheight’ 14.6 ‘\settowidth’ 14.7 ‘\stretch’ 14.8 Expressions 15 Making paragraphs 15.1 ‘\par’ 15.2 ‘\indent’ & ‘\noindent’ 15.3 ‘\parindent’ & ‘\parskip’ 15.4 Marginal notes 16 Math formulas 16.1 Subscripts & superscripts 16.2 Math symbols 16.2.1 Arrows 16.2.2 ‘\boldmath’ & ‘\unboldmath’ 16.2.2.1 ‘bm’: Individual bold math symbols 16.2.2.2 OpenType bold math 16.2.3 Blackboard bold 16.2.4 Calligraphic 16.2.5 Delimiters 16.2.5.1 ‘\left’ & ‘\right’ 16.2.5.2 ‘\bigl’, ‘\bigr’, etc. 16.2.6 Dots, horizontal or vertical 16.2.7 Greek letters 16.3 Math functions 16.4 Math accents 16.5 Over- and Underlining 16.6 Spacing in math mode 16.6.1 ‘\smash’ 16.6.2 ‘\phantom’ & ‘\vphantom’ & ‘\hphantom’ 16.6.3 ‘\mathstrut’ 16.7 Math styles 16.8 Math miscellany 16.8.1 Colon character ‘:’ & ‘\colon’ 16.8.2 ‘\*’ 16.8.3 ‘\frac’ 16.8.4 ‘\sqrt’ 16.8.5 ‘\stackrel’ 17 Modes 17.1 ‘\ensuremath’ 18 Page styles 18.1 ‘\maketitle’ 18.2 ‘\pagenumbering’ 18.3 ‘\pagestyle’ 18.4 ‘\thispagestyle’ 19 Spaces 19.1 ‘\enspace’ & ‘\quad’ & ‘\qquad’ 19.2 ‘\hspace’ 19.3 ‘\hfill’ 19.4 ‘\hss’ 19.5 ‘\spacefactor’ 19.5.1 ‘\@’ 19.5.2 ‘\frenchspacing’ & ‘\nonfrenchspacing’ 19.5.3 ‘\normalsfcodes’ 19.6 Backslash-space, ‘\ ’ 19.7 ‘~’ 19.8 ‘\thinspace’ & ‘\negthinspace’ 19.9 ‘\/’ 19.10 ‘\hrulefill’ & ‘\dotfill’ 19.11 ‘\bigskip’ & ‘\medskip’ & ‘\smallskip’ 19.12 ‘\bigbreak’ & ‘\medbreak’ & ‘\smallbreak’ 19.13 ‘\strut’ 19.14 ‘\vspace’ 19.15 ‘\vfill’ 19.16 ‘\addvspace’ 20 Boxes 20.1 ‘\mbox’ & ‘\makebox’ 20.2 ‘\fbox’ & ‘\framebox’ 20.3 ‘\parbox’ 20.4 ‘\raisebox’ 20.5 ‘\sbox’ & ‘\savebox’ 20.6 ‘lrbox’ 20.7 ‘\usebox’ 21 Color 21.1 ‘color’ package options 21.2 Color models 21.3 Commands for color 21.3.1 Define colors 21.3.2 Colored text 21.3.3 Colored boxes 21.3.4 Colored pages 22 Graphics 22.1 ‘graphics’ package options 22.2 ‘graphics’ package configuration 22.2.1 ‘\graphicspath’ 22.2.2 ‘\DeclareGraphicsExtensions’ 22.2.3 ‘\DeclareGraphicsRule’ 22.3 Commands for graphics 22.3.1 ‘\includegraphics’ 22.3.2 ‘\rotatebox’ 22.3.3 ‘\scalebox’ 22.3.4 ‘\resizebox’ 23 Special insertions 23.1 Reserved characters 23.2 Upper and lower case 23.3 Symbols by font position 23.4 Text symbols 23.5 Accents 23.5.1 ‘\accent’ 23.6 Additional Latin letters 23.7 ‘inputenc’ package 23.8 ‘\rule’ 23.9 ‘\today’ 24 Splitting the input 24.1 ‘\endinput’ 24.2 ‘\include’ & ‘\includeonly’ 24.3 ‘\input’ 25 Front/back matter 25.1 Table of contents, list of figures, list of tables 25.1.1 ‘\@dottedtocline’ 25.1.2 ‘\addcontentsline’ 25.1.3 ‘\addtocontents’ 25.1.4 ‘\contentsline’ 25.1.5 ‘\nofiles’ 25.1.6 ‘\numberline’ 25.2 Indexes 25.2.1 Produce the index manually 25.2.2 ‘\index’ 25.2.3 ‘makeindex’ 25.2.4 ‘\printindex’ 25.3 Glossaries 25.3.1 ‘\newglossaryentry’ 25.3.2 ‘\gls’ 26 Letters 26.1 ‘\address’ 26.2 ‘\cc’ 26.3 ‘\closing’ 26.4 ‘\encl’ 26.5 ‘\location’ 26.6 ‘\makelabels’ 26.7 ‘\name’ 26.8 ‘\opening’ 26.9 ‘\ps’ 26.10 ‘\signature’ 26.11 ‘\telephone’ 27 Input/output 27.1 ‘\openin’ & ‘\openout’ 27.2 ‘\read’ 27.3 ‘\typein’ 27.4 ‘\typeout’ 27.5 ‘\write’ 27.5.1 ‘\write’ and security 27.5.2 ‘\message’ 27.5.3 ‘\wlog’ 27.5.4 ‘\write18’ 28 Command line interface 28.1 Command line options 28.2 Command line input 28.3 Jobname 28.4 Recovering from errors Appendix A Document templates A.1 ‘beamer’ template A.2 ‘article’ template A.3 ‘book’ template A.4 Larger ‘book’ template Index LaTeX2e: An unofficial reference manual *************************************** This document is an unofficial reference manual (version of January 2023) for LaTeX2e, a document preparation system. 1 About this document ********************* This is an unofficial reference manual for the LaTeX2e document preparation system, which is a macro package for the TeX typesetting program (*note Overview::). This document’s home page is ; it has separate web pages for each topic. Alternatively. has the entire document on a single page. For other output formats, the sources, and plenty more information, see . In this document, we will mostly just use ‘LaTeX’ rather than ‘LaTeX2e’, since the previous version of LaTeX (2.09) was frozen decades ago. LaTeX is maintained by a group of volunteers (). The official documentation written by the LaTeX project is available from their web site. The present document is completely unofficial and has not been written or reviewed by the LaTeX maintainers. Do not send bug reports or anything else about this document to them. Instead, please send all comments to . This document is a reference, not a tutorial. There is a vast array of other information available about LaTeX, at all levels. Here are a few introductions. Two pages of recommended references to LaTeX documentation. Writing your first document, with a bit of both text and math. A longer introduction to LaTeX, translated to many languages. Introduction to the TeX system, including LaTeX, with further references. 2 Overview of LaTeX ******************* LaTeX is a system for typesetting documents. It was originally created by Leslie Lamport in 1984, but has been maintained by a group of volunteers for many years now (). It is widely used, particularly but not exclusively for mathematical and technical documents. A LaTeX user writes an input file containing text to be typeset along with interspersed commands. The default encoding for the text is UTF-8 (as of 2018). The commands specify, for example, how the text should be formatted. LaTeX is implemented as a set of related so-called “macros” which use Donald E. Knuth’s TeX typesetting program or one of its derivatives, collectively known as “engines”. Thus, the user produces output, typically PDF, by giving the input file to a TeX engine. (The following sections describe all this in more detail.) The term LaTeX is also sometimes used to mean the language in which the input document is marked up, that is, to mean the set of commands available to a LaTeX user. The name LaTeX is short for “Lamport TeX”. It is pronounced LAH-teck or LAY-teck, or sometimes LAY-tecks. Inside a document, produce the logo with ‘\LaTeX’. Where use of the logo is not sensible, such as in plain text, write it as ‘LaTeX’. 2.1 Starting and ending ======================= LaTeX files have a simple global structure, with a standard beginning and ending. This is a small example. \documentclass{article} \begin{document} Hello, \LaTeX\ world. \end{document} Every LaTeX document has a ‘\begin{document}’ line and an ‘\end{document}’ line. Here, the ‘article’ is the “document class”. It is implemented in a file ‘article.cls’. You can use any document class on your system. A few document classes are defined by LaTeX itself, and vast array of others are widely available. *Note Document classes::. You can include other LaTeX commands between the ‘\documentclass’ and the ‘\begin{document}’ commands. This area is called the “preamble”. The ‘\begin{document}’, ‘\end{document}’ pair defines an “environment”; the ‘document’ environment (and no others) is required in all LaTeX documents (*note document::). LaTeX make available to you many environments that are documented here (*note Environments::). Many more are available to you from external packages, most importantly those available at CTAN (*note CTAN::). The following sections discuss how to produce PDF or other output from a LaTeX input file. 2.2 Output files ================ LaTeX produces a main output file and at least two auxiliary files. The main output file’s name ends in either ‘.dvi’ or ‘.pdf’. ‘.dvi’ If LaTeX is invoked with the system command ‘latex’ then it produces a DeVice Independent file, with extension ‘.dvi’. You can view this file with a command such as ‘xdvi’, or convert it to a PostScript ‘.ps’ file with ‘dvips’ or to a Portable Document Format ‘.pdf’ file with ‘dvipdfmx’. The contents of the file can be dumped in human-readable form with ‘dvitype’. A vast array of other DVI utility programs are available (). ‘.pdf’ If LaTeX is invoked via the system command ‘pdflatex’, among other commands (*note TeX engines::), then the main output is a Portable Document Format (PDF) file. Typically this is a self-contained file, with all fonts and images included. LaTeX always produces at least two additional files. ‘.log’ This transcript file contains summary information such as a list of loaded packages. It also includes diagnostic messages and perhaps additional information for any errors. ‘.aux’ Auxiliary information is used by LaTeX for things such as cross references. For example, the first time that LaTeX finds a forward reference—a cross reference to something that has not yet appeared in the source—it will appear in the output as a doubled question mark ‘??’. When the referred-to spot does eventually appear in the source then LaTeX writes its location information to this ‘.aux’ file. On the next invocation, LaTeX reads the location information from this file and uses it to resolve the reference, replacing the double question mark with the remembered location. LaTeX may produce yet more files, characterized by the filename ending. These include a ‘.lof’ file that is used to make a list of figures, a ‘.lot’ file used to make a list of tables, and a ‘.toc’ file used to make a table of contents (*note Table of contents etc.::). A particular class may create others; the list is open-ended. 2.3 TeX engines =============== LaTeX is a large set of commands that is executed by a TeX program (*note Overview::). Such a set of commands is called a “format”, and is embodied in a binary ‘.fmt’ file, which can be read much more quickly than the corresponding TeX source. This section gives a terse overview of the TeX programs that are commonly available (see also *note Command line interface::). ‘latex’ ‘pdflatex’ In TeX Live (), if LaTeX is invoked via either the system command ‘latex’ or ‘pdflatex’, then the pdfTeX engine is run (). When invoked as ‘latex’, the main output is a ‘.dvi’ file; as ‘pdflatex’, the main output is a ‘.pdf’ file. pdfTeX incorporates the e-TeX extensions to Knuth’s original program (), including additional programming features and bi-directional typesetting, and has plenty of extensions of its own. e-TeX is available on its own as the system command ‘etex’, but this is plain TeX (and produces ‘.dvi’). In other TeX distributions, ‘latex’ may invoke e-TeX rather than pdfTeX. In any case, the e-TeX extensions can be assumed to be available in LaTeX. ‘lualatex’ If LaTeX is invoked via the system command ‘lualatex’, the LuaTeX engine is run (). This program allows code written in the scripting language Lua () to interact with TeX’s typesetting. LuaTeX handles UTF-8 Unicode input natively, can handle OpenType and TrueType fonts, and produces a ‘.pdf’ file by default. There is also ‘dvilualatex’ to produce a ‘.dvi’ file. ‘xelatex’ If LaTeX is invoked with the system command ‘xelatex’, the XeTeX engine is run (). Like LuaTeX, XeTeX natively supports UTF-8 Unicode and TrueType and OpenType fonts, though the implementation is completely different, mainly using external libraries instead of internal code. XeTeX produces a ‘.pdf’ file as output; it does not support DVI output. Internally, XeTeX creates an ‘.xdv’ file, a variant of DVI, and translates that to PDF using the (‘x’)‘dvipdfmx’ program, but this process is automatic. The ‘.xdv’ file is only useful for debugging. ‘platex’ ‘uplatex’ These commands provide significant additional support for Japanese and other languages; the ‘u’ variant supports Unicode. See and . As of 2019, there is a companion ‘-dev’ command and format for all of the above: ‘dvilualatex-dev’ ‘latex-dev’ ‘lualatex-dev’ ‘pdflatex-dev’ ‘platex-dev’ ‘uplatex-dev’ ‘xelatex-dev’ These are candidates for an upcoming LaTeX release. The main purpose is to find and address compatibility problems before an official release. These ‘-dev’ formats make it easy for anyone to help test documents and code: you can run, say, ‘pdflatex-dev’ instead of ‘pdflatex’, without changing anything else in your environment. Indeed, it is easiest and most helpful to always run the ‘-dev’ versions instead of bothering to switch back and forth. During quiet times after a release, the commands will be equivalent. These are not daily snapshots or untested development code. They undergo the same extensive regression testing by the LaTeX team before being released. For more information, see “The LaTeX release workflow and the LaTeX ‘dev’ formats” by Frank Mittelbach, ‘TUGboat’ 40:2, . 2.4 LaTeX command syntax ======================== In the LaTeX input file, a command name starts with a backslash character, ‘\’. The name itself then consists of either (a) a string of letters or (b) a single non-letter. LaTeX commands names are case sensitive so that ‘\pagebreak’ differs from ‘\Pagebreak’ (the latter is not a standard command). Most command names are lowercase, but in any event you must enter all commands in the same case as they are defined. A command may be followed by zero, one, or more arguments. These arguments may be either required or optional. Required arguments are contained in curly braces, ‘{...}’. Optional arguments are contained in square brackets, ‘[...]’. Generally, but not universally, if the command accepts an optional argument, it comes first, before any required arguments. Inside of an optional argument, to use the character close square bracket (‘]’) hide it inside curly braces, as in ‘\item[closing bracket {]}]’. Similarly, if an optional argument comes last, with no required argument after it, then to make the first character of the following text be an open square bracket, hide it inside curly braces. LaTeX has the convention that some commands have a ‘*’ form that is related to the form without a ‘*’, such as ‘\chapter’ and ‘\chapter*’. The exact difference in behavior varies from command to command. This manual describes all accepted options and ‘*’-forms for the commands it covers (barring unintentional omissions, a.k.a. bugs). As of the 2020-10-01 release of LaTeX, the ‘expl3’ and ‘xparse’ packages are part of the LaTeX2e format. They provide a completely different underlying programming language syntax. We won’t try to cover them in this document; see the related package documentation and other LaTeX manuals. 2.5 Environment =============== Synopsis: \begin{ENVIRONMENT-NAME} ... \end{ENVIRONMENT-NAME} An “environment” is an area of LaTeX source, inside of which there is a distinct behavior. For instance, for poetry in LaTeX put the lines between ‘\begin{verse}’ and ‘\end{verse}’. \begin{verse} There once was a man from Nantucket \\ ... \end{verse} *Note Environments::, for a list of environments. Particularly notable is that every LaTeX document must have a ‘document’ environment, a ‘\begin{document} ... \end{document}’ pair. The ENVIRONMENT-NAME at the beginning must exactly match that at the end. This includes the case where ENVIRONMENT-NAME ends in a star (‘*’); both the ‘\begin’ and ‘\end’ texts must include the star. Environments may have arguments, including optional arguments. This example produces a table. The first argument is optional (and causes the table to be aligned on its top row) while the second argument is required (it specifies the formatting of columns). \begin{tabular}[t]{r|l} ... rows of table ... \end{tabular} 2.6 CTAN: The Comprehensive TeX Archive Network =============================================== The Comprehensive TeX Archive Network, CTAN, is the TeX and LaTeX community’s repository of free material. It is a set of Internet sites around the world that offer material related to LaTeX for download. Visit CTAN on the web at . This material is organized into packages, discrete bundles that typically offer some coherent functionality and are maintained by one person or a small number of people. For instance, many publishers have a package that allows authors to format papers to that publisher’s specifications. In addition to the massive holdings, the ‘ctan.org’ web site offers features such as search by name or by functionality. CTAN is not a single host, but instead is a set of hosts, one of which is the so-called “master”. The master host actively manages the material, for instance, by accepting uploads of new or updated packages. For many years, it has been hosted by the German TeX group, DANTE e.V. Other sites around the world help out by mirroring, that is, automatically syncing their collections with the master site and then in turn making their copies publicly available. This gives users close to their location better access and relieves the load on the master site. The list of mirrors is at . 3 Document classes ****************** The document’s overall class is defined with this command, which is normally the first command in a LaTeX source file. \documentclass[OPTIONS]{CLASS} The following document CLASS names are built into LaTeX. (Many other document classes are available as separate packages; *note Overview::.) ‘article’ For a journal article, a presentation, and miscellaneous general use. ‘book’ Full-length books, including chapters and possibly including front matter, such as a preface, and back matter, such as an appendix (*note Front/back matter::). ‘letter’ Mail, optionally including mailing labels (*note Letters::). ‘report’ For documents of length between an ‘article’ and a ‘book’, such as technical reports or theses, which may contain several chapters. ‘slides’ For slide presentations—rarely used nowadays. The ‘beamer’ package is perhaps the most prevalent (). *Note beamer template::, for a small template for a beamer document. Standard OPTIONS are described in the next section. 3.1 Document class options ========================== You can specify “global options” or “class options” to the ‘\documentclass’ command by enclosing them in square brackets. To specify more than one OPTION, separate them with a comma. \documentclass[OPTION1,OPTION2,...]{CLASS} Here is the list of the standard class options. All of the standard classes except ‘slides’ accept the following options for selecting the typeface size (default is ‘10pt’): 10pt 11pt 12pt All of the standard classes accept these options for selecting the paper size (these show height by width): ‘a4paper’ 210 by 297mm (about 8.25 by 11.75 inches) ‘a5paper’ 148 by 210mm (about 5.8 by 8.3 inches) ‘b5paper’ 176 by 250mm (about 6.9 by 9.8 inches) ‘executivepaper’ 7.25 by 10.5 inches ‘legalpaper’ 8.5 by 14 inches ‘letterpaper’ 8.5 by 11 inches (the default) When using one of the engines pdfLaTeX, LuaLaTeX, or XeLaTeX (*note TeX engines::), options other than ‘letterpaper’ set the print area but you must also set the physical paper size. One way to do that is to put ‘\pdfpagewidth=\paperwidth’ and ‘\pdfpageheight=\paperheight’ in your document’s preamble. The ‘geometry’ package provides flexible ways of setting the print area and physical page size. Miscellaneous other options: ‘draft’ ‘final’ Mark (‘draft’) or do not mark (‘final’) overfull boxes with a black box in the margin; default is ‘final’. ‘fleqn’ Put displayed formulas flush left; default is centered. ‘landscape’ Selects landscape format; default is portrait. ‘leqno’ Put equation numbers on the left side of equations; default is the right side. ‘openbib’ Use “open” bibliography format. ‘titlepage’ ‘notitlepage’ Specifies whether there is a separate page for the title information and for the abstract also, if there is one. The default for the ‘report’ class is ‘titlepage’, for the other classes it is ‘notitlepage’. The following options are not available with the ‘slides’ class. ‘onecolumn’ ‘twocolumn’ Typeset in one or two columns; default is ‘onecolumn’. ‘oneside’ ‘twoside’ Selects one- or two-sided layout; default is ‘oneside’, except that in the ‘book’ class the default is ‘twoside’. For one-sided printing, the text is centered on the page. For two-sided printing, the ‘\evensidemargin’ (‘\oddsidemargin’) parameter determines the distance on even (odd) numbered pages between the left side of the page and the text’s left margin, with ‘\oddsidemargin’ being 40% of the difference between ‘\paperwidth’ and ‘\textwidth’, and ‘\evensidemargin’ is the remainder. ‘openright’ ‘openany’ Determines if a chapter should start on a right-hand page; default is ‘openright’ for ‘book’, and ‘openany’ for ‘report’. The ‘slides’ class offers the option ‘clock’ for printing the time at the bottom of each note. 3.2 Additional packages ======================= Load a package PKG, with the package options given in the comma-separated list OPTIONS, as here. \usepackage[OPTIONS]{PKG}. To specify more than one package you can separate them with a comma, as in ‘\usepackage{PKG1,PKG2,...}’, or use multiple ‘\usepackage’ commands. Any options given in the ‘\documentclass’ command that are unknown to the selected document class are passed on to the packages loaded with ‘\usepackage’. 3.3 Class and package construction ================================== You can create new document classes and new packages. For instance, if your memos must satisfy some local requirements, such as a standard header for each page, then you could create a new class ‘smcmemo.cls’ and begin your documents with ‘\documentclass{smcmemo}’. What separates a package from a document class is that the commands in a package are useful across classes while those in a document class are specific to that class. Thus, a command to set page headers is for a package while a command to make the page headers say ‘Memo from the SMC Math Department’ is for a class. Inside of a class or package file you can use the at-sign ‘@’ as a character in command names without having to surround the code containing that command with ‘\makeatletter’ and ‘\makeatother’. *Note \makeatletter & \makeatother::. This allow you to create commands that users will not accidentally redefine. Another technique is to preface class- or package-specific commands with some string to prevent your class or package from interfering with others. For instance, the class ‘smcmemo’ might have commands ‘\smc@tolist’, ‘\smc@fromlist’, etc. 3.3.1 Class and package structure --------------------------------- A class file or package file typically has four parts. 1. In the “identification part”, the file says that it is a LaTeX package or class and describes itself, using the ‘\NeedsTeXFormat’ and ‘\ProvidesClass’ or ‘\ProvidesPackage’ commands. 2. The “preliminary declarations part” declares some commands and can also load other files. Usually these commands will be those needed for the code used in the next part. For example, an ‘smcmemo’ class might be called with an option to read in a file with a list of people for the to-head, as ‘\documentclass[mathto]{smcmemo}’, and therefore needs to define a command ‘\newcommand{\setto}[1]{\def\@tolist{#1}}’ used in that file. 3. In the “handle options part” the class or package declares and processes its options. Class options allow a user to start their document as ‘\documentclass[OPTION LIST]{CLASS NAME}’, to modify the behavior of the class. An example is when you declare ‘\documentclass[11pt]{article}’ to set the default document font size. 4. Finally, in the “more declarations part” the class or package usually does most of its work: declaring new variables, commands and fonts, and loading other files. Here is a starting class file, which should be saved as ‘stub.cls’ where LaTeX can find it, for example in the same directory as the ‘.tex’ file. \NeedsTeXFormat{LaTeX2e} \ProvidesClass{stub}[2017/07/06 stub to start building classes from] \DeclareOption*{\PassOptionsToClass{\CurrentOption}{article}} \ProcessOptions\relax \LoadClass{article} It identifies itself, handles the class options via the default of passing them all to the ‘article’ class, and then loads the ‘article’ class to provide the basis for this class’s code. For more, see the official guide for class and package writers, the Class Guide, at (much of the descriptions here derive from this document), or the tutorial . 3.3.2 Class and package commands -------------------------------- These are the commands designed to help writers of classes or packages. ‘\AtBeginDvi{specials}’ Save in a box register things that are written to the ‘.dvi’ file at the beginning of the shipout of the first page of the document. ‘\AtEndOfClass{CODE}’ ‘\AtEndOfPackage{CODE}’ Hook to insert CODE to be executed when LaTeX finishes processing the current class or package. You can use these hooks multiple times; the ‘code’ will be executed in the order that you called it. See also *note \AtBeginDocument::. ‘\CheckCommand{CMD}[NUM][DEFAULT]{DEFINITION}’ ‘\CheckCommand*{CMD}[NUM][DEFAULT]{DEFINITION}’ Like ‘\newcommand’ (*note \newcommand & \renewcommand::) but does not define CMD; instead it checks that the current definition of CMD is exactly as given by DEFINITION and is or is not “long” as expected. A long command is a command that accepts ‘\par’ within an argument. The CMD command is expected to be long with the unstarred version of ‘\CheckCommand’. Raises an error when the check fails. This allows you to check before you start redefining ‘cmd’ yourself that no other package has already redefined this command. ‘\ClassError{CLASS NAME}{ERROR TEXT}{HELP TEXT}’ ‘\ClassWarning{CLASS NAME}{WARNING TEXT}’ ‘\ClassWarningNoLine{CLASS NAME}{WARNING TEXT}’ ‘\ClassInfo{CLASS NAME}{INFO TEXT}’ ‘\ClassInfoNoLine{CLASS NAME}{INFO TEXT}’ ‘\PackageError{PACKAGE NAME}{ERROR TEXT}{HELP TEXT}’ ‘\PackageWarning{PACKAGE NAME}{WARNING TEXT}’ ‘\PackageWarningNoLine{PACKAGE NAME}{WARNING TEXT}’ ‘\PackageInfo{PACKAGE NAME}{INFO TEXT}’ ‘\PackageInfoNoLine{PACKAGE NAME}{INFO TEXT}’ Produce an error message, or warning or informational messages. For ‘\ClassError’ and ‘\PackageError’ the message is ERROR TEXT, followed by TeX’s ‘?’ error prompt. If the user then asks for help by typing ‘h’, they see the HELP TEXT. The four warning commands are similar except that they write WARNING TEXT on the screen with no error prompt. The four info commands write INFO TEXT only in the transcript file. The ‘NoLine’ versions do not show the number of the line generating the message, while the other versions do show that number. To format the messages, including the HELP TEXT: use ‘\protect’ to stop a command from expanding, get a line break with ‘\MessageBreak’, and get a space with ‘\space’ when a space character does not allow it, like after a command. Note that LaTeX appends a period to the messages. ‘\CurrentOption’ Expands to the name of the currently-being-processed option. Can only be used within the CODE argument of either ‘\DeclareOption’ or ‘\DeclareOption*’. ‘\DeclareOption{OPTION}{CODE}’ ‘\DeclareOption*{CODE}’ Make an option available to a user to invoke in their ‘\documentclass’ command. For example, the ‘smcmemo’ class could have an option ‘\documentclass[logo]{smcmemo}’ allowing users to put the institutional logo on the first page. The class file must contain ‘\DeclareOption{logo}{CODE}’ (and later, ‘\ProcessOptions’). If you request an option that has not been declared, by default this will produce a warning like ‘Unused global option(s): [badoption].’ Change this behavior with the starred version ‘\DeclareOption*{CODE}’. For example, many classes extend an existing class, using a command such as ‘\LoadClass{article}’, and for passing extra options to the underlying class use code such as this. \DeclareOption*{% \PassOptionsToClass{\CurrentOption}{article}% } Another example is that the class ‘smcmemo’ may allow users to keep lists of memo recipients in external files. Then the user could invoke ‘\documentclass[math]{smcmemo}’ and it will read the file ‘math.memo’. This code handles the file if it exists and otherwise passes the option to the ‘article’ class. \DeclareOption*{\InputIfFileExists{\CurrentOption.memo}{}{% \PassOptionsToClass{\CurrentOption}{article}}} ‘\DeclareRobustCommand{CMD}[NUM][DEFAULT]{DEFINITION}’ ‘* \DeclareRobustCommand*{CMD}[NUM][DEFAULT]{DEFINITION}’ Like ‘\newcommand’ and ‘\newcommand*’ (*note \newcommand & \renewcommand::) but these declare a robust command, even if some code within the DEFINITION is fragile. (For a discussion of robust and fragile commands *note \protect::.) Use this command to define new robust commands or to redefine existing commands and make them robust. Unlike ‘\newcommand’ these do not give an error if macro CMD already exists; instead, a log message is put into the transcript file if a command is redefined. Commands defined this way are a bit less efficient than those defined using ‘\newcommand’ so unless the command’s data is fragile and the command is used within a moving argument, use ‘\newcommand’. The ‘etoolbox’ package offers the commands ‘\newrobustcmd’, ‘\newrobustcmd*’, as well as the commands ‘\renewrobustcmd’, ‘\renewrobustcmd*’, and the commands ‘\providerobustcmd’, and ‘\providerobustcmd*’. These are similar to ‘\newcommand’, ‘\newcommand*’, ‘\renewcommand’, ‘\renewcommand*’, ‘\providecommand’, and ‘\providecommand*’, but define a robust CMD with two advantages as compared to ‘\DeclareRobustCommand’: 1. They use the low-level e-TeX protection mechanism rather than the higher level LaTeX ‘\protect’ mechanism, so they do not incur the slight loss of performance mentioned above, and 2. They make the same distinction between ‘\new...’, ‘\renew...’, and ‘\provide...’, as the standard commands, so they do not just make a log message when you redefine CMD that already exists, in that case you need to use either ‘\renew...’ or ‘\provide...’ or you get an error. ‘\IfFileExists{FILENAME}{TRUE CODE}{FALSE CODE}’ ‘\InputIfFileExists{FILENAME}{TRUE CODE}{FALSE CODE}’ Execute TRUE CODE if LaTeX finds the file ‘FILE NAME’ or FALSE CODE otherwise. In the first case it executing TRUE CODE and then inputs the file. Thus the command \IfFileExists{img.pdf}{% \includegraphics{img.pdf}}{\typeout{!! img.pdf not found} will include the graphic ‘img.pdf’ if it is found and otherwise give a warning. This command looks for the file in all search paths that LaTeX uses, not only in the current directory. To look only in the current directory do something like ‘\IfFileExists{./filename}{TRUE CODE}{FALSE CODE}’. If you ask for a filename without a ‘.tex’ extension then LaTeX will first look for the file by appending the ‘.tex’; for more on how LaTeX handles file extensions see *note \input::. ‘\LoadClass[OPTIONS LIST]{CLASS NAME}[RELEASE DATE]’ ‘\LoadClassWithOptions{CLASS NAME}[RELEASE DATE]’ Load a class, as with ‘\documentclass[OPTIONS LIST]{CLASS NAME}[RELEASE INFO]’. An example is ‘\LoadClass[twoside]{article}’. The OPTIONS LIST, if present, is a comma-separated list. The RELEASE DATE is optional. If present it must have the form YYYY/MM/DD. If you request a RELEASE DATE and the date of the package installed on your system is earlier, then you get a warning on the screen and in the log like this. You have requested, on input line 4, version `2038/01/19' of document class article, but only version `2014/09/29 v1.4h Standard LaTeX document class' is available. The command version ‘\LoadClassWithOptions’ uses the list of options for the current class. This means it ignores any options passed to it via ‘\PassOptionsToClass’. This is a convenience command that lets you build classes on existing ones, such as the standard ‘article’ class, without having to track which options were passed. ‘\ExecuteOptions{OPTIONS-LIST}’ For each option OPTION in the OPTIONS-LIST, in order, this command executes the command ‘\ds@OPTION’. If this command is not defined then that option is silently ignored. It can be used to provide a default option list before ‘\ProcessOptions’. For example, if in a class file you want the default to be 11pt fonts then you could specify ‘\ExecuteOptions{11pt}\ProcessOptions\relax’. ‘\NeedsTeXFormat{FORMAT}[FORMAT DATE]’ Specifies the format that this class must be run under. Often issued as the first line of a class file, and most often used as: ‘\NeedsTeXFormat{LaTeX2e}’. When a document using that class is processed, the format name given here must match the format that is actually being run (including that the FORMAT string is case sensitive). If it does not match then execution stops with an error like ‘This file needs format `LaTeX2e' but this is `xxx'.’ To specify a version of the format that you know to have certain features, include the optional FORMAT DATE on which those features were implemented. If present it must be in the form ‘YYYY/MM/DD’. If the format version installed on your system is earlier than FORMAT DATE then you get a warning like this. You have requested release `2038/01/20' of LaTeX, but only release `2016/02/01' is available. ‘\OptionNotUsed’ Adds the current option to the list of unused options. Can only be used within the CODE argument of either ‘\DeclareOption’ or ‘\DeclareOption*’. ‘\PassOptionsToClass{OPTION LIST}{CLASS NAME}’ ‘\PassOptionsToPackage{OPTION LIST}{PACKAGE NAME}’ Adds the options in the comma-separated list OPTION LIST to the options used by any future ‘\RequirePackage’ or ‘\usepackage’ command for package PACKAGE NAME or the class CLASS NAME. The reason for these commands is: you may load a package any number of times with no options but if you want options then you may only supply them when you first load the package. Loading a package with options more than once will get you an error like ‘Option clash for package foo.’ (LaTeX throws an error even if there is no conflict between the options.) If your own code is bringing in a package twice then you can collapse that to once, for example replacing the two ‘\RequirePackage[landscape]{geometry}’ and ‘\RequirePackage[margins=1in]{geometry}’ with the single command ‘\RequirePackage[landscape,margins=1in]{geometry}’. However, imagine that you are loading ‘firstpkg’ and inside that package it loads ‘secondpkg’, and you need the second package to be loaded with option ‘draft’. Then before doing the first package you must queue up the options for the second package, like this. \PassOptionsToPackage{draft}{secondpkg} \RequirePackage{firstpkg} (If ‘firstpkg.sty’ loads an option in conflict with what you want then you may have to alter its source.) These commands are useful for general users as well as class and package writers. For instance, suppose a user wants to load the ‘graphicx’ package with the option ‘draft’ and also wants to use a class ‘foo’ that loads the ‘graphicx’ package, but without that option. The user could start their LaTeX file with ‘\PassOptionsToPackage{draft}{graphicx}\documentclass{foo}’. ‘\ProcessOptions’ ‘\ProcessOptions*\@OPTIONS’ Execute the code for each option that the user has invoked. Include it in the class file as ‘\ProcessOptions\relax’ (because of the existence of the starred command). Options come in two types. “Local options” have been specified for this particular package in the OPTIONS argument of ‘\PassOptionsToPackage{OPTIONS}’, ‘\usepackage[OPTIONS]’, or ‘\RequirePackage[OPTIONS]’. “Global options” are those given by the class user in ‘\documentclass[OPTIONS]’ (If an option is specified both locally and globally then it is local.) When ‘\ProcessOptions’ is called for a package ‘pkg.sty’, the following happens: 1. For each option OPTION so far declared with ‘\DeclareOption’, it looks to see if that option is either a global or a local option for ‘pkg’. If so then it executes the declared code. This is done in the order in which these options were given in ‘pkg.sty’. 2. For each remaining local option, it executes the command ‘\ds@’OPTION if it has been defined somewhere (other than by a ‘\DeclareOption’); otherwise, it executes the default option code given in ‘\DeclareOption*’. If no default option code has been declared then it gives an error message. This is done in the order in which these options were specified. When ‘\ProcessOptions’ is called for a class it works in the same way except that all options are local, and the default CODE for ‘\DeclareOption*’ is ‘\OptionNotUsed’ rather than an error. The starred version ‘\ProcessOptions*’ executes the options in the order specified in the calling commands, rather than in the order of declaration in the class or package. For a package this means that the global options are processed first. ‘\ProvidesClass{CLASS NAME}[RELEASE DATE BRIEF ADDITIONAL INFORMATION]’ ‘\ProvidesClass{CLASS NAME}[RELEASE DATE]’ ‘\ProvidesPackage{PACKAGE NAME}[RELEASE DATE BRIEF ADDITIONAL INFORMATION]’ ‘\ProvidesPackage{PACKAGE NAME}[RELEASE DATE]’ Identifies the class or package, printing a message to the screen and the log file. When you load a class or package, for example with ‘\documentclass{smcmemo}’ or ‘\usepackage{test}’, LaTeX inputs a file. If the name of the file does not match the class or package name declared in it then you get a warning. Thus, if you invoke ‘\documentclass{smcmemo}’, and the file ‘smcmemo.cls’ has the statement ‘\ProvidesClass{xxx}’ then you get a warning like ‘You have requested document class `smcmemo', but the document class provides 'xxx'.’ This warning does not prevent LaTeX from processing the rest of the class file normally. If you include the optional argument then you must include a date, before any spaces, of the form ‘YYYY/MM/DD’. The rest of the optional argument is free-form, although it traditionally identifies the class, and is written to the screen during compilation and to the log file. Thus, if your file ‘smcmemo.cls’ contains the line ‘\ProvidesClass{smcmemo}[2008/06/01 v1.0 SMC memo class]’ and your document’s first line is ‘\documentclass{smcmemo}’ then you will see ‘Document Class: smcmemo 2008/06/01 v1.0 SMC memo class’. The date in the optional argument allows class and package users to ask to be warned if the version of the class or package is earlier than RELEASE DATE. For instance, a user could enter ‘\documentclass{smcmemo}[2018/10/12]’ or ‘\usepackage{foo}[[2017/07/07]]’ to require a class or package with certain features by specifying that it must be released no earlier than the given date. (Although, in practice package users only rarely include a date, and class users almost never do.) ‘\ProvidesFile{FILENAME}[ADDITIONAL INFORMATION]’ Declare a file other than the main class and package files, such as configuration files or font definition files. Put this command in that file and you get in the log a string like ‘File: test.config 2017/10/12 config file for test.cls’ for FILENAME equal to ‘test.config’ and ADDITIONAL INFORMATION equal to ‘2017/10/12 config file for test.cls’. ‘\RequirePackage[OPTION LIST]{PACKAGE NAME}[RELEASE DATE]’ ‘\RequirePackageWithOptions{PACKAGE NAME}[RELEASE DATE]’ Load a package, like the command ‘\usepackage’ (*note Additional packages::). The LaTeX development team strongly recommends use of these commands over Plain TeX’s ‘\input’; see the Class Guide. An example is ‘\RequirePackage[landscape,margin=1in]{geometry}’. The OPTION LIST, if present, is a comma-separated list. The RELEASE DATE, if present, must have the form YYYY/MM/DD. If the release date of the package as installed on your system is earlier than RELEASE DATE then you get a warning like ‘You have requested, on input line 9, version `2017/07/03' of package jhtest, but only version `2000/01/01' is available’. The ‘\RequirePackageWithOptions’ version uses the list of options for the current class. This means it ignores any options passed to it via ‘\PassOptionsToClass’. This is a convenience command to allow easily building classes on existing ones without having to track which options were passed. The difference between ‘\usepackage’ and ‘\RequirePackage’ is small. The ‘\usepackage’ command is intended for the document file while ‘\RequirePackage’ is intended for package and class files. Thus, using ‘\usepackage’ before the ‘\documentclass’ command causes LaTeX to give error like ‘\usepackage before \documentclass’, but you can use ‘\RequirePackage’ there. 4 Fonts ******* LaTeX comes with powerful font capacities. For one thing, its New Font Selection Scheme allows you to work easily with the font families in your document (for instance, see *note Font styles::). And, LaTeX documents can use most fonts that are available today, including versions of Times Roman, Helvetica, Courier, etc. (Note, though, that many fonts do not have support for mathematics.) The first typeface in the TeX world was the Computer Modern family, developed by Donald Knuth. It is the default for LaTeX documents and is still the most widely used. But changing to another font often only involves a few commands. For instance, putting the following in your preamble gives you a Palatino-like font, which is handsome and more readable online than many other fonts, while still allowing you to typeset mathematics. (This example is from Michael Sharpe, .) \usepackage[osf]{newpxtext} % osf for text, not math \usepackage{cabin} % sans serif \usepackage[varqu,varl]{inconsolata} % sans serif typewriter \usepackage[bigdelims,vvarbb]{newpxmath} % bb from STIX \usepackage[cal=boondoxo]{mathalfa} % mathcal In addition, the ‘xelatex’ or ‘lualatex’ engines allow you to use any fonts on your system that are in OpenType or TrueType format (*note TeX engines::). The LaTeX Font Catalogue () shows font sample graphics and copy-and-pasteable source to use many fonts, including many with support for mathematics. It aims to cover all Latin alphabet free fonts available for easy use with LaTeX. More information is also available from the TeX Users Group, at . 4.1 ‘fontenc’ package ===================== Synopsis: \usepackage[FONT_ENCODING]{fontenc} or \usepackage[FONT_ENCODING1, FONT_ENCODING2, ...]{fontenc} Specify the font encodings. A font encoding is a mapping of the character codes to the font glyphs that are used to typeset your output. This package only applies if you use the ‘pdflatex’ engine (*note TeX engines::). If you use the ‘xelatex’ or ‘lualatex’ engine then instead use the ‘fontspec’ package. TeX’s original font family, Computer Modern, has a limited character set. For instance, to make common accented characters you must use ‘\accent’ (*note \accent::) but this disables hyphenation. TeX users have agreed on a number of standards to access the larger sets of characters provided by modern fonts. If you are using ‘pdflatex’ then put this in the preamble \usepackage[T1]{fontenc} gives you support for the most widespread European languages, including French, German, Italian, Polish, and others. In particular, if you have words with accented letters then LaTeX will hyphenate them and your output can be copied and pasted. (The optional second line allows you to directly enter accented characters into your source file.) If you are using an encoding such as ‘T1’ and the characters appear blurry or do not magnify well then your fonts may be bitmapped, sometimes called raster or Type 3. You want vector fonts. Use a package such as ‘lmodern’ or ‘cm-super’ to get a font that extends LaTeX’s default using vector fonts. For each FONT_ENCODING given as an option but not already declared, this package loads the encoding definition files, named ‘FONT_ENCODINGenc.def’. It also sets ‘\encodingdefault’ to be the last encoding in the option list. These are the common values for FONT_ENCODING. ‘OT1’ The original encoding for TeX. Limited to mostly English characters. ‘OMS, OML’ Math symbols and math letters encoding. ‘T1’ TeX text extended. Sometimes called the Cork encoding for the Users Group meeting where it was developed. Gives access to most European accented characters. The most common option for this package. ‘TS1’ Text Companion encoding. LaTeX’s default is to load ‘OML’, ‘T1’, ‘OT1’, and then ‘OMS’, and set the default to ‘OT1’. Even if you do not use accented letters, you may need to specify a font encoding if your font requires it. If you use ‘T1’ encoded fonts other than the default Computer Modern family then you may need to load the package that selects your fonts before loading ‘fontenc’, to prevent the system from loading any ‘T1’ encoded fonts from the default. The LaTeX team reserve encoding names starting with: ‘T’ for the standard text encodings with 256 characters, ‘TS’ for symbols that extend the corresponding T encodings, ‘X’ for test encodings, ‘M’ for standard math encodings with 256 characters, ‘A’ for special applications, ‘OT’ for standard text encodings with 128 characters, and ‘OM’ for standard math encodings with 128 characters (‘O’ stands for ‘obsolete’). This package provides a number of commands, detailed below. Many of them are encoding-specific, so if you have defined a command that works for one encoding but the current encoding is different then the command is not in effect. 4.1.1 ‘\DeclareFontEncoding’ ---------------------------- Synopsis: \DeclareFontEncoding{ENCODING}{TEXT-SETTINGS}{MATH-SETTINGS} Declare the font encoding ENCODING. It also saves the value of ENCODING in ‘\LastDeclaredEncoding’ (*note \LastDeclaredEncoding::). The file ‘t1enc.def’ contains this line (followed by many others). \DeclareFontEncoding{T1}{}{} The TEXT-SETTINGS are the commands that LaTeX will run every time it switches from one encoding to another with the ‘\selectfont’ and ‘\fontencoding’ commands. The MATH-SETTINGS are the commands that LaTeX will use whenever the font is accessed as a math alphabet. LaTeX ignores any space characters inside TEXT-SETTINGS and MATH-SETTINGS, to prevent unintended spaces in the output. If you invent an encoding you should pick a two or three letter name starting with ‘L’ for ‘local’, or ‘E’ for ‘experimental’. Note that output encoding files may be read several times by LaTeX so using, e.g., ‘\newcommand’ may cause an error. In addition, such files should contain ‘\ProvidesFile’ line (*note Class and package commands::). Note also that you should use the ‘\...Default’ commands only in a package, not in the encoding definition files, since those files should only contain declarations specific to that encoding. 4.1.2 ‘\DeclareTextAccent’ -------------------------- Synopsis: \DeclareTextAccent{CMD}{ENCODING}{SLOT} Define an accent, to be put on top of other glyphs, in the encoding ENCODING at the location SLOT. A “slot” is the number identifying a glyph within a font. This line from ‘t1enc.def’ declares that to make a circumflex accent as in ‘\^A’, the system will put the accent in slot 2 over the ‘A’ character, which is represented in ASCII as 65. (This holds unless there is a relevant ‘DeclareTextComposite’ or ‘\DeclareTextCompositeCommand’ declaration; *note \DeclareTextComposite::.) \DeclareTextAccent{\^}{T1}{2} If CMD has already been defined then ‘\DeclareTextAccent’ does not give an error but it does log the redefinition in the transcript file. 4.1.3 ‘\DeclareTextAccentDefault’ --------------------------------- Synopsis: \DeclareTextAccentDefault{\CMD}{ENCODING} If there is an encoding-specific accent command \CMD but there is no associated ‘\DeclareTextAccent’ for that encoding then this command will pick up the slack, by saying to use it as described for ENCODING. For example, to make the encoding ‘OT1’ be the default encoding for the accent ‘\"’, declare this. \DeclareTextAccentDefault{\"}{OT1} If you issue a ‘\"’ when the current encoding does not have a definition for that accent then LaTeX will use the definition from ‘OT1’ That is, this command is equivalent to this call (*note \UseTextSymbol & \UseTextAccent::). \DeclareTextCommandDefault[1]{\CMD} {\UseTextAccent{ENCODING}{\CMD}{#1}} Note that ‘\DeclareTextAccentDefault’ works for any one-argument ‘fontenc’ command, not just the accent command. 4.1.4 ‘\DeclareTextCommand’ & ‘\ProvideTextCommand’ --------------------------------------------------- Synopsis, one of: \DeclareTextCommand{\CMD}{ENCODING}{DEFN} \DeclareTextCommand{\CMD}{ENCODING}[NARGS]{DEFN} \DeclareTextCommand{\CMD}{ENCODING}[NARGS][OPTARGDEFAULT]{DEFN} or one of: \ProvideTextCommand{\CMD}{ENCODING}{DEFN} \ProvideTextCommand{\CMD}{ENCODING}[NARGS]{DEFN} \ProvideTextCommand{\CMD}{ENCODING}[NARGS][OPTARGDEFAULT]{DEFN} Define the command ‘\CMD’, which will be specific to one encoding. The command name CMD must be preceded by a backslash, ‘\’. These commands can only appear in the preamble. Redefining \CMD does not cause an error. The defined command will be robust even if the code in DEFN is fragile (*note \protect::). For example, the file ‘t1enc.def’ contains this line. \DeclareTextCommand{\textperthousand}{T1}{\%\char 24 } With that, you can express parts per thousand. \usepackage[T1]{fontenc} % in preamble ... Legal limit is \( 0.8 \)\textperthousand. If you change the font encoding to ‘OT1’ then you get an error like ‘LaTeX Error: Command \textperthousand unavailable in encoding OT1’. The ‘\ProvideTextCommand’ variant does the same, except that it does nothing if ‘\CMD’ is already defined. The ‘\DeclareTextSymbol’ command is faster than this one for simple slot-to-glyph association (*note \DeclareTextSymbol::) The optional NARGS and OPTARGDEFAULT arguments play the same role here as in ‘\newcommand’ (*note \newcommand & \renewcommand::). Briefly, NARGS is an integer from 0 to 9 specifying the number of arguments that the defined command ‘\CMD’ takes. This number includes any optional argument. Omitting this argument is the same as specifying 0, meaning that ‘\CMD’ will have no arguments. And, if OPTARGDEFAULT is present then the first argument of ‘\CMD’ is optional, with default value OPTARGDEFAULT (which may be the empty string). If OPTARGDEFAULT is not present then ‘\CMD’ does not take an optional argument. 4.1.5 ‘\DeclareTextCommandDefault’ & ‘\ProvideTextCommandDefault ’ ------------------------------------------------------------------ Synopsis: \DeclareTextCommandDefault{\CMD}{DEFN} or: \ProvideTextCommandDefault{\CMD}{DEFN} Give a default definition for ‘\CMD’, for when that command is not defined in the encoding currently in force. This default should only use encodings known to be available. This makes ‘\copyright’ available. \DeclareTextCommandDefault{\copyright}{\textcircled{c}} It uses only an encoding (OMS) that is always available. The ‘\DeclareTextCommandDefault’ should not occur in the encoding definition files since those files should declare only commands for use when you select that encoding. It should instead be in a package. As with the related non-default commands, the ‘\ProvideTextCommandDefault’ has exactly the same behavior as ‘\DeclareTextCommandDefault’ except that it does nothing if ‘\CMD’ is already defined (*note \DeclareTextCommand & \ProvideTextCommand::). So, packages can use it to provide fallbacks that other packages can improve upon. 4.1.6 ‘\DeclareTextComposite’ ----------------------------- Synopsis: \DeclareTextComposite{\CMD}{ENCODING}{SIMPLE_OBJECT}{SLOT} Access an accented glyph directly, that is, without having to put an accent over a separate character. This line from ‘t1enc.def’ means that ‘\^o’ will cause LaTeX to typeset lowercase ‘o’ by taking the character directly from slot 224 in the font. \DeclareTextComposite{\^}{T1}{o}{244} *Note fontenc package::, for a list of common encodings. The SIMPLE_OBJECT should be a single character or a single command. The SLOT argument is usually a positive integer represented in decimal (although octal or hexadecimal are possible). Normally \CMD has already been declared for this encoding, either with ‘\DeclareTextAccent’ or with a one-argument ‘\DeclareTextCommand’. In ‘t1enc.def’, the above line follows the ‘\DeclareTextAccent{\^}{T1}{2}’ command. 4.1.7 ‘\DeclareTextCompositeCommand’ ------------------------------------ Synopsis: \DeclareTextCompositeCommand{\CMD}{ENCODING}{ARG}{CODE} A more general version of ‘\DeclareTextComposite’ that runs arbitrary code with ‘\CMD’. This allows accents on ‘i’ to act like accents on dotless i, ‘\i’. \DeclareTextCompositeCommand{\'}{OT1}{i}{\'\i} *Note fontenc package::, for a list of common encodings. Normally ‘\CMD’ will have already been declared with ‘\DeclareTextAccent’ or as a one argument ‘\DeclareTextCommand’. 4.1.8 ‘\DeclareTextSymbol’ -------------------------- Synopsis: \DeclareTextSymbol{\CMD}{ENCODING}{SLOT} Define a symbol in the encoding ENCODING at the location SLOT. Symbols defined in this way are for use in text, not mathematics. For example, this line from ‘t1enc.def’ declares the number of the glyph to use for «, the left guillemet. \DeclareTextSymbol{\guillemotleft}{T1}{19} The command ‘\DeclareTextCommand{\guillemotleft}{T1}{\char 19}’ has the same effect but is slower (*note \DeclareTextCommand & \ProvideTextCommand::). *Note fontenc package::, for a list of common encodings. The SLOT can be specified in decimal, or octal (as in ‘'023’), or hexadecimal (as in ‘"13’), although decimal has the advantage that single quote or double quote could be redefined by another package. If ‘\CMD’ has already been defined then ‘\DeclareTextSymbol’ does not give an error but it does log the redefinition in the transcript file. 4.1.9 ‘\DeclareTextSymbolDefault’ --------------------------------- Synopsis: \DeclareTextSymbolDefault{\CMD}{ENCODING} If there is an encoding-specific symbol command ‘\CMD’ but there is no associated ‘\DeclareTextSymbol’ for that encoding, then this command will pick up the slack, by saying to get the symbol as described for ENCODING. For example, to declare that if the current encoding has no meaning for ‘\textdollar’ then use the one from ‘OT1’, declare this. \DeclareTextSymbolDefault{\textdollar}{OT1} That is, this command is equivalent to this call (*note \UseTextSymbol & \UseTextAccent::). \DeclareTextCommandDefault{\CMD} {\UseTextSymbol{ENCODING}{\CMD}} Note that ‘\DeclareTextSymbolDefault’ can be used to define a default for any zero-argument ‘fontenc’ command. 4.1.10 ‘\LastDeclaredEncoding’ ------------------------------ Synopsis: \LastDeclaredEncoding Get the name of the most recently declared encoding. The ‘\DeclareFontEncoding’ command stores the name so that it can be retrieved with this command (*note \DeclareFontEncoding::). This relies on ‘\LastDeclaredEncoding’ rather than give the name of the encoding explicitly. \DeclareFontEncoding{JH1}{}{} \DeclareTextAccent{\'}{\LastDeclaredEncoding}{0} 4.1.11 ‘\UseTextSymbol’ & ‘\UseTextAccent’ ------------------------------------------ Synopsis: \UseTextSymbol{ENCODING}{\CMD} or: \UseTextAccent{ENCODING}{\CMD}{TEXT} Use a symbol or accent not from the current encoding. In general, to use a ‘fontenc’ command in an encoding where it is not defined, and if the command has no arguments, then you can use it like this: \UseTextSymbol{OT1}{\ss} which is equivalent to this (note the outer braces form a group, so LaTeX reverts back to the prior encoding after the ‘\ss’): {\fontencoding{OT1}\selectfont\ss} Similarly, to use a ‘fontenc’ command in an encoding where it is not defined, and if the command has one argument, you can use it like this: \UseTextAccent{OT1}{\'}{a} which is equivalent to this (again note the outer braces forming a group): {fontencoding{OT1}\selectfont\'{\fontencoding{ENC_IN_USE}\selectfont a}} Here, ENC_IN_USE is the encoding in force before this sequence of commands, so that ‘a’ is typeset using the current encoding and only the accent is taken from ‘OT1’. 4.2 Font styles =============== The following type style commands are supported by LaTeX. In the table below the listed commands, the ‘\text...’ commands, are used with an argument as in ‘\textit{TEXT}’. This is the preferred form. But shown after it in parenthesis is the corresponding “declaration form”, which is often useful. This form takes no arguments, as in ‘{\itshape TEXT}’. The scope of the declaration form lasts until the next type style command or the end of the current group. In addition, each has an environment form such as ‘\begin{itshape}...\end{itshape}’, which we’ll describe further at the end of the section. These commands, in any of the three forms, are cumulative; for instance you can get bold sans serif by saying either of ‘\sffamily\bfseries’ or ‘\bfseries\sffamily’. One advantage of these commands is that they automatically insert italic corrections if needed (*note \/::). Specifically, they insert the italic correction unless the following character is in the list ‘\nocorrlist’, which by default consists of period and comma. To suppress the automatic insertion of italic correction, use ‘\nocorr’ at the start or end of the command argument, such as ‘\textit{\nocorr text}’ or ‘\textsc{text \nocorr}’. ‘\textrm (\rmfamily)’ Roman. ‘\textit (\itshape)’ Italics. ‘\textmd (\mdseries)’ Medium weight (default). ‘\textbf (\bfseries)’ Boldface. ‘\textup (\upshape)’ Upright (default). ‘\textsl (\slshape)’ Slanted. ‘\textsf (\sffamily)’ Sans serif. ‘\textsc (\scshape)’ Small caps. ‘\texttt (\ttfamily)’ Typewriter. ‘\textnormal (\normalfont)’ Main document font. Although it also changes fonts, the ‘\emph{TEXT}’ command is semantic, for TEXT to be emphasized, and should not be used as a substitute for ‘\textit’. For example, ‘\emph{START TEXT \emph{MIDDLE TEXT} END TEXT}’ will result in the START TEXT and END TEXT in italics, but MIDDLE TEXT will be in roman. LaTeX also provides the following commands, which unconditionally switch to the given style, that is, are _not_ cumulative. They are used as declarations: ‘{\CMD...}’ instead of ‘\CMD{...}’. (The unconditional commands below are an older version of font switching. The earlier commands are an improvement in most circumstances. But sometimes an unconditional font switch is what is needed.) ‘\bf’ Switch to bold face. ‘\cal’ Switch to calligraphic letters for math. ‘\it’ Italics. ‘\rm’ Roman. ‘\sc’ Small caps. ‘\sf’ Sans serif. ‘\sl’ Slanted (oblique). ‘\tt’ Typewriter (monospace, fixed-width). The ‘\em’ command is the unconditional version of ‘\emph’. The following commands are for use in math mode. They are not cumulative, so ‘\mathbf{\mathit{SYMBOL}}’ does not create a boldface and italic SYMBOL; instead, it will just be in italics. This is because typically math symbols need consistent typographic treatment, regardless of the surrounding environment. ‘\mathrm’ Roman, for use in math mode. ‘\mathbf’ Boldface, for use in math mode. ‘\mathsf’ Sans serif, for use in math mode. ‘\mathtt’ Typewriter, for use in math mode. ‘\mathit’ ‘(\mit)’ Italics, for use in math mode. ‘\mathnormal’ For use in math mode, e.g., inside another type style declaration. ‘\mathcal’ Calligraphic letters, for use in math mode. In addition, the command ‘\mathversion{bold}’ can be used for switching to bold letters and symbols in formulas. ‘\mathversion{normal}’ restores the default. Finally, the command ‘\oldstylenums{NUMERALS}’ will typeset so-called “old-style” numerals, which have differing heights and depths (and sometimes widths) from the standard “lining” numerals, which all have the same height as uppercase letters. LaTeX’s default fonts support this, and will respect ‘\textbf’ (but not other styles; there are no italic old-style numerals in Computer Modern). Many other fonts have old-style numerals also; sometimes package options are provided to make them the default. FAQ entry: . 4.3 Font sizes ============== The following standard type size commands are supported by LaTeX. The table shows the command name and the corresponding actual font size used (in points) with the ‘10pt’, ‘11pt’, and ‘12pt’ document size options, respectively (*note Document class options::). Command ‘10pt’ ‘11pt’ ‘12pt’ -------------------------------------------------------- ‘\tiny’ 5 6 6 ‘\scriptsize’ 7 8 8 ‘\footnotesize’ 8 9 10 ‘\small’ 9 10 10.95 ‘\normalsize’ (default) 10 10.95 12 ‘\large’ 12 12 14.4 ‘\Large’ 14.4 14.4 17.28 ‘\LARGE’ 17.28 17.28 20.74 ‘\huge’ 20.74 20.74 24.88 ‘\Huge’ 24.88 24.88 24.88 The commands are listed here in declaration (not environment) form, since that is how they are typically used. For example. \begin{quotation} \small The Tao that can be named is not the eternal Tao. \end{quotation} Here, the scope of the ‘\small’ lasts until the end of the ‘quotation’ environment. It would also end at the next type style command or the end of the current group, so you could enclose it in curly braces ‘{\small This text is typeset in the small font.}’. Trying to use these commands in math, as with ‘$\small mv^2/2$’, results in ‘LaTeX Font Warning: Command \small invalid in math mode’, and the font size doesn’t change. To work with a too-large formula, often the best option is to use the ‘displaymath’ environment (*note Math formulas::), or one of the environments from the ‘amsmath’ package. For inline mathematics, such as in a table of formulas, an alternative is something like ‘{\small $mv^2/2$}’. (Sometimes ‘\scriptsize’ and ‘\scriptstyle’ are confused. Both change the font size, but the latter also changes a number of other aspects of how mathematics is typeset. *Note Math styles::.) An “environment form” of each of these commands is also defined; for instance, ‘\begin{tiny}...\end{tiny}’. However, in practice this form can easily lead to unwanted spaces at the beginning and/or end of the environment without careful consideration, so it’s generally less error-prone to stick to the declaration form. (Aside: Technically, due to the way LaTeX defines ‘\begin’ and ‘\end’, nearly every command that does not take an argument technically has an environment form. But in almost all cases, it would only cause confusion to use it. The reason for mentioning the environment form of the font size declarations specifically is that this particular use is not rare.) 4.4 Low-level font commands =========================== These commands are primarily intended for writers of macros and packages. The commands listed here are only a subset of the available ones. ‘\fontencoding{ENCODING}’ Select the font encoding, the encoding of the output font. There are a large number of valid encodings. The most common are ‘OT1’, Knuth’s original encoding for Computer Modern (the default), and ‘T1’, also known as the Cork encoding, which has support for the accented characters used by the most widespread European languages (German, French, Italian, Polish and others), which allows TeX to hyphenate words containing accented letters. For more, see . ‘\fontfamily{FAMILY}’ Select the font family. The web page provides one way to browse through many of the fonts easily used with LaTeX. Here are examples of some common families. ‘pag’ Avant Garde ‘fvs’ Bitstream Vera Sans ‘pbk’ Bookman ‘bch’ Charter ‘ccr’ Computer Concrete ‘cmr’ Computer Modern ‘cmss’ Computer Modern Sans Serif ‘cmtt’ Computer Modern Typewriter ‘pcr’ Courier ‘phv’ Helvetica ‘fi4’ Inconsolata ‘lmr’ Latin Modern ‘lmss’ Latin Modern Sans ‘lmtt’ Latin Modern Typewriter ‘pnc’ New Century Schoolbook ‘ppl’ Palatino ‘ptm’ Times ‘uncl’ Uncial ‘put’ Utopia ‘pzc’ Zapf Chancery ‘\fontseries{SERIES}’ Select the font series. A “series” combines a “weight” and a “width”. Typically, a font supports only a few of the possible combinations. Some common combined series values include: ‘m’ Medium (normal) ‘b’ Bold ‘c’ Condensed ‘bc’ Bold condensed ‘bx’ Bold extended The possible values for weight, individually, are: ‘ul’ Ultra light ‘el’ Extra light ‘l’ Light ‘sl’ Semi light ‘m’ Medium (normal) ‘sb’ Semi bold ‘b’ Bold ‘eb’ Extra bold ‘ub’ Ultra bold The possible values for width, individually, are (the meaning and relationship of these terms varies with individual typefaces): ‘uc’ Ultra condensed ‘ec’ Extra condensed ‘c’ Condensed ‘sc’ Semi condensed ‘m’ Medium ‘sx’ Semi expanded ‘x’ Expanded ‘ex’ Extra expanded ‘ux’ Ultra expanded When forming the SERIES string from the weight and width, drop the ‘m’ that stands for medium weight or medium width, unless both weight and width are ‘m’, in which case use just one (‘‘m’’). ‘\fontshape{SHAPE}’ Select font shape. Valid shapes are: ‘n’ Upright (normal) ‘it’ Italic ‘sl’ Slanted (oblique) ‘sc’ Small caps ‘ui’ Upright italics ‘ol’ Outline The two last shapes are not available for most font families, and small caps are often missing as well. ‘\fontsize{SIZE}{SKIP}’ Set the font size and the line spacing. The unit of both parameters defaults to points (‘pt’). The line spacing is the nominal vertical space between lines, baseline to baseline. It is stored in the parameter ‘\baselineskip’. The default ‘\baselineskip’ for the Computer Modern typeface is 1.2 times the ‘\fontsize’. Changing ‘\baselineskip’ directly is inadvisable since its value is reset every time a size change happens; instead use ‘\baselinestretch’. (*note \baselineskip & \baselinestretch::). ‘\linespread{FACTOR}’ Equivalent to ‘\renewcommand{\baselinestretch}{FACTOR}’, and therefore must be followed by ‘\selectfont’ to have any effect. Best specified in the preamble. *Note \baselineskip & \baselinestretch::, for using ‘setspace’ package instead. ‘\selectfont’ The effects of the font commands described above do not happen until ‘\selectfont’ is called, as in ‘\fontfamily{FAMILYNAME}\selectfont’. It is often useful to put this in a macro: ‘\newcommand*{\myfont}{\fontfamily{FAMILYNAME}\selectfont}’ (*note \newcommand & \renewcommand::). ‘\usefont{ENC}{FAMILY}{SERIES}{SHAPE}’ The same as invoking ‘\fontencoding’, ‘\fontfamily’, ‘\fontseries’ and ‘\fontshape’ with the given parameters, followed by ‘\selectfont’. For example: \usefont{ot1}{cmr}{m}{n} 5 Layout ******** Commands for controlling the general page layout. 5.1 ‘\onecolumn’ ================ Synopsis: \onecolumn Start a new page and produce single-column output. If the document is given the class option ‘onecolumn’ then this is the default behavior (*note Document class options::). This command is fragile (*note \protect::). 5.2 ‘\twocolumn’ ================ Synopses: \twocolumn \twocolumn[PRELIM ONE COLUMN TEXT] Start a new page and produce two-column output. If the document is given the class option ‘twocolumn’ then this is the default (*note Document class options::). This command is fragile (*note \protect::). If the optional PRELIM ONE COLUMN TEXT argument is present, it is typeset in one-column mode before the two-column typesetting starts. These parameters control typesetting in two-column output: ‘\columnsep’ The distance between columns. The default is 35pt. Change it with a command such as ‘\setlength{\columnsep}{40pt}’. You must change it before the two column mode starts; in the preamble is a good place. ‘\columnseprule’ The width of the rule between columns. The default is 0pt, meaning that there is no rule. Otherwise, the rule appears halfway between the two columns. Change it with a command such as ‘\setlength{\columnseprule}{0.4pt}’, before the two-column mode starts. ‘\columnwidth’ The width of a single column. In one-column mode this is equal to ‘\textwidth’. In two-column mode by default LaTeX sets the width of each of the two columns, ‘\columnwidth’, to be half of ‘\textwidth’ minus ‘\columnsep’. In a two-column document, the starred environments ‘table*’ and ‘figure*’ are two columns wide, whereas the unstarred environments ‘table’ and ‘figure’ take up only one column (*note figure:: and *note table::). LaTeX places starred floats at the top of a page. The following parameters control float behavior of two-column output. ‘\dbltopfraction’ The maximum fraction at the top of a two-column page that may be occupied by two-column wide floats. The default is 0.7, meaning that the height of a ‘table*’ or ‘figure*’ environment must not exceed ‘0.7\textheight’. If the height of your starred float environment exceeds this then you can take one of the following actions to prevent it from floating all the way to the back of the document: • Use the ‘[tp]’ location specifier to tell LaTeX to try to put the bulky float on a page by itself, as well as at the top of a page. • Use the ‘[t!]’ location specifier to override the effect of ‘\dbltopfraction’ for this particular float. • Increase the value of ‘\dbltopfraction’ to a suitably large number, to avoid going to float pages so soon. You can redefine it, as with ‘\renewcommand{\dbltopfraction}{0.9}’. ‘\dblfloatpagefraction’ For a float page of two-column wide floats, this is the minimum fraction that must be occupied by floats, limiting the amount of blank space. LaTeX’s default is ‘0.5’. Change it with ‘\renewcommand’. ‘\dblfloatsep’ On a float page of two-column wide floats, this length is the distance between floats, at both the top and bottom of the page. The default is ‘12pt plus2pt minus2pt’ for a document set at ‘10pt’ or ‘11pt’, and ‘14pt plus2pt minus4pt’ for a document set at ‘12pt’. ‘\dbltextfloatsep’ This length is the distance between a multi-column float at the top or bottom of a page and the main text. The default is ‘20pt plus2pt minus4pt’. ‘\dbltopnumber’ On a float page of two-column wide floats, this counter gives the maximum number of floats allowed at the top of the page. The LaTeX default is ‘2’. This example uses ‘\twocolumn’’s optional argument of to create a title that spans the two-column article: \documentclass[twocolumn]{article} \newcommand{\authormark}[1]{\textsuperscript{#1}} \begin{document} \twocolumn[{% inside this optional argument goes one-column text \centering \LARGE The Title \\[1.5em] \large Author One\authormark{1}, Author Two\authormark{2}, Author Three\authormark{1} \\[1em] \normalsize \begin{tabular}{p{.2\textwidth}@{\hspace{2em}}p{.2\textwidth}} \authormark{1}Department one &\authormark{2}Department two \\ School one &School two \end{tabular}\\[3em] % space below title part }] Two column text here. 5.3 ‘\flushbottom’ ================== Make all pages in the document after this declaration have the same height, by stretching the vertical space where necessary to fill out the page. This is most often used when making two-sided documents since the differences in facing pages can be glaring. If TeX cannot satisfactorily stretch the vertical space in a page then you get a message like ‘Underfull \vbox (badness 10000) has occurred while \output is active’. If you get that, one option is to change to ‘\raggedbottom’ (*note \raggedbottom::). Alternatively, you can adjust the ‘textheight’ to make compatible pages, or you can add some vertical stretch glue between lines or between paragraphs, as in ‘\setlength{\parskip}{0ex plus0.1ex}’. Your last option is to, in a final editing stage, adjust the height of individual pages (*note \enlargethispage::). The ‘\flushbottom’ state is the default only if you select the ‘twocolumn’ document class option (*note Document class options::), and for indexes made using ‘makeidx’. 5.4 ‘\raggedbottom’ =================== Make all later pages the natural height of the material on that page; no rubber vertical lengths will be stretched. Thus, in a two-sided document the facing pages may be different heights. This command can go at any point in the document body. *Note \flushbottom::. This is the default unless you select the ‘twocolumn’ document class option (*note Document class options::). 5.5 Page layout parameters ========================== ‘\columnsep’ ‘\columnseprule’ ‘\columnwidth’ The distance between the two columns, the width of a rule between the columns, and the width of the columns, when the document class option ‘twocolumn’ is in effect (*note Document class options::). *Note \twocolumn::. ‘\headheight’ Height of the box that contains the running head. The default in the ‘article’, ‘report’, and ‘book’ classes is ‘12pt’, at all type sizes. ‘\headsep’ Vertical distance between the bottom of the header line and the top of the main text. The default in the ‘article’ and ‘report’ classes is ‘25pt’. In the ‘book’ class the default is: if the document is set at 10pt then it is ‘0.25in’, and at 11pt or 12pt it is ‘0.275in’. ‘\footskip’ Distance from the baseline of the last line of text to the baseline of the page footer. The default in the ‘article’ and ‘report’ classes is ‘30pt’. In the ‘book’ class the default is: when the type size is 10pt the default is ‘0.35in’, while at 11pt it is ‘0.38in’, and at 12pt it is ‘30pt’. ‘\linewidth’ Width of the current line, decreased for each nested ‘list’ (*note list::). That is, the nominal value for ‘\linewidth’ is to equal ‘\textwidth’ but for each nested list the ‘\linewidth’ is decreased by the sum of that list’s ‘\leftmargin’ and ‘\rightmargin’ (*note itemize::). ‘\marginparpush’ ‘\marginsep’ ‘\marginparwidth’ The minimum vertical space between two marginal notes, the horizontal space between the text body and the marginal notes, and the horizontal width of the notes. Normally marginal notes appear on the outside of the page, but the declaration ‘\reversemarginpar’ changes that (and ‘\normalmarginpar’ changes it back). The defaults for ‘\marginparpush’ in both ‘book’ and ‘article’ classes are: ‘7pt’ if the document is set at 12pt, and ‘5pt’ if the document is set at 11pt or 10pt. For ‘\marginsep’, in ‘article’ class the default is ‘10pt’ except if the document is set at 10pt and in two-column mode where the default is ‘11pt’. For ‘\marginsep’ in ‘book’ class the default is ‘10pt’ in two-column mode and ‘7pt’ in one-column mode. For ‘\marginparwidth’ in both ‘book’ and ‘article’ classes, in two-column mode the default is 60% of ‘\paperwidth − \textwidth’, while in one-column mode it is 50% of that distance. ‘\oddsidemargin’ ‘\evensidemargin’ The ‘\oddsidemargin’ length is the extra distance between the left side of the page and the text’s left margin, on odd-numbered pages when the document class option ‘twoside’ is chosen and on all pages when ‘oneside’ is in effect. When ‘twoside’ is in effect, on even-numbered pages the extra distance on the left is ‘\evensidemargin’. LaTeX’s default is that ‘\oddsidemargin’ is 40% of the difference between ‘\paperwidth’ and ‘\textwidth’, and ‘\evensidemargin’ is the remainder. ‘\paperheight’ The height of the paper, as distinct from the height of the print area. Normally set with a document class option, as in ‘\documentclass[a4paper]{article}’ (*note Document class options::). ‘\paperwidth’ The width of the paper, as distinct from the width of the print area. Normally set with a document class option, as in ‘\documentclass[a4paper]{article}’ (*note Document class options::). ‘\textheight’ The normal vertical height of the page body. If the document is set at a nominal type size of 10pt then for an ‘article’ or ‘report’ the default is ‘43\baselineskip’, while for a ‘book’ it is ‘41\baselineskip’. At a type size of 11pt the default is ‘38\baselineskip’ for all document classes. At 12pt it is ‘36\baselineskip’ for all classes. ‘\textwidth’ The full horizontal width of the entire page body. For an ‘article’ or ‘report’ document, the default is ‘345pt’ when the chosen type size is 10pt, the default is ‘360pt’ at 11pt, and it is ‘390pt’ at 12pt. For a ‘book’ document, the default is ‘4.5in’ at a type size of 10pt, and ‘5in’ at 11pt or 12pt. In multi-column output, ‘\textwidth’ remains the width of the entire page body, while ‘\columnwidth’ is the width of one column (*note \twocolumn::). In lists (*note list::), ‘\textwidth’ remains the width of the entire page body (and ‘\columnwidth’ the width of the entire column), while ‘\linewidth’ may decrease for nested lists. Inside a minipage (*note minipage::) or ‘\parbox’ (*note \parbox::), all the width-related parameters are set to the specified width, and revert to their normal values at the end of the ‘minipage’ or ‘\parbox’. ‘\hsize’ This entry is included for completeness: ‘\hsize’ is the TeX primitive parameter used when text is broken into lines. It should not be used in normal LaTeX documents. ‘\topmargin’ Space between the top of the TeX page (one inch from the top of the paper, by default) and the top of the header. The value is computed based on many other parameters: ‘\paperheight − 2in − \headheight − \headsep − \textheight − \footskip’, and then divided by two. ‘\topskip’ Minimum distance between the top of the page body and the baseline of the first line of text. For the standard classes, the default is the same as the font size, e.g., ‘10pt’ at a type size of 10pt. 5.6 ‘\baselineskip’ & ‘\baselinestretch’ ======================================== The ‘\baselineskip’ is a rubber length (*note Lengths::). It gives the “leading”, the normal distance between lines in a paragraph, from baseline to baseline. Ordinarily document authors do not directly change ‘\baselineskip’ while writing. Instead, it is set by the low level font selection command ‘\fontsize’ (*note low level font commands fontsize::). The ‘\baselineskip’’s value is reset every time a font change happens and so any direct change to ‘\baselineskip’ would vanish the next time there was a font switch. For how to influence line spacing, see the discussion of ‘\baselinestretch’ below. Usually, a font’s size and baseline skip is assigned by the font designer. These numbers are nominal in the sense that if, for instance, a font’s style file has the command ‘\fontsize{10pt}{12pt}’ then that does not mean that the characters in the font are 10pt tall; for instance, parentheses and accented capitals may be taller. Nor does it mean that if the lines are spaced less than 12pt apart then they risk touching. Rather these numbers are typographic judgements. (Often, the ‘\baselineskip’ is about twenty percent larger than the font size.) The ‘\baselineskip’ is not a property of each line but of the entire paragraph. As a result, large text in the middle of a paragraph, such as a single ‘{\Huge Q}’, will be squashed into its line. TeX will make sure it doesn’t scrape up against the line above but won’t change the ‘\baselineskip’ for that one line to make extra room above. For the fix, use a ‘\strut’ (*note \strut::). The value of ‘\baselineskip’ that TeX uses for the paragraph is the value in effect at the blank line or command that ends the paragraph unit. So if a document contains this paragraph then its lines will be scrunched together, compared to lines in surrounding paragraphs. Many people see a page break between text and a displayed equation as bad style, so in effect the display is part of the paragraph. Because this display is in footnotesize, the entire paragraph has the baseline spacing matching that size. {\footnotesize $$a+b = c$$} The process for making paragraphs is that when a new line is added, if the depth of the previous line plus the height of the new line is less than ‘\baselineskip’ then TeX inserts vertical glue to make up the difference. There are two fine points. The first is that if the lines would be too close together, closer than ‘\lineskiplimit’, then TeX instead uses ‘\lineskip’ as the interline glue. The second is that TeX doesn’t actually use the depth of the previous line. Instead it uses ‘\prevdepth’, which usually contains that depth. But at the beginning of the paragraph (or any vertical list) or just after a rule, ‘\prevdepth’ has the value -1000pt and this special value tells TeX not to insert any interline glue at the paragraph start. In the standard classes ‘\lineskiplimit’ is 0pt and ‘\lineskip’ is 1pt. By the prior paragraph then, the distance between lines can approach zero but if it becomes zero (or less than zero) then the lines jump to 1pt apart. Sometimes authors must, for editing purposes, put the document in double space or one-and-a-half space. The right way to influence the interline distance is via ‘\baselinestretch’. It scales ‘\baselineskip’, and has a default value of 1.0. It is a command, not a length, and does not take effect until a font change happens, so set the scale factor like this: ‘\renewcommand{\baselinestretch}{1.5}\selectfont’. The most straightforward way to change the line spacing for an entire document is to put ‘\linespread{FACTOR}’ in the preamble. For double spacing, take FACTOR to be 1.6 and for one-and-a-half spacing use 1.3. These numbers are rough: for instance, since the ‘\baselineskip’ is about 1.2 times the font size, multiplying by 1.6 gives a baseline skip to font size ratio of about 2. (The ‘\linespread’ command is defined as ‘\renewcommand{\baselinestretch}{FACTOR}’ so it also won’t take effect until a font setting happens. But that always takes place at the start of a document, so there you don’t need to follow it with ‘\selectfont’.) A simpler approach is the ‘setspace’ package. The basic example: \usepackage{setspace} \doublespacing % or \onehalfspacing for 1.5 In the preamble these will start the document off with that sizing. But you can also use these declarations in the document body to change the spacing from that point forward, and consequently there is ‘\singlespacing’ to return the spacing to normal. In the document body, a better practice than using the declarations is to use environments, such as ‘\begin{doublespace} ... \end{doublespace}’. The package also has commands to do arbitrary spacing: ‘\setstretch{FACTOR}’ and ‘\begin{spacing}{FACTOR} ... \end{spacing}’. This package also keeps the line spacing single-spaced in places where that is typically desirable, such as footnotes and figure captions. See the package documentation. 5.7 Floats ========== Some typographic elements, such as figures and tables, cannot be broken across pages. They must be typeset outside of the normal flow of text, for instance floating to the top of a later page. LaTeX can have a number of different classes of floating material. The default is the two classes, ‘figure’ (*note figure::) and ‘table’ (*note table::), but you can create a new class with the package ‘float’. Within any one float class LaTeX always respects the order, so that the first figure in a document source must be typeset before the second figure. However, LaTeX may mix the classes, so it can happen that while the first table appears in the source before the first figure, it appears in the output after it. The placement of floats is subject to parameters, given below, that limit the number of floats that can appear at the top of a page, and the bottom, etc. If so many floats are queued that the limits prevent them all from fitting on a page then LaTeX places what it can and defers the rest to the next page. In this way, floats may end up being typeset far from their place in the source. In particular, a float that is big may migrate to the end of the document. In which event, because all floats in a class must appear in sequential order, every following float in that class also appears at the end. In addition to changing the parameters, for each float you can tweak where the float placement algorithm tries to place it by using its PLACEMENT argument. The possible values are a sequence of the letters below. The default for both ‘figure’ and ‘table’, in both ‘article’ and ‘book’ classes, is ‘tbp’. ‘t’ (Top)—at the top of a text page. ‘b’ (Bottom)—at the bottom of a text page. (However, ‘b’ is not allowed for full-width floats (‘figure*’) with double-column output. To ameliorate this, use the ‘stfloats’ or ‘dblfloatfix’ package, but see the discussion at caveats in the FAQ: . ‘h’ (Here)—at the position in the text where the ‘figure’ environment appears. However, ‘h’ is not allowed by itself; ‘t’ is automatically added. To absolutely force a float to appear “here”, you can ‘\usepackage{float}’ and use the ‘H’ specifier which it defines. For further discussion, see the FAQ entry at . ‘p’ (Page of floats)—on a separate “float page”, which is a page containing no text, only floats. ‘!’ Used in addition to one of the above; for this float only, LaTeX ignores the restrictions on both the number of floats that can appear and the relative amounts of float and non-float text on the page. The ‘!’ specifier does _not_ mean “put the float here”; see above. Note: the order in which letters appear in the PLACEMENT argument does not change the order in which LaTeX tries to place the float; for instance, ‘btp’ has the same effect as ‘tbp’. All that PLACEMENT does is that if a letter is not present then the algorithm does not try that location. Thus, LaTeX’s default of ‘tbp’ is to try every location except placing the float where it occurs in the source. To prevent LaTeX from moving floats to the end of the document or a chapter you can use a ‘\clearpage’ command to start a new page and insert all pending floats. If a pagebreak is undesirable then you can use the ‘afterpage’ package and issue ‘\afterpage{\clearpage}’. This will wait until the current page is finished and then flush all outstanding floats. LaTeX can typeset a float before where it appears in the source (although on the same output page) if there is a ‘t’ specifier in the PLACEMENT parameter. If this is not desired, and deleting the ‘t’ is not acceptable as it keeps the float from being placed at the top of the next page, then you can prevent it by either using the ‘flafter’ package or using the command ‘\suppressfloats[t]’, which causes floats for the top position on this page to moved to the next page. Parameters relating to fractions of pages occupied by float and non-float text (change them with ‘\renewcommand{PARAMETER}{DECIMAL BETWEEN 0 AND 1}’): ‘\bottomfraction’ The maximum fraction of the page allowed to be occupied by floats at the bottom; default ‘.3’. ‘\floatpagefraction’ The minimum fraction of a float page that must be occupied by floats; default ‘.5’. ‘\textfraction’ Minimum fraction of a page that must be text; if floats take up too much space to preserve this much text, floats will be moved to a different page. The default is ‘.2’. ‘\topfraction’ Maximum fraction at the top of a page that may be occupied before floats; default ‘.7’. Parameters relating to vertical space around floats (change them with a command of the form ‘\setlength{PARAMETER}{LENGTH EXPRESSION}’): ‘\floatsep’ Space between floats at the top or bottom of a page; default ‘12pt plus2pt minus2pt’. ‘\intextsep’ Space above and below a float in the middle of the main text; default ‘12pt plus2pt minus2pt’ for 10 point and 11 point documents, and ‘14pt plus4pt minus4pt’ for 12 point documents. ‘\textfloatsep’ Space between the last (first) float at the top (bottom) of a page; default ‘20pt plus2pt minus4pt’. Counters relating to the number of floats on a page (change them with a command of the form ‘\setcounter{CTRNAME}{NATURAL NUMBER}’): ‘bottomnumber’ Maximum number of floats that can appear at the bottom of a text page; default 1. ‘dbltopnumber’ Maximum number of full-sized floats that can appear at the top of a two-column page; default 2. ‘topnumber’ Maximum number of floats that can appear at the top of a text page; default 2. ‘totalnumber’ Maximum number of floats that can appear on a text page; default 3. The principal TeX FAQ entry relating to floats contains suggestions for relaxing LaTeX’s default parameters to reduce the problem of floats being pushed to the end. A full explanation of the float placement algorithm is in Frank Mittelbach’s article “How to influence the position of float environments like figure and table in LaTeX?” (). 5.7.1 ‘\caption’ ---------------- Synopsis: \caption{CAPTION-TEXT} or \caption[SHORT-CAPTION-TEXT]{CAPTION-TEXT} Make a caption for a floating environment, such as a ‘figure’ or ‘table’ environment (*note figure:: or *note table::). In this example, LaTeX places a caption below the vertical blank space that is left by the author for the later inclusion of a picture. \begin{figure} \vspace*{1cm} \caption{Alonzo Cushing, Battery A, 4th US Artillery.} \label{fig:CushingPic} \end{figure} The ‘\caption’ command will label the CAPTION-TEXT with something like ‘Figure 1:’ for an article or ‘Figure 1.1:’ for a book. The text is centered if it is shorter than the text width, or set as an unindented paragraph if it takes more than one line. In addition to placing the CAPTION-TEXT in the output, the ‘\caption’ command also saves that information for use in a list of figures or list of tables (*note Table of contents etc.::). Here the ‘\caption’ command uses the optional SHORT-CAPTION-TEXT, so that the shorter text appears in the list of tables, rather than the longer CAPTION-TEXT. \begin{table} \centering \begin{tabular}{|*{3}{c}|} \hline 4 &9 &2 \\ 3 &5 &7 \\ 8 &1 &6 \\ \hline \end{tabular} \caption[\textit{Lo Shu} magic square]{% The \textit{Lo Shu} magic square, which is unique among squares of order three up to rotation and reflection.} \label{tab:LoShu} \end{table} LaTeX will label the CAPTION-TEXT with something like ‘Table 1:’ for an article or ‘Table 1.1:’ for a book. The caption can appear at the top of the ‘figure’ or ‘table’. For instance, that would happen in the prior example by putting the ‘\caption’ between the ‘\centering’ and the ‘\begin{tabular}’. Different floating environments are numbered separately, by default. It is ‘\caption’ that updates the counter, and so any ‘\label’ must come after the ‘\caption’. The counter for the ‘figure’ environment is named ‘figure’, and similarly the counter for the ‘table’ environment is ‘table’. The text that will be put in the list of figures or list of tables is moving argument. If you get the LaTeX error ‘! Argument of \@caption has an extra }’ then you must put ‘\protect’ in front of any fragile commands. *Note \protect::. The ‘caption’ package has many options to adjust how the caption appears, for example changing the font size, making the caption be hanging text rather than set as a paragraph, or making the caption always set as a paragraph rather than centered when it is short. 6 Sectioning ************ Structure your text into divisions: parts, chapters, sections, etc. All sectioning commands have the same form, one of: SECTIONING-COMMAND{TITLE} SECTIONING-COMMAND*{TITLE} SECTIONING-COMMAND[TOC-TITLE]{TITLE} For instance, declare the start of a subsection as with ‘\subsection{Motivation}’. The table has each SECTIONING-COMMAND in LaTeX. All are available in all of LaTeX’s standard document classes ‘book’, ‘report’, and ‘article’, except that ‘\chapter’ is not available in ‘article’. Sectioning unit Command Level -------------------------------------------------------------------- Part ‘\part’ -1 (‘book’, ‘report’), 0 (‘article’) Chapter ‘\chapter’ 0 Section ‘\section’ 1 Subsection ‘\subsection’ 2 Subsubsection ‘\subsubsection’ 3 Paragraph ‘\paragraph’ 4 Subparagraph ‘\subparagraph’ 5 All these commands have a ‘*’-form that prints TITLE as usual but does not number it and does not make an entry in the table of contents. An example of using this is for an appendix in an ‘article’. The input ‘\appendix\section{Appendix}’ gives the output ‘A Appendix’ (*note \appendix::). You can lose the numbering ‘A’ by instead entering ‘\section*{Appendix}’ (articles often omit a table of contents and have simple page headers so the other differences from the ‘\section’ command may not matter). The section title TITLE provides the heading in the main text, but it may also appear in the table of contents and in the running head or foot (*note Page styles::). You may not want the same text in these places as in the main text. All of these commands have an optional argument TOC-TITLE for these other places. The level number in the table above determines which sectional units are numbered, and which appear in the table of contents. If the sectioning command’s LEVEL is less than or equal to the value of the counter ‘secnumdepth’ then the titles for this sectioning command will be numbered (*note Sectioning/secnumdepth::). And, if LEVEL is less than or equal to the value of the counter ‘tocdepth’ then the table of contents will have an entry for this sectioning unit (*note Sectioning/tocdepth::). LaTeX expects that before you have a ‘\subsection’ you will have a ‘\section’ and, in a ‘book’ class document, that before a ‘\section’ you will have a ‘\chapter’. Otherwise you can get something like a subsection numbered ‘3.0.1’. LaTeX lets you change the appearance of the sectional units. As a simple example, you can change the section numbering to uppercase letters with this (in the preamble): ‘\renewcommand\thesection{\Alph{section}}’ . (*Note \alph \Alph \arabic \roman \Roman \fnsymbol::.) CTAN has many packages that make this adjustment easier, notably ‘titlesec’. Two counters relate to the appearance of headings made by sectioning commands. ‘secnumdepth’ Controls which sectioning unit are numbered. Setting the counter with ‘\setcounter{secnumdepth}{LEVEL}’ will suppress numbering of sectioning at any depth greater than LEVEL (*note \setcounter::). See the above table for the level numbers. For instance, if the ‘secnumdepth’ is 1 in an ‘article’ then a ‘\section{Introduction}’ command will produce output like ‘1 Introduction’ while ‘\subsection{Discussion}’ will produce output like ‘Discussion’, without the number. LaTeX’s default ‘secnumdepth’ is 3 in ‘article’ class and 2 in the ‘book’ and ‘report’ classes. ‘tocdepth’ Controls which sectioning units are listed in the table of contents. The setting ‘\setcounter{tocdepth}{LEVEL}’ makes the sectioning units at LEVEL be the smallest ones listed (*note \setcounter::). See the above table for the level numbers. For instance, if ‘tocdepth’ is 1 then the table of contents will list sections but not subsections. LaTeX’s default ‘tocdepth’ is 3 in ‘article’ class and 2 in the ‘book’ and ‘report’ classes. 6.1 ‘\part’ =========== Synopsis, one of: \part{TITLE} \part*{TITLE} \part[TOC-TITLE]{TITLE} Start a document part. The standard LaTeX classes ‘book’, ‘report’, and ‘article’, all have this command. This produces a document part, in a book. \part{VOLUME I \\ PERSONAL MEMOIRS OF U.\ S.\ GRANT} \chapter{ANCESTRY--BIRTH--BOYHOOD.} My family is American, and has been for generations, in all its branches, direct and collateral. In each standard class the ‘\part’ command outputs a part number such as ‘Part I’, alone on its line, in boldface, and in large type. Then LaTeX outputs TITLE, also alone on its line, in bold and in even larger type. In class ‘book’, the LaTeX default puts each part alone on its own page. If the book is two-sided then LaTeX will skip a page if needed to have the new part on an odd-numbered page. In ‘report’ it is again alone on a page, but LaTeX won’t force it onto an odd-numbered page. In an ‘article’ LaTeX does not put it on a fresh page, but instead outputs the part number and part title onto the main document page. The ‘*’ form shows TITLE but it does not show the part number, does not increment the ‘part’ counter, and produces no table of contents entry. The optional argument TOC-TITLE will appear as the part title in the table of contents (*note Table of contents etc.::) and in running headers (*note Page styles::). If it is not present then TITLE will be there. This example puts a line break in TITLE but omits the break in the table of contents. \part[Up from the bottom; my life]{Up from the bottom\\ my life} For determining which sectional units are numbered and which appear in the table of contents, the level number of a part is -1 (*note Sectioning/secnumdepth::, and *note Sectioning/tocdepth::). In the class ‘article’, if a paragraph immediately follows the part title then it is not indented. To get an indent you can use the package ‘indentfirst’. One package to change the behavior of ‘\part’ is ‘titlesec’. See its documentation on CTAN. 6.2 ‘\chapter’ ============== Synopsis, one of: \chapter{TITLE} \chapter*{TITLE} \chapter[TOC-TITLE]{TITLE} Start a chapter. The standard LaTeX classes ‘book’ and ‘report’ have this command but ‘article’ does not. This produces a chapter. \chapter{Loomings} Call me Ishmael. Some years ago---never mind how long precisely---having little or no money in my purse, and nothing particular to interest me on shore, I thought I would sail about a little and see the watery part of the world. The LaTeX default starts each chapter on a fresh page, an odd-numbered page if the document is two-sided. It produces a chapter number such as ‘Chapter 1’ in large boldface type (the size is ‘\huge’). It then puts TITLE on a fresh line, in boldface type that is still larger (size ‘\Huge’). It also increments the ‘chapter’ counter, adds an entry to the table of contents (*note Table of contents etc.::), and sets the running header information (*note Page styles::). The ‘*’ form shows TITLE on a fresh line, in boldface. But it does not show the chapter number, does not increment the ‘chapter’ counter, produces no table of contents entry, and does not affect the running header. (If you use the page style ‘headings’ in a two-sided document then the header will be from the prior chapter.) This example illustrates. \chapter*{Preamble} The optional argument TOC-TITLE will appear as the chapter title in the table of contents (*note Table of contents etc.::) and in running headers (*note Page styles::). If it is not present then TITLE will be there. This shows the full name in the chapter title, \chapter[Weyl]{Hermann Klaus Hugo (Peter) Weyl (1885--1955)} but only ‘Weyl’ on the contents page. This puts a line break in the title but that doesn’t work well with running headers so it omits the break in the contents \chapter[Given it all; my story]{Given it all\\ my story} For determining which sectional units are numbered and which appear in the table of contents, the level number of a chapter is 0 (*note Sectioning/secnumdepth:: and *note Sectioning/tocdepth::). The paragraph that follows the chapter title is not indented, as is a standard typographical practice. To get an indent use the package ‘indentfirst’. You can change what is shown for the chapter number. To change it to something like ‘Lecture 1’, put in the preamble either ‘\renewcommand{\chaptername}{Lecture}’ or this (*note \makeatletter & \makeatother::). \makeatletter \renewcommand{\@chapapp}{Lecture} \makeatother To make this change because of the primary language for the document, see the package ‘babel’. In a two-sided document LaTeX puts a chapter on odd-numbered page, if necessary leaving an even-numbered page that is blank except for any running headers. To make that page completely blank, see *note \clearpage & \cleardoublepage::. To change the behavior of the ‘\chapter’ command, you can copy its definition from the LaTeX format file and make adjustments. But there are also many packages on CTAN that address this. One is ‘titlesec’. See its documentation, but the example below gives a sense of what it can do. \usepackage{titlesec} % in preamble \titleformat{\chapter} {\Huge\bfseries} % format of title {} % label, such as 1.2 for a subsection {0pt} % length of separation between label and title {} % before-code hook This omits the chapter number ‘Chapter 1’ from the page but unlike ‘\chapter*’ it keeps the chapter in the table of contents and the running headers. 6.3 ‘\section’ ============== Synopsis, one of: \section{TITLE} \section*{TITLE} \section[TOC-TITLE]{TITLE} Start a section. The standard LaTeX classes ‘article’, ‘book’, and ‘report’ all have this command. This produces a section. In this Part we tend to be more interested in the function, in the input-output behavior, than in the details of implementing that behavior. \section{Turing machines} Despite this desire to downplay implementation, we follow the approach of A~Turing that the first step toward defining the set of computable functions is to reflect on the details of what mechanisms can do. For the standard LaTeX classes ‘book’ and ‘report’ the default output is like ‘1.2 TITLE’ (for chapter 1, section 2), alone on its line and flush left, in boldface and a larger type (the type size is ‘\Large’). The same holds in ‘article’ except that there are no chapters in that class so it looks like ‘2 TITLE’. The ‘*’ form shows TITLE. But it does not show the section number, does not increment the ‘section’ counter, produces no table of contents entry, and does not affect the running header. (If you use the page style ‘headings’ in a two-sided document then the header will be from the prior section.) The optional argument TOC-TITLE will appear as the section title in the table of contents (*note Table of contents etc.::) and in running headers (*note Page styles::). If it is not present then TITLE will be there. This shows the full name in the title of the section: \section[Elizabeth~II]{Elizabeth the Second, by the Grace of God of the United Kingdom, Canada and Her other Realms and Territories Queen, Head of the Commonwealth, Defender of the Faith.} but only ‘Elizabeth II’ on the contents page and in the headers. This has a line break in TITLE but that does not work with headers so it is omitted from the contents and headers. \section[Truth is, I cheated; my life story]{Truth is, I cheated\\my life story} For determining which sectional units are numbered and which appear in the table of contents, the level number of a section is 1 (*note Sectioning/secnumdepth:: and *note Sectioning/tocdepth::). The paragraph that follows the section title is not indented, as is a standard typographical practice. One way to get an indent is to use the package ‘indentfirst’. In general, to change the behavior of the ‘\section’ command, there are a number of options. One is the ‘\@startsection’ command (*note \@startsection::). There are also many packages on CTAN that address this, including ‘titlesec’. See the documentation but the example below gives a sense of what they can do. \usepackage{titlesec} % in preamble \titleformat{\section} {\normalfont\Large\bfseries} % format of title {\makebox[1pc][r]{\thesection\hspace{1pc}}} % label {0pt} % length of separation between label and title {} % before-code hook \titlespacing*{\section} {-1pc}{18pt}{10pt}[10pc] That puts the section number in the margin. 6.4 ‘\subsection’ ================= Synopsis, one of: \subsection{TITLE} \subsection*{TITLE} \subsection[TOC-TITLE]{TITLE} Start a subsection. The standard LaTeX classes ‘article’, ‘book’, and ‘report’ all have this command. This produces a subsection. We will show that there are more functions than Turing machines and that therefore some functions have no associated machine. \subsection{Cardinality} We will begin with two paradoxes that dramatize the challenge to our intuition posed by comparing the sizes of infinite sets. For the standard LaTeX classes ‘book’ and ‘report’ the default output is like ‘1.2.3 TITLE’ (for chapter 1, section 2, subsection 3), alone on its line and flush left, in boldface and a larger type (the type size is ‘\large’). The same holds in ‘article’ except that there are no chapters in that class so it looks like ‘2.3 TITLE’. The ‘*’ form shows TITLE. But it does not show the subsection number, does not increment the ‘subsection’ counter, and produces no table of contents entry. The optional argument TOC-TITLE will appear as the subsection title in the table of contents (*note Table of contents etc.::). If it is not present then TITLE will be there. This shows the full text in the title of the subsection: \subsection[$\alpha,\beta,\gamma$ paper]{\textit{The Origin of Chemical Elements} by R.A.~Alpher, H.~Bethe, and G.~Gamow} but only ‘α,β,γ paper’ on the contents page. For determining which sectional units are numbered and which appear in the table of contents, the level number of a subsection is 2 (*note Sectioning/secnumdepth:: and *note Sectioning/tocdepth::). The paragraph that follows the subsection title is not indented, as is a standard typographical practice. One way to get an indent is to use the package ‘indentfirst’. There are a number of ways to change the behavior of the ‘\subsection’ command. One is the ‘\@startsection’ command (*note \@startsection::). There are also many packages on CTAN that address this, including ‘titlesec’. See the documentation but the example below gives a sense of what they can do. \usepackage{titlesec} % in preamble \titleformat{\subsection}[runin] {\normalfont\normalsize\bfseries} % format of the title {\thesubsection} % label {0.6em} % space between label and title {} % before-code hook That puts the subsection number and TITLE in the first line of text. 6.5 ‘\subsubsection’, ‘\paragraph’, ‘\subparagraph’ =================================================== Synopsis, one of: \subsubsection{TITLE} \subsubsection*{TITLE} \subsubsection[TOC-TITLE]{TITLE} or one of: \paragraph{TITLE} \paragraph*{TITLE} \paragraph[TOC-TITLE]{TITLE} or one of: \subparagraph{TITLE} \subparagraph*{TITLE} \subparagraph[TOC-TITLE]{TITLE} Start a subsubsection, paragraph, or subparagraph. The standard LaTeX classes ‘article’, ‘book’, and ‘report’ all have these commands, although they are not commonly used. This produces a subsubsection. \subsubsection{Piston ring compressors: structural performance} Provide exterior/interior wall cladding assemblies capable of withstanding the effects of load and stresses from consumer-grade gasoline engine piston rings. The default output of each of the three does not change over the standard LaTeX classes ‘article’, ‘book’, and ‘report’. For ‘\subsubsection’ the TITLE is alone on its line, in boldface and normal size type. For ‘\paragraph’ the TITLE is inline with the text, not indented, in boldface and normal size type. For ‘\subparagraph’ the TITLE is inline with the text, with a paragraph indent, in boldface and normal size type (Because an ‘article’ has no chapters its subsubsections are numbered and so it looks like ‘1.2.3 TITLE’, for section 1, subsection 2, and subsubsection 3. The other two divisions are not numbered.) The ‘*’ form shows TITLE. But it does not increment the associated counter and produces no table of contents entry (and does not show the number for ‘\subsubsection’). The optional argument TOC-TITLE will appear as the division title in the table of contents (*note Table of contents etc.::). If it is not present then TITLE will be there. For determining which sectional units are numbered and which appear in the table of contents, the level number of a subsubsection is 3, of a paragraph is 4, and of a subparagraph is 5 (*note Sectioning/secnumdepth:: and *note Sectioning/tocdepth::). The paragraph that follows the subsubsection title is not indented, as is a standard typographical practice. One way to get an indent is to use the package ‘indentfirst’. There are a number of ways to change the behavior of the these commands. One is the ‘\@startsection’ command (*note \@startsection::). There are also many packages on CTAN that address this, including ‘titlesec’. See the documentation on CTAN. 6.6 ‘\appendix’ =============== Synopsis: \appendix This does not directly produce any output. But in a ‘book’ or ‘report’ document it declares that subsequent ‘\chapter’ commands start an appendix. In an article it does the same, for ‘\section’ commands. It also resets the ‘chapter’ and ‘section’ counters to 0 in a book or report, and in an article resets the ‘section’ and ‘subsection’ counters. In this book \chapter{One} ... \chapter{Two} ... ... \appendix \chapter{Three} ... \chapter{Four} ... the first two will generate output numbered ‘Chapter 1’ and ‘Chapter 2’. After the ‘\appendix’ the numbering will be ‘Appendix A’ and ‘Appendix B’. *Note Larger book template::, for another example. The ‘appendix’ package adds the command ‘\appendixpage’ to put a separate ‘Appendices’ in the document body before the first appendix, and the command ‘\addappheadtotoc’ to do the same in the table of contents. You can reset the name ‘Appendices’ with a command like ‘\renewcommand{\appendixname}{Specification}’, as well as a number of other features. See the documentation on CTAN. 6.7 ‘\frontmatter’, ‘\mainmatter’, ‘\backmatter’ ================================================ Synopsis, one or more of: \frontmatter ... \mainmatter ... \backmatter ... Format a ‘book’ class document differently according to which part of the document is being produced. All three commands are optional. Traditionally, a book’s front matter contains such things as the title page, an abstract, a table of contents, a preface, a list of notations, a list of figures, and a list of tables. (Some of these front matter pages, such as the title page, are traditionally not numbered.) The back matter may contain such things as a glossary, notes, a bibliography, and an index. The ‘\frontmatter’ command makes the pages numbered in lowercase roman, and makes chapters not numbered, although each chapter’s title appears in the table of contents; if you use other sectioning commands here, use the ‘*’-version (*note Sectioning::). The ‘\mainmatter’ command changes the behavior back to the expected version, and resets the page number. The ‘\backmatter’ command leaves the page numbering alone but switches the chapters back to being not numbered. *Note Larger book template::, for an example using these three commands. 6.8 ‘\@startsection’, typesetting sectional unit headings ========================================================= Synopsis: \@startsection{NAME}{LEVEL}{INDENT}{BEFORESKIP}{AFTERSKIP}{STYLE} Used to help redefine the behavior of commands that start sectioning divisions such as ‘\section’ or ‘\subsection’. Note that the ‘titlesec’ package makes manipulation of sectioning easier. Further, while most requirements for sectioning commands can be satisfied with ‘\@startsection’, some cannot. For instance, in the standard LaTeX ‘book’ and ‘report’ classes the commands ‘\chapter’ and ‘\report’ are not constructed in this way. To make such a command you may want to use the ‘\secdef’ command. Technically, ‘\@startsection’ has the form \@startsection{NAME} {LEVEL} {INDENT} {BEFORESKIP} {AFTERSKIP} {STYLE}*[TOCTITLE]{TITLE} so that issuing \renewcommand{\section}{\@startsection{NAME} {LEVEL} {INDENT} {BEFORESKIP} {AFTERSKIP} {STYLE}} redefines ‘\section’ while keeping its standard calling form ‘\section*[TOCTITLE]{TITLE}’ (in which, for reminder, the star ‘*’ is optional). *Note Sectioning::. This implies that when you write a command like ‘\renewcommand{\section}{...}’, the ‘\@startsection{...}’ must come last in the definition. See the examples below. NAME Name of the counter used to number the sectioning header. This counter must be defined separately. Most commonly this is either ‘section’, ‘subsection’, or ‘paragraph’. Although in those cases the counter name is the same as the sectioning command itself, you don’t have to use the same name. Then ‘\the’NAME displays the title number and ‘\’NAME‘mark’ is for the page headers. See the third example below. LEVEL An integer giving the depth of the sectioning command. *Note Sectioning::, for the list of standard level numbers. If LEVEL is less than or equal to the value of the counter ‘secnumdepth’ then titles for this sectioning command will be numbered (*note Sectioning/secnumdepth::). For instance, if ‘secnumdepth’ is 1 in an ‘article’ then the command ‘\section{Introduction}’ will produce output like “1 Introduction” while ‘\subsection{Discussion}’ will produce output like “Discussion”, without the number prefix. If LEVEL is less than or equal to the value of the counter TOCDEPTH then the table of contents will have an entry for this sectioning unit (*note Sectioning/tocdepth::). For instance, in an ‘article’, if TOCDEPTH is 1 then the table of contents will list sections but not subsections. INDENT A length giving the indentation of all of the title lines with respect to the left margin. To have the title flush with the margin use ‘0pt’. A negative indentation such as ‘-\parindent’ will move the title into the left margin. BEFORESKIP The absolute value of this length is the amount of vertical space that is inserted before this sectioning unit’s title. This space will be discarded if the sectioning unit happens to start at the beginning of a page. If this number is negative then the first paragraph following the header is not indented, if it is non-negative then the first paragraph is indented. (Note that the negative of ‘1pt plus 2pt minus 3pt’ is ‘-1pt plus -2pt minus -3pt’.) For example, if BEFORESKIP is ‘-3.5ex plus -1ex minus -0.2ex’ then to start the new sectioning unit, LaTeX will add about 3.5 times the height of a letter x in vertical space, and the first paragraph in the section will not be indented. Using a rubber length, with ‘plus’ and ‘minus’, is good practice here since it gives LaTeX more flexibility in making up the page (*note Lengths::). The full accounting of the vertical space between the baseline of the line prior to this sectioning unit’s header and the baseline of the header is that it is the sum of the ‘\parskip’ of the text font, the ‘\baselineskip’ of the title font, and the absolute value of the BEFORESKIP. This space is typically rubber so it may stretch or shrink. (If the sectioning unit starts on a fresh page so that the vertical space is discarded then the baseline of the header text will be where LaTeX would put the baseline of the first text line on that page.) AFTERSKIP This is a length. If AFTERSKIP is non-negative then this is the vertical space inserted after the sectioning unit’s title header. If it is negative then the title header becomes a run-in header, so that it becomes part of the next paragraph. In this case the absolute value of the length gives the horizontal space between the end of the title and the beginning of the following paragraph. (Note that the negative of ‘1pt plus 2pt minus 3pt’ is ‘-1pt plus -2pt minus -3pt’.) As with BEFORESKIP, using a rubber length, with ‘plus’ and ‘minus’ components, is good practice here since it gives LaTeX more flexibility in putting together the page. If ‘afterskip’ is non-negative then the full accounting of the vertical space between the baseline of the sectioning unit’s header and the baseline of the first line of the following paragraph is that it is the sum of the ‘\parskip’ of the title font, the ‘\baselineskip’ of the text font, and the value of AFTER. That space is typically rubber so it may stretch or shrink. (Note that because the sign of ‘afterskip’ changes the sectioning unit header’s from standalone to run-in, you cannot use a negative ‘afterskip’ to cancel part of the ‘\parskip’.) STYLE Controls the styling of the title. See the examples below. Typical commands to use here are ‘\centering’, ‘\raggedright’, ‘\normalfont’, ‘\hrule’, or ‘\newpage’. The last command in STYLE may be one that takes one argument, such as ‘\MakeUppercase’ or ‘\fbox’ that takes one argument. The section title will be supplied as the argument to this command. For instance, setting STYLE to ‘\bfseries\MakeUppercase’ would produce titles that are bold and uppercase. These are LaTeX’s defaults for the first three sectioning units that are defined with ‘\@startsection’, for the ‘article’, ‘book’, and ‘report’ classes. • For ‘section’: LEVEL is 1, INDENT is 0pt, BEFORESKIP is ‘-3.5ex plus -1ex minus -0.2ex’, AFTERSKIP is ‘2.3ex plus 0.2ex’, and STYLE is ‘\normalfont\Large\bfseries’. • For ‘subsection’: LEVEL is 2, INDENT is 0pt, BEFORESKIP is ‘-3.25ex plus -1ex minus -0.2ex’, AFTERSKIP is ‘1.5ex plus 0.2ex’, and STYLE is ‘\normalfont\large\bfseries’. • For ‘subsubsection’: LEVEL is 3, INDENT is 0pt, BEFORESKIP is ‘-3.25ex plus -1ex minus -0.2ex’, AFTERSKIP is ‘1.5ex plus 0.2ex’, and STYLE is ‘\normalfont\normalsize\bfseries’. Some examples follow. These go either in a package or class file or in the preamble of a LaTeX document. If you put them in the preamble they must go between a ‘\makeatletter’ command and a ‘\makeatother’. (Probably the error message ‘You can't use `\spacefactor' in vertical mode.’ means that you forgot this.) *Note \makeatletter & \makeatother::. This will put section titles in large boldface type, centered. It says ‘\renewcommand’ because LaTeX’s standard classes have already defined a ‘\section’. For the same reason it does not define a ‘section’ counter, or the commands ‘\thesection’ and ‘\l@section’. \renewcommand\section{% \@startsection{section}% *note NAME: \@startsection/name. {1}% *note LEVEL: \@startsection/level. {0pt}% *note INDENT: \@startsection/indent. {-3.5ex plus -1ex minus -.2ex}% *note BEFORESKIP: \@startsection/beforeskip. {2.3ex plus.2ex}% *note AFTERSKIP: \@startsection/afterskip. {\centering\normalfont\Large\bfseries}% *note STYLE: \@startsection/style. } This will put ‘subsection’ titles in small caps type, inline with the paragraph. \renewcommand\subsection{% \@startsection{subsection}% *note NAME: \@startsection/name. {2}% *note LEVEL: \@startsection/level. {0em}% *note INDENT: \@startsection/indent. {-1ex plus 0.1ex minus -0.05ex}% *note BEFORESKIP: \@startsection/beforeskip. {-1em plus 0.2em}% *note AFTERSKIP: \@startsection/afterskip. {\scshape}% *note STYLE: \@startsection/style. } The prior examples redefined existing sectional unit title commands. This defines a new one, illustrating the needed counter and macros to display that counter. \setcounter{secnumdepth}{6}% show counters this far down \newcounter{subsubparagraph}[subparagraph]% counter for numbering \renewcommand{\thesubsubparagraph}% how to display {\thesubparagraph.\@arabic\c@subsubparagraph}% numbering \newcommand{\subsubparagraph}{\@startsection {subsubparagraph}% {6}% {0em}% {\baselineskip}% {0.5\baselineskip}% {\normalfont\normalsize}} \newcommand*\l@subsubparagraph{\@dottedtocline{6}{10em}{5em}}% for toc \newcommand{\subsubparagraphmark}[1]{}% for page headers 7 Cross references ****************** We often want something like ‘See Theorem~31’. But by-hand typing the 31 is poor practice. Instead you should write a “label” such as ‘\label{eq:GreensThm}’ and then “reference” it, as with ‘See equation~\ref{eq:GreensThm}’. LaTeX will automatically work out the number, put it into the output, and will change that number later if needed. We will see this with Theorem~\ref{th:GreensThm}. % forward reference ... \begin{theorem} \label{th:GreensThm} ... \end{theorem} ... See Theorem~\ref{th:GreensThm} on page~\pageref{th:GreensThm}. LaTeX tracks cross reference information in a file having the extension ‘.aux’ and with the same base name as the file containing the ‘\label’. So if ‘\label’ is in ‘calculus.tex’ then the information is in ‘calculus.aux’. LaTeX puts the information in that file every time it runs across a ‘\label’. The behavior described in the prior paragraph results in a quirk that happens when your document has a “forward reference”, a ‘\ref’ that appears before the associated ‘\label’. If this is the first time that you are compiling the document then you will get ‘LaTeX Warning: Label(s) may have changed. Rerun to get cross references right’ and in the output the forward reference will appear as two question marks ‘??’, in boldface. A similar thing happens if you change some things so the references changes; you get the same warning and the output contains the old reference information. In both cases, resolve this by compiling the document a second time. The ‘cleveref’ package enhances LaTeX’s cross referencing features. You can arrange that if you enter ‘\begin{thm}\label{th:Nerode}...\end{thm}’ then ‘\cref{th:Nerode}’ will output ‘Theorem 3.21’, without you having to enter the “Theorem.” 7.1 ‘\label’ ============ Synopsis: \label{KEY} Assign a reference number to KEY. In ordinary text ‘\label{KEY}’ assigns to KEY the number of the current sectional unit. Inside an environment with numbering, such as a ‘table’ or ‘theorem’ environment, ‘\label{KEY}’ assigns to KEY the number of that environment. Retrieve the assigned number with the ‘\ref{KEY}’ command (*note \ref::). A key name can consist of any sequence of letters, digits, or common punctuation characters. Upper and lowercase letters are distinguished, as usual. A common convention is to use labels consisting of a prefix and a suffix separated by a colon or period. Thus, ‘\label{fig:Post}’ is a label for a figure with a portrait of Emil Post. This helps to avoid accidentally creating two labels with the same name, and makes your source more readable. Some commonly-used prefixes: ‘ch’ for chapters ‘sec’ ‘subsec’ for lower-level sectioning commands ‘fig’ for figures ‘tab’ for tables ‘eq’ for equations In the auxiliary file the reference information is kept as the text of a command of the form ‘\newlabel{LABEL}{{CURRENTLABEL}{PAGENUMBER}}’. Here CURRENTLABEL is the current value of the macro ‘\@currentlabel’ that is usually updated whenever you call ‘\refstepcounter{COUNTER}’. Below, the key ‘sec:test’ will get the number of the current section and the key ‘fig:test’ will get the number of the figure. (Incidentally, put labels after captions in figures and tables.) \section{section name} \label{sec:test} This is Section~\ref{sec:test}. \begin{figure} ... \caption{caption text} \label{fig:test} \end{figure} See Figure~\ref{fig:test}. 7.2 ‘\pageref’ ============== Synopsis: \pageref{KEY} Produce the page number of the place in the text where the corresponding ‘\label’{KEY} command appears. If there is no ‘\label{KEY}’ then you get something like ‘LaTeX Warning: Reference `th:GrensThm' on page 1 undefined on input line 11.’ Below, the ‘\label{eq:main}’ is used both for the formula number and for the page number. (Note that the two references are forward references so this document would need to be compiled twice to resolve those.) The main result is formula~\ref{eq:main} on page~\pageref{eq:main}. ... \begin{equation} \label{eq:main} \mathbf{P}=\mathbf{NP} \end{equation} 7.3 ‘\ref’ ========== Synopsis: \ref{KEY} Produces the number of the sectional unit, equation, footnote, figure, ..., of the corresponding ‘\label’ command (*note \label::). It does not produce any text, such as the word ‘Section’ or ‘Figure’, just the bare number itself. If there is no ‘\label{KEY}’ then you get something like ‘LaTeX Warning: Reference `th:GrensThm' on page 1 undefined on input line 11.’ In this example the ‘\ref{popular}’ produces ‘2’. Note that it is a forward reference since it comes before ‘\label{popular}’ so this document would have to be compiled twice. The most widely-used format is item number~\ref{popular}. \begin{enumerate} \item Plain \TeX \item \label{popular} \LaTeX \item Con\TeX t \end{enumerate} The ‘cleveref’ package includes text such as ‘Theorem’ in the reference. See the documentation on CTAN. 7.4 ‘xr’ package ================ Synopsis: \usepackage{xr} \externaldocument{DOCUMENT-BASENAME} or \usepackage{xr} \externaldocument[REFERENCE-PREFIX]{DOCUMENT-BASENAME} Make cross references to the external document ‘DOCUMENT-BASENAME.tex’. Here is an example. If ‘lectures.tex’ has this in the preamble \usepackage{xr} \externaldocument{exercises} \externaldocument[H-]{hints} \externaldocument{answers} then it can use cross reference labels from the other three documents. Suppose that ‘exercises.tex’ has an enumerated list containing this, \item \label{exer:EulersThm} What if every vertex has odd degree? and ‘hints.tex’ has an enumerated list with this, \item \label{exer:EulersThm} Distinguish the case of two vertices. and ‘answers.tex’ has an enumerated list with this, \item \label{ans:EulersThm} There is no Euler path, except if there are exactly two vertices. After compiling the exercises, hints, and answers documents, entering this in the body of ‘lectures.tex’ will result in the lectures getting the reference numbers used in the other documents. See Exercise~\ref{exer:EulersThm}, with Hint~\ref{H-exer:EulersThm}. The solution is Answer~\ref{ans:EulersThm}. The prefix ‘H-’ for the reference from the hints file is needed because the label in the hints file is the same as the label in the exercises file. Without that prefix, both references would get the number from the later file. Note: if the document uses the ‘hyperref’ package then in place of ‘xr’, put ‘\usepackage{xr-hyper}’ before the ‘\usepackage{hyperref}’. Also, if any of the multiple documents uses ‘hyperref’ then they all must use it. 8 Environments ************** LaTeX provides many environments for delimiting certain behavior. An environment begins with ‘\begin’ and ends with ‘\end’, like this: \begin{ENVIRONMENT-NAME} ... \end{ENVIRONMENT-NAME} The ENVIRONMENT-NAME at the beginning must exactly match that at the end. For instance, the input ‘\begin{table*}...\end{table}’ will cause an error like: ‘! LaTeX Error: \begin{table*} on input line 5 ended by \end{table}.’ Environments are executed within a group. 8.1 ‘abstract’ ============== Synopsis: \begin{abstract} ... \end{abstract} Produce an abstract, possibly of multiple paragraphs. This environment is only defined in the ‘article’ and ‘report’ document classes (*note Document classes::). Using the example below in the ‘article’ class produces a displayed paragraph. Document class option ‘titlepage’ causes the abstract to be on a separate page (*note Document class options::); this is the default only in the ‘report’ class. \begin{abstract} We compare all known accounts of the proposal made by Porter Alexander to Robert E Lee at the Appomattox Court House that the army continue in a guerrilla war, which Lee refused. \end{abstract} The next example produces a one column abstract in a two column document (for a more flexible solution, use the package ‘abstract’). \documentclass[twocolumn]{article} ... \begin{document} \title{Babe Ruth as Cultural Progenitor: a Atavistic Approach} \author{Smith \\ Jones \\ Robinson\thanks{Railroad tracking grant.}} \twocolumn[ \begin{@twocolumnfalse} \maketitle \begin{abstract} Ruth was not just the Sultan of Swat, he was the entire swat team. \end{abstract} \end{@twocolumnfalse} ] { % by-hand insert a footnote at page bottom \renewcommand{\thefootnote}{\fnsymbol{footnote}} \footnotetext[1]{Thanks for all the fish.} } 8.2 ‘array’ =========== Synopsis: \begin{array}{COLS} COLUMN 1 ENTRY &COLUMN 2 ENTRY ... &COLUMN N ENTRY \\ ... \end{array} or: \begin{array}[POS]{COLS} COLUMN 1 ENTRY &COLUMN 2 ENTRY ... &COLUMN N ENTRY \\ ... \end{array} Produce a mathematical array. This environment can only be used in math mode (*note Modes::), and normally appears within a displayed mathematics environment such as ‘equation’ (*note equation::). Inside of each row the column entries are separated by an ampersand, (‘&’). Rows are terminated with double-backslashes (*note \\::). This example shows a three by three array. \begin{equation*} \chi(x) = \left| % vertical bar fence \begin{array}{ccc} x-a &-b &-c \\ -d &x-e &-f \\ -g &-h &x-i \end{array} \right| \end{equation*} The required argument COLS describes the number of columns, their alignment, and the formatting of the intercolumn regions. For instance, ‘\begin{array}{rcl}...\end{array}’ gives three columns: the first flush right, the second centered, and the third flush left. See *note tabular:: for the complete description of COLS and of the other common features of the two environments, including the optional POS argument. There are two ways that ‘array’ diverges from ‘tabular’. The first is that ‘array’ entries are typeset in math mode, in textstyle (*note Math styles::) except if the COLS definition specifies the column with ‘p{...}’, which causes the entry to be typeset in text mode. The second is that, instead of ‘tabular’’s parameter ‘\tabcolsep’, LaTeX’s intercolumn space in an ‘array’ is governed by ‘\arraycolsep’, which gives half the width between columns. The default for this is ‘5pt’ so that between two columns comes 10pt of space. To obtain arrays with braces the standard is to use the ‘amsmath’ package. It comes with environments ‘pmatrix’ for an array surrounded by parentheses ‘(...)’, ‘bmatrix’ for an array surrounded by square brackets ‘[...]’, ‘Bmatrix’ for an array surrounded by curly braces ‘{...}’, ‘vmatrix’ for an array surrounded by vertical bars ‘|...|’, and ‘Vmatrix’ for an array surrounded by double vertical bars ‘||...||’, along with a number of other array constructs. The next example uses the ‘amsmath’ package. \usepackage{amsmath} % in preamble \begin{equation} \begin{vmatrix}{cc} % array with vert lines a &b \\ c &d \end{vmatrix}=ad-bc \end{equation} There are many packages concerning arrays. The ‘array’ package has many useful extensions, including more column types. The ‘dcolumn’ package adds a column type to center on a decimal point. For both see the documentation on CTAN. 8.3 ‘center’ ============ Synopsis: \begin{center} LINE1 \\ LINE2 \\ ... \end{center} Create a new paragraph consisting of a sequence of lines that are centered within the left and right margins. Use double-backslash, ‘\\’, to get a line break (*note \\::). If some text is too long to fit on a line then LaTeX will insert line breaks that avoid hyphenation and avoid stretching or shrinking any interword space. This environment inserts space above and below the text body. See *note \centering:: to avoid such space, for example inside a ‘figure’ environment. This example produces three centered lines. There is extra vertical space between the last two lines. \begin{center} A Thesis Submitted in Partial Fufillment \\ of the Requirements of \\[0.5ex] the School of Environmental Engineering \end{center} In this example, depending on the page’s line width, LaTeX may choose a line break for the part before the double backslash. If so, it will center each of the two lines and if not it will center the single line. Then LaTeX will break at the double backslash, and will center the ending. \begin{center} My father considered that anyone who went to chapel and didn't drink alcohol was not to be tolerated.\\ I grew up in that belief. ---Richard Burton \end{center} A double backslash after the final line is optional. If present it doesn’t add any vertical space. In a two-column document the text is centered in a column, not in the entire page. 8.3.1 ‘\centering’ ------------------ Synopsis: {\centering ... } or \begin{group} \centering ... \end{group} Center the material in its scope. It is most often used inside an environment such as ‘figure’, or in a ‘parbox’. This example’s ‘\centering’ declaration causes the graphic to be horizontally centered. \begin{figure} \centering \includegraphics[width=0.6\textwidth]{ctan_lion.png} \caption{CTAN Lion} \label{fig:CTANLion} \end{figure} The scope of this ‘\centering’ ends with the ‘\end{figure}’. Unlike the ‘center’ environment, the ‘\centering’ command does not add vertical space above and below the text. That’s its advantage in the above example; there is not an excess of space. It also does not start a new paragraph; it simply changes how LaTeX formats paragraph units. If ‘ww {\centering xx \\ yy} zz’ is surrounded by blank lines then LaTeX will create a paragraph whose first line ‘ww xx’ is centered and whose second line, not centered, contains ‘yy zz’. Usually what is desired is for the scope of the declaration to contain a blank line or the ‘\end’ command of an environment such as ‘figure’ or ‘table’ that ends the paragraph unit. Thus, if ‘{\centering xx \\ yy\par} zz’ is surrounded by blank lines then it makes a new paragraph with two centered lines ‘xx’ and ‘yy’, followed by a new paragraph with ‘zz’ that is formatted as usual. 8.4 ‘description’ ================= Synopsis: \begin{description} \item[LABEL OF FIRST ITEM] TEXT OF FIRST ITEM \item[LABEL OF SECOND ITEM] TEXT OF SECOND ITEM ... \end{description} Environment to make a list of labeled items. Each item’s LABEL is typeset in bold and is flush left, so that long labels continue into the first line of the item text. There must be at least one item; having none causes the LaTeX error ‘Something's wrong--perhaps a missing \item’. This example shows the environment used for a sequence of definitions. \begin{description} \item[lama] A priest. \item[llama] A beast. \end{description} The labels ‘lama’ and ‘llama’ are output in boldface, with the left edge on the left margin. Start list items with the ‘\item’ command (*note \item::). Use the optional labels, as in ‘\item[Main point]’, because there is no sensible default. Following the ‘\item’ is optional text, which may contain multiple paragraphs. Since the labels are in bold style, if the label text calls for a font change given in argument style (see *note Font styles::) then it will come out bold. For instance, if the label text calls for typewriter with ‘\item[\texttt{label text}]’ then it will appear in bold typewriter, if that is available. The simplest way around this, in this example to get non-bold typewriter, is to use declarative style: ‘\item[{\tt label text}]’. Similarly, get the standard roman font with ‘\item[{\rm label text}]’. For other major LaTeX labelled list environments, see *note itemize:: and *note enumerate::. Unlike those environments, nesting ‘description’ environments does not change the default label; it is boldface and flush left at all levels. For information about list layout parameters, including the default values, and for information about customizing list layout, see *note list::. The package ‘enumitem’ is useful for customizing lists. This example changes the description labels to small caps. \renewcommand{\descriptionlabel}[1]{% {\hspace{\labelsep}\textsc{#1}}} 8.5 ‘displaymath’ ================= Synopsis: \begin{displaymath} MATHEMATICAL TEXT \end{displaymath} Environment to typeset the MATHEMATICAL TEXT on its own line, in display style and centered. To make the text be flush-left use the global option ‘fleqn’; see *note Document class options::. In the ‘displaymath’ environment no equation number is added to the math text. One way to get an equation number is to use the ‘equation’ environment (*note equation::). LaTeX will not break the MATH TEXT across lines. Note that the ‘amsmath’ package has significantly more extensive displayed equation facilities. For example, there are a number of ways in that package for having math text broken across lines. The construct ‘\[MATH\]’ is a synonym for the environment ‘\begin{displaymath} MATH \end{displaymath}’ but the latter is easier to work with in the source; for instance, searching for a square bracket may get false positives but the word ‘displaymath’ will likely be unique. (Aside: The construct ‘$$MATH$$’ from Plain TeX is sometimes mistakenly used as a synonym for ‘displaymath’. It is not a synonym, and is not officially supported in LaTeX at all; ‘$$’ doesn’t support the ‘fleqn’ option (*note Document class options::), has different vertical spacing, and doesn’t perform consistency checks.) The output from this example is centered and alone on its line. \begin{displaymath} \int_1^2 x^2\,dx=7/3 \end{displaymath} Also, the integral sign is larger than the inline version ‘\( \int_1^2 x^2\,dx=7/3 \)’ produces. 8.6 ‘document’ ============== The ‘document’ environment encloses the entire body of a document. It is required in every LaTeX document. *Note Starting and ending::. 8.6.1 ‘\AtBeginDocument’ ------------------------ Synopsis: \AtBeginDocument{CODE} Save CODE and execute it when ‘\begin{document}’ is executed, at the very end of the preamble. The code is executed after the font selection tables have been set up, so the normal font for the document is the current font. However, the code is executed as part of the preamble so you cannot do any typesetting with it. You can issue this command more than once; the successive code lines will be executed in the order that you gave them. 8.6.2 ‘\AtEndDocument’ ---------------------- Synopsis: \AtEndDocument{CODE} Save CODE and execute it near the end of the document. Specifically, it is executed when ‘\end{document}’ is executed, before the final page is finished and before any leftover floating environments are processed. If you want some of the code to be executed after these two processes then include a ‘\clearpage’ at the appropriate point in CODE. You can issue this command more than once; the successive code lines will be executed in the order that you gave them. 8.7 ‘enumerate’ =============== Synopsis: \begin{enumerate} \item[OPTIONAL LABEL OF FIRST ITEM] TEXT OF FIRST ITEM \item[OPTIONAL LABEL OF SECOND ITEM] TEXT OF SECOND ITEM ... \end{enumerate} Environment to produce a numbered list of items. The format of the label numbering depends on the nesting level of this environment; see below. The default top-level numbering is ‘1.’, ‘2.’, etc. Each ‘enumerate’ list environment must have at least one item; having none causes the LaTeX error ‘Something's wrong--perhaps a missing \item’. This example gives the first two finishers in the 1908 Olympic marathon. As a top-level list the labels would come out as ‘1.’ and ‘2.’. \begin{enumerate} \item Johnny Hayes (USA) \item Charles Hefferon (RSA) \end{enumerate} Start list items with the ‘\item’ command (*note \item::). If you give ‘\item’ an optional argument by following it with square brackets, as in ‘\item[Interstitial label]’, then the next item will continue the interrupted sequence (*note \item::). That is, you will get labels like ‘1.’, then ‘Interstitial label’, then ‘2.’. Following the ‘\item’ is optional text, which may contain multiple paragraphs. Enumerations may be nested within other ‘enumerate’ environments, or within any paragraph-making environment such as ‘itemize’ (*note itemize::), up to four levels deep. This gives LaTeX’s default for the format at each nesting level, where 1 is the top level, the outermost level. 1. arabic number followed by a period: ‘1.’, ‘2.’, ... 2. lowercase letter inside parentheses: ‘(a)’, ‘(b)’ ... 3. lowercase roman numeral followed by a period: ‘i.’, ‘ii.’, ... 4. uppercase letter followed by a period: ‘A.’, ‘B.’, ... The ‘enumerate’ environment uses the counters ‘\enumi’ through ‘\enumiv’ (*note Counters::). For other major LaTeX labeled list environments, see *note description:: and *note itemize::. For information about list layout parameters, including the default values, and for information about customizing list layout, see *note list::. The package ‘enumitem’ is useful for customizing lists. To change the format of the label use ‘\renewcommand’ (*note \newcommand & \renewcommand::) on the commands ‘\labelenumi’ through ‘\labelenumiv’. For instance, this first level list will be labelled with uppercase letters, in boldface, and without a trailing period. \renewcommand{\labelenumi}{\textbf{\Alph{enumi}}} \begin{enumerate} \item Shows as boldface A \item Shows as boldface B \end{enumerate} For a list of counter-labeling commands see *note \alph \Alph \arabic \roman \Roman \fnsymbol::. 8.8 ‘eqnarray’ ============== The ‘eqnarray’ environment is obsolete. It has infelicities, including spacing that is inconsistent with other mathematics elements. (See “Avoid eqnarray!” by Lars Madsen ). New documents should include the ‘amsmath’ package and use the displayed mathematics environments provided there, such as the ‘align’ environment. We include a description only for completeness and for working with old documents. Synopsis: \begin{eqnarray} FIRST FORMULA LEFT &FIRST FORMULA MIDDLE &FIRST FORMULA RIGHT \\ ... \end{eqnarray} or \begin{eqnarray*} FIRST FORMULA LEFT &FIRST FORMULA MIDDLE &FIRST FORMULA RIGHT \\ ... \end{eqnarray*} Display a sequence of equations or inequalities. The left and right sides are typeset in display mode, while the middle is typeset in text mode. It is similar to a three-column ‘array’ environment, with items within a row separated by an ampersand (‘&’), and with rows separated by double backslash ‘\\’). The starred form of line break (‘\\*’) can also be used to separate equations, and will disallow a page break there (*note \\::). The unstarred form ‘eqnarray’ places an equation number on every line (using the ‘equation’ counter), unless that line contains a ‘\nonumber’ command. The starred form ‘eqnarray*’ omits equation numbering, while otherwise being the same. The command ‘\lefteqn’ is used for splitting long formulas across lines. It typesets its argument in display style flush left in a box of zero width. This example shows three lines. The first two lines make an inequality, while the third line has not entry on the left side. \begin{eqnarray*} \lefteqn{x_1+x_2+\cdots+x_n} \\ &\leq &y_1+y_2+\cdots+y_n \\ &= &z+y_3+\cdots+y_n \end{eqnarray*} 8.9 ‘equation’ ============== Synopsis: \begin{equation} MATHEMATICAL TEXT \end{equation} The same as a ‘displaymath’ environment (*note displaymath::) except that LaTeX puts an equation number flush to the right margin. The equation number is generated using the ‘equation’ counter. You should have no blank lines between ‘\begin{equation}’ and ‘\begin{equation}’, or LaTeX will tell you that there is a missing dollar sign. The package ‘amsmath’ package has extensive displayed equation facilities. New documents should include this package. 8.10 ‘figure’ ============= Synopsis: \begin{figure}[PLACEMENT] FIGURE BODY \caption[LOFTITLE]{TITLE} % optional \label{LABEL} % optional \end{figure} or: \begin{figure*}[PLACEMENT] FIGURE BODY \caption[LOFTITLE]{TITLE} % optional \label{LABEL} % optional \end{figure*} Figures are for material that is not part of the normal text. An example is material that you cannot have split between two pages, such as a graphic. Because of this, LaTeX does not typeset figures in sequence with normal text but instead “floats” them to a convenient place, such as the top of a following page (*note Floats::). The FIGURE BODY can consist of imported graphics (*note Graphics::), or text, LaTeX commands, etc. It is typeset in a ‘parbox’ of width ‘\textwidth’. The possible values of PLACEMENT are ‘h’ for ‘here’, ‘t’ for ‘top’, ‘b’ for ‘bottom’, and ‘p’ for ‘on a separate page of floats’. For the effect of these options on the float placement algorithm, see *note Floats::. The starred form ‘figure*’ is used when a document is in double-column mode (*note \twocolumn::). It produces a figure that spans both columns, at the top of the page. To add the possibility of placing at a page bottom see the discussion of PLACEMENT ‘b’ in *note Floats::. The label is optional; it is used for cross references (*note Cross references::). The optional ‘\caption’ command specifies caption text for the figure (*note \caption::). By default it is numbered. If LOFTITLE is present, it is used in the list of figures instead of TITLE (*note Table of contents etc.::). This example makes a figure out of a graphic. LaTeX will place that graphic and its caption at the top of a page or, if it is pushed to the end of the document, on a page of floats. \usepackage{graphicx} % in preamble ... \begin{figure}[t] \centering \includegraphics[width=0.5\textwidth]{CTANlion.png} \caption{The CTAN lion, by Duane Bibby} \end{figure} 8.11 ‘filecontents’ =================== Synopsis: \begin{filecontents}[OPTION]{FILENAME} TEXT \end{filecontents} or \begin{filecontents*}[OPTION]{FILENAME} TEXT \end{filecontents*} Create a file named FILENAME in the current directory (or the output directory, if specified; *note output directory::) and write TEXT to it. By default, an existing file is not overwritten. The unstarred version of the environment ‘filecontents’ prefixes the content of the created file with a header of TeX comments; see the example below. The starred version ‘filecontents*’ does not include the header. The possible options are: ‘force’ ‘overwrite’ Overwrite an existing file. ‘noheader’ Omit the header. Equivalent to using ‘filecontents*’. ‘nosearch’ Only check the current directory (and the output directory, if specified) for an existing file, not the entire search path. These options were added in a 2019 release of LaTeX. This environment can be used anywhere in the preamble, although it often appears before the ‘\documentclass’ command. It is commonly used to create a ‘.bib’ or other such data file from the main document source, to make the source file self-contained. Similarly, it can be used to create a custom style or class file, again making the source self-contained. For example, this document: \documentclass{article} \begin{filecontents}{JH.sty} \newcommand{\myname}{Jim Hef{}feron} \end{filecontents} \usepackage{JH} \begin{document} Article by \myname. \end{document} produces this file ‘JH.sty’: %% LaTeX2e file `JH.sty' %% generated by the `filecontents' environment %% from source `test' on 2015/10/12. %% \newcommand{\myname}{Jim Hef{}feron} 8.12 ‘flushleft’ ================ Synopsis: \begin{flushleft} LINE1 \\ LINE2 \\ ... \end{flushleft} An environment that creates a paragraph whose lines are flush to the left-hand margin, and ragged right. If you have lines that are too long then LaTeX will linebreak them in a way that avoids hyphenation and stretching or shrinking interword spaces. To force a new line use a double backslash, ‘\\’. For the declaration form see *note \raggedright::. This creates a box of text that is at most 3 inches wide, with the text flush left and ragged right. \noindent\begin{minipage}{3in} \begin{flushleft} A long sentence that will be broken by \LaTeX{} at a convenient spot. \\ And, a fresh line forced by the double backslash. \end{flushleft} \end{minipage} 8.12.1 ‘\raggedright’ --------------------- Synopses: {\raggedright ... } or \begin{ENVIRONMENT} \raggedright ... \end{ENVIRONMENT} A declaration which causes lines to be flush to the left margin and ragged right. It can be used inside an ENVIRONMENT such as ‘quote’ or in a ‘parbox’. For the environment form see *note flushleft::. Unlike the ‘flushleft’ environment, the ‘\raggedright’ command does not start a new paragraph; it only changes how LaTeX formats paragraph units. To affect a paragraph unit’s format, the scope of the declaration must contain the blank line or ‘\end’ command that ends the paragraph unit. Here ‘\raggedright’ in each second column keeps LaTeX from doing awkward typesetting to fit the text into the narrow column. Note that ‘\raggedright’ is inside the curly braces ‘{...}’ to delimit its effect. \begin{tabular}{rp{2in}} Team alpha &{\raggedright This team does all the real work.} \\ Team beta &{\raggedright This team ensures that the water cooler is never empty.} \\ \end{tabular} 8.13 ‘flushright’ ================= \begin{flushright} LINE1 \\ LINE2 \\ ... \end{flushright} An environment that creates a paragraph whose lines are flush to the right-hand margin and ragged left. If you have lines that are too long to fit the margins then LaTeX will linebreak them in a way that avoids hyphenation and stretching or shrinking inter-word spaces. To force a new line use a double backslash, ‘\\’. For the declaration form see *note \raggedleft::. For an example related to this environment, see *note flushleft::, where one just have mutatis mutandis to replace ‘flushleft’ by ‘flushright’. 8.13.1 ‘\raggedleft’ -------------------- Synopses: {\raggedleft ... } or \begin{ENVIRONMENT} \raggedleft ... \end{ENVIRONMENT} A declaration which causes lines to be flush to the right margin and ragged left. It can be used inside an ENVIRONMENT such as ‘quote’ or in a ‘parbox’. For the environment form see *note flushright::. Unlike the ‘flushright’ environment, the ‘\raggedleft’ command does not start a new paragraph; it only changes how LaTeX formats paragraph units. To affect a paragraph unit’s format, the scope of the declaration must contain the blank line or ‘\end’ command that ends the paragraph unit. For an example related to this environment, see *note \raggedright::, where one just have mutatis mutandis to replace ‘\raggedright’ by ‘\raggedleft’. 8.14 ‘itemize’ ============== Synopsis: \begin{itemize} \item[OPTIONAL LABEL OF FIRST ITEM] TEXT OF FIRST ITEM \item[OPTIONAL LABEL OF SECOND ITEM] TEXT OF SECOND ITEM ... \end{itemize} Produce an “unordered list”, sometimes called a bullet list. There must be at least one ‘\item’ within the environment; having none causes the LaTeX error ‘Something's wrong--perhaps a missing \item’. This gives a two-item list. \begin{itemize} \item Pencil and watercolor sketch by Cassandra \item Rice portrait \end{itemize} With the default locale—without loading e.g. ‘babel’ package with another language than USenglish—as a top-level list each label would come out as a bullet, •. The format of the labeling depends on the nesting level; see below. Start list items with the ‘\item’ command (*note \item::). If you give ‘\item’ an optional argument by following it with square brackets, as in ‘\item[OPTIONAL LABEL]’, then by default OPTIONAL LABEL will appear in bold and be flush right, so it could extend into the left margin. For labels that are flush left see the *note description:: environment. Following the ‘\item’ is the text of the item, which may be empty or contain multiple paragraphs. Unordered lists can be nested within one another, up to four levels deep. They can also be nested within other paragraph-making environments, such as ‘enumerate’ (*note enumerate::). The ‘itemize’ environment uses the commands ‘\labelitemi’ through ‘\labelitemiv’ to produce the default label (note the convention of lowercase roman numerals at the end of the command names that signify the nesting level). These are the default marks at each level. 1. • (bullet, from ‘\textbullet’) 2. -- (bold en-dash, from ‘\normalfont\bfseries\textendash’) 3. * (asterisk, from ‘\textasteriskcentered’) 4. . (vertically centered dot, rendered here as a period, from ‘\textperiodcentered’) Change the labels with ‘\renewcommand’. For instance, this makes the first level use diamonds. \renewcommand{\labelitemi}{$\diamond$} The distance between the left margin of the enclosing environment and the left margin of the ‘itemize’ list is determined by the parameters ‘\leftmargini’ through ‘\leftmarginvi’. (This also uses the convention of using lowercase roman numerals a the end of the command name to denote the nesting level.) The defaults are: ‘2.5em’ in level 1 (‘2em’ in two-column mode), ‘2.2em’ in level 2, ‘1.87em’ in level 3, and ‘1.7em’ in level 4, with smaller values for more deeply nested levels. For other major LaTeX labeled list environments, see *note description:: and *note enumerate::. The ‘itemize’, ‘enumerate’ and ‘description’ environment use the same list layout parameters. For a description, including the default values, and for information about customizing list layout, see *note list::. The package ‘enumitem’ is useful for customizing lists. This example greatly reduces the margin space for outermost itemized lists. \setlength{\leftmargini}{1.25em} % default 2.5em Especially for lists with short items, it may be desirable to elide space between items. Here is an example defining an ‘itemize*’ environment with no extra spacing between items, or between paragraphs within a single item (‘\parskip’ is not list-specific, *note \parindent & \parskip::): \newenvironment{itemize*}% {\begin{itemize}% \setlength{\itemsep}{0pt}% \setlength{\parsep}{0pt}}% \setlength{\parskip}{0pt}}% {\end{itemize}} 8.15 ‘letter’ environment: writing letters ========================================== This environment is used for creating letters. *Note Letters::. 8.16 ‘list’ =========== Synopsis: \begin{list}{LABELING}{SPACING} \item[OPTIONAL LABEL OF FIRST ITEM] TEXT OF FIRST ITEM \item[OPTIONAL LABEL OF SECOND ITEM] TEXT OF SECOND ITEM ... \end{list} An environment for constructing lists. Note that this environment does not typically appear in the document body. Most lists created by LaTeX authors are the ones that come standard: the ‘description’, ‘enumerate’, and ‘itemize’ environments (*note description::, *note enumerate::, and *note itemize::). Instead, the ‘list’ environment is most often used in macros. For example, many standard LaTeX environments that do not immediately appear to be lists are in fact constructed using ‘list’, including ‘quotation’, ‘quote’, and ‘center’ (*note quotation & quote::, *note center::). This uses the ‘list’ environment to define a new custom environment. \newcounter{namedlistcounter} % number the items \newenvironment{named} {\begin{list} {Item~\Roman{namedlistcounter}.} % labeling {\usecounter{namedlistcounter} % set counter \setlength{\leftmargin}{3.5em}} % set spacing } {\end{list}} \begin{named} \item Shows as ``Item~I.'' \item[Special label.] Shows as ``Special label.'' \item Shows as ``Item~II.'' \end{named} The mandatory first argument LABELING specifies the default labeling of list items. It can contain text and LaTeX commands, as above where it contains both ‘Item’ and ‘\Roman{...}’. LaTeX forms the label by putting the LABELING argument in a box of width ‘\labelwidth’. If the label is wider than that, the additional material extends to the right. When making an instance of a ‘list’ you can override the default labeling by giving ‘\item’ an optional argument by including square braces and the text, as in the above ‘\item[Special label.]’; *note \item::. The mandatory second argument SPACING has a list of commands. This list can be empty. A command that can go in here is ‘\usecounter{COUNTERNAME}’ (*note \usecounter::). Use this to tell LaTeX to number the items using the given counter. The counter will be reset to zero each time LaTeX enters the environment, and the counter is incremented by one each time LaTeX encounters an ‘\item’ that does not have an optional argument. Another command that can go in SPACING is ‘\makelabel’, which constructs the label box. By default it puts the contents flush right. Its only argument is the label, which it typesets in LR mode (*note Modes::). One example of changing its definition is that to the above ‘named’ example, before the definition of the environment add ‘\newcommand{\namedmakelabel}[1]{\textsc{#1}}’, and between the ‘\setlength’ command and the parenthesis that closes the SPACING argument also add ‘\let\makelabel\namedmakelabel’. Then the labels will be typeset in small caps. Similarly, changing the second code line to ‘\let\makelabel\fbox’ puts the labels inside a framed box. Another example of the ‘\makelabel’ command is below, in the definition of the ‘redlabel’ environment. Also often in SPACING are commands to redefine the spacing for the list. Below are the spacing parameters with their default values. (Default values for derived environments such as ‘itemize’ can be different than the values shown here.) See also the figure that follows the list. Each is a length (*note Lengths::). The vertical spaces are normally rubber lengths, with ‘plus’ and ‘minus’ components, to give TeX flexibility in setting the page. Change each with a command such as ‘\setlength{itemsep}{2pt plus1pt minus1pt}’. For some effects these lengths should be zero or negative. ‘\itemindent’ Extra horizontal space indentation, beyond ‘leftmargin’, of the first line each item. Its default value is ‘0pt’. ‘\itemsep’ Vertical space between items, beyond the ‘\parsep’. The defaults for the first three levels in LaTeX’s ‘article’, ‘book’, and ‘report’ classes at 10 point size are: ‘4pt plus2pt minus1pt’, ‘\parsep’ (that is, ‘2pt plus1pt minus1pt’), and ‘\topsep’ (that is, ‘2pt plus1pt minus1pt’). The defaults at 11 point are: ‘4.5pt plus2pt minus1pt’, ‘\parsep’ (that is, ‘2pt plus1pt minus1pt’), and ‘\topsep’ (that is, ‘2pt plus1pt minus1pt’). The defaults at 12 point are: ‘5pt plus2.5pt minus1pt’, ‘\parsep’ (that is, ‘2.5pt plus1pt minus1pt’), and ‘\topsep’ (that is, ‘2.5pt plus1pt minus1pt’). ‘\labelsep’ Horizontal space between the label and text of an item. The default for LaTeX’s ‘article’, ‘book’, and ‘report’ classes is ‘0.5em’. ‘\labelwidth’ Horizontal width. The box containing the label is nominally this wide. If ‘\makelabel’ returns text that is wider than this then the first line of the item will be indented to make room for this extra material. If ‘\makelabel’ returns text of width less than or equal to ‘\labelwidth’ then LaTeX’s default is that the label is typeset flush right in a box of this width. The left edge of the label box is ‘\leftmargin’+‘\itemindent’-‘\labelsep’-‘\labelwidth’ from the left margin of the enclosing environment. The default for LaTeX’s ‘article’, ‘book’, and ‘report’ classes at the top level is ‘\leftmargini’-‘\labelsep’, (which is ‘2em’ in one column mode and ‘1.5em’ in two column mode). At the second level it is ‘\leftmarginii’-‘\labelsep’, and at the third level it is ‘\leftmarginiii’-‘\labelsep’. These definitions make the label’s left edge coincide with the left margin of the enclosing environment. ‘\leftmargin’ Horizontal space between the left margin of the enclosing environment (or the left margin of the page if this is a top-level list), and the left margin of this list. It must be non-negative. In the standard LaTeX document classes, a top-level list has this set to the value of ‘\leftmargini’, while a list that is nested inside a top-level list has this margin set to ‘\leftmarginii’. More deeply nested lists get the values of ‘\leftmarginiii’ through ‘\leftmarginvi’. (Nesting greater than level five generates the error message ‘Too deeply nested’.) The defaults for the first three levels in LaTeX’s ‘article’, ‘book’, and ‘report’ classes are: ‘\leftmargini’ is ‘2.5em’ (in two column mode, ‘2em’), ‘\leftmarginii’ is ‘2.2em’, and ‘\leftmarginiii’ is ‘1.87em’. ‘\listparindent’ Horizontal space of additional line indentation, beyond ‘\leftmargin’, for second and subsequent paragraphs within a list item. A negative value makes this an “outdent”. Its default value is ‘0pt’. ‘\parsep’ Vertical space between paragraphs within an item. The defaults for the first three levels in LaTeX’s ‘article’, ‘book’, and ‘report’ classes at 10 point size are: ‘4pt plus2pt minus1pt’, ‘2pt plus1pt minus1pt’, and ‘0pt’. The defaults at 11 point size are: ‘4.5pt plus2pt minus1pt’, ‘2pt plus1pt minus1pt’, and ‘0pt’. The defaults at 12 point size are: ‘5pt plus2.5pt minus1pt’, ‘2.5pt plus1pt minus1pt’, and ‘0pt’. ‘\partopsep’ Vertical space added, beyond ‘\topsep’+‘\parskip’, to the top and bottom of the entire environment if the list instance is preceded by a blank line. (A blank line in the LaTeX source before the list changes spacing at both the top and bottom of the list; whether the line following the list is blank does not matter.) The defaults for the first three levels in LaTeX’s ‘article’, ‘book’, and ‘report’ classes at 10 point size are: ‘2pt plus1 minus1pt’, ‘2pt plus1pt minus1pt’, and ‘1pt plus0pt minus1pt’. The defaults at 11 point are: ‘3pt plus1pt minus1pt’, ‘3pt plus1pt minus1pt’, and ‘1pt plus0pt minus1pt’). The defaults at 12 point are: ‘3pt plus2pt minus3pt’, ‘3pt plus2pt minus2pt’, and ‘1pt plus0pt minus1pt’. ‘\rightmargin’ Horizontal space between the right margin of the list and the right margin of the enclosing environment. Its default value is ‘0pt’. It must be non-negative. ‘\topsep’ Vertical space added to both the top and bottom of the list, in addition to ‘\parskip’ (*note \parindent & \parskip::). The defaults for the first three levels in LaTeX’s ‘article’, ‘book’, and ‘report’ classes at 10 point size are: ‘8pt plus2pt minus4pt’, ‘4pt plus2pt minus1pt’, and ‘2pt plus1pt minus1pt’. The defaults at 11 point are: ‘9pt plus3pt minus5pt’, ‘4.5pt plus2pt minus1pt’, and ‘2pt plus1pt minus1pt’. The defaults at 12 point are: ‘10pt plus4pt minus6pt’, ‘5pt plus2.5pt minus1pt’, and ‘2.5pt plus1pt minus1pt’. This shows the horizontal and vertical distances. ....................................................................... ..............Surrounding environment, preceding material.............. - | v0 |---h0--|-h1-| | ..Label.. .....First item..................................... - ............................................................ ............................................................ - | v1 ........First item, second paragraph .................. - |-h2-| | v2 | ..Label.. .....Second item.................................... - ............................................................ ............................................................ - |-h3--|-h4-| |-h5-| |v3 | ..............Surrounding environment, following material.............. - ....................................................................... The lengths shown are listed below. The key relationship is that the right edge of the bracket for H1 equals the right edge of the bracket for H4, so that the left edge of the label box is at H3+H4-(H0+H1). V0 ‘\topsep’ + ‘\parskip’ if the list environment does not start a new paragraph, and ‘\topsep’+‘\parskip’+‘\partopsep’ if it does V1 ‘\parsep’ V2 ‘\itemsep’+‘\parsep’ V3 Same as V0. (This space is affected by whether a blank line appears in the source above the environment; whether a blank line appears in the source below the environment does not matter.) H0 ‘\labelwidth’ H1 ‘\labelsep’ H2 ‘\listparindent’ H3 ‘\leftmargin’ H4 ‘\itemindent’ H5 ‘\rightmargin’ The list’s left and right margins, shown above as H3 and H5, are with respect to the ones provided by the surrounding environment, or with respect to the page margins for a top-level list. The line width used for typesetting the list items is ‘\linewidth’ (*note Page layout parameters::). For instance, set the list’s left margin to be one quarter of the distance between the left and right margins of the enclosing environment with ‘\setlength{\leftmargin}{0.25\linewidth}’. Page breaking in a list structure is controlled by the three parameters below. For each, the LaTeX default is ‘-\@lowpenalty’, that is, ‘-51’. Because it is negative, it somewhat encourages a page break at each spot. Change it with, e.g., ‘\@beginparpenalty=9999’; a value of 10000 prohibits a page break. ‘\@beginparpenalty’ The page breaking penalty for breaking before the list (default ‘-51’). ‘\@itempenalty’ The page breaking penalty for breaking before a list item (default ‘-51’). ‘\@endparpenalty’ The page breaking penalty for breaking after a list (default ‘-51’). The package ‘enumitem’ is useful for customizing lists. This example has the labels in red. They are numbered, and the left edge of the label lines up with the left edge of the item text. *Note \usecounter::. \usepackage{color} \newcounter{cnt} \newcommand{\makeredlabel}[1]{\textcolor{red}{#1.}} \newenvironment{redlabel} {\begin{list} {\arabic{cnt}} {\usecounter{cnt} \setlength{\labelwidth}{0em} \setlength{\labelsep}{0.5em} \setlength{\leftmargin}{1.5em} \setlength{\itemindent}{0.5em} % equals \labelwidth+\labelsep \let\makelabel=\makeredlabel } } {\end{list}} 8.16.1 ‘\item’: An entry in a list ---------------------------------- Synopsis: \item text of item or \item[OPTIONAL-LABEL] text of item An entry in a list. The entries are prefixed by a label, whose default depends on the list type. Because the optional label is surrounded by square brackets ‘[...]’, if you have an item whose text starts with [, you have to hide the bracket inside curly braces, as in: ‘\item {[} is an open square bracket’; otherwise, LaTeX will think it marks the start of an optional label. Similarly, if the item does have the optional label and you need a close square bracket inside that label, you must hide it in the same way: ‘\item[Close square bracket, {]}]’. *Note LaTeX command syntax::. In this example the enumerate list has two items that use the default label and one that uses the optional label. \begin{enumerate} \item Moe \item[sometimes] Shemp \item Larry \end{enumerate} The first item is labelled ‘1.’, the second item is labelled ‘sometimes’, and the third item is labelled ‘2.’. Because of the optional label in the second item, the third item is not labelled ‘3.’. 8.16.2 ‘trivlist’: A restricted form of ‘list’ ---------------------------------------------- Synopsis: \begin{trivlist} ... \end{trivlist} A restricted version of the list environment, in which margins are not indented and an ‘\item’ without an optional argument produces no text. It is most often used in macros, to define an environment where the ‘\item’ command is part of the environment’s definition. For instance, the ‘center’ environment is defined essentially like this: \newenvironment{center} {\begin{trivlist}\centering\item\relax} {\end{trivlist}} Using ‘trivlist’ in this way allows the macro to inherit some common code: combining vertical space of two adjacent environments; detecting whether the text following the environment should be considered a new paragraph or a continuation of the previous one; adjusting the left and right margins for possible nested list environments. Specifically, ‘trivlist’ uses the current values of the list parameters (*note list::), except that ‘\parsep’ is set to the value of ‘\parskip’, and ‘\leftmargin’, ‘\labelwidth’, and ‘\itemindent’ are set to zero. This example outputs the items as two paragraphs, except that (by default) they have no paragraph indent and are vertically separated. \begin{trivlist} \item The \textit{Surprise} is not old; no one would call her old. \item She has a bluff bow, lovely lines. \end{trivlist} 8.17 ‘math’ =========== Synopsis: \begin{math} MATH \end{math} The ‘math’ environment inserts given MATH material within the running text. ‘\(...\)’ and ‘$...$’ are synonyms. *Note Math formulas::. 8.18 ‘minipage’ =============== Synopses: \begin{minipage}{WIDTH} CONTENTS \end{minipage} or \begin{minipage}[POSITION][HEIGHT][INNER-POS]{WIDTH} CONTENTS \end{minipage} Put CONTENTS into a box that is WIDTH wide. This is like a small version of a page; it can contain its own footnotes, itemized lists, etc. (There are some restrictions, including that it cannot have floats.) This box will not be broken across pages. So ‘minipage’ is similar to ‘\parbox’ (*note \parbox::) but here you can have paragraphs. This example will be 3 inches wide, and has two paragraphs. \begin{minipage}{3in} Stephen Kleene was a founder of the Theory of Computation. He was a student of Church, wrote three influential texts, was President of the Association for Symbolic Logic, and won the National Medal of Science. \end{minipage} See below for a discussion of the paragraph indent inside a ‘minipage’. The required argument WIDTH is a rigid length (*note Lengths::). It gives the width of the box into which CONTENTS are typeset. There are three optional arguments, POSITION, HEIGHT, and INNER-POS. You need not include all three. For example, get the default POSITION and set the HEIGHT with ‘\begin{minipage}[c][2.54cm]{\columnwidth} CONTENTS \end{minipage}’. (Get the natural height with an empty argument, ‘[]’.) The optional argument POSITION governs how the ‘minipage’ vertically aligns with the surrounding material. ‘c’ (synonym ‘m’) Default. Positions the ‘minipage’ so its vertical center lines up with the center of the adjacent text line. ‘t’ Align the baseline of the top line in the ‘minipage’ with the baseline of the surrounding text (plain TeX’s ‘\vtop’). ‘b’ Align the baseline of the bottom line in the ‘minipage’ with the baseline of the surrounding text (plain TeX’s ‘\vbox’). To see the effects of these, contrast running this ---\begin{minipage}[c]{0.25in} first\\ second\\ third \end{minipage} with the results of changing ‘c’ to ‘b’ or ‘t’. The optional argument HEIGHT is a rigid length (*note Lengths::). It sets the height of the ‘minipage’. You can enter any value larger than, or equal to, or smaller than the ‘minipage’’s natural height and LaTeX will not give an error or warning. You can also set it to a height of zero or a negative value. The final optional argument INNER-POS controls the placement of CONTENTS inside the box. These are the possible values are (the default is the value of POSITION). ‘t’ Place CONTENTS at the top of the box. ‘c’ Place it in the vertical center. ‘b’ Place it at the box bottom. ‘s’ Stretch CONTENTS out vertically; it must contain vertically stretchable space. The INNER-POS argument makes sense when the HEIGHT option is set to a value larger than the ‘minipage’’s natural height. To see the effect of the options, run this example with the various choices in place of ‘b’. Text before \begin{center} ---\begin{minipage}[c][3in][b]{0.25\textwidth} first\\ second\\ third \end{minipage} \end{center} Text after By default paragraphs are not indented in a ‘minipage’. Change that with a command such as ‘\setlength{\parindent}{1pc}’ at the start of CONTENTS. Footnotes in a ‘minipage’ environment are handled in a way that is particularly useful for putting footnotes in figures or tables. A ‘\footnote’ or ‘\footnotetext’ command puts the footnote at the bottom of the minipage instead of at the bottom of the page, and it uses the ‘\mpfootnote’ counter instead of the ordinary ‘footnote’ counter (*note Counters::). This puts the footnote at the bottom of the table, not the bottom of the page. \begin{center} % center the minipage on the line \begin{minipage}{2.5in} \begin{center} % center the table inside the minipage \begin{tabular}{ll} \textsc{Monarch} &\textsc{Reign} \\ \hline Elizabeth II &63 years\footnote{to date} \\ Victoria &63 years \\ George III &59 years \end{tabular} \end{center} \end{minipage} \end{center} If you nest minipages then there is an oddness when using footnotes. Footnotes appear at the bottom of the text ended by the next ‘\end{minipage}’ which may not be their logical place. This puts a table containing data side by side with a map graphic. They are vertically centered. % siunitx to have the S column specifier, % which aligns numbers on their decimal point. \usepackage{siunitx} \newcommand*{\vcenteredhbox}[1]{\begin{tabular}{@{}c@{}}#1\end{tabular}} ... \begin{center} \vcenteredhbox{\includegraphics[width=0.3\textwidth]{nyc.png}} \hspace{0.1\textwidth} \begin{minipage}{0.5\textwidth} \begin{tabular}{r|S} % \multicolumn to remove vertical bar between column headers \multicolumn{1}{r}{Borough} & % braces to prevent siunitx from misinterpreting the % period as a decimal separator {Pop. (million)} \\ \hline The Bronx &1.5 \\ Brooklyn &2.6 \\ Manhattan &1.6 \\ Queens &2.3 \\ Staten Island &0.5 \end{tabular} \end{minipage} \end{center} 8.19 ‘picture’ ============== Synopses: \begin{picture}(WIDTH,HEIGHT) PICTURE COMMAND \end{picture} or \begin{picture}(WIDTH,HEIGHT)(XOFFSET,YOFFSET) PICTURE COMMAND \end{picture} Where there may be any number of PICTURE COMMAND’s. An environment to create simple pictures containing lines, arrows, boxes, circles, and text. This environment is not obsolete, but new documents typically use much more powerful graphics creation systems, such as TikZ, PSTricks, MetaPost, or Asymptote. None of these are covered in this document; see CTAN. To start, here’s an example showing the parallelogram law for adding vectors. \setlength{\unitlength}{1cm} \begin{picture}(6,6) % picture box will be 6cm wide by 6cm tall \put(0,0){\vector(2,1){4}} % for every 2 over this vector goes 1 up \put(2,1){\makebox(0,0)[l]{\ first leg}} \put(4,2){\vector(1,2){2}} \put(5,4){\makebox(0,0)[l]{\ second leg}} \put(0,0){\vector(1,1){6}} \put(3,3){\makebox(0,0)[r]{sum\ }} \end{picture} The ‘picture’ environment has one required argument, a pair of positive real numbers (WIDTH,HEIGHT). Multiply these by the value ‘\unitlength’ to get the nominal size of the output, i.e. the space that LaTeX reserves on the output page. This nominal size need not be how large the picture really is; LaTeX will draw things from the picture outside the picture’s box. This environment also has an optional argument (XOFFSET,YOFFSET). It is used to shift the origin. Unlike most optional arguments, this one is not contained in square brackets. As with the required argument, it consists of a pair of two real numbers, but these may also be negative or null. Multiply these by ‘\unitlength’ to get the coordinates of the point at the lower-left corner of the picture. For example, if ‘\unitlength’ has been set to ‘1mm’, the command \begin{picture}(100,200)(10,20) produces a box of width 100 millimeters and height 200 millimeters. The picture’s origin is the point (10mm,20mm) and so the lower-left corner is there, and the upper-right corner is at (110mm,220mm). When you first draw a picture you typically omit the optional argument, leaving the origin at the lower-left corner. If you then want to modify your picture by shifting everything, you can just add the appropriate optional argument. Each PICTURE COMMAND tells LaTeX where to put something by providing its position. A “position” is a pair such as ‘(2.4,-5)’ giving the x- and y-coordinates. A “coordinate” is a not a length, it is a real number (it may have a decimal point or a minus sign). It specifies a length in multiples of the unit length ‘\unitlength’, so if ‘\unitlength’ has been set to ‘1cm’, then the coordinate ‘2.54’ specifies a length of 2.54 centimeters. LaTeX’s default for ‘\unitlength’ is ‘1pt’. It is a rigid length (*note Lengths::). Change it with the ‘\setlength’ command (*note \setlength::). Make this change only outside of a ‘picture’ environment. The ‘picture’ environment supports using standard arithmetic expressions as well as numbers. Coordinates are given with respect to an origin, which is by default at the lower-left corner of the picture. Note that when a position appears as an argument, as with ‘\put(1,2){...}’, it is not enclosed in braces since the parentheses serve to delimit the argument. Also, unlike in some computer graphics systems, larger y-coordinates are further up the page, for example, y = 1 is _above_ y = 0. There are four ways to put things in a picture: ‘\put’, ‘\multiput’, ‘\qbezier’, and ‘\graphpaper’. The most often used is ‘\put’. This \put(11.3,-0.3){...} places the object with its reference point at coordinates (11.3,-0.3). The reference points for various objects will be described below. The ‘\put’ command creates an “LR box” (*note Modes::). Anything that can go in an ‘\mbox’ (*note \mbox & \makebox::) can go in the text argument of the ‘\put’ command. The reference point will be the lower left corner of the box. In this picture \setlength{\unitlength}{1cm} ...\begin{picture}(1,1) \put(0,0){\line(1,0){1}} \put(0,0){\line(1,1){1}} \end{picture} the three dots are just slightly left of the point of the angle formed by the two lines. (Also, ‘\line(1,1){1}’ does not call for a line of length one; rather the line has a change in the x coordinate of 1.) The ‘\multiput’, ‘qbezier’, and ‘graphpaper’ commands are described below. You can also use this environment to place arbitrary material at an exact location. For example: \usepackage{color,graphicx} % in preamble ... \begin{center} \setlength{\unitlength}{\textwidth} \begin{picture}(1,1) % leave space, \textwidth wide and tall \put(0,0){\includegraphics[width=\textwidth]{desertedisland.jpg}} \put(0.25,0.35){\textcolor{red}{X Treasure here}} \end{picture} \end{center} The red X will be precisely a quarter of the ‘\textwidth’ from the left margin, and ‘0.35\textwidth’ up from the bottom of the picture. Another example of this usage is to put similar code in the page header to get repeat material on each of a document’s pages. 8.19.1 ‘\put’ ------------- Synopsis: \put(XCOORD,YCOORD){CONTENT} Place CONTENT at the coordinate (XCOORD,YCOORD). See the discussion of coordinates and ‘\unitlength’ in *note picture::. The CONTENT is processed in LR mode (*note Modes::) so it cannot contain line breaks. This includes the text into the ‘picture’. \put(4.5,2.5){Apply the \textit{unpoke} move} The reference point, the location (4.5,2.5), is the lower left of the text, at the bottom left of the ‘A’. 8.19.2 ‘\multiput’ ------------------ Synopsis: \multiput(X,Y)(DELTA_X,DELTA_Y){NUM-COPIES}{OBJ} Copy OBJ a total of NUM-COPIES times, with an increment of DELTA_X,DELTA_Y. The OBJ first appears at position (x,y), then at (x+\delta_x,y+\delta_y), and so on. This draws a simple grid with every fifth line in bold (see also *note \graphpaper::). \begin{picture}(10,10) \linethickness{0.05mm} \multiput(0,0)(1,0){10}{\line(0,1){10}} \multiput(0,0)(0,1){10}{\line(1,0){10}} \linethickness{0.5mm} \multiput(0,0)(5,0){3}{\line(0,1){10}} \multiput(0,0)(0,5){3}{\line(1,0){10}} \end{picture} 8.19.3 ‘\qbezier’ ----------------- Synopsis: \qbezier(X1,Y1)(X2,Y2)(X3,Y3) \qbezier[NUM](X1,Y1)(X2,Y2)(X3,Y3) Draw a quadratic Bezier curve whose control points are given by the three required arguments ‘(X1,Y1)’, ‘(X2,Y2)’, and ‘(X3,Y3)’. That is, the curve runs from (X1,Y1) to (X3,Y3), is quadratic, and is such that the tangent line at (X1,Y1) passes through (X2,Y2), as does the tangent line at (X3,Y3). This draws a curve from the coordinate (1,1) to (1,0). \qbezier(1,1)(1.25,0.75)(1,0) The curve’s tangent line at (1,1) contains (1.25,0.75), as does the curve’s tangent line at (1,0). The optional argument NUM gives the number of calculated intermediate points. The default is to draw a smooth curve whose maximum number of points is ‘\qbeziermax’ (change this value with ‘\renewcommand’). This draws a rectangle with a wavy top, using ‘\qbezier’ for that curve. \begin{picture}(8,4) \put(0,0){\vector(1,0){8}} % x axis \put(0,0){\vector(0,1){4}} % y axis \put(2,0){\line(0,1){3}} % left side \put(4,0){\line(0,1){3.5}} % right side \qbezier(2,3)(2.5,2.9)(3,3.25) \qbezier(3,3.25)(3.5,3.6)(4,3.5) \thicklines % below here, lines are twice as thick \put(2,3){\line(4,1){2}} \put(4.5,2.5){\framebox{Trapezoidal Rule}} \end{picture} 8.19.4 ‘\graphpaper’ -------------------- Synopsis: \graphpaper(X_INIT,Y_INIT)(X_DIMEN,Y_DIMEN) \graphpaper[SPACING](X_INIT,Y_INIT)(X_DIMEN,Y_DIMEN) Draw a coordinate grid. Requires the ‘graphpap’ package. The grid’s origin is ‘(X_INIT,Y_INIT)’. Grid lines come every SPACING units (the default is 10). The grid extends X_DIMEN units to the right and Y_DIMEN units up. All arguments must be positive integers. This make a grid with seven vertical lines and eleven horizontal lines. \usepackage{graphpap} % in preamble ... \begin{picture}(6,20) % in document body \graphpaper[2](0,0)(12,20) \end{picture} The lines are numbered every ten units. 8.19.5 ‘\line’ -------------- Synopsis: \line(X_RUN,Y_RISE){TRAVEL} Draw a line. It slopes such that it vertically rises Y_RISE for every horizontal X_RUN. The TRAVEL is the total horizontal change—it is not the length of the vector, it is the change in x. In the special case of vertical lines, where (X_RUN,Y_RISE)=(0,1), the TRAVEL gives the change in y. This draws a line starting at coordinates (1,3). \put(1,3){\line(2,5){4}} For every over 2, this line will go up 5. Because TRAVEL specifies that this goes over 4, it must go up 10. Thus its endpoint is (1,3)+(4,10)=(5,13). In particular, note that TRAVEL=4 is not the length of the line, it is the change in x. The arguments X_RUN and Y_RISE are integers that can be positive, negative, or zero. (If both are 0 then LaTeX treats the second as 1.) With ‘\put(X_INIT,Y_INIT){\line(X_RUN,Y_RISE){TRAVEL}}’, if X_RUN is negative then the line’s ending point has a first coordinate that is less than X_INIT. If Y_RISE is negative then the line’s ending point has a second coordinate that is less than Y_INIT. If TRAVEL is negative then you get ‘LaTeX Error: Bad \line or \vector argument.’ Standard LaTeX can only draw lines with a limited range of slopes because these lines are made by putting together line segments from pre-made fonts. The two numbers X_RUN and Y_RISE must have integer values from −6 through 6. Also, they must be relatively prime, so that (X_RUN,Y_RISE) can be (2,1) but not (4,2) (if you choose the latter then instead of lines you get sequences of arrowheads; the solution is to switch to the former). To get lines of arbitrary slope and plenty of other shapes in a system like ‘picture’, see the package ‘pict2e’ (). Another solution is to use a full-featured graphics system such as TikZ, PSTricks, MetaPost, or Asymptote. 8.19.6 ‘\linethickness’ ----------------------- Synopsis: \linethickness{DIM} Declares the thickness of subsequent horizontal and vertical lines in a picture to be DIM, which must be a positive length (*note Lengths::). It differs from ‘\thinlines’ and ‘\thicklines’ in that it does not affect the thickness of slanted lines, circles, or ovals (*note \oval::). 8.19.7 ‘\thinlines’ ------------------- Declaration to set the thickness of subsequent lines, circles, and ovals in a picture environment to be 0.4pt. This is the default thickness, so this command is unnecessary unless the thickness has been changed with either *note \linethickness:: or *note \thicklines::. 8.19.8 ‘\thicklines’ -------------------- Declaration to set the thickness of subsequent lines, circles, and ovals in a picture environment to be 0.8pt. See also *note \linethickness:: and *note \thinlines::. This command is illustrated in the Trapezoidal Rule example of *note \qbezier::. 8.19.9 ‘\circle’ ---------------- Synopsis: \circle{DIAMETER} \circle*{DIAMETER} Produces a circle with a diameter as close as possible to the specified one. The ‘*’ form produces a filled-in circle. This draws a circle of radius 6, centered at ‘(5,7)’. \put(5,7){\circle{6}} The available radii for ‘\circle’ are, in points, the even numbers from 2 to 20, inclusive. For ‘\circle*’ they are all the integers from 1 to 15. 8.19.10 ‘\oval’ --------------- Synopsis: \oval(WIDTH,HEIGHT) \oval(WIDTH,HEIGHT)[PORTION] Produce a rectangle with rounded corners, hereinafter referred to as an “oval”. The optional argument PORTION allows you to produce only half or a quarter of the oval. For half an oval take PORTION to be one of these. ‘t’ top half ‘b’ bottom half ‘r’ right half ‘l’ left half Produce only one quarter of the oval by setting PORTION to ‘tr’, ‘br’, ‘bl’, or ‘tl’. This draws the top half of an oval that is 3 wide and 7 tall. \put(5,7){\oval(3,7)[t]} The (5,7) is the center of the entire oval, not just the center of the top half. These shapes are not ellipses. They are rectangles whose corners are made with quarter circles. These circles have a maximum radius of 20pt (*note \circle:: for the sizes). Thus large ovals are just frames with a small amount of corner rounding. 8.19.11 ‘\shortstack’ --------------------- Synopsis: \shortstack[POSITION]{LINE 1 \\ ... } Produce a vertical stack of objects. This labels the y axis by writing the word ‘y’ above the word ‘axis’. \setlength{\unitlength}{1cm} \begin{picture}(5,2.5)(-0.75,0) \put(0,0){\vector(1,0){4}} % x axis \put(0,0){\vector(0,1){2}} % y \put(-0.2,2){\makebox(0,0)[r]{\shortstack[r]{$y$\\ axis}}} \end{picture} For a short stack, the reference point is the lower left of the stack. In the above example the ‘\makebox’ (*note \mbox & \makebox::) puts the stack flush right in a zero width box so in total the short stack sits slightly to the left of the y axis. The valid positions are: ‘r’ Make objects flush right ‘l’ Make objects flush left ‘c’ Center objects (default) Separate objects into lines with ‘\\’. These stacks are short in that, unlike in a ‘tabular’ or ‘array’ environment, here the rows are not spaced out to be of even baseline skips. Thus, in ‘\shortstack{X\\o\\o\\X}’ the first and last rows are taller than the middle two, and therefore the baseline skip between the two middle rows is smaller than that between the third and last row. You can adjust row heights and depths either by putting in the usual interline spacing with ‘\shortstack{X\\ \strut o\\o\\X}’ (*note \strut::), or explicitly, via an zero-width box ‘\shortstack{X \\ \rule{0pt}{12pt} o\\o\\X}’ or by using ‘\\’’s optional argument ‘\shortstack{X\\[2pt] o\\o\\X}’. The ‘\shortstack’ command is also available outside the ‘picture’ environment. 8.19.12 ‘\vector’ ----------------- Synopsis: \vector(X_RUN,Y_RISE){TRAVEL} Draw a line ending in an arrow. The slope of that line is: it vertically rises Y_RISE for every horizontal X_RUN. The TRAVEL is the total horizontal change—it is not the length of the vector, it is the change in x. In the special case of vertical vectors, if (X_RUN,Y_RISE)=(0,1), then TRAVEL gives the change in y. For an example see *note picture::. For elaboration on X_RUN and Y_RISE see *note \line::. As there, the values of X_RUN and Y_RISE are limited. For ‘\vector’ you must chooses integers between −4 and 4, inclusive. Also, the two you choose must be relatively prime. Thus, ‘\vector(2,1){4}’ is acceptable but ‘\vector(4,2){4}’ is not (if you use the latter then you get a sequence of arrowheads). 8.19.13 ‘\makebox’ (picture) ---------------------------- Synopsis: \makebox(REC-WIDTH,REC-HEIGHT){TEXT} \makebox(REC-WIDTH,REC-HEIGHT)[POSITION]{TEXT} Make a box to hold TEXT. This command fits with the ‘picture’ environment, although you can use it outside of there, because REC-WIDTH and REC-HEIGHT are numbers specifying distances in terms of the ‘\unitlength’ (*note picture::). This command is similar to the normal ‘\makebox’ command (*note \mbox & \makebox::) except here that you must specify the width and height. This command is fragile (*note \protect::). This makes a box of length 3.5 times ‘\unitlength’ and height 4 times ‘\unitlength’. \put(1,2){\makebox(3.5,4){...}} The optional argument ‘POSITION’ specifies where in the box the TEXT appears. The default is to center it, both horizontally and vertically. To place it somewhere else, use a string with one or two of these letters. ‘t’ Puts TEXT the top of the box. ‘b’ Put TEXT at the bottom. ‘l’ Put TEXT on the left. ‘r’ Put TEXT on the right. 8.19.14 ‘\framebox’ (picture) ----------------------------- Synopsis: \framebox(REC-WIDTH,REC-HEIGHT){TEXT} \framebox(REC-WIDTH,REC-HEIGHT)[POSITION]{TEXT} This is the same as *note \makebox (picture):: except that it puts a frame around the outside of the box that it creates. The reference point is the bottom left corner of the frame. This command fits with the ‘picture’ environment, although you can use it outside of there, because lengths are numbers specifying the distance in terms of the ‘\unitlength’ (*note picture::). This command is fragile (*note \protect::). This example creates a frame 2.5 inches by 3 inches and puts the text in the center. \setlength{\unitlength}{1in} \framebox(2.5,3){test text} The required arguments are that the rectangle has overall width RECT-WIDTH units and height RECT-HEIGHT units. The optional argument POSITION specifies the position of TEXT; see *note \makebox (picture):: for the values that it can take. The rule has thickness ‘\fboxrule’ and there is a blank space ‘\fboxsep’ between the frame and the contents of the box. For this command, you must specify the WIDTH and HEIGHT. If you want to just put a frame around some contents whose dimension is determined in some other way then either use ‘\fbox’ (*note \fbox & \framebox::) or ‘\frame’ (*note \frame::). 8.19.15 ‘\frame’ ---------------- Synopsis: \frame{CONTENTS} Puts a rectangular frame around CONTENTS. The reference point is the bottom left corner of the frame. In contrast to ‘\framebox’ (*note \framebox (picture)::), this command puts no extra space between the frame and the object. It is fragile (*note \protect::). 8.19.16 ‘\dashbox’ ------------------ Synopsis: \dashbox{DASH-LEN}(RECT-WIDTH,RECT-HEIGHT){TEXT} \dashbox{DASH-LEN}(RECT-WIDTH,RECT-HEIGHT)[POSITION]{TEXT} Create a dashed rectangle around TEXT. This command fits with the ‘picture’ environment, although you can use it outside of there, because lengths are numbers specifying the distance in terms of the ‘\unitlength’ (*note picture::). The required arguments are: dashes are DASH-LEN units long, with the same length gap, and the rectangle has overall width RECT-WIDTH units and height RECT-HEIGHT units. The optional argument POSITION specifies the position of TEXT; see *note \makebox (picture):: for the values that it can take. This shows that you can use non-integer value for DASH-LEN. \put(0,0){\dashbox{0.1}(5,0.5){My hovercraft is full of eels.}} Each dash will be ‘0.1\unitlength’ long, the box’s width is ‘5\unitlength’ and its height is ‘0.5\unitlength’. As in that example, a dashed box looks best when RECT-WIDTH and RECT-HEIGHT are multiples of the DASH-LEN. 8.20 ‘quotation’ & ‘quote’ ========================== Synopsis: \begin{quotation} TEXT \end{quotation} or \begin{quote} TEXT \end{quote} Include a quotation. Both environments indent margins on both sides by ‘\leftmargin’ and the text is right-justified. They differ in how they treat paragraphs. In the ‘quotation’ environment, paragraphs are indented by 1.5em and the space between paragraphs is small, ‘0pt plus 1pt’. In the ‘quote’ environment, paragraphs are not indented and there is vertical space between paragraphs (it is the rubber length ‘\parsep’). \begin{quotation} \small\it Four score and seven years ago ... shall not perish from the earth. \hspace{1em plus 1fill}---Abraham Lincoln \end{quotation} 8.21 ‘tabbing’ ============== Synopsis: \begin{tabbing} ROW1COL1 \= ROW1COL2 ... \\ ROW2COL1 \> ROW2COL2 ... \\ ... \end{tabbing} Align text in columns, by setting tab stops and tabbing to them much as was done on a typewriter. This is less often used than the environments ‘tabular’ (*note tabular::) or ‘array’ (*note array::) because in those the width of each column need not be constant and need not be known in advance. This example has a first line where the tab stops are set to explicit widths, ended by a ‘\kill’ command (which is described below): \begin{tabbing} \hspace{1.2in}\=\hspace{1in}\=\kill Ship \>Guns \>Year \\ \textit{Sophie} \>14 \>1800 \\ \textit{Polychrest} \>24 \>1803 \\ \textit{Lively} \>38 \>1804 \\ \textit{Surprise} \>28 \>1805 \\ \end{tabbing} Both the ‘tabbing’ environment and the more widely-used ‘tabular’ environment put text in columns. The most important distinction is that in ‘tabular’ the width of columns is determined automatically by LaTeX, while in ‘tabbing’ the user sets the tab stops. Another distinction is that ‘tabular’ generates a box, but ‘tabbing’ can be broken across pages. Finally, while ‘tabular’ can be used in any mode, ‘tabbing’ can be used only in paragraph mode and it always starts a new paragraph, without indentation. Moreover, as shown in the example above, there is no need to use the starred form of the ‘\hspace’ command at the beginning of a tabbed row. The right margin of the ‘tabbing’ environment is the end of line, so that the width of the environment is ‘\linewidth’. The ‘tabbing’ environment contains a sequence of “tabbed rows”. The first tabbed row begins immediately after ‘\begin{tabbing}’ and each row ends with ‘\\’ or ‘\kill’. The last row may omit the ‘\\’ and end with just ‘\end{tabbing}’. At any point the ‘tabbing’ environment has a “current tab stop pattern”, a sequence of N > 0 tab stops, numbered 0, 1, etc. These create N corresponding columns. Tab stop 0 is always the left margin, defined by the enclosing environment. Tab stop number I is set if it is assigned a horizontal position on the page. Tab stop number I can only be set if all the stops 0, ..., i-1 have already been set; normally later stops are to the right of earlier ones. By default any text typeset in a ‘tabbing’ environment is typeset ragged right and left-aligned on the current tab stop. Typesetting is done in LR mode (*note Modes::). The following commands can be used inside a ‘tabbing’ environment. They are all fragile (*note \protect::). ‘\\ (tabbing)’ End a tabbed line and typeset it. ‘\= (tabbing)’ Sets a tab stop at the current position. ‘\> (tabbing)’ Advances to the next tab stop. ‘\<’ Put following text to the left of the local margin (without changing the margin). Can only be used at the start of the line. ‘\+’ Moves the left margin of the next and all the following commands one tab stop to the right, beginning tabbed line if necessary. ‘\-’ Moves the left margin of the next and all the following commands one tab stop to the left, beginning tabbed line if necessary. ‘\' (tabbing)’ Moves everything that you have typed so far in the current column, i.e., everything from the most recent ‘\>’, ‘\<’, ‘\'’, ‘\\’, or ‘\kill’ command, to the previous column and aligned to the right, flush against the current column’s tab stop. ‘\` (tabbing)’ Allows you to put text flush right against any tab stop, including tab stop 0. However, it can’t move text to the right of the last column because there’s no tab stop there. The ‘\`’ command moves all the text that follows it, up to the ‘\\’ or ‘\end{tabbing}’ command that ends the line, to the right margin of the ‘tabbing’ environment. There must be no ‘\>’ or ‘\'’ command between the ‘\`’ and the ‘\\’ or ‘\end{tabbing}’ command that ends the line. ‘\a (tabbing)’ In a ‘tabbing’ environment, the commands ‘\=’, ‘\'’ and ‘\`’ do not produce accents as usual (*note Accents::). Instead, use the commands ‘\a=’, ‘\a'’ and ‘\a`’. ‘\kill’ Sets tab stops without producing text. Works just like ‘\\’ except that it throws away the current line instead of producing output for it. Any ‘\=’, ‘\+’ or ‘\-’ commands in that line remain in effect. ‘\poptabs’ Restores the tab stop positions saved by the last ‘\pushtabs’. ‘\pushtabs’ Saves all current tab stop positions. Useful for temporarily changing tab stop positions in the middle of a ‘tabbing’ environment. ‘\tabbingsep’ Distance of the text moved by ‘\'’ to left of current tab stop. This example typesets a Pascal function: \begin{tabbing} function \= fact(n : integer) : integer;\\ \> begin \= \+ \\ \> if \= n > 1 then \+ \\ fact := n * fact(n-1) \- \\ else \+ \\ fact := 1; \-\- \\ end;\\ \end{tabbing} The output looks like this. function fact(n : integer) : integer; begin if n > 1 then fact := n * fact(n-1); else fact := 1; end; This example is just for illustration of the environment. To actually typeset computer code in typewriter like this, a verbatim environment (*note verbatim::) would normally be best. For pretty-printed code, there are quite a few packages, including ‘algorithm2e’, ‘fancyvrb’, ‘listings’, and ‘minted’. 8.22 ‘table’ ============ Synopsis: \begin{table}[PLACEMENT] TABLE BODY \caption[LOFTITLE]{TITLE} % optional \label{LABEL} % also optional \end{table} A class of floats (*note Floats::). They cannot be split across pages and so they are not typeset in sequence with the normal text but instead are floated to a convenient place, such as the top of a following page. This example ‘table’ environment contains a ‘tabular’ \begin{table} \centering\small \begin{tabular}{ll} \multicolumn{1}{c}{\textit{Author}} &\multicolumn{1}{c}{\textit{Piece}} \\ \hline Bach &Cello Suite Number 1 \\ Beethoven &Cello Sonata Number 3 \\ Brahms &Cello Sonata Number 1 \end{tabular} \caption{Top cello pieces} \label{tab:cello} \end{table} but you can put many different kinds of content in a ‘table’: the TABLE BODY may contain text, LaTeX commands, graphics, etc. It is typeset in a ‘parbox’ of width ‘\textwidth’. For the possible values of PLACEMENT and their effect on the float placement algorithm, see *note Floats::. The label is optional; it is used for cross references (*note Cross references::). The ‘\caption’ command is also optional. It specifies caption text TITLE for the table (*note \caption::). By default it is numbered. If its optional LOTTITLE is present then that text is used in the list of tables instead of TITLE (*note Table of contents etc.::). In this example the table and caption will float to the bottom of a page, unless it is pushed to a float page at the end. \begin{table}[b] \centering \begin{tabular}{r|p{2in}} \hline One &The loneliest number \\ Two &Can be as sad as one. It's the loneliest number since the number one. \end{tabular} \caption{Cardinal virtues} \label{tab:CardinalVirtues} \end{table} 8.23 ‘tabular’ ============== Synopsis: \begin{tabular}[POS]{COLS} COLUMN 1 ENTRY &COLUMN 2 ENTRY ... &COLUMN N ENTRY \\ ... \end{tabular} or \begin{tabular*}{WIDTH}[POS]{COLS} COLUMN 1 ENTRY &COLUMN 2 ENTRY ... &COLUMN N ENTRY \\ ... \end{tabular*} Produce a table, a box consisting of a sequence of horizontal rows. Each row consists of items that are aligned vertically in columns. This illustrates many of the features. \begin{tabular}{l|l} \textit{Player name} &\textit{Career home runs} \\ \hline Hank Aaron &755 \\ Babe Ruth &714 \end{tabular} The output will have two left-aligned columns with a vertical bar between them. This is specified in ‘tabular’’s argument ‘{l|l}’. Put the entries into different columns by separating them with an ampersand, ‘&’. The end of each row is marked with a double backslash, ‘\\’. Put a horizontal rule below a row, after a double backslash, with ‘\hline’. After the last row the ‘\\’ is optional, unless an ‘\hline’ command follows to put a rule below the table. The required and optional arguments to ‘tabular’ consist of: POS Optional. Specifies the table’s vertical position. The default is to align the table so its vertical center matches the baseline of the surrounding text. There are two other possible alignments: ‘t’ aligns the table so its top row matches the baseline of the surrounding text, and ‘b’ aligns on the bottom row. This only has an effect if there is other text. In the common case of a ‘tabular’ alone in a ‘center’ environment this option makes no difference. COLS Required. Specifies the formatting of columns. It consists of a sequence of the following specifiers, corresponding to the types of column and intercolumn material. ‘l’ A column of left-aligned items. ‘r’ A column of right-aligned items. ‘c’ A column of centered items. ‘|’ A vertical line the full height and depth of the environment. ‘@{TEXT OR SPACE}’ Insert TEXT OR SPACE at this location in every row. The TEXT OR SPACE material is typeset in LR mode. This text is fragile (*note \protect::). If between two column specifiers there is no @-expression then LaTeX’s ‘book’, ‘article’, and ‘report’ classes will put on either side of each column a space of width ‘\tabcolsep’, which by default is 6pt. That is, by default adjacent columns are separated by 12pt (so ‘\tabcolsep’ is misleadingly named since it is only half of the separation between tabular columns). In addition, a space of ‘\tabcolsep’ also comes before the first column and after the final column, unless you put a ‘@{...}’ there. If you override the default and use an @-expression then LaTeX does not insert ‘\tabcolsep’ so you must insert any desired space yourself, as in ‘@{\hspace{1em}}’. An empty expression ‘@{}’ will eliminate the space. In particular, sometimes you want to eliminate the space before the first column or after the last one, as in the example below where the tabular lines need to lie on the left margin. \begin{flushleft} \begin{tabular}{@{}l} ... \end{tabular} \end{flushleft} The next example shows text, a decimal point between the columns, arranged so the numbers in the table are aligned on it. \begin{tabular}{r@{$.$}l} $3$ &$14$ \\ $9$ &$80665$ \end{tabular} An ‘\extracolsep{WD}’ command in an @-expression causes an extra space of width WD to appear to the left of all subsequent columns, until countermanded by another ‘\extracolsep’. Unlike ordinary intercolumn space, this extra space is not suppressed by an @-expression. An ‘\extracolsep’ command can be used only in an @-expression in the ‘cols’ argument. Below, LaTeX inserts the right amount of intercolumn space to make the entire table 4 inches wide. \begin{tabular*}{4in}{l@{\extracolsep{\fill}}l} Seven times down, eight times up \ldots &such is life! \end{tabular*} To insert commands that are automatically executed before a given column, load the ‘array’ package and use the ‘>{...}’ specifier. ‘p{WD}’ Each item in the column is typeset in a parbox of width WD, as if it were the argument of a ‘\parbox[t]{wd}{...}’ command. A line break double backslash ‘\\’ may not appear in the item, except inside an environment like ‘minipage’, ‘array’, or ‘tabular’, or inside an explicit ‘\parbox’, or in the scope of a ‘\centering’, ‘\raggedright’, or ‘\raggedleft’ declaration (when used in a ‘p’-column element these declarations must appear inside braces, as with ‘{\centering .. \\ ..}’). Otherwise LaTeX will misinterpret the double backslash as ending the tabular row. Instead, to get a line break in there use ‘\newline’ (*note \newline::). ‘*{NUM}{COLS}’ Equivalent to NUM copies of COLS, where NUM is a positive integer and COLS is a list of specifiers. Thus the specifier ‘\begin{tabular}{|*{3}{l|r}|}’ is equivalent to the specifier ‘\begin{tabular}{|l|rl|rl|r|}’. Note that COLS may contain another ‘*’-expression. WIDTH Required for ‘tabular*’, not allowed for ‘tabular’. Specifies the width of the ‘tabular*’ environment. The space between columns should be rubber, as with ‘@{\extracolsep{\fill}}’, to allow the table to stretch or shrink to make the specified width, or else you are likely to get the ‘Underfull \hbox (badness 10000) in alignment ...’ warning. Parameters that control formatting: ‘\arrayrulewidth’ A length that is the thickness of the rule created by ‘|’, ‘\hline’, and ‘\vline’ in the ‘tabular’ and ‘array’ environments. The default is ‘.4pt’. Change it as in ‘\setlength{\arrayrulewidth}{0.8pt}’. ‘\arraystretch’ A factor by which the spacing between rows in the ‘tabular’ and ‘array’ environments is multiplied. The default is ‘1’, for no scaling. Change it as ‘\renewcommand{\arraystretch}{1.2}’. ‘\doublerulesep’ A length that is the distance between the vertical rules produced by the ‘||’ specifier. The default is ‘2pt’. ‘\tabcolsep’ A length that is half of the space between columns. The default is ‘6pt’. Change it with ‘\setlength’. The following commands can be used inside the body of a ‘tabular’ environment, the first two inside an entry and the second two between lines: 8.23.1 ‘\multicolumn’ --------------------- Synopsis: \multicolumn{NUMCOLS}{COLS}{TEXT} Make an ‘array’ or ‘tabular’ entry that spans several columns. The first argument NUMCOLS gives the number of columns to span. The second argument COLS specifies the formatting of the entry, with ‘c’ for centered, ‘l’ for flush left, or ‘r’ for flush right. The third argument TEXT gives the contents of that entry. In this example, in the first row, the second and third columns are spanned by the single heading ‘Name’. \begin{tabular}{lccl} \textit{ID} &\multicolumn{2}{c}{\textit{Name}} &\textit{Age} \\ \hline 978-0-393-03701-2 &O'Brian &Patrick &55 \\ ... \end{tabular} What counts as a column is: the column format specifier for the ‘array’ or ‘tabular’ environment is broken into parts, where each part (except the first) begins with ‘l’, ‘c’, ‘r’, or ‘p’. So from ‘\begin{tabular}{|r|ccp{1.5in}|}’ the parts are ‘|r|’, ‘c’, ‘c’, and ‘p{1.5in}|’. The COLS argument overrides the ‘array’ or ‘tabular’ environment’s intercolumn area default adjoining this multicolumn entry. To affect that area, this argument can contain vertical bars ‘|’ indicating the placement of vertical rules, and ‘@{...}’ expressions. Thus if COLS is ‘|c|’ then this multicolumn entry will be centered and a vertical rule will come in the intercolumn area before it and after it. This table details the exact behavior. \begin{tabular}{|cc|c|c|} \multicolumn{1}{r}{w} % entry one &\multicolumn{1}{|r|}{x} % entry two &\multicolumn{1}{|r}{y} % entry three &z % entry four \end{tabular} Before the first entry the output will not have a vertical rule because the ‘\multicolumn’ has the COLS specifier ‘r’ with no initial vertical bar. Between entry one and entry two there will be a vertical rule; although the first COLS does not have an ending vertical bar, the second COLS does have a starting one. Between entry two and entry three there is a single vertical rule; despite that the COLS in both of the surrounding ‘multicolumn’’s call for a vertical rule, you only get one rule. Between entry three and entry four there is no vertical rule; the default calls for one but the COLS in the entry three ‘\multicolumn’ leaves it out, and that takes precedence. Finally, following entry four there is a vertical rule because of the default. The number of spanned columns NUMCOLS can be 1. Besides giving the ability to change the horizontal alignment, this also is useful to override for one row the ‘tabular’ definition’s default intercolumn area specification, including the placement of vertical rules. In the example below, in the ‘tabular’ definition the first column is specified to default to left justified but in the first row the entry is centered with ‘\multicolumn{1}{c}{\textsc{Period}}’. Also in the first row, the second and third columns are spanned by a single entry with ‘\multicolumn{2}{c}{\textsc{Span}}’, overriding the specification to center those two columns on the page range en-dash. \begin{tabular}{l|r@{--}l} \multicolumn{1}{c}{\textsc{Period}} &\multicolumn{2}{c}{\textsc{Span}} \\ \hline Baroque &1600 &1760 \\ Classical &1730 &1820 \\ Romantic &1780 &1910 \\ Impressionistic &1875 &1925 \end{tabular} Although the ‘tabular’ specification by default puts a vertical rule between the first and second columns, no such vertical rule appears in the first row here. That’s because there is no vertical bar in the COLS part of the first row’s first ‘\multicolumn’ command. 8.23.2 ‘\vline’ --------------- Draw a vertical line in a ‘tabular’ or ‘array’ environment extending the full height and depth of an entry’s row. Can also be used in an @-expression, although its synonym vertical bar ‘|’ is more common. This command is rarely used in the body of a table; typically a table’s vertical lines are specified in ‘tabular’’s COLS argument and overridden as needed with ‘\multicolumn’ (*note tabular::). The example below illustrates some pitfalls. In the first row’s second entry the ‘\hfill’ moves the ‘\vline’ to the left edge of the cell. But that is different than putting it halfway between the two columns, so between the first and second columns there are two vertical rules, with the one from the ‘{c|cc}’ specifier coming before the one produced by the ‘\vline\hfill’. In contrast, the first row’s third entry shows the usual way to put a vertical bar between two columns. In the second row, the ‘ghi’ is the widest entry in its column so in the ‘\vline\hfill’ the ‘\hfill’ has no effect and the vertical line in that entry appears immediately next to the ‘g’, with no whitespace. \begin{tabular}{c|cc} x &\vline\hfill y &\multicolumn{1}{|r}{z} \\ % row 1 abc &def &\vline\hfill ghi % row 2 \end{tabular} 8.23.3 ‘\cline’ --------------- Synopsis: \cline{I-J} In an ‘array’ or ‘tabular’ environment, draw a horizontal rule beginning in column I and ending in column J. The dash, ‘-’, must appear in the mandatory argument. To span a single column use the number twice, as with ‘\cline{2-2}’. This example puts two horizontal lines between the first and second rows, one line in the first column only, and the other spanning the third and fourth columns. The two lines are side-by-side, at the same height. \begin{tabular}{llrr} a &b &c &d \\ \cline{1-1} \cline{3-4} e &f &g &h \end{tabular} 8.23.4 ‘\hline’ --------------- Draw a horizontal line the width of the enclosing ‘tabular’ or ‘array’ environment. It’s most commonly used to draw a line at the top, bottom, and between the rows of a table. In this example the top of the table has two horizontal rules, one above the other, that span both columns. The bottom of the table has a single rule spanning both columns. Because of the ‘\hline’, the ‘tabular’ second row’s line ending double backslash ‘\\’ is required. \begin{tabular}{ll} \hline\hline Baseball &Red Sox \\ Basketball &Celtics \\ \hline \end{tabular} 8.24 ‘thebibliography’ ====================== Synopsis: \begin{thebibliography}{WIDEST-LABEL} \bibitem[LABEL]{CITE_KEY} ... \end{thebibliography} Produce a bibliography or reference list. There are two ways to produce bibliographic lists. This environment is suitable when you have only a few references and can maintain the list by hand. *Note Using BibTeX::, for a more sophisticated approach. This shows the environment with two entries. This work is based on \cite{latexdps}. Together they are \cite{latexdps, texbook}. ... \begin{thebibliography}{9} \bibitem{latexdps} Leslie Lamport. \textit{\LaTeX{}: a document preparation system}. Addison-Wesley, Reading, Massachusetts, 1993. \bibitem{texbook} Donald Ervin Knuth. \textit{The \TeX book}. Addison-Wesley, Reading, Massachusetts, 1983. \end{thebibliography} This styles the first reference as ‘[1] Leslie ...’, and so that ‘... based on \cite{latexdps}’ produces the matching ‘... based on [1]’. The second ‘\cite’ produces ‘[1, 2]’. You must compile the document twice to resolve these references. The mandatory argument WIDEST-LABEL is text that, when typeset, is as wide as the widest item label produced by the ‘\bibitem’ commands. The tradition is to use ‘9’ for bibliographies with less than 10 references, ‘99’ for ones with less than 100, etc. The bibliographic list is headed by a title such as ‘Bibliography’. To change it there are two cases. In the ‘book’ and ‘report’ classes, where the top level sectioning is ‘\chapter’ and the default title is ‘Bibliography’, that title is in the macro ‘\bibname’. For ‘article’, where the class’s top level sectioning is ‘\section’ and the default is ‘References’, the title is in macro ‘\refname’. Change it by redefining the command, as with ‘\renewcommand{\refname}{Cited references}’, after ‘\begin{document}’. Language support packages such as ‘babel’ will automatically redefine ‘\refname’ or ‘\bibname’ to fit the selected language. *Note list::, for the list layout control parameters. 8.24.1 ‘\bibitem’ ----------------- Synopsis: \bibitem{CITE_KEY} or \bibitem[LABEL]{CITE_KEY} Generate an entry labeled by default by a number generated using the ‘enumi’ counter. The “citation key” CITE_KEY can be any string of letters, numbers, and punctuation symbols (but not comma). *Note thebibliography::, for an example. When provided, the optional LABEL becomes the entry label and the ‘enumi’ counter is not incremented. With this \begin{thebibliography} \bibitem[Lamport 1993]{latexdps} Leslie Lamport. \textit{\LaTeX{}: a document preparation system}. Addison-Wesley, Reading, Massachusetts, 1993. \bibitem{texbook} Donald Ervin Knuth. \textit{The \TeX book}. Addison-Wesley, Reading, Massachusetts, 1983. \end{thebibliography} the first entry will be styled as ‘[Lamport 1993] Leslie ...’ (The amount of horizontal space that LaTeX leaves for the label depends on the WIDEST-LABEL argument of the ‘thebibliography’ environment; see *note thebibliography::.) Similarly, ‘... based on \cite{latexdps}’ will produce ‘... based on [Lamport 1994]’. If you mix ‘\bibitem’ entries having a LABEL with those that do not then LaTeX will number the unlabelled ones sequentially. In the example above the ‘texbook’ entry will appear as ‘[1] Donald ...’, despite that it is the second entry. If you use the same CITE_KEY twice then you get ‘LaTeX Warning: There were multiply-defined labels’. Under the hood, LaTeX remembers the CITE_KEY and LABEL information because ‘\bibitem’ writes it to the auxiliary file ‘JOBNAME.aux’ (*note Jobname::). For instance, the above example causes the two ‘\bibcite{latexdps}{Lamport, 1993}’ and ‘\bibcite{texbook}{1}’ to appear in that file. The ‘.aux’ file is read by the ‘\begin{document}’ command and then the information is available for ‘\cite’ commands. This explains why you need to run LaTeX twice to resolve references: once to write it out and once to read it in. Because of this two-pass algorithm, when you add a ‘\bibitem’ or change its CITE_KEY you may get ‘LaTeX Warning: Label(s) may have changed. Rerun to get cross-references right’. Fix it by recompiling. 8.24.2 ‘\cite’ -------------- Synopsis: \cite{KEYS} or \cite[SUBCITE]{KEYS} Generate as output a citation to the references associated with KEYS. The mandatory KEYS is a citation key, or a comma-separated list of citation keys (*note \bibitem::). This The ultimate source is \cite{texbook}. ... \begin{thebibliography} \bibitem{texbook} Donald Ervin Knuth. \textit{The \TeX book}. Addison-Wesley, Reading, Massachusetts, 1983. \end{thebibliography} produces output like ‘... source is [1]’. You can change the appearance of the citation and of the reference by using bibliography styles if you generate automatically the ‘thebibliography’ environment. More information in *note Using BibTeX::. The optional argument SUBCITE is appended to the citation. For example, ‘See 14.3 in \cite[p.~314]{texbook}’ might produce ‘See 14.3 in [1, p. 314]’. In addition to what appears in the output, ‘\cite’ writes information to the auxiliary file ‘JOBNAME.aux’ (*note Jobname::). For instance, ‘\cite{latexdps}’ writes ‘\citation{latexdps}’ to that file. This information is used by BibTeX to include in your reference list only those works that you have actually cited; see *note \nocite:: also. If KEYS is not in your bibliography information then you get ‘LaTeX Warning: There were undefined references’, and in the output the citation shows as a boldface question mark between square brackets. There are two possible causes. If you have mistyped something, as in ‘\cite{texbok}’ then you need to correct the spelling. On the other hand, if you have just added or modified the bibliographic information and so changed the ‘.aux’ file (*note \bibitem::) then the fix may be to run LaTeX again. 8.24.3 ‘\nocite’ ---------------- Synopsis: \nocite{KEYS} Produces no output but writes KEYS to the auxiliary file ‘JOBNAME.aux’ (*note Jobname::). The mandatory argument KEYS is a comma-separated list of one or more citation keys (*note \bibitem::). This information is used by BibTeX to include these works in your reference list even though you have not explicitly cited them (*note \cite::). 8.24.4 Using BibTeX ------------------- As described in ‘thebibliography’ (*note thebibliography::), a sophisticated approach to managing bibliographies is provided by the BibTeX program. This is only an introduction; see the full documentation on CTAN (*note CTAN::). With BibTeX, you don’t use the ‘thebibliography’ environment directly (*note thebibliography::). Instead, include these lines: \bibliographystyle{BIBSTYLE} \bibliography{BIBFILE1, BIBFILE2, ...} The BIBSTYLE refers to a file ‘BIBSTYLE.bst’, which defines how your citations will look. The standard BIBSTYLE’s distributed with BibTeX are: ‘alpha’ Labels are formed from name of author and year of publication. The bibliographic items are sorted alphabetically. ‘plain’ Labels are integers. Sort the bibliographic items alphabetically. ‘unsrt’ Like ‘plain’, but entries are in order of citation. ‘abbrv’ Like ‘plain’, but more compact labels. Many, many other BibTeX style files exist, tailored to the demands of various publications. See the CTAN topic . The ‘\bibliography’ command is what actually produces the bibliography. Its argument is a comma-separated list, referring to files named ‘BIBFILE1.bib’, ‘BIBFILE2.bib’, ... These contain your database in BibTeX format. This shows a typical couple of entries in that format. @book{texbook, title = {The {{\TeX}}book}, author = {D.E. Knuth}, isbn = {0201134489}, series = {Computers \& typesetting}, year = {1983}, publisher = {Addison-Wesley} } @book{sexbook, author = {W.H. Masters and V.E. Johnson}, title = {Human Sexual Response}, year = {1966}, publisher = {Bantam Books} } Only the bibliographic entries referred to via ‘\cite’ and ‘\nocite’ will be listed in the document’s bibliography. Thus you can keep all your sources together in one file, or a small number of files, and rely on BibTeX to include in this document only those that you used. With BibTeX, the KEYS argument to ‘\nocite’ can also be the single character ‘*’. This means to implicitly cite all entries from all given bibliographies. 8.24.4.1 BibTeX error messages .............................. If you forget to use ‘\bibliography’ or ‘\bibliographystyle’ in your document (or, less likely, any ‘\cite’ or ‘\nocite’ command), BibTeX will issue an error message. Because BibTeX can be used with any program, not just LaTeX, the error messages refer to the internal commands read by BibTeX (from the ‘.aux’ file), rather than the user-level commands described above. Here is a table showing internal commands mentioned in the BibTeX errors, and the corresponding user-level commands. ‘\bibdata’ ‘\bibliography’ ‘\bibstyle’ ‘\bibliographystyle’ ‘\citation’ ‘\cite’, ‘\nocite’ For example, if your document has no ‘\bibliographystyle’ command, BibTeX complains as follows: I found no \bibstyle command---while reading file DOCUMENT.aux 8.25 ‘theorem’ ============== Synopsis: \begin{theorem} THEOREM BODY \end{theorem} Produces ‘Theorem N’ in boldface followed by THEOREM BODY in italics. The numbering possibilities for N are described under ‘\newtheorem’ (*note \newtheorem::). \newtheorem{lem}{Lemma} % in preamble \newtheorem{thm}{Theorem} ... \begin{lem} % in document body text of lemma \end{lem} The next result follows immediately. \begin{thm}[Gauss] % put `Gauss' in parens after theorem head text of theorem \end{thm} Most new documents use the packages ‘amsthm’ and ‘amsmath’ from the American Mathematical Society. Among other things these packages include a large number of options for theorem environments, such as styling options. 8.26 ‘titlepage’ ================ Synopsis: \begin{titlepage} ... text and spacing ... \end{titlepage} Create a title page, a page with no printed page number or heading and with succeeding pages numbered starting with page one. In this example all formatting, including vertical spacing, is left to the author. \begin{titlepage} \vspace*{\stretch{1}} \begin{center} {\huge\bfseries Thesis \\[1ex] title} \\[6.5ex] {\large\bfseries Author name} \\ \vspace{4ex} Thesis submitted to \\[5pt] \textit{University name} \\[2cm] in partial fulfilment for the award of the degree of \\[2cm] \textsc{\Large Doctor of Philosophy} \\[2ex] \textsc{\large Mathematics} \\[12ex] \vfill Department of Mathematics \\ Address \\ \vfill \today \end{center} \vspace{\stretch{2}} \end{titlepage} To instead produce a standard title page without a ‘titlepage’ environment, use ‘\maketitle’ (*note \maketitle::). 8.27 ‘verbatim’ =============== Synopsis: \begin{verbatim} LITERAL-TEXT \end{verbatim} A paragraph-making environment in which LaTeX produces as output exactly what you type as input. For instance inside LITERAL-TEXT the backslash ‘\’ character does not start commands, it produces a printed ‘\’, and carriage returns and blanks are taken literally. The output appears in a monospaced typewriter-like font (‘\tt’). \begin{verbatim} Symbol swearing: %&$#?!. \end{verbatim} The only restriction on ‘literal-text’ is that it cannot include the string ‘\end{verbatim}’. You cannot use the verbatim environment in the argument to macros, for instance in the argument to a ‘\section’. This is not the same as commands being fragile (*note \protect::), instead it just cannot work, as the ‘verbatim’ environment changes the catcode regime before processing its contents, and restore it immediately afterward, nevertheless with a macro argument the content of the argument has already be converted to a token list along the catcode regime in effect when the macro was called. However, the ‘cprotect’ package can help with this. One common use of verbatim input is to typeset computer code. There are packages that are an improvement the ‘verbatim’ environment. For instance, one improvement is to allow the verbatim inclusion of external files, or parts of those files. Such packages include ‘listings’, and ‘minted’. A package that provides many more options for verbatim environments is ‘fancyvrb’. Another is ‘verbatimbox’. For a list of all the relevant packages, see CTAN (*note CTAN::). 8.27.1 ‘\verb’ -------------- Synopsis: \verb CHAR LITERAL-TEXT CHAR \verb* CHAR LITERAL-TEXT CHAR Typeset LITERAL-TEXT as it is input, including special characters and spaces, using the typewriter (‘\tt’) font. This example shows two different invocations of ‘\verb’. This is \verb!literally! the biggest pumpkin ever. And this is the best squash, \verb+literally!+ The first ‘\verb’ has its LITERAL-TEXT surrounded with exclamation point, ‘!’. The second instead uses plus, ‘+’, because the exclamation point is part of ‘literal-text’. The single-character delimiter CHAR surrounds LITERAL-TEXT—it must be the same character before and after. No spaces come between ‘\verb’ or ‘\verb*’ and CHAR, or between CHAR and LITERAL-TEXT, or between LITERAL-TEXT and the second occurrence of CHAR (the synopsis shows a space only to distinguish one component from the other). The delimiter must not appear in LITERAL-TEXT. The LITERAL-TEXT cannot include a line break. The ‘*’-form differs only in that spaces are printed with a visible space character. The output from this will include a visible space on both side of word ‘with’: The command's first argument is \verb*!filename with extension! and ... For typesetting Internet addresses, urls, the package ‘url’ is a better option than the ‘\verb’ command, since it allows line breaks. For computer code there are many packages with advantages over ‘\verb’. One is ‘listings’, another is ‘minted’. You cannot use ‘\verb’ in the argument to a macro, for instance in the argument to a ‘\section’. It is not a question of ‘\verb’ being fragile (*note \protect::), instead it just cannot work, as the ‘\verb’ command changes the catcode regime before reading its argument, and restore it immediately afterward, nevertheless with a macro argument the content of the argument has already be converted to a token list along the catcode regime in effect when the macro was called. However, the ‘cprotect’ package can help with this. 8.28 ‘verse’ ============ Synopsis: \begin{verse} LINE1 \\ LINE2 \\ ... \end{verse} An environment for poetry. Here are two lines from Shakespeare’s Romeo and Juliet. Then plainly know my heart's dear love is set \\ On the fair daughter of rich Capulet. Separate the lines of each stanza with ‘\\’, and use one or more blank lines to separate the stanzas. \begin{verse} \makebox[\linewidth][c]{\textit{Shut Not Your Doors} ---Walt Whitman} \\[1\baselineskip] Shut not your doors to me proud libraries, \\ For that which was lacking on all your well-fill'd shelves, \\ \qquad yet needed most, I bring, \\ Forth from the war emerging, a book I have made, \\ The words of my book nothing, the drift of it every thing, \\ A book separate, not link'd with the rest nor felt by the intellect, \\ But you ye untold latencies will thrill to every page. \end{verse} The output has margins indented on the left and the right, paragraphs are not indented, and the text is not right-justified. 9 Line breaking *************** The first thing LaTeX does when processing ordinary text is to translate your input file into a sequence of glyphs and spaces. To produce a printed document, this sequence must be broken into lines (and these lines must be broken into pages). LaTeX usually does the line (and page) breaking in the text body for you but in some environments you manually force line breaks. A common workflow is to get a final version of the document content before taking a final pass through and considering line breaks (and page breaks). This differs from word processing, where you are formatting text as you input it. Putting these off until the end prevents a lot of fiddling with breaks that will change anyway. 9.1 ‘\\’ ======== Synopsis, one of: \\ \\[MORESPACE] or one of: \\* \\*[MORESPACE] End the current line. The optional argument MORESPACE specifies extra vertical space to be inserted before the next line. This is a rubber length (*note Lengths::) and can be negative. The text before the line break is set at its normal length, that is, it is not stretched to fill out the line width. This command is fragile (*note \protect::). \title{My story: \\[0.25in] a tale of woe} The starred form, ‘\\*’, tells LaTeX not to start a new page between the two lines, by issuing a ‘\nobreak’. Explicit line breaks in the main text body are unusual in LaTeX. In particular, don’t start new paragraphs with ‘\\’. Instead leave a blank line between the two paragraphs. And don’t put in a sequence of ‘\\’’s to make vertical space. Instead use ‘\vspace{LENGTH}’, or ‘\leavevmode\vspace{LENGTH}’, or ‘\vspace*{LENGTH}’ if you want the space to not be thrown out at the top of a new page (*note \vspace::). The ‘\\’ command is mostly used outside of the main flow of text such as in a ‘tabular’ or ‘array’ environment or in an equation environment. The ‘\\’ command is a synonym for ‘\newline’ (*note \newline::) under ordinary circumstances (an example of an exception is the ‘p{...}’ column in a ‘tabular’ environment; *note tabular::). The ‘\\’ command is a macro, and its definition changes by context so that its definition in normal text, a ‘center’ environment, a ‘flushleft’ environment, and a ‘tabular’ are all different. In normal text when it forces a linebreak it is essentially a shorthand for ‘\newline’. It does not end horizontal mode or end the paragraph, it just inserts some glue and penalties so that when the paragraph does end a linebreak will occur at that point, with the short line padded with white space. You get ‘LaTeX Error: There's no line here to end’ if you use ‘\\’ to ask for a new line, rather than to end the current line. An example is if you have ‘\begin{document}\\’ or, more likely, something like this. \begin{center} \begin{minipage}{0.5\textwidth} \\ In that vertical space put your mark. \end{minipage} \end{center} Fix it by replacing the double backslash with something like ‘\vspace{\baselineskip}’. 9.2 ‘\obeycr’ & ‘\restorecr’ ============================ The ‘\obeycr’ command makes a return in the input file (‘^^M’, internally) the same as ‘\\’, followed by ‘\relax’. So each new line in the input will also be a new line in the output. The ‘\restorecr’ command restores normal line-breaking behavior. This is not the way to show verbatim text or computer code. Use ‘verbatim’ (*note verbatim::) instead. With LaTeX’s usual defaults, this aaa bbb \obeycr ccc ddd eee \restorecr fff ggg hhh iii produces output like this. aaa bbb ccc ddd eee fff ggg hhh iii The indents are paragraph indents. 9.3 ‘\newline’ ============== In ordinary text, this ends a line in a way that does not right-justify it, so the text before the end of line is not stretched. That is, in paragraph mode (*note Modes::), the ‘\newline’ command is equivalent to double-backslash (*note \\::). This command is fragile (*note \protect::). However, the two commands are different inside a ‘tabular’ or ‘array’ environment. In a column with a specifier producing a paragraph box such as typically ‘p{...}’, ‘\newline’ will insert a line end inside of the column; that is, it does not break the entire tabular row. To break the entire row use ‘\\’ or its equivalent ‘\tabularnewline’. This will print ‘Name:’ and ‘Address:’ as two lines in a single cell of the table. \begin{tabular}{p{1in}@{\hspace{2in}}p{1in}} Name: \newline Address: &Date: \\ \hline \end{tabular} The ‘Date:’ will be baseline-aligned with ‘Name:’. 9.4 ‘\-’ (discretionary hyphen) =============================== Tell LaTeX that it may hyphenate the word at that point. When you insert ‘\-’ commands in a word, the word will only be hyphenated at those points and not at any of the other hyphenation points that LaTeX might otherwise have chosen. This command is robust (*note \protect::). LaTeX is good at hyphenating and usually finds most of the correct hyphenation points, while almost never using an incorrect one. The ‘\-’ command is for exceptional cases. For example, LaTeX does not ordinarily hyphenate words containing a hyphen. Below, the long and hyphenated word means LaTeX has to put in unacceptably large spaces to set the narrow column. \begin{tabular}{rp{1.75in}} Isaac Asimov &The strain of anti-intellectualism % an\-ti-in\-tel\-lec\-tu\-al\-ism has been a constant thread winding its way through our political and cultural life, nurtured by the false notion that democracy means that `my ignorance is just as good as your knowledge'. \end{tabular} Commenting out the third line and uncommenting the fourth makes a much better fit. The ‘\-’ command only allows LaTeX to break there, it does not require that it break there. You can force a split with something like ‘Hef-\linebreak feron’. Of course, if you later change the text then this forced break may look out of place, so this approach requires care. 9.5 ‘\discretionary’ (generalized hyphenation point) ==================================================== Synopsis: \discretionary{PRE-BREAK}{POST-BREAK}{NO-BREAK} Handle word changes around hyphens. This command is not often used in LaTeX documents. If a line break occurs at the point where ‘\discretionary’ appears then TeX puts PRE-BREAK at the end of the current line and puts POST-BREAK at the start of the next line. If there is no line break here then TeX puts NO-BREAK. In ‘difficult’ the three letters ‘ffi’ form a ligature. But TeX can nonetheless break between the two ‘f’’s with this. di\discretionary{f-}{fi}{ffi}cult Note that users do not have to do this. It is typically handled automatically by TeX’s hyphenation algorithm. 9.6 ‘\fussy’ & ‘\sloppy’ ======================== Declarations to make TeX more picky or less picky about line breaking. Declaring ‘\fussy’ usually avoids too much space between words, at the cost of an occasional overfull box. Conversely, ‘\sloppy’ avoids overfull boxes while suffering loose interword spacing. The default is ‘\fussy’. Line breaking in a paragraph is controlled by whichever declaration is current at the end of the paragraph, i.e., at the blank line or ‘\par’ or displayed equation ending that paragraph. So to affect the line breaks, include that paragraph-ending material in the scope of the command. 9.6.1 ‘sloppypar’ ----------------- Synopsis: \begin{sloppypar} ... paragraphs ... \end{sloppypar} Typeset the paragraphs with ‘\sloppy’ in effect (*note \fussy & \sloppy::). Use this to locally adjust line breaking, to avoid ‘Overfull box’ or ‘Underfull box’ errors. The example is simple. \begin{sloppypar} Her plan for the morning thus settled, she sat quietly down to her book after breakfast, resolving to remain in the same place and the same employment till the clock struck one; and from habitude very little incommoded by the remarks and ejaculations of Mrs.\ Allen, whose vacancy of mind and incapacity for thinking were such, that as she never talked a great deal, so she could never be entirely silent; and, therefore, while she sat at her work, if she lost her needle or broke her thread, if she heard a carriage in the street, or saw a speck upon her gown, she must observe it aloud, whether there were anyone at leisure to answer her or not. \end{sloppypar} 9.7 ‘\hyphenation’ ================== Synopsis: \hyphenation{WORD1 ...} Declares allowed hyphenation points within the words in the list. The words in that list are separated by spaces. Show permitted points for hyphenation with a dash character, ‘-’. Here is an example: \hyphenation{hat-er il-lit-e-ra-ti tru-th-i-ness} Use lowercase letters. TeX will only hyphenate if the word matches exactly, no inflections are tried. Multiple ‘\hyphenation’ commands accumulate. 9.8 ‘\linebreak’ & ‘\nolinebreak’ ================================= Synopses, one of: \linebreak \linebreak[ZERO-TO-FOUR] or one of these. \nolinebreak \nolinebreak[ZERO-TO-FOUR] Encourage or discourage a line break. The optional ZERO-TO-FOUR is an integer lying between 0 and 4 that allows you to soften the instruction. The default is 4, so that without the optional argument these commands entirely force or prevent the break. But for instance, ‘\nolinebreak[1]’ is a suggestion that another place may be better. The higher the number, the more insistent the request. Both commands are fragile (*note \protect::). Here we tell LaTeX that a good place to put a linebreak is after the standard legal text. \boilerplatelegal{} \linebreak[2] We especially encourage applications from members of traditionally underrepresented groups. When you issue ‘\linebreak’, the spaces in the line are stretched out so that the break point reaches the right margin. *Note \\:: and *note \newline::, to have the spaces not stretched out. 10 Page breaking **************** Ordinarily LaTeX automatically takes care of breaking output into pages with its usual aplomb. But if you are writing commands, or tweaking the final version of a document, then you may need to understand how to influence its actions. LaTeX’s algorithm for splitting a document into pages is more complex than just waiting until there is enough material to fill a page and outputting the result. Instead, LaTeX typesets more material than would fit on the page and then chooses a break that is optimal in some way (it has the smallest “badness”). An example of the advantage of this approach is that if the page has some vertical space that can be stretched or shrunk, such as with rubber lengths between paragraphs, then LaTeX can use that to avoid widow lines (where a new page starts with the last line of a paragraph; LaTeX can squeeze the extra line onto the first page) and orphans (where the first line of paragraph is at the end of a page; LaTeX can stretch the material of the first page so the extra line falls on the second page). Another example is where LaTeX uses available vertical shrinkage to fit on a page not just the header for a new section but also the first two lines of that section. But LaTeX does not optimize over the entire document’s set of page breaks. So it can happen that the first page break is great but the second one is lousy; to break the current page LaTeX doesn’t look as far ahead as the next page break. So occasionally you may want to influence page breaks while preparing a final version of a document. *Note Layout::, for more material that is relevant to page breaking. 10.1 ‘\clearpage’ & ‘\cleardoublepage’ ====================================== Synopsis: \clearpage or \cleardoublepage End the current page and output all of the pending floating figures and tables (*note Floats::). If there are too many floats to fit on the page then LaTeX will put in extra pages containing only floats. In two-sided printing, ‘\cleardoublepage’ also makes the next page of content a right-hand page, an odd-numbered page, if necessary inserting a blank page. The ‘\clearpage’ command is robust while ‘\cleardoublepage’ is fragile (*note \protect::). LaTeX’s page breaks are optimized so ordinarily you only use this command in a document body to polish the final version, or inside commands. The ‘\cleardoublepage’ command will put in a blank page, but it will have the running headers and footers. To get a really blank page, use this command. \let\origdoublepage\cleardoublepage \newcommand{\clearemptydoublepage}{% \clearpage {\pagestyle{empty}\origdoublepage}% } If you want LaTeX’s standard ‘\chapter’ command to do this then add the line ‘\let\cleardoublepage\clearemptydoublepage’. (Of course this affects all uses of ‘\cleardoublepage’, not just the one in ‘\chapter’.) The command ‘\newpage’ (*note \newpage::) also ends the current page, but without clearing pending floats. And, if LaTeX is in two-column mode then ‘\newpage’ ends the current column while ‘\clearpage’ and ‘\cleardoublepage’ end the current page. 10.2 ‘\newpage’ =============== Synopsis: \newpage End the current page. This command is robust (*note \protect::). LaTeX’s page breaks are optimized so ordinarily you only use this command in a document body to polish the final version, or inside commands. While the commands ‘\clearpage’ and ‘\cleardoublepage’ also end the current page, in addition they clear pending floats (*note \clearpage & \cleardoublepage::). And, if LaTeX is in two-column mode then ‘\clearpage’ and ‘\cleardoublepage’ end the current page, possibly leaving an empty column, while ‘\newpage’ only ends the current column. In contrast with ‘\pagebreak’ (*note \pagebreak & \nopagebreak::), the ‘\newpage’ command will cause the new page to start right where requested. This Four score and seven years ago our fathers brought forth on this continent, \newpage \noindent a new nation, conceived in Liberty, and dedicated to the proposition that all men are created equal. makes a new page start after ‘continent’, and the cut-off line is not right justified. In addition, ‘\newpage’ does not vertically stretch out the page, as ‘\pagebreak’ does. 10.3 ‘\enlargethispage’ ======================= Synopsis, one of: \enlargethispage{SIZE} \enlargethispage*{SIZE} Enlarge the ‘\textheight’ for the current page. The required argument SIZE must be a rigid length (*note Lengths::). It may be positive or negative. This command is fragile (*note \protect::). A common strategy is to wait until you have the final text of a document, and then pass through it tweaking line and page breaks. This command allows you some page size leeway. This will allow one extra line on the current page. \enlargethispage{\baselineskip} The starred form ‘\enlargesthispage*’ tries to squeeze the material together on the page as much as possible, for the common use case of getting one more line on the page. This is often used together with an explicit ‘\pagebreak’. 10.4 ‘\pagebreak’ & ‘\nopagebreak’ ================================== Synopses: \pagebreak \pagebreak[ZERO-TO-FOUR] or \nopagebreak \nopagebreak[ZERO-TO-FOUR] Encourage or discourage a page break. The optional ZERO-TO-FOUR is an integer that allows you to soften the request. The default is 4, so that without the optional argument these commands entirely force or prevent the break. But for instance ‘\nopagebreak[1]’ suggests to LaTeX that another spot might be preferable. The higher the number, the more insistent the request. Both commands are fragile (*note \protect::). LaTeX’s page endings are optimized so ordinarily you only use these commands in a document body to polish the final version, or inside commands. If you use these inside a paragraph, they apply to the point following the line in which they appear. So this Four score and seven years ago our fathers brought forth on this continent, \pagebreak a new nation, conceived in Liberty, and dedicated to the proposition that all men are created equal. does not give a page break at ‘continent’, but instead at ‘nation’, since that is where LaTeX breaks that line. In addition, with ‘\pagebreak’ the vertical space on the page is stretched out where possible so that it extends to the normal bottom margin. This can look strange, and if ‘\flushbottom’ is in effect this can cause you to get ‘Underfull \vbox (badness 10000) has occurred while \output is active’. *Note \newpage::, for a command that does not have these effects. (There is an obsolete declaration ‘\samepage’, which tries to only allow a break between two paragraphs. There is a related environment ‘samepage’, also obsolete. Neither of these work reliably. For more on keeping material on the same page, see the FAQ entry .) 11 Footnotes ************ Place a footnote at the bottom of the current page, as here. Noël Coward quipped that having to read a footnote is like having to go downstairs to answer the door, while in the midst of making love.\footnote{% I wouldn't know, I don't read footnotes.} You can put multiple footnotes on a page. If the footnote text becomes too long then it will flow to the next page. You can also produce footnotes by combining the ‘\footnotemark’ and the ‘\footnotetext’ commands, which is useful in special circumstances. To make bibliographic references come out as footnotes you need to include a bibliographic style with that behavior (*note Using BibTeX::). 11.1 ‘\footnote’ ================ Synopsis, one of: \footnote{TEXT} \footnote[NUMBER]{TEXT} Place a footnote TEXT at the bottom of the current page. There are over a thousand footnotes in Gibbon's \textit{Decline and Fall of the Roman Empire}.\footnote{% After reading an early version with endnotes David Hume complained, ``One is also plagued with his Notes, according to the present Method of printing the Book'' and suggested that they ``only to be printed at the Margin or the Bottom of the Page.''} The optional argument NUMBER allows you to specify the number of the footnote. If you use this then LaTeX does not increment the ‘footnote’ counter. By default, LaTeX uses arabic numbers as footnote markers. Change this with something like ‘\renewcommand{\thefootnote}{\fnsymbol{footnote}}’, which uses a sequence of symbols (*note \alph \Alph \arabic \roman \Roman \fnsymbol::). To make this change global put that in the preamble. If you make the change local then you may want to reset the counter with ‘\setcounter{footnote}{0}’. LaTeX determines the spacing of footnotes with two parameters. ‘\footnoterule’ Produces the rule separating the main text on a page from the page’s footnotes. Default dimensions in the standard document classes (except ‘slides’, where it does not appear) is: vertical thickness of ‘0.4pt’, and horizontal size of ‘0.4\columnwidth’ long. Change the rule with something like this. \renewcommand{\footnoterule}{% Kerns avoid vertical space \kern -3pt % This -3 is negative \hrule width \textwidth height 1pt % of the sum of this 1 \kern 2pt} % and this 2 ‘\footnotesep’ The height of the strut placed at the beginning of the footnote (*note \strut::). By default, this is set to the normal strut for ‘\footnotesize’ fonts (*note Font sizes::), therefore there is no extra space between footnotes. This is ‘6.65pt’ for ‘10pt’, ‘7.7pt’ for ‘11pt’, and ‘8.4pt’ for ‘12pt’. Change it as with ‘\setlength{\footnotesep}{11pt}’. The ‘\footnote’ command is fragile (*note \protect::). LaTeX’s default puts many restrictions on where you can use a ‘\footnote’; for instance, you cannot use it in an argument to a sectioning command such as ‘\chapter’ (it can only be used in outer paragraph mode; *note Modes::). There are some workarounds; see following sections. In a ‘minipage’ environment the ‘\footnote’ command uses the ‘mpfootnote’ counter instead of the ‘footnote’ counter, so they are numbered independently. They are shown at the bottom of the environment, not at the bottom of the page. And by default they are shown alphabetically. *Note minipage:: and *note Footnotes in a table::. 11.2 ‘\footnotemark’ ==================== Synopsis, one of: \footnotemark \footnotemark[NUMBER] Put the current footnote mark in the text. To specify associated text for the footnote see *note \footnotetext::. The optional argument NUMBER causes the command to use that number to determine the footnote mark. This command can be used in inner paragraph mode (*note Modes::). If you use ‘\footnotemark’ without the optional argument then it increments the ‘footnote’ counter, but if you use the optional NUMBER then it does not. The next example produces several consecutive footnote markers referring to the same footnote. The first theorem\footnote{Due to Gauss.} and the second theorem\footnotemark[\value{footnote}] and the third theorem.\footnotemark[\value{footnote}] If there are intervening footnotes then you must remember the value of the number of the common mark. This example gives the same institutional affiliation to both the first and third authors (‘\thanks’ is a version of ‘\footnote’), by-hand giving the number of the footnote. \title{A Treatise on the Binomial Theorem} \author{J Moriarty\thanks{University of Leeds} \and A C Doyle\thanks{Durham University} \and S Holmes\footnotemark[1]} \begin{document} \maketitle This uses a counter to remember the footnote number. The third sentence is followed by the same footnote marker as the first. \newcounter{footnoteValueSaver} All babies are illogical.\footnote{% Lewis Carroll.}\setcounter{footnoteValueSaver}{\value{footnote}} Nobody is despised who can manage a crocodile.\footnote{% Captain Hook.} Illogical persons are despised.\footnotemark[\value{footnoteValueSaver}] Therefore, anyone who can manage a crocodile is not a baby. This example accomplishes the same by using the package ‘cleveref’. \usepackage{cleveref}[2012/02/15] % in preamble \crefformat{footnote}{#2\footnotemark[#1]#3} ... The theorem is from Evers.\footnote{\label{fn:TE}Tinker, Evers, 1994.} The corollary is from Chance.\footnote{Evers, Chance, 1990.} But the key lemma is from Tinker.\cref{fn:TE} It will work with the package ‘hyperref’. 11.3 ‘\footnotetext’ ==================== Synopsis, one of: \footnotetext{TEXT} \footnotetext[NUMBER]{TEXT} Place TEXT at the bottom of the page as a footnote. It pairs with ‘\footnotemark’ (*note \footnotemark::) and can come anywhere after that command, but must appear in outer paragraph mode (*note Modes::). The optional argument NUMBER changes the number of the footnote mark. *Note \footnotemark:: and *note Footnotes in a table::, for usage examples. 11.4 Footnotes in section headings ================================== Putting a footnote in a section heading, as in: \section{Full sets\protect\footnote{This material due to ...}} causes the footnote to appear at the bottom of the page where the section starts, as usual, but also at the bottom of the table of contents, where it is not likely to be desired. The simplest way to have it not appear on the table of contents is to use the optional argument to ‘\section’ \section[Please]{Please\footnote{% Don't footnote in chapter and section headers!}} No ‘\protect’ is needed in front of ‘\footnote’ here because what gets moved to the table of contents is the optional argument. 11.5 Footnotes in a table ========================= Inside a ‘tabular’ or ‘array’ environment the ‘\footnote’ command does not work; there is a footnote mark in the table cell but the footnote text does not appear. The solution is to use a ‘minipage’ environment as here (*note minipage::). \begin{center} \begin{minipage}{\textwidth} \centering \begin{tabular}{l|l} \textsc{Ship} &\textsc{Book} \\ \hline \textit{HMS Sophie} &Master and Commander \\ \textit{HMS Polychrest} &Post Captain \\ \textit{HMS Lively} &Post Captain \\ \textit{HMS Surprise} &A number of books\footnote{% Starting with \textit{HMS Surprise}.} \end{tabular} \end{minipage} \end{center} Inside a ‘minipage’, footnote marks are lowercase letters. Change that with something like ‘\renewcommand{\thempfootnote}{\arabic{mpfootnote}}’ (*note \alph \Alph \arabic \roman \Roman \fnsymbol::). The footnotes in the prior example appear at the bottom of the ‘minipage’. To have them appear at the bottom of the main page, as part of the regular footnote sequence, use the ‘\footnotemark’ and ‘\footnotetext’ pair and make a new counter. \newcounter{mpFootnoteValueSaver} \begin{center} \begin{minipage}{\textwidth} \setcounter{mpFootnoteValueSaver}{\value{footnote}} \centering \begin{tabular}{l|l} \textsc{Woman} &\textsc{Relationship} \\ \hline Mona &Attached\footnotemark \\ Diana Villiers &Eventual wife \\ Christine Hatherleigh Wood &Fiance\footnotemark \end{tabular} \end{minipage}% percent sign keeps footnote text close to minipage \stepcounter{mpFootnoteValueSaver}% \footnotetext[\value{mpFootnoteValueSaver}]{% Little is known other than her death.}% \stepcounter{mpFootnoteValueSaver}% \footnotetext[\value{mpFootnoteValueSaver}]{% Relationship is unresolved in XXI.} \end{center} For a floating ‘table’ environment (*note table::), use the ‘tablefootnote’ package. \usepackage{tablefootnote} % in preamble ... \begin{table} \centering \begin{tabular}{l|l} \textsc{Date} &\textsc{Campaign} \\ \hline 1862 &Fort Donelson \\ 1863 &Vicksburg \\ 1865 &Army of Northern Virginia\tablefootnote{% Ending the war.} \end{tabular} \caption{Forces captured by US Grant} \end{table} The footnote appears at the page bottom and is numbered in sequence with other footnotes. 11.6 Footnotes of footnotes =========================== Particularly in the humanities, authors can have multiple classes of footnotes, including having footnotes of footnotes. The package ‘bigfoot’ extends LaTeX’s default footnote mechanism in many ways, including allow these two, as in this example. \usepackage{bigfoot} % in preamble \DeclareNewFootnote{Default} \DeclareNewFootnote{from}[alph] % create class \footnotefrom{} ... The third theorem is a partial converse of the second.\footnotefrom{% Noted in Wilson.\footnote{Second edition only.}} 12 Definitions ************** LaTeX has support for making new commands of many different kinds. 12.1 ‘\newcommand’ & ‘\renewcommand’ ==================================== Synopses, one of (three regular forms, three starred forms): \newcommand{\CMD}{DEFN} \newcommand{\CMD}[NARGS]{DEFN} \newcommand{\CMD}[NARGS][OPTARGDEFAULT]{DEFN} \newcommand*{\CMD}{DEFN} \newcommand*{\CMD}[NARGS]{DEFN} \newcommand*{\CMD}[NARGS][OPTARGDEFAULT]{DEFN} or all the same possibilities with ‘\renewcommand’ instead of ‘\newcommand’: \renewcommand{\CMD}{DEFN} \renewcommand{\CMD}[NARGS]{DEFN} \renewcommand{\CMD}[NARGS][OPTARGDEFAULT]{DEFN} \renewcommand*{\CMD}{DEFN} \renewcommand*{\CMD}[NARGS]{DEFN} \renewcommand*{\CMD}[NARGS][OPTARGDEFAULT]{DEFN} Define or redefine a command (see also ‘\DeclareRobustCommand’ in *note Class and package commands::). The starred form of these two forbids the arguments from containing multiple paragraphs of text (in plain TeX terms: the commands are not ‘\long’). With the default form, arguments can be multiple paragraphs. These are the parameters (examples follow): CMD Required; ‘\CMD’ is the command name. It must begin with a backslash, ‘\’, and must not begin with the four character string ‘\end’. For ‘\newcommand’, it must not be already defined. For ‘\renewcommand’, this name must already be defined. NARGS Optional; an integer from 0 to 9, specifying the number of arguments that the command takes, including any optional argument. Omitting this argument is the same as specifying 0, meaning that the command has no arguments. If you redefine a command, the new version can have a different number of arguments than the old version. OPTARGDEFAULT Optional; if this argument is present then the first argument of ‘\CMD’ is optional, with default value OPTARGDEFAULT (which may be the empty string). If OPTARGDEFAULT is not present then ‘\CMD’ does not take an optional argument. That is, if ‘\CMD’ is called with a following argument in square brackets, as in ‘\CMD[OPTVAL]{...}...’, then within DEFN the parameter ‘#1’ is set to OPTVAL. On the other hand, if ‘\CMD’ is called without following square brackets then within DEFN the parameter ‘#1’ is set to OPTARGDEFAULT. In either case, the required arguments start with ‘#2’. Omitting ‘[OPTARGDEFAULT]’ from the definition is entirely different from giving the square brackets with empty contents, as in ‘[]’. The former says the command being defined takes no optional argument, so ‘#1’ is the first required argument (if NARGS ≥ 1); the latter sets the optional argument ‘#1’ to the empty string as the default, if no optional argument was given in the call. Similarly, omitting ‘[OPTVAL]’ from a call is also entirely different from giving the square brackets with empty contents. The former sets ‘#1’ to the value of OPTVAL (assuming the command was defined to take an optional argument); the latter sets ‘#1’ to the empty string, just as with any other value. If a command is not defined to take an optional argument, but is called with an optional argument, the results are unpredictable: there may be a LaTeX error, there may be incorrect typeset output, or both. DEFN Required; the text to be substituted for every occurrence of ‘\CMD’. The parameters ‘#1’, ‘#2’, ..., ‘#NARGS’ are replaced by the values supplied when the command is called (or by OPTARGDEFAULT in the case of an optional argument not specified in the call, as just explained). TeX ignores blanks in the source following a control word (*note Control sequences::), as in ‘\cmd ’. If you want a space there, one solution is to type ‘{}’ after the command (‘\cmd{} ’), and another solution is to use an explicit control space (‘\cmd\ ’). A simple example of defining a new command: ‘\newcommand{\RS}{Robin Smith}’ results in ‘\RS’ being replaced by the longer text. Redefining an existing command is similar: ‘\renewcommand{\qedsymbol}{{\small QED}}’. If you use ‘\newcommand’ and the command name has already been used then you get something like ‘LaTeX Error: Command \fred already defined. Or name \end... illegal, see p.192 of the manual’. Similarly, If you use ‘\renewcommand’ and the command name has not been defined then you get something like ‘LaTeX Error: \hank undefined’. Here the first definition creates a command with no arguments, and the second, a command with one required argument: \newcommand{\student}{Ms~O'Leary} \newcommand{\defref}[1]{Definition~\ref{#1}} Use the first as in ‘I highly recommend \student{} to you’. The second has a variable argument, so that ‘\defref{def:basis}’ expands to ‘Definition~\ref{def:basis}’, which ultimately expands to something like ‘Definition~3.14’. Similarly, but with two required arguments: ‘\newcommand{\nbym}[2]{$#1 \times #2$}’ is invoked as ‘\nbym{2}{k}’. This example has an optional argument. \newcommand{\salutation}[1][Sir or Madam]{Dear #1:} Then ‘\salutation’ gives ‘Dear Sir or Madam:’ while ‘\salutation[John]’ gives ‘Dear John:’. And ‘\salutation[]’ gives ‘Dear :’. This example has an optional argument and two required arguments. \newcommand{\lawyers}[3][company]{#2, #3, and~#1} I employ \lawyers[Howe]{Dewey}{Cheatem}. The output is ‘I employ Dewey, Cheatem, and Howe.’. The optional argument, ‘Howe’, is associated with ‘#1’, while ‘Dewey’ and ‘Cheatem’ are associated with ‘#2’ and ‘#3’. Because of the optional argument, ‘\lawyers{Dewey}{Cheatem}’ will give the output ‘I employ Dewey, Cheatem, and company.’. The braces around DEFN do not define a group, that is, they do not delimit the scope of the result of expanding DEFN. For example, with ‘\newcommand{\shipname}[1]{\it #1}’, in this sentence, The \shipname{Monitor} met the \shipname{Merrimac}. the words ‘met the’, and the period, would incorrectly be in italics. The solution is to put another pair of braces inside the definition: ‘\newcommand{\shipname}[1]{{\it #1}}’. 12.1.1 Control sequence, control word and control symbol -------------------------------------------------------- When reading input TeX converts the stream of read characters into a sequence of “tokens”. When TeX sees a backslash ‘\’, it will handle the following characters in a special way in order to make a “control sequence” token. The control sequences fall into two categories: • “control word”, when the control sequence is gathered from a ‘\’ followed by at least one ASCII letter (‘A-Z’ and ‘a-z’), followed by at least one non-letter. • “control symbol”, when the control sequence is gathered from a ‘\’ followed by one non-letter character. The sequence of characters so found after the ‘\’ is also called the “control sequence name”. Blanks after a control word are ignored and do not produce any whitespace in the output (*note \newcommand & \renewcommand:: and *note \(SPACE)::). Just as the ‘\relax’ command does nothing, the following input will simply print ‘Hello!’ (if you use the Emacs info viewer, turn on the ‘whitespace-mode’ minor mode to see the trailing spaces): Hel\relax lo! This is because blanks after ‘\relax’, including the newline, are ignored, and blanks at the beginning of a line are also ignored (*note Leading blanks::). 12.2 ‘\providecommand’ ====================== Synopses, one of: \providecommand{\CMD}{DEFN} \providecommand{\CMD}[NARGS]{DEFN} \providecommand{\CMD}[NARGS][OPTARGDEFAULT]{DEFN} \providecommand*{\CMD}{DEFN} \providecommand*{\CMD}[NARGS]{DEFN} \providecommand*{\CMD}[NARGS][OPTARGDEFAULT]{DEFN} Defines a command, as long as no command of this name already exists. If no command of this name already exists then this has the same effect as ‘\newcommand’. If a command of this name already exists then this definition does nothing. This is particularly useful in a file that may be loaded more than once, such as a style file. *Note \newcommand & \renewcommand::, for the description of the arguments. This example \providecommand{\myaffiliation}{Saint Michael's College} \providecommand{\myaffiliation}{Lyc\'ee Henri IV} From \myaffiliation. outputs ‘From Saint Michael's College.’. Unlike ‘\newcommand’, the repeated use of ‘\providecommand’ to (try to) define ‘\myaffiliation’ does not give an error. 12.3 ‘\makeatletter’ & ‘\makeatother’ ===================================== Synopsis: \makeatletter ... definition of commands with @ in their name .. \makeatother Use this pair when you redefine LaTeX commands that are named with an at-sign character ‘‘@’’. The ‘\makeatletter’ declaration makes the at-sign character have the category code of a letter, code 11. The ‘\makeatother’ declaration sets the category code of the at-sign to code 12, its default value. As TeX reads characters, it assigns each one a category code, or “catcode”. For instance, it assigns the backslash character ‘‘\’’ the catcode 0. Command names consist of a category 0 character, ordinarily backslash, followed by letters, category 11 characters (except that a command name can also consist of a category 0 character followed by a single non-letter symbol). LaTeX’s source code has the convention that some commands use ‘@’ in their name. These commands are mainly intended for package or class writers. The convention prevents authors who are just using a package or class from accidentally replacing such a command with one of their own, because by default the at-sign has catcode 12. Use the pair ‘\makeatletter’ and ‘\makeatother’ inside a ‘.tex’ file, typically in the preamble, when you are defining or redefining commands named with ‘@’, by having them surround your definition. Don’t use these inside ‘.sty’ or ‘.cls’ files since the ‘\usepackage’ and ‘\documentclass’ commands already arrange that the at-sign has the character code of a letter, catcode 11. For a comprehensive list of macros with an at-sign in their names see . In this example the class file has a command ‘\thesis@universityname’ that the user wants to change. These three lines should go in the preamble, before the ‘\begin{document}’. \makeatletter \renewcommand{\thesis@universityname}{Saint Michael's College} \makeatother 12.4 ‘\@ifstar’ =============== Synopsis: \newcommand{\mycmd}{\@ifstar{\mycmd@star}{\mycmd@nostar}} \newcommand{\mycmd@nostar}[NOSTAR-NUM-ARGS]{NOSTAR-BODY} \newcommand{\mycmd@star}[STAR-NUM-ARGS]{STAR-BODY} Many standard LaTeX environments or commands have a variant with the same name but ending with a star character ‘*’, an asterisk. Examples are the ‘table’ and ‘table*’ environments and the ‘\section’ and ‘\section*’ commands. When defining environments, following this pattern is straightforward because ‘\newenvironment’ and ‘\renewenvironment’ allow the environment name to contain a star. So you just have to write ‘\newenvironment{MYENV}’ or ‘\newenvironment{MYENV*}’ and continue the definition as usual. For commands the situation is more complex as the star not being a letter cannot be part of the command name. As in the synopsis above, there will be a user-called command, given above as ‘\mycmd’, which peeks ahead to see if it is followed by a star. For instance, LaTeX does not really have a ‘\section*’ command; instead, the ‘\section’ command peeks ahead. This command does not accept arguments but instead expands to one of two commands that do accept arguments. In the synopsis these two are ‘\mycmd@nostar’ and ‘\mycmd@star’. They could take the same number of arguments or a different number, or no arguments at all. As always, in a LaTeX document a command using an at-sign ‘@’ in its name must be enclosed inside a ‘\makeatletter ... \makeatother’ block (*note \makeatletter & \makeatother::). This example of ‘\@ifstar’ defines the command ‘\ciel’ and a variant ‘\ciel*’. Both have one required argument. A call to ‘\ciel{blue}’ will return "not starry blue sky" while ‘\ciel*{night}’ will return "starry night sky". \makeatletter \newcommand*{\ciel@unstarred}[1]{not starry #1 sky} \newcommand*{\ciel@starred}[1]{starry #1 sky} \newcommand*{\ciel}{\@ifstar{\ciel@starred}{\ciel@unstarred}} \makeatother In the next example, the starred variant takes a different number of arguments than the unstarred one. With this definition, Agent 007’s ‘``My name is \agentsecret*{Bond}, \agentsecret{James}{Bond}.''’ is equivalent to entering the commands ‘``My name is \textsc{Bond}, \textit{James} textsc{Bond}.''’ \newcommand*{\agentsecret@unstarred}[2]{\textit{#1} \textsc{#2}} \newcommand*{\agentsecret@starred}[1]{\textsc{#1}} \newcommand*{\agentsecret}{% \@ifstar{\agentsecret@starred}{\agentsecret@unstarred}} After a command name, a star is handled similarly to an optional argument. (This differs from environment names in which the star is part of the name itself and as such could be in any position.) Thus, it is technically possible to put any number of spaces between the command and the star. Thus ‘\agentsecret*{Bond}’ and ‘\agentsecret *{Bond}’ are equivalent. However, the standard practice is not to insert any such spaces. There are two alternative ways to accomplish the work of ‘\@ifstar’. (1) The ‘suffix’ package allows the construct ‘\newcommand\mycommand{UNSTARRED-VARIANT}’ followed by ‘\WithSuffix\newcommand\mycommand*{STARRED-VARIANT}’. (2) LaTeX provides the ‘xparse’ package, which allows this code: \NewDocumentCommand\foo{s}{\IfBooleanTF#1 {STARRED-VARIANT}% {UNSTARRED-VARIANT}% } 12.5 ‘\newcounter’: Allocating a counter ======================================== Synopsis, one of: \newcounter{COUNTERNAME} \newcounter{COUNTERNAME}[SUPERCOUNTER] Globally defines a new counter named COUNTERNAME and initialize it to zero (*note Counters::). The name COUNTERNAME must consist of letters only. It does not begin with a backslash. This name must not already be in use by another counter. When you use the optional argument ‘[SUPERCOUNTER]’ then the counter COUNTERNAME will be reset to zero whenever SUPERCOUNTER is incremented. For example, ordinarily ‘subsection’ is numbered within ‘section’ so that any time you increment SECTION, either with ‘\stepcounter’ (*note \stepcounter::) or ‘\refstepcounter’ (*note \refstepcounter::), then LaTeX will reset SUBSECTION to zero. This example \newcounter{asuper} \setcounter{asuper}{1} \newcounter{asub}[asuper] \setcounter{asub}{3} % Note `asuper' The value of asuper is \arabic{asuper} and of asub is \arabic{asub}. \stepcounter{asuper} Now asuper is \arabic{asuper} while asub is \arabic{asub}. produces ‘The value of asuper is 1 and that of asub is 3’ and ‘Now asuper is 2 while asub is 0’. If the counter already exists, for instance by entering ‘asuper’ twice, then you get something like ‘LaTeX Error: Command \c@asuper already defined. Or name \end... illegal, see p.192 of the manual.’. If you use the optional argument then the super counter must already exist. Entering ‘\newcounter{jh}[lh]’ when ‘lh’ is not a defined counter will get you ‘LaTeX Error: No counter 'lh' defined.’ 12.6 ‘\newlength’ ================= Synopsis: \newlength{\LEN} Allocate a new length register (*note Lengths::). The required argument ‘\LEN’ has to be a control sequence (*note Control sequences::), and as such must begin with a backslash, ‘\’ under normal circumstances. The new register holds rubber lengths such as ‘72.27pt’ or ‘1in plus.2in minus.1in’ (a LaTeX length register is what plain TeX calls a ‘skip’ register). The initial value is zero. The control sequence ‘\LEN’ must not be already defined. An example: \newlength{\graphichgt} If you forget the backslash then you get ‘Missing control sequence inserted’. If the control sequence already exists then you get something like ‘LaTeX Error: Command \graphichgt already defined. Or name \end... illegal, see p.192 of the manual’. 12.7 ‘\newsavebox’ ================== Synopsis: \newsavebox{\CMD} Define \CMD, the string consisting of a backslash followed by CMD, to refer to a new bin for storing material. These bins hold material that has been typeset, to use multiple times or to measure or manipulate (*note Boxes::). The bin name \CMD is required, must start with a backslash, \, and must not already be a defined command. This command is fragile (*note \protect::). This allocates a bin and then puts typeset material into it. \newsavebox{\logobox} \savebox{\logobox}{LoGo} Our logo is \usebox{\logobox}. The output is ‘Our logo is LoGo’. If there is an already defined bin then you get something like ‘LaTeX Error: Command \logobox already defined. Or name \end... illegal, see p.192 of the manual’. The allocation of a box is global. 12.8 ‘\newenvironment’ & ‘\renewenvironment’ ============================================ Synopses, one of: \newenvironment{ENV}{BEGDEF}{ENDDEF} \newenvironment{ENV}[NARGS]{BEGDEF}{ENDDEF} \newenvironment{ENV}[NARGS][OPTARGDEFAULT]{BEGDEF}{ENDDEF} \newenvironment*{ENV}{BEGDEF}{ENDDEF} \newenvironment*{ENV}[NARGS]{BEGDEF}{ENDDEF} \newenvironment*{ENV}[NARGS][OPTARGDEFAULT]{BEGDEF}{ENDDEF} or one of these. \renewenvironment{ENV}{BEGDEF}{ENDDEF} \renewenvironment{ENV}[NARGS]{BEGDEF}{ENDDEF} \renewenvironment{ENV}[NARGS][OPTARGDEFAULT]{BEGDEF}{ENDDEF} \renewenvironment*{ENV}{BEGDEF}{ENDDEF} \renewenvironment*{ENV}[NARGS]{BEGDEF}{ENDDEF} \renewenvironment*{ENV}[NARGS][OPTARGDEFAULT]{BEGDEF}{ENDDEF} Define or redefine the environment ENV, that is, create the construct ‘\begin{ENV} ... BODY ... \end{ENV}’. The starred form of these commands requires that the arguments not contain multiple paragraphs of text. However, the body of these environments can contain multiple paragraphs. ENV Required; the environment name. It consists only of letters or the ‘*’ character, and thus does not begin with backslash, ‘\’. It must not begin with the string ‘end’. For ‘\newenvironment’, the name ENV must not be the name of an already existing environment, and also the command ‘\ENV’ must be undefined. For ‘\renewenvironment’, ENV must be the name of an existing environment. NARGS Optional; an integer from 0 to 9 denoting the number of arguments of that the environment takes. When you use the environment these arguments appear after the ‘\begin’, as in ‘\begin{ENV}{ARG1} ... {ARGN}’. Omitting this is equivalent to setting it to 0; the environment will have no arguments. When redefining an environment, the new version can have a different number of arguments than the old version. OPTARGDEFAULT Optional; if this is present then the first argument of the defined environment is optional, with default value OPTARGDEFAULT (which may be the empty string). If this is not in the definition then the environment does not take an optional argument. That is, when OPTARGDEFAULT is present in the definition of the environment then you can start the environment with square brackets, as in ‘\begin{ENV}[OPTVAL]{...} ... \end{ENV}’. In this case, within BEGDEFN the parameter ‘#1’ is set to the value of OPTVAL. If you call ‘\begin{ENV}’ without square brackets, then within BEGDEFN the parameter ‘#1’ is set to the value of the default OPTARGDEFAULT. In either case, any required arguments start with ‘#2’. Omitting ‘[MYVAL]’ in the call is different than having the square brackets with no contents, as in ‘[]’. The former results in ‘#1’ expanding to OPTARGDEFAULT; the latter results in ‘#1’ expanding to the empty string. BEGDEF Required; the text expanded at every occurrence of ‘\begin{ENV}’. Within BEGDEF, the parameters ‘#1’, ‘#2’, ... ‘#NARGS’, are replaced by the values that you supply when you call the environment; see the examples below. ENDDEF Required; the text expanded at every occurrence of ‘\end{ENV}’. This may not contain any parameters, that is, you cannot use ‘#1’, ‘#2’, etc., here (but see the final example below). All environments, that is to say the BEGDEF code, the environment body, and the ENDDEF code, are processed within a group. Thus, in the first example below, the effect of the ‘\small’ is limited to the quote and does not extend to material following the environment. If you try to define an environment and the name has already been used then you get something like ‘LaTeX Error: Command \fred already defined. Or name \end... illegal, see p.192 of the manual’. If you try to redefine an environment and the name has not yet been used then you get something like ‘LaTeX Error: Environment hank undefined.’. This example gives an environment like LaTeX’s ‘quotation’ except that it will be set in smaller type. \newenvironment{smallquote}{% \small\begin{quotation} }{% \end{quotation} } This has an argument, which is set in boldface at the start of a paragraph. \newenvironment{point}[1]{% \noindent\textbf{#1} }{% } This one shows the use of a optional argument; it gives a quotation environment that cites the author. \newenvironment{citequote}[1][Shakespeare]{% \begin{quotation} \noindent\textit{#1}: }{% \end{quotation} } The author’s name is optional, and defaults to ‘Shakespeare’. In the document, use the environment like this. \begin{citequote}[Lincoln] ... \end{citequote} The final example shows how to save the value of an argument to use in ENDDEF, in this case in a box (*note \sbox & \savebox::). \newsavebox{\quoteauthor} \newenvironment{citequote}[1][Shakespeare]{% \sbox\quoteauthor{#1}% \begin{quotation} }{% \hspace{1em plus 1fill}---\usebox{\quoteauthor} \end{quotation} } 12.9 ‘\newtheorem’ ================== Synopses: \newtheorem{NAME}{TITLE} \newtheorem{NAME}{TITLE}[NUMBERED_WITHIN] \newtheorem{NAME}[NUMBERED_LIKE]{TITLE} Define a new theorem-like environment. You can specify one of NUMBERED_WITHIN and NUMBERED_LIKE, or neither, but not both. The first form, ‘\newtheorem{NAME}{TITLE}’, creates an environment that will be labelled with TITLE; see the first example below. The second form, ‘\newtheorem{NAME}{TITLE}[NUMBERED_WITHIN]’, creates an environment whose counter is subordinate to the existing counter NUMBERED_WITHIN, so this counter will be reset when NUMBERED_WITHIN is reset. See the second example below. The third form ‘\newtheorem{NAME}[NUMBERED_LIKE]{TITLE}’, with optional argument between the two required arguments, creates an environment whose counter will share the previously defined counter NUMBERED_LIKE. See the third example. This command creates a counter named NAME. In addition, unless the optional argument NUMBERED_LIKE is used, inside of the theorem-like environment the current ‘\ref’ value will be that of ‘\theNUMBERED_WITHIN’ (*note \ref::). This declaration is global. It is fragile (*note \protect::). Arguments: NAME The name of the environment. It is a string of letters. It must not begin with a backslash, ‘\’. It must not be the name of an existing environment, and the command name ‘\NAME’ must not already be defined. TITLE The text to be printed at the beginning of the environment, before the number. For example, ‘Theorem’. NUMBERED_WITHIN Optional; the name of an already defined counter, usually a sectional unit such as ‘chapter’ or ‘section’. When the NUMBERED_WITHIN counter is reset then the NAME environment’s counter will also be reset. If this optional argument is not used then the command ‘\theNAME’ is set to ‘\arabic{NAME}’. NUMBERED_LIKE Optional; the name of an already defined theorem-like environment. The new environment will be numbered in sequence with NUMBERED_LIKE. Without any optional arguments the environments are numbered sequentially. The example below has a declaration in the preamble that results in ‘Definition 1’ and ‘Definition 2’ in the output. \newtheorem{defn}{Definition} \begin{document} \section{...} \begin{defn} First def \end{defn} \section{...} \begin{defn} Second def \end{defn} This example has the same document body as the prior one. But here ‘\newtheorem’’s optional argument NUMBERED_WITHIN is given as ‘section’, so the output is like ‘Definition 1.1’ and ‘Definition 2.1’. \newtheorem{defn}{Definition}[section] \begin{document} \section{...} \begin{defn} First def \end{defn} \section{...} \begin{defn} Second def \end{defn} In the next example there are two declarations in the preamble, the second of which calls for the new ‘thm’ environment to use the same counter as ‘defn’. It gives ‘Definition 1.1’, followed by ‘Theorem 2.1’ and ‘Definition 2.2’. \newtheorem{defn}{Definition}[section] \newtheorem{thm}[defn]{Theorem} \begin{document} \section{...} \begin{defn} First def \end{defn} \section{...} \begin{thm} First thm \end{thm} \begin{defn} Second def \end{defn} 12.10 ‘\newfont’ ================ This command is obsolete. This description is here only to help with old documents. New documents should define fonts in families through the New Font Selection Scheme which allows you to, for example, associate a boldface with a roman (*note Fonts::). Synopsis: \newfont{\CMD}{FONT DESCRIPTION} Define a command ‘\CMD’ that will change the current font. The control sequence must not already be defined. It must begin with a backslash, ‘\’. The FONT DESCRIPTION consists of a FONTNAME and an optional “at clause”. LaTeX will look on your system for a file named ‘FONTNAME.tfm’. The at clause can have the form either ‘at DIMEN’ or ‘scaled FACTOR’, where a FACTOR of ‘1000’ means no scaling. For LaTeX’s purposes, all this does is scale all the character and other font dimensions relative to the font’s design size, which is a value defined in the ‘.tfm’ file. This defines two equivalent fonts and typesets a few characters in each. \newfont{\testfontat}{cmb10 at 11pt} \newfont{\testfontscaled}{cmb10 scaled 1100} \testfontat abc \testfontscaled abc 12.11 ‘\protect’ ================ All LaTeX commands are either “fragile” or “robust”. A fragile command can break when it is used in the argument to certain other commands. Commands that contain data that LaTeX writes to an auxiliary file and re-reads later are fragile. This includes material that goes into a table of contents, list of figures, list of tables, etc. Fragile commands also include line breaks, any command that has an optional argument, and many more. To prevent such commands from breaking, one solution is to preceded them with the command ‘\protect’. For example, when LaTeX runs the ‘\section{SECTION NAME}’ command it writes the SECTION NAME text to the ‘.aux’ auxiliary file, moving it there for use elsewhere in the document such as in the table of contents. Any argument that is internally expanded by LaTeX without typesetting it directly is referred to as a “moving argument”. A command is fragile if it can expand during this process into invalid TeX code. Some examples of moving arguments are those that appear in the ‘\caption{...}’ command (*note figure::), in the ‘\thanks{...}’ command (*note \maketitle::), and in @-expressions in the ‘tabular’ and ‘array’ environments (*note tabular::). If you get strange errors from commands used in moving arguments, try preceding it with ‘\protect’. Every fragile commands must be protected with their own ‘\protect’. Although usually a ‘\protect’ command doesn’t hurt, length commands are robust and should not be preceded by a ‘\protect’ command. Nor can a ‘\protect’ command be used in the argument to ‘\addtocounter’ or ‘\setcounter’ command. In this example the ‘\caption’ command gives a mysterious error about an extra curly brace. Fix the problem by preceding each ‘\raisebox’ command with ‘\protect’. \begin{figure} ... \caption{Company headquarters of A\raisebox{1pt}{B}\raisebox{-1pt}{C}} \end{figure} In the next example the ‘\tableofcontents’ command gives an error because the ‘\(..\)’ in the section title expands to illegal TeX in the ‘.toc’ file. You can solve this by changing ‘\(..\)’ to ‘\protect\(..\protect\)’. \begin{document} \tableofcontents ... \section{Einstein's \( e=mc^2 \)} ... 12.12 ‘\ignorespaces & \ignorespacesafterend’ ============================================= Synopsis: \ignorespaces or \ignorespacesafterend Both commands cause LaTeX to ignore blanks (that is, characters of catcode 10 such as space or tabulation) after the end of the command up to the first box or non-blank character. The first is a primitive command of TeX, and the second is LaTeX-specific. The ‘\ignorespaces’ is often used when defining commands via ‘\newcommand’, or ‘\newenvironment’, or ‘\def’. The example below illustrates. It allows a user to show the points values for quiz questions in the margin but it is inconvenient because, as shown in the ‘enumerate’ list, users must not put any space between the command and the question text. \newcommand{\points}[1]{\makebox[0pt]{\makebox[10em][l]{#1~pts}} \begin{enumerate} \item\points{10}no extra space output here \item\points{15} extra space between the number and the `extra' \end{enumerate} The solution is to change to this. \newcommand{\points}[1]{% \makebox[0pt]{\makebox[10em][l]{#1~pts}}\ignorespaces} A second example shows blanks being removed from the front of text. The commands below allow a user to uniformly attach a title to names. But, as given, if a title accidentally starts with a space then ‘\fullname’ will reproduce that. \newcommand{\honorific}[1]{\def\honorific{#1}} % remember title \newcommand{\fullname}[1]{\honorific~#1} % put title before name \begin{tabular}{|l|} \honorific{Mr/Ms} \fullname{Jones} \\ % no extra space here \honorific{ Mr/Ms} \fullname{Jones} % extra space before title \end{tabular} To fix this, change to ‘\newcommand{\fullname}[1]{\ignorespaces\honorific~#1}’. The ‘\ignorespaces’ is also often used in a ‘\newenvironment’ at the end of the BEGIN clause, as in ‘\begin{newenvironment}{ENV NAME}{... \ignorespaces}{...}’. To strip blanks off the end of an environment use ‘\ignorespacesafterend’. An example is that this will show a much larger vertical space between the first and second environments than between the second and third. \newenvironment{eq}{\begin{equation}}{\end{equation}} \begin{eq} e=mc^2 \end{eq} \begin{equation} F=ma \end{equation} \begin{equation} E=IR \end{equation} Putting a comment character ‘%’ immediately after the ‘\end{eq}’ will make the vertical space disappear, but that is inconvenient. The solution is to change to ‘\newenvironment{eq}{\begin{equation}}{\end{equation}\ignorespacesafterend}’. 12.13 xspace package ==================== Synopsis: \usepackage{xspace} ... \newcommand{...}{...\xspace} The ‘\xspace’ macro, when used at the end of a command definition, adds a space unless the command is followed by certain punctuation characters. After a command control sequence that is a control word (*note Control sequences::, as opposed to control symbols such as ‘\$’), TeX gobbles blank characters. Thus, in the first sentence below, the output has ‘Vermont’ placed snugly against the period, without any intervening space. \newcommand{\VT}{Vermont} Our college is in \VT . The \VT{} summers are nice. But because of the gobbling, the second sentence needs the empty curly braces or else there would be no space separating ‘Vermont’ from ‘summers’. (Many authors instead use a backslash-space ‘\ ’ for this. *Note \(SPACE)::.) The ‘xspace’ package provides ‘\xspace’. It is for writing commands which are designed to be used mainly in text. It must be placed at the very end of the definition of these commands. It inserts a space after that command unless what immediately follows is in a list of exceptions. In this example, the empty braces are not needed. \newcommand{\VT}{Vermont\xspace} Our college is in \VT . \VT summers are nice. The default exception list contains the characters ‘,.'/?;:!~-)’, the open curly brace and the backslash-space command discussed above, and the commands ‘\footnote’ or ‘\footnotemark’. Add to that list as with ‘\xspaceaddexceptions{\myfni \myfnii}’ which adds ‘\myfni’ and ‘\myfnii’ to the list, and remove from that list as with ‘\xspaceremoveexception{!}’. A comment: many experts prefer not to use ‘\xspace’. Putting it in a definition means that the command will usually get the spacing right. But it isn’t easy to predict when to enter empty braces because ‘\xspace’ will get it wrong, such as when it is followed by another command, and so ‘\xspace’ can make editing material harder and more error-prone than instead always inserting the empty braces. 13 Counters *********** Everything LaTeX numbers for you has a counter associated with it. The name of the counter is often the same as the name of the environment or command associated with the number, except that the counter’s name has no backslash ‘\’. Thus, associated with the ‘\chapter’ command is the ‘chapter’ counter that keeps track of the chapter number. Below is a list of the counters used in LaTeX’s standard document classes to control numbering. part paragraph figure enumi chapter subparagraph table enumii section page footnote enumiii subsection equation mpfootnote enumiv subsubsection The ‘mpfootnote’ counter is used by the ‘\footnote’ command inside of a minipage (*note minipage::). The counters ‘enumi’ through ‘enumiv’ are used in the ‘enumerate’ environment, for up to four levels of nesting (*note enumerate::). Counters can have any integer value but they are typically positive. New counters are created with ‘\newcounter’. *Note \newcounter::. 13.1 ‘\alph \Alph \arabic \roman \Roman \fnsymbol’: Printing counters ===================================================================== Print the value of a counter, in a specified style. For instance, if the counter COUNTER has the value 1 then a ‘\alph{COUNTER}’ in your source will result in a lowercase letter a appearing in the output. All of these commands take a single counter as an argument, for instance, ‘\alph{enumi}’. Note that the counter name does not start with a backslash. ‘\alph{COUNTER}’ Print the value of COUNTER in lowercase letters: ‘a’, ‘b’, ... If the counter’s value is less than 1 or more than 26 then you get ‘LaTeX Error: Counter too large.’ ‘\Alph{COUNTER}’ Print in uppercase letters: ‘A’, ‘B’, ... If the counter’s value is less than 1 or more than 26 then you get ‘LaTeX Error: Counter too large.’ ‘\arabic{COUNTER}’ Print in Arabic numbers such as ‘5’ or ‘-2’. ‘\roman{COUNTER}’ Print in lowercase roman numerals: ‘i’, ‘ii’, ... If the counter’s value is less than 1 then you get no warning or error but LaTeX does not print anything in the output. ‘\Roman{COUNTER}’ Print in uppercase roman numerals: ‘I’, ‘II’, ... If the counter’s value is less than 1 then you get no warning or error but LaTeX does not print anything in the output. ‘\fnsymbol{COUNTER}’ Prints the value of COUNTER using a sequence of nine symbols that are traditionally used for labeling footnotes. The value of COUNTER should be between 1 and 9, inclusive. If the counter’s value is less than 0 or more than 9 then you get ‘LaTeX Error: Counter too large’, while if it is 0 then you get no error or warning but LaTeX does not output anything. Here are the symbols: Number Name Command Symbol ----------------------------------------------------------------------------- 1 asterisk ‘\ast’ * 2 dagger ‘\dagger’ † 3 ddagger ‘\ddagger’ ‡ 4 section-sign ‘\S’ § 5 paragraph-sign ‘\P’ ¶ 6 double-vert ‘\parallel’ ‖ 7 double-asterisk ‘\ast\ast’ ** 8 double-dagger ‘\dagger\dagger’ †† 9 double-ddagger ‘\ddagger\ddagger’ ‡‡ 13.2 ‘\usecounter’ ================== Synopsis: \usecounter{COUNTER} Used in the second argument of the ‘list’ environment (*note list::), this declares that list items will be numbered by COUNTER. It initializes COUNTER to zero, and arranges that when ‘\item’ is called without its optional argument then COUNTER is incremented by ‘\refstepcounter’, making its value be the current ‘ref’ value (*note \ref::). This command is fragile (*note \protect::). Put in the document preamble, this example makes a new list environment enumerated with TESTCOUNTER: \newcounter{testcounter} \newenvironment{test}{% \begin{list}{}{% \usecounter{testcounter} } }{% \end{list} } 13.3 ‘\value’ ============= Synopsis: \value{COUNTER} Expands to the value of the counter COUNTER. (Note that the name of a counter does not begin with a backslash.) This example outputs ‘Test counter is 6. Other counter is 5.’. \newcounter{test} \setcounter{test}{5} \newcounter{other} \setcounter{other}{\value{test}} \addtocounter{test}{1} Test counter is \arabic{test}. Other counter is \arabic{other}. The ‘\value’ command is not used for typesetting the value of the counter. For that, see *note \alph \Alph \arabic \roman \Roman \fnsymbol::. It is often used in ‘\setcounter’ or ‘\addtocounter’ but ‘\value’ can be used anywhere that LaTeX expects a number, such as in ‘\hspace{\value{foo}\parindent}’. It must not be preceded by ‘\protect’ (*note \protect::). This example inserts ‘\hspace{4\parindent}’. \setcounter{myctr}{3} \addtocounter{myctr}{1} \hspace{\value{myctr}\parindent} 13.4 ‘\setcounter’ ================== Synopsis: \setcounter{COUNTER}{VALUE} Globally set the counter COUNTER to have the value of the VALUE argument, which must be an integer. Thus, you can set a counter’s value as ‘\setcounter{section}{5}’. Note that the counter name does not start with a backslash. In this example if the counter ‘theorem’ has value 12 then the second line will print ‘XII’. \setcounter{exercise}{\value{theorem}} Here it is in Roman: \Roman{exercise}. 13.5 ‘\addtocounter’ ==================== Synopsis: \addtocounter{COUNTER}{VALUE} Globally increment COUNTER by the amount specified by the VALUE argument, which may be negative. In this example the section value appears as ‘VII’. \setcounter{section}{5} \addtocounter{section}{2} Here it is in Roman: \Roman{section}. 13.6 ‘\refstepcounter’ ====================== Synopsis: \refstepcounter{COUNTER} Globally increments the value of COUNTER by one, as does ‘\stepcounter’ (*note \stepcounter::). The difference is that this command resets the value of any counter numbered within it. (For the definition of “counters numbered within”, *note \newcounter::.) In addition, this command also defines the current ‘\ref’ value to be the result of ‘\thecounter’. While the counter value is set globally, the ‘\ref’ value is set locally, i.e., inside the current group. 13.7 ‘\stepcounter’ =================== Synopsis: \stepcounter{COUNTER} Globally adds one to COUNTER and resets all counters numbered within it. (For the definition of “counters numbered within”, *note \newcounter::.) This command differs from ‘\refstepcounter’ in that this one does not influence references; that is, it does not define the current ‘\ref’ value to be the result of ‘\thecounter’ (*note \refstepcounter::). 13.8 ‘\day’ & ‘\month’ & ‘\year’ ================================ LaTeX defines the counter ‘\day’ for the day of the month (nominally with value between 1 and 31), ‘\month’ for the month of the year (nominally with value between 1 and 12), and ‘\year’ for the year. When TeX starts up, they are set from the current values on the system. The related command ‘\today’ produces a string representing the current day (*note \today::). They counters are not updated as the job progresses so in principle they could be incorrect by the end. In addition, TeX does no sanity check: \day=-2 \month=13 \year=-4 \today gives no error or warning and results in the output ‘-2, -4’ (the bogus month value produces no output). *Note Command line input::, to force the date to a given value from the command line. 14 Lengths ********** A “length” is a measure of distance. Many LaTeX commands take a length as an argument. Lengths come in two types. A “rigid length” such as ‘10pt’ does not contain a ‘plus’ or ‘minus’ component. (Plain TeX calls this a “dimen”.) A “rubber length” (what plain TeX calls a “skip” or “glue”) such as with ‘1cm plus0.05cm minus0.01cm’ can contain either or both of those components. In that rubber length, the ‘1cm’ is the “natural length” while the other two, the ‘plus’ and ‘minus’ components, allow TeX to stretch or shrink the length to optimize placement. The illustrations below use these two commands. % make a black bar 10pt tall and #1 wide \newcommand{\blackbar}[1]{\rule{#1}{10pt}} % Make a box around #2 that is #1 wide (excluding the border) \newcommand{\showhbox}[2]{% \fboxsep=0pt\fbox{\hbox to #1{#2}}} This example uses those commands to show a black bar 100 points long between ‘XXX’ and ‘YYY’. This length is rigid. XXX\showhbox{100pt}{\blackbar{100pt}}YYY As for rubber lengths, shrinking is simpler one: with ‘1cm minus 0.05cm’, the natural length is 1cm but TeX can shrink it down as far as 0.95cm. Beyond that, TeX refuses to shrink any more. Thus, below the first one works fine, producing a space of 98 points between the two bars. XXX\showhbox{300pt}{% \blackbar{101pt}\hspace{100pt minus 2pt}\blackbar{101pt}}YYY XXX\showhbox{300pt}{% \blackbar{105pt}\hspace{100pt minus 1pt}\blackbar{105pt}}YYY But the second one gets a warning like ‘Overfull \hbox (1.0pt too wide) detected at line 17’. In the output the first ‘Y’ is overwritten by the end of the black bar, because the box’s material is wider than the 300pt allocated, as TeX has refused to shrink the total to less than 309 points. Stretching is like shrinking except that if TeX is asked to stretch beyond the given amount, it will do it. Here the first line is fine, producing a space of 110 points between the bars. XXX\showhbox{300pt}{% \blackbar{95pt}\hspace{100pt plus 10pt}\blackbar{95pt}}YYY XXX\showhbox{300pt}{% \blackbar{95pt}\hspace{100pt plus 1pt}\blackbar{95pt}}YYY In the second line TeX needs a stretch of 10 points and only 1 point was specified. TeX stretches the space to the required length but it gives you a warning like ‘Underfull \hbox (badness 10000) detected at line 22’. (We won’t discuss badness.) You can put both stretch and shrink in the same length, as in ‘1ex plus 0.05ex minus 0.02ex’. If TeX is setting two or more rubber lengths then it allocates the stretch or shrink in proportion. XXX\showhbox{300pt}{% \blackbar{100pt}% left \hspace{0pt plus 50pt}\blackbar{80pt}\hspace{0pt plus 10pt}% middle \blackbar{100pt}}YYY % right The left and right bars take up 100 points, so the middle needs another 100. The middle bar is 80 points so the two ‘\hspace’’s must stretch 20 points. Because the two are ‘plus 50pt’ and ‘plus 10pt’, TeX gets 5/6 of the stretch from the first space and 1/6 from the second. The ‘plus’ or ‘minus’ component of a rubber length can contain a “fill” component, as in ‘1in plus2fill’. This gives the length infinite stretchability or shrinkability so that TeX could set it to any distance. Here the two figures will be equal-spaced across the page. \begin{minipage}{\linewidth} \hspace{0pt plus 1fill}\includegraphics{godel.png}% \hspace{0pt plus 1fill}\includegraphics{einstein.png}% \hspace{0pt plus 1fill} \end{minipage} TeX has three levels of infinity for glue components: ‘fil’, ‘fill’, and ‘filll’. The later ones are more infinite than the earlier ones. Ordinarily document authors only use the middle one (*note \hfill:: and *note \vfill::). Multiplying a rubber length by a number turns it into a rigid length, so that after ‘\setlength{\ylength}{1in plus 0.2in}’ and ‘\setlength{\zlength}{3\ylength}’ then the value of ‘\zlength’ is ‘3in’. 14.1 Units of length ==================== TeX and LaTeX know about these units both inside and outside of math mode. ‘pt’ Point, 1/72.27 inch. The (approximate) conversion to metric units is 1point = .35146mm = .035146cm. ‘pc’ Pica, 12 pt ‘in’ Inch, 72.27 pt ‘bp’ Big point, 1/72 inch. This length is the definition of a point in PostScript and many desktop publishing systems. ‘mm’ Millimeter, 2.845pt ‘cm’ Centimeter, 10mm ‘dd’ Didot point, 1.07 pt ‘cc’ Cicero, 12 dd ‘sp’ Scaled point, 1/65536 pt Three other units are defined according to the current font, rather than being an absolute dimension. ‘ex’ The x-height of the current font “ex”, traditionally the height of the lowercase letter x, is often used for vertical lengths. ‘em’ Similarly “em”, traditionally the width of the capital letter M, is often used for horizontal lengths. This is also often the size of the current font, e.g., a nominal 10pt font will have 1em = 10pt. LaTeX has several commands to produce horizontal spaces based on the em (*note \enspace & \quad & \qquad::). ‘mu’ Finally, in math mode, many definitions are expressed in terms of the math unit “mu”, defined by 1em = 18mu, where the em is taken from the current math symbols family. *Note Spacing in math mode::. Using these units can help make a definition work better across font changes. For example, a definition of the vertical space between list items given as ‘\setlength{\itemsep}{1ex plus 0.05ex minus 0.01ex}’ is more likely to still be reasonable if the font is changed than a definition given in points. 14.2 ‘\setlength’ ================= Synopsis: \setlength{\LEN}{AMOUNT} Set the length \LEN to AMOUNT. The length name ‘\LEN’ has to be a control sequence (*note Control sequences::), and as such must begin with a backslash, ‘\’ under normal circumstances. The AMOUNT can be a rubber length (*note Lengths::). It can be positive, negative or zero, and can be in any units that LaTeX understands (*note Units of length::). Below, with LaTeX’s defaults the first paragraph will be indented while the second will not. I told the doctor I broke my leg in two places. \setlength{\parindent}{0em} He said stop going to those places. If you did not declare \LEN with ‘\newlength’, for example if you mistype it as in ‘\newlength{\specparindent}\setlength{\sepcparindent}{...}’, then you get an error like ‘Undefined control sequence. \sepcindent’. If you omit the backslash at the start of the length name then you get an error like ‘Missing number, treated as zero.’. 14.3 ‘\addtolength’ =================== Synopsis: \addtolength{\LEN}{AMOUNT} Increment the length \LEN by AMOUNT. The length name ‘\LEN’ has to be a control sequence (*note Control sequences::), and as such must begin with a backslash, ‘\’ under normal circumstances. The AMOUNT is a rubber length (*note Lengths::). It can be positive, negative or zero, and can be in any units that LaTeX understands (*note Units of length::). Below, if ‘\parskip’ starts with the value ‘0pt plus 1pt’ Doctor: how is the boy who swallowed the silver dollar? \addtolength{\parskip}{1pt} Nurse: no change. then it has the value ‘1pt plus 1pt’ for the second paragraph. If you did not declare \LEN with ‘\newlength’, for example if you mistype it as in ‘\newlength{\specparindent}\addtolength{\sepcparindent}{...}’, then you get an error like ‘Undefined control sequence. \sepcindent’. If the AMOUNT uses some length that has not been declared, for instance if for example you mistype the above as ‘\addtolength{\specparindent}{0.6\praindent}’, then you get something like ‘Undefined control sequence. \praindent’. If you leave off the backslash at the start of \LEN, as in ‘\addtolength{parindent}{1pt}’, then you get something like ‘You can't use `the letter p' after \advance’. 14.4 ‘\settodepth’ ================== Synopsis: \settodepth{\LEN}{TEXT} Set the length \LEN to the depth of box that LaTeX gets on typesetting the TEXT argument. The length name ‘\LEN’ has to be a control sequence (*note Control sequences::), and as such must begin with a backslash, ‘\’ under normal circumstances. This will print how low the character descenders go. \newlength{\alphabetdepth} \settodepth{\alphabetdepth}{abcdefghijklmnopqrstuvwxyz} \the\alphabetdepth If you did not declare \LEN with ‘\newlength’, if for example you mistype the above as ‘\settodepth{\aplhabetdepth}{abc...}’, then you get something like ‘Undefined control sequence. \aplhabetdepth’. If you leave the backslash out of \LEN, as in ‘\settodepth{alphabetdepth}{...}’ then you get something like ‘Missing number, treated as zero. \setbox’. 14.5 ‘\settoheight’ =================== Synopsis: \settoheight{\LEN}{text} Sets the length \LEN to the height of box that LaTeX gets on typesetting the ‘text’ argument. The length name ‘\LEN’ has to be a control sequence (*note Control sequences::), and as such must begin with a backslash, ‘\’ under normal circumstances. This will print how high the characters go. \newlength{\alphabetheight} \settoheight{\alphabetheight}{abcdefghijklmnopqrstuvwxyz} \the\alphabetheight If no such length \LEN has been declared with ‘\newlength’, if for example you mistype as ‘\settoheight{\aplhabetheight}{abc...}’, then you get something like ‘Undefined control sequence. \alphabetheight’. If you leave the backslash out of \LEN, as in ‘\settoheight{alphabetheight}{...}’ then you get something like ‘Missing number, treated as zero. \setbox’. 14.6 ‘\settowidth’ ================== Synopsis: \settowidth{\LEN}{TEXT} Set the length \LEN to the width of the box that LaTeX gets on typesetting the TEXT argument. The length name ‘\LEN’ has to be a control sequence (*note Control sequences::), and as such must begin with a backslash, ‘\’ under normal circumstances. This prints the width of the lowercase ASCII alphabet. \newlength{\alphabetwidth} \settowidth{\alphabetwidth}{abcdefghijklmnopqrstuvwxyz} \the\alphabetwidth If no such length \LEN has been declared with ‘\newlength’, if for example you mistype the above as ‘\settowidth{\aplhabetwidth}{abc...}’, then you get something like ‘Undefined control sequence. \aplhabetwidth’. If you leave the backslash out of \LEN, as in ‘\settoheight{alphabetwidth}{...}’ then you get something like ‘Missing number, treated as zero. \setbox’. 14.7 ‘\stretch’ =============== Synopsis: \stretch{NUMBER} Produces a rubber length with zero natural length and NUMBER times ‘\fill’ units of stretchability (*note Lengths::). The NUMBER can be positive or negative. This command is robust (*note \protect::). It works for both vertical and horizontal spacing. In this horizontal example, LaTeX produces three tick marks, and the distance between the first and second is half again as long as the distance between the second and third. \rule{0.4pt}{1ex}\hspace{\stretch{1.5}}% \rule{0.4pt}{1ex}\hspace{\stretch{1}}% \rule{0.4pt}{1ex} In this vertical example, the ‘We dedicate ...’ will have three times as much space under it as above it. \newenvironment{dedication}{% in document preamble \clearpage\thispagestyle{empty}% \vspace*{\stretch{1}} % stretchable space at top \it }{% \vspace{\stretch{3}} % space at bot is 3x as at top \clearpage } ... \begin{dedication} % in document body We dedicate this book to our wives. \end{dedication} 14.8 Expressions ================ Synopsis, one of: \numexpr EXPRESSION \dimexpr EXPRESSION \glueexpr EXPRESSION \muglue EXPRESSION Any place where you may write an integer, or a TeX dimen, or TeX glue, or muglue, you can instead write an expression to compute that type of quantity. An example is that ‘\the\dimexpr\linewidth-4pt\relax’ will produce as output the length that is four points less than width of a line (the only purpose of ‘\the’ is to show the result in the document). Analogously, ‘\romannumeral\numexpr6+3\relax’ will produce ‘ix’, and ‘\the\glueexpr 5pt plus 1pt * 2 \relax’ will produce ‘10.0pt plus 2.0pt’. A convenience here over doing calculations by allocating registers and then using ‘\advance’, etc., is that the evaluation of expressions does not involve assignments and can therefore be performed in places where assignments are not allowed. The next example computes the width of the ‘\parbox’. \newlength{\offset}\setlength{\offset}{2em} \begin{center} \parbox{\dimexpr\linewidth-\offset*3}{With malice toward none with charity for all with firmness in the right as God gives us to see the right let us strive on to finish the work we are in to bind up the nation's wounds, to care for him who shall have borne the battle and for his widow and his orphan \textasciitilde\ to do all which may achieve and cherish a just and lasting peace among ourselves and with all nations. ---Abraham Lincoln, Second Inaugural Address, from the memorial} \end{center} The EXPRESSION consists of one or more terms of the same type (integer, dimension, etc.) that are added or subtracted. A term that is a type of number, dimension, etc., consists of a factor of that type, optionally multiplied or divided by factors. A factor of a type is either a quantity of that type or a parenthesized subexpression. The expression produces a result of the given type, so that ‘\numexpr’ produces an integer, ‘\dimexpr’ produces a dimension, etc. In the quotation example above, changing to ‘\dimexpr\linewidth-3*\offset’ gives the error ‘Illegal unit of measure (pt inserted)’. This is because for ‘\dimexpr’ and ‘\glueexpr’, the input consists of a dimension or glue value followed by an optional multiplication factor, and not the other way around. Thus ‘\the\dimexpr 1pt*10\relax’ is valid and produces ‘10.0pt’, but ‘\the\dimexpr 10*1pt\relax’ gives the ‘Illegal unit’ error. The expressions absorb tokens and carry out appropriate mathematics up to a ‘\relax’ (which will be absorbed), or up to the first non-valid token. Thus, ‘\the\numexpr2+3px’ will print ‘5px’, because LaTeX reads the ‘\numexpr2+3’, which is made up of numbers, and then finds the letter ‘p’, which cannot be part of a number. It therefore terminates the expression and produces the ‘5’, followed by the regular text ‘px’. This termination behavior is useful in comparisons. In ‘\ifnum\numexpr\parindent*2 < 10pt Yes\else No\fi’, the less than sign terminates the expression and the result is ‘No’ (in a standard LaTeX article). Expressions may use the operators ‘+’, ‘-’, ‘*’ and ‘/’ along with parentheses for subexpressions, ‘(...)’. In glue expressions the ‘plus’ and ‘minus’ parts do not need parentheses to be affected by a factor. So ‘\the\glueexpr 5pt plus 1pt * 2 \relax’ results in ‘10pt plus 2pt’. TeX will coerce other numerical types in the same way as it does when doing register assignment. Thus ‘\the\numexpr\dimexpr 1pt\relax\relax’ will result in ‘65536’, which is ‘1pt’ converted to scaled points (*note ‘sp’: units of length sp, TeX’s internal unit) and then coerced into an integer. With a ‘\glueexpr’ here, the stretch and shrink would be dropped. Going the other way, a ‘\numexpr’ inside a ‘\dimexpr’ or ‘\glueexpr’ will need appropriate units, as in ‘\the\dimexpr\numexpr 1 + 2\relax pt\relax’, which produces ‘3.0pt’. The details of the arithmetic: each factor is checked to be in the allowed range, numbers must be less than 2^{31} in absolute value, and dimensions or glue components must be less than 2^{14} points, or ‘mu’, or ‘fil’, etc. The arithmetic operations are performed individually, except for a scaling operation (a multiplication immediately followed by a division) which is done as one combined operation with a 64-bit product as intermediate value. The result of each operation is again checked to be in the allowed range. Finally, division and scaling take place with rounding (unlike TeX’s ‘\divide’, which truncates). Thus ‘\the\dimexpr 5pt*(3/2)\relax’ puts ‘10.0pt’ in the document, because it rounds ‘3/2’ to ‘2’, while ‘\the\dimexpr 5pt*(4/3)\relax’ produces ‘5.0pt’. 15 Making paragraphs ******************** To start a paragraph, just type some text. To end the current paragraph, put an empty line. This is three paragraphs, the separation of which is made by two empty lines. It is a truth universally acknowledged, that a single man in possession of a good fortune, must be in want of a wife. However little known the feelings or views of such a man may be on his first entering a neighbourhood, this truth is so well fixed in the minds of the surrounding families, that he is considered the rightful property of some one or other of their daughters. ``My dear Mr. Bennet,'' said his lady to him one day, ``have you heard that Netherfield Park is let at last?'' A paragraph separator can be made of a sequence of at least one blank line, at least one of which is not terminated by a comment. A blank line is a line that is empty or made only of blank characters such as space or tab. Comments in source code are started with a ‘%’ and span up to the end of line. In the following example the two columns are identical: \documentclass[twocolumn]{article} \begin{document} First paragraph. Second paragraph. \newpage First paragraph. % separator lines may contain blank characters. Second paragraph. \end{document} Once LaTeX has gathered all of a paragraph’s contents it divides that content into lines in a way that is optimized over the entire paragraph (*note Line breaking::). There are places where a new paragraph is not permitted. Don’t put a blank line in math mode (*note Modes::); here the blank line before the ‘\end{equation}’ \begin{equation} 2^{|S|} > |S| \end{equation} will get you the error ‘Missing $ inserted’. Similarly, the blank line in this ‘\section’ argument \section{aaa bbb} gets ‘Runaway argument? {aaa ! Paragraph ended before \@sect was complete’. 15.1 ‘\par’ =========== Synopsis (note that while reading the input TeX converts any sequence of one or more blank lines to a ‘\par’, *note Making paragraphs::): \par End the current paragraph. The usual way to separate paragraphs is with a blank line but the ‘\par’ command is entirely equivalent. This command is robust (*note \protect::). This example uses ‘\par’ rather than a blank line simply for readability. \newcommand{\syllabusLegalese}{% \whatCheatingIs\par\whatHappensWhenICatchYou} In LR mode the ‘\par’ command does nothing and is ignored. In paragraph mode, the ‘\par’ command terminates paragraph mode, switching LaTeX to vertical mode (*note Modes::). You cannot use the ‘\par’ command in a math mode. You also cannot use it in the argument of many commands, such as the sectioning commands, e.g. ‘\section’ (*note Making paragraphs:: and *note \newcommand & \renewcommand::). The ‘\par’ command is not the same as the ‘\paragraph’ command. The latter is, like ‘\section’ or ‘\subsection’, a sectioning command used by the LaTeX document standard classes (*note \subsubsection & \paragraph & \subparagraph::). The ‘\par’ command is not the same as ‘\newline’ or the line break double backslash, ‘\\’. The difference is that ‘\par’ ends the paragraph, not just the line, and also triggers the addition of the between-paragraph vertical space ‘\parskip’ (*note \parindent & \parskip::). The output from this example xyz \setlength{\parindent}{3in} \setlength{\parskip}{5in} \noindent test\indent test1\par test2 is: after ‘xyz’ there is a vertical skip of 5 inches and then ‘test’ appears, aligned with the left margin. On the same line, there is an empty horizontal space of 3 inches and then ‘test1’ appears. Finally. there is a vertical space of 5 inches, followed by a fresh paragraph with a paragraph indent of 3 inches, and then LaTeX puts the text ‘test2’. 15.2 ‘\indent’ & ‘\noindent’ ============================ Synopsis: \indent or \noindent Go into horizontal mode (*note Modes::). The ‘\indent’ command first outputs an empty box whose width is ‘\parindent’. These commands are robust (*note \protect::). Ordinarily you create a new paragraph by putting in a blank line. *Note \par::, for the difference between this command and ‘\par’. To start a paragraph without an indent, or to continue an interrupted paragraph, use ‘\noindent’. In the middle of a paragraph the ‘\noindent’ command has no effect, because LaTeX is already in horizontal mode there. The ‘\indent’ command’s only effect is to output a space. This example starts a fresh paragraph. ... end of the prior paragraph. \noindent This paragraph is not indented. and this continues an interrupted paragraph. The data \begin{center} \begin{tabular}{rl} ... \end{tabular} \end{center} \noindent shows this clearly. To omit indentation in the entire document put ‘\setlength{\parindent}{0pt}’ in the preamble. If you do that, you may want to also set the length of spaces between paragraphs, ‘\parskip’ (*note \parindent & \parskip::). Default LaTeX styles have the first paragraph after a section that is not indented, as is traditional typesetting in English. To change that, look on CTAN for the package ‘indentfirst’. 15.3 ‘\parindent’ & ‘\parskip’ ============================== Synopsis: \setlength{\parindent}{HORIZONTAL LEN} \setlength{\parskip}{VERTICAL LEN} Both are rubber lengths (*note Lengths::). They affect the indentation of ordinary paragraphs, not paragraphs inside minipages (*note minipage::), and the vertical space between paragraphs, respectively. For example, if this is put in the preamble: \setlength{\parindent}{0em} \setlength{\parskip}{1ex} The document will have paragraphs that are not indented, but instead are vertically separated by about the height of a lowercase ‘x’. In LaTeX standard class documents, the default value for ‘\parindent’ in one-column documents is ‘15pt’ when the default text size is ‘10pt’, ‘17pt’ for ‘11pt’, and ‘1.5em’ for ‘12pt’. In two-column documents it is ‘1em’. (These values are set before LaTeX calls ‘\normalfont’ so ‘em’ is derived from the default font, Computer Modern. If you use a different font then to set ‘\parindent’ to 1em matching that font, put ‘\AtBeginDocument{\setlength{\parindent}{1em}}’ in the preamble.) The default value for ‘\parskip’ in LaTeX’s standard document classes is ‘0pt plus1pt’. 15.4 Marginal notes =================== Synopsis, one of: \marginpar{RIGHT} \marginpar[LEFT]{RIGHT} Create a note in the margin. The first line of the note will have the same baseline as the line in the text where the ‘\marginpar’ occurs. The margin that LaTeX uses for the note depends on the current layout (*note Document class options::) and also on ‘\reversemarginpar’ (see below). If you are using one-sided layout (document option ‘oneside’) then it goes in the right margin. If you are using two-sided layout (document option ‘twoside’) then it goes in the outside margin. If you are in two-column layout (document option ‘twocolumn’) then it goes in the nearest margin. If you declare ‘\reversemarginpar’ then LaTeX will place subsequent marginal notes in the opposite margin to that given in the prior paragraph. Revert that to the default position with ‘\normalmarginpar’. When you specify the optional argument LEFT then it is used for a note in the left margin, while the mandatory argument RIGHT is used for a note in the right margin. Normally, a note’s first word will not be hyphenated. You can enable hyphenation there by beginning LEFT or RIGHT with ‘\hspace{0pt}’. These parameters affect the formatting of the note: ‘\marginparpush’ Minimum vertical space between notes; default ‘7pt’ for ‘12pt’ documents, ‘5pt’ else. See also *note page layout parameters marginparpush::. ‘\marginparsep’ Horizontal space between the main text and the note; default ‘11pt’ for ‘10pt’ documents, ‘10pt’ else. ‘\marginparwidth’ Width of the note itself; default for a one-sided ‘10pt’ document is ‘90pt’, ‘83pt’ for ‘11pt’, and ‘68pt’ for ‘12pt’; ‘17pt’ more in each case for a two-sided document. In two column mode, the default is ‘48pt’. The standard LaTeX routine for marginal notes does not prevent notes from falling off the bottom of the page. 16 Math formulas **************** Produce mathematical text by putting LaTeX into math mode or display math mode (*note Modes::). This example shows both. The wave equation for \( u \) is \begin{displaymath} \frac{\partial^2u}{\partial t^2} = c^2\nabla^2u \end{displaymath} where \( \nabla^2 \) is the spatial Laplacian and \( c \) is constant. Math mode is for inline mathematics. In the above example it is invoked by the starting ‘\(’ and finished by the matching ending ‘\)’. Display math mode is for displayed equations and here is invoked by the ‘displaymath’ environment. Note that any mathematical text whatever, including mathematical text consisting of just one character, is handled in math mode. When in math mode or display math mode, LaTeX handles many aspects of your input text differently than in other text modes. For example, contrast x+y with \( x+y \) in math mode the letters are in italics and the spacing around the plus sign is different. There are three ways to make inline formulas, to put LaTeX in math mode. \( MATHEMATICAL MATERIAL \) $ MATHEMATICAL MATERIAL $ \begin{math} MATHEMATICAL MATERIAL \end{math} The first form is preferred and the second is quite common, but the third form is rarely used. You can sometimes use one and sometimes another, as in ‘\(x\) and $y$’. You can use these in paragraph mode or in LR mode (*note Modes::). To make displayed formulas, put LaTeX into display math mode with either: \begin{displaymath} MATHEMATICAL MATERIAL \end{displaymath} or \begin{equation} MATHEMATICAL MATERIAL \end{equation} (*note displaymath::, *note equation::). The only difference is that with the ‘equation’ environment, LaTeX puts a formula number alongside the formula. The construct ‘\[ MATH \]’ is equivalent to ‘\begin{displaymath} MATH \end{displaymath}’. These environments can only be used in paragraph mode (*note Modes::). The American Mathematical Society has made freely available a set of packages that greatly expand your options for writing mathematics, ‘amsmath’ and ‘amssymb’ (also be aware of the ‘mathtools’ package that is an extension to, and loads, ‘amsmath’). New documents that will have mathematical text should use these packages. Descriptions of these packages is outside the scope of this document; see their documentation on CTAN. 16.1 Subscripts & superscripts ============================== Synopsis (in math mode or display math mode), one of: BASE^EXP BASE^{EXP} or, one of: BASE_EXP BASE_{EXP} Make EXP appear as a superscript of BASE (with the caret character, ‘^’) or a subscript (with underscore, ‘_’). In this example the ‘0’’s and ‘1’’s are subscripts while the ‘2’’s are superscripts. \( (x_0+x_1)^2 \leq (x_0)^2+(x_1)^2 \) To have the subscript or superscript contain more than one character, surround the expression with curly braces, as in ‘e^{-2x}’. This example’s fourth line shows curly braces used to group an expression for the exponent. \begin{displaymath} (3^3)^3=27^3=19\,683 \qquad 3^{(3^3)}=3^{27}=7\,625\,597\,484\,987 \end{displaymath} LaTeX knows how to handle a superscript on a superscript, or a subscript on a subscript, or supers on subs, or subs on supers. So, expressions such as ‘e^{x^2}’ and ‘x_{i_0}’ give correct output. Note the use in those expressions of curly braces to give the BASE a determined EXP. If you enter ‘\(3^3^3\)’, this interpreted as ‘\(3^{3}^{3}\)’ and then you get TeX error ‘Double superscript’. LaTeX does the right thing when something has both a subscript and a superscript. In this example the integral has both. They come out in the correct place without any author intervention. \begin{displaymath} \int_{x=a}^b f'(x)\,dx = f(b)-f(a) \end{displaymath} Note the curly braces around ‘x=a’ to make the entire expression a subscript. To put a superscript or subscript before a symbol, use a construct like ‘{}_t K^2’. The empty curly braces ‘{}’ give the subscript something to attach to and keeps it from accidentally attaching to a prior symbols. Using the subscript or superscript character outside of math mode or display math mode, as in ‘the expression x^2’, will get you the TeX error ‘Missing $ inserted’. A common reason to want subscripts outside of a mathematics mode is to typeset chemical formulas. There are packages for that, such as ‘mhchem’; see CTAN. 16.2 Math symbols ================= LaTeX provides almost any mathematical or technical symbol that anyone uses. For example, if you include ‘$\pi$’ in your source, you will get the pi symbol π. See the “Comprehensive LaTeX Symbol List” package at . Here is a list of commonly-used symbols. It is by no means exhaustive. Each symbol is described with a short phrase, and its symbol class, which determines the spacing around it, is given in parenthesis. Unless said otherwise, the commands for these symbols can be used only in math mode. To redefine a command so that it can be used whatever the current mode, see *note \ensuremath::. ‘\|’ ∥ Parallel (relation). Synonym: ‘\parallel’. ‘\aleph’ ℵ Aleph, transfinite cardinal (ordinary). ‘\alpha’ α Lowercase Greek letter alpha (ordinary). ‘\amalg’ ⨿ Disjoint union (binary) ‘\angle’ ∠ Geometric angle (ordinary). Similar: less-than sign ‘<’ and angle bracket ‘\langle’. ‘\approx’ ≈ Almost equal to (relation). ‘\ast’ ∗ Asterisk operator, convolution, six-pointed (binary). Synonym: ‘*’, which is often a superscript or subscript, as in the Kleene star. Similar: ‘\star’, which is five-pointed, and is sometimes used as a general binary operation, and sometimes reserved for cross-correlation. ‘\asymp’ ≍ Asymptotically equivalent (relation). ‘\backslash’ \ Backslash (ordinary). Similar: set minus ‘\setminus’, and ‘\textbackslash’ for backslash outside of math mode. ‘\beta’ β Lowercase Greek letter beta (ordinary). ‘\bigcap’ ⋂ Variable-sized, or n-ary, intersection (operator). Similar: binary intersection ‘\cap’. ‘\bigcirc’ ⚪ Circle, larger (binary). Similar: function composition ‘\circ’. ‘\bigcup’ ⋃ Variable-sized, or n-ary, union (operator). Similar: binary union ‘\cup’. ‘\bigodot’ ⨀ Variable-sized, or n-ary, circled dot operator (operator). ‘\bigoplus’ ⨁ Variable-sized, or n-ary, circled plus operator (operator). ‘\bigotimes’ ⨂ Variable-sized, or n-ary, circled times operator (operator). ‘\bigtriangledown’ ▽ Variable-sized, or n-ary, open triangle pointing down (binary). Synonym: \VARBIGTRIANGLEDOWN. ‘\bigtriangleup’ △ Variable-sized, or n-ary, open triangle pointing up (binary). Synonym: \VARBIGTRIANGLEUP. ‘\bigsqcup’ ⨆ Variable-sized, or n-ary, square union (operator). ‘\biguplus’ ⨄ Variable-sized, or n-ary, union operator with a plus (operator). (Note that the name has only one p.) ‘\bigvee’ ⋁ Variable-sized, or n-ary, logical-or (operator). ‘\bigwedge’ ⋀ Variable-sized, or n-ary, logical-and (operator). ‘\bot’ ⊥, Up tack, bottom, least element of a partially ordered set, or a contradiction (ordinary). See also ‘\top’. ‘\bowtie’ ⋈ Natural join of two relations (relation). ‘\Box’ □ Modal operator for necessity; square open box (ordinary). Not available in plain TeX. In LaTeX you need to load the ‘amssymb’ package. ‘\bullet’ • Bullet (binary). Similar: multiplication dot ‘\cdot’. ‘\cap’ ∩ Intersection of two sets (binary). Similar: variable-sized operator ‘\bigcap’. ‘\cdot’ ⋅ Multiplication (binary). Similar: Bullet dot ‘\bullet’. ‘\chi’ χ Lowercase Greek chi (ordinary). ‘\circ’ ∘ Function composition, ring operator (binary). Similar: variable-sized operator ‘\bigcirc’. ‘\clubsuit’ ♣ Club card suit (ordinary). ‘\complement’ ∁, Set complement, used as a superscript as in ‘$S^\complement$’ (ordinary). Not available in plain TeX. In LaTeX you need to load the ‘amssymb’ package. Also used: ‘$S^{\mathsf{c}}$’ or ‘$\bar{S}$’. ‘\cong’ ≅ Congruent (relation). ‘\coprod’ ∐ Coproduct (operator). ‘\cup’ ∪ Union of two sets (binary). Similar: variable-sized operator ‘\bigcup’. ‘\dagger’ † Dagger relation (binary). ‘\dashv’ ⊣ Dash with vertical, reversed turnstile (relation). Similar: turnstile ‘\vdash’. ‘\ddagger’ ‡ Double dagger relation (binary). ‘\Delta’ Δ Greek uppercase delta, used for increment (ordinary). ‘\delta’ δ Greek lowercase delta (ordinary). ‘\Diamond’ ◇ Large diamond operator (ordinary). Not available in plain TeX. In LaTeX you need to load the ‘amssymb’ package. ‘\diamond’ ⋄ Diamond operator (binary). Similar: large diamond ‘\Diamond’, circle bullet ‘\bullet’. ‘\diamondsuit’ ♢ Diamond card suit (ordinary). ‘\div’ ÷ Division sign (binary). ‘\doteq’ ≐ Approaches the limit (relation). Similar: geometrically equal to ‘\Doteq’. ‘\downarrow’ ↓ Down arrow, converges (relation). Similar: ‘\Downarrow’ double line down arrow. ‘\Downarrow’ ⇓ Double line down arrow (relation). Similar: ‘\downarrow’ single line down arrow. ‘\ell’ ℓ Lowercase cursive letter l (ordinary). ‘\emptyset’ ∅ Empty set symbol (ordinary). The variant form is ‘\varnothing’. ‘\epsilon’ ϵ Lowercase lunate epsilon (ordinary). Similar to Greek text letter. More widely used in mathematics is the script small letter epsilon ‘\varepsilon’ ε. Related: the set membership relation ‘\in’ ∈. ‘\equiv’ ≡ Equivalence (relation). ‘\eta’ η Lowercase Greek letter (ordinary). ‘\exists’ ∃ Existential quantifier (ordinary). ‘\flat’ ♭ Musical flat (ordinary). ‘\forall’ ∀ Universal quantifier (ordinary). ‘\frown’ ⌢ Downward curving arc (ordinary). ‘\Gamma’ Γ uppercase Greek letter (ordinary). ‘\gamma’ γ Lowercase Greek letter (ordinary). ‘\ge’ ≥ Greater than or equal to (relation). This is a synonym for ‘\geq’. ‘\geq’ ≥ Greater than or equal to (relation). This is a synonym for ‘\ge’. ‘\gets’ ← Is assigned the value (relation). Synonym: ‘\leftarrow’. ‘\gg’ ≫ Much greater than (relation). Similar: much less than ‘\ll’. ‘\hbar’ ℏ Planck constant over two pi (ordinary). ‘\heartsuit’ ♡ Heart card suit (ordinary). ‘\hookleftarrow’ ↩ Hooked left arrow (relation). ‘\hookrightarrow’ ↪ Hooked right arrow (relation). ‘\iff’ ⟷ If and only if (relation). It is ‘\Longleftrightarrow’ with a ‘\thickmuskip’ on either side. ‘\Im’ ℑ Imaginary part (ordinary). See: real part ‘\Re’. ‘\imath’ Dotless i; used when you are putting an accent on an i (*note Math accents::). ‘\in’ ∈ Set element (relation). See also: lowercase lunate epsilon ‘\epsilon’ϵ and small letter script epsilon ‘\varepsilon’. ‘\infty’ ∞ Infinity (ordinary). ‘\int’ ∫ Integral (operator). ‘\iota’ ι Lowercase Greek letter (ordinary). ‘\Join’ ⨝ Condensed bowtie symbol (relation). Not available in Plain TeX. ‘\jmath’ Dotless j; used when you are putting an accent on a j (*note Math accents::). ‘\kappa’ κ Lowercase Greek letter (ordinary). ‘\Lambda’ Λ uppercase Greek letter (ordinary). ‘\lambda’ λ Lowercase Greek letter (ordinary). ‘\land’ ∧ Logical and (binary). Synonym: ‘\wedge’. See also logical or ‘\lor’. ‘\langle’ ⟨ Left angle, or sequence, bracket (opening). Similar: less-than ‘<’. Matches ‘\rangle’. ‘\lbrace’ { Left curly brace (opening). Synonym: ‘\{’. Matches ‘\rbrace’. ‘\lbrack’ [ Left square bracket (opening). Synonym: ‘[’. Matches ‘\rbrack’. ‘\lceil’ ⌈ Left ceiling bracket, like a square bracket but with the bottom shaved off (opening). Matches ‘\rceil’. ‘\le’ ≤ Less than or equal to (relation). This is a synonym for ‘\leq’. ‘\leadsto’ ⇝ Squiggly right arrow (relation). To get this symbol outside of math mode you can put ‘\newcommand*{\Leadsto}{\ensuremath{\leadsto}}’ in the preamble and then use ‘\Leadsto’ instead. ‘\Leftarrow’ ⇐ Is implied by, double-line left arrow (relation). Similar: single-line left arrow ‘\leftarrow’. ‘\leftarrow’ ← Single-line left arrow (relation). Synonym: ‘\gets’. Similar: double-line left arrow ‘\Leftarrow’. ‘\leftharpoondown’ ↽ Single-line left harpoon, barb under bar (relation). ‘\leftharpoonup’ ↼ Single-line left harpoon, barb over bar (relation). ‘\Leftrightarrow’ ⇔ Bi-implication; double-line double-headed arrow (relation). Similar: single-line double headed arrow ‘\leftrightarrow’. ‘\leftrightarrow’ ↔ Single-line double-headed arrow (relation). Similar: double-line double headed arrow ‘\Leftrightarrow’. ‘\leq’ ≤ Less than or equal to (relation). This is a synonym for ‘\le’. ‘\lfloor’ ⌊ Left floor bracket (opening). Matches: ‘\floor’. ‘\lhd’ ◁ Arrowhead, that is, triangle, pointing left (binary). For the normal subgroup symbol you should load ‘amssymb’ and use ‘\vartriangleleft’ (which is a relation and so gives better spacing). ‘\ll’ ≪ Much less than (relation). Similar: much greater than ‘\gg’. ‘\lnot’ ¬ Logical negation (ordinary). Synonym: ‘\neg’. ‘\longleftarrow’ ⟵ Long single-line left arrow (relation). Similar: long double-line left arrow ‘\Longleftarrow’. ‘\longleftrightarrow’ ⟷ Long single-line double-headed arrow (relation). Similar: long double-line double-headed arrow ‘\Longleftrightarrow’. ‘\longmapsto’ ⟼ Long single-line left arrow starting with vertical bar (relation). Similar: shorter version ‘\mapsto’. ‘\longrightarrow’ ⟶ Long single-line right arrow (relation). Similar: long double-line right arrow ‘\Longrightarrow’. ‘\lor’ ∨ Logical or (binary). Synonym: ‘\vee’. See also logical and ‘\land’. ‘\mapsto’ ↦ Single-line left arrow starting with vertical bar (relation). Similar: longer version ‘\longmapsto’. ‘\mho’ ℧ Conductance, half-circle rotated capital omega (ordinary). ‘\mid’ ∣ Single-line vertical bar (relation). A typical use of ‘\mid’ is for a set ‘\{\, x \mid x\geq 5 \,\}’. Similar: ‘\vert’ and ‘|’ produce the same single-line vertical bar symbol but without any spacing (they fall in class ordinary) and you should not use them as relations but instead only as ordinals, i.e., footnote symbols. For absolute value, see the entry for ‘\vert’ and for norm see the entry for ‘\Vert’. ‘\models’ ⊨ Entails, or satisfies; double turnstile, short double dash (relation). Similar: long double dash ‘\vDash’. ‘\mp’ ∓ Minus or plus (relation). ‘\mu’ μ Lowercase Greek letter (ordinary). ‘\nabla’ ∇ Hamilton’s del, or differential, operator (ordinary). ‘\natural’ ♮ Musical natural notation (ordinary). ‘\ne’ ≠ Not equal (relation). Synonym: ‘\neq’. ‘\nearrow’ ↗ North-east arrow (relation). ‘\neg’ ¬ Logical negation (ordinary). Synonym: ‘\lnot’. Sometimes instead used for negation: ‘\sim’. ‘\neq’ ≠ Not equal (relation). Synonym: ‘\ne’. ‘\ni’ ∋ Reflected membership epsilon; has the member (relation). Synonym: ‘\owns’. Similar: is a member of ‘\in’. ‘\not’ Long solidus, or slash, used to overstrike a following operator (relation). Many negated operators are available that don’t require ‘\not’, particularly with the ‘amssymb’ package. For example, ‘\notin’ is typographically preferable to ‘\not\in’. ‘\notin’ ∉ Not an element of (relation). Similar: not subset of ‘\nsubseteq’. ‘\nu’ ν Lowercase Greek letter (ordinary). ‘\nwarrow’ ↖ North-west arrow (relation). ‘\odot’ ⊙ Dot inside a circle (binary). Similar: variable-sized operator ‘\bigodot’. ‘\oint’ ∮ Contour integral, integral with circle in the middle (operator). ‘\Omega’ Ω uppercase Greek letter (ordinary). ‘\omega’ ω Lowercase Greek letter (ordinary). ‘\ominus’ ⊖ Minus sign, or dash, inside a circle (binary). ‘\oplus’ ⊕ Plus sign inside a circle (binary). Similar: variable-sized operator ‘\bigoplus’. ‘\oslash’ ⊘ Solidus, or slash, inside a circle (binary). ‘\otimes’ ⊗ Times sign, or cross, inside a circle (binary). Similar: variable-sized operator ‘\bigotimes’. ‘\owns’ ∋ Reflected membership epsilon; has the member (relation). Synonym: ‘\ni’. Similar: is a member of ‘\in’. ‘\parallel’ ∥ Parallel (relation). Synonym: ‘\|’. ‘\partial’ ∂ Partial differential (ordinary). ‘\perp’ ⟂ Perpendicular (relation). Similar: ‘\bot’ uses the same glyph but the spacing is different because it is in the class ordinary. ‘\Phi’ Φ Uppercase Greek letter (ordinary). ‘\phi’ ϕ Lowercase Greek letter (ordinary). The variant form is ‘\varphi’ φ. ‘\Pi’ Π uppercase Greek letter (ordinary). ‘\pi’ π Lowercase Greek letter (ordinary). The variant form is ‘\varpi’ ϖ. ‘\pm’ ± Plus or minus (binary). ‘\prec’ ≺ Precedes (relation). Similar: less than ‘<’. ‘\preceq’ ⪯ Precedes or equals (relation). Similar: less than or equals ‘\leq’. ‘\prime’ ′ Prime, or minute in a time expression (ordinary). Typically used as a superscript: ‘$f^\prime$’; ‘$f^\prime$’ and ‘$f'$’ produce the same result. An advantage of the second is that ‘$f'''$’ produces the desired symbol, that is, the same result as ‘$f^{\prime\prime\prime}$’, but uses rather less typing. You can only use ‘\prime’ in math mode. Using the right single quote ‘'’ in text mode produces a different character (apostrophe). ‘\prod’ ∏ Product (operator). ‘\propto’ ∝ Is proportional to (relation) ‘\Psi’ Ψ uppercase Greek letter (ordinary). ‘\psi’ ψ Lowercase Greek letter (ordinary). ‘\rangle’ ⟩ Right angle, or sequence, bracket (closing). Similar: greater than ‘>’. Matches:‘\langle’. ‘\rbrace’ } Right curly brace (closing). Synonym: ‘\}’. Matches ‘\lbrace’. ‘\rbrack’ ] Right square bracket (closing). Synonym: ‘]’. Matches ‘\lbrack’. ‘\rceil’ ⌉ Right ceiling bracket (closing). Matches ‘\lceil’. ‘\Re’ ℜ Real part, real numbers, cursive capital R (ordinary). Related: double-line, or blackboard bold, R ‘\mathbb{R}’; to access this, load the ‘amsfonts’ package. ‘\restriction’ ↾, Restriction of a function (relation). Synonym: ‘\upharpoonright’. Not available in plain TeX. In LaTeX you need to load the ‘amssymb’ package. ‘\revemptyset’ ⦰, Reversed empty set symbol (ordinary). Related: ‘\varnothing’. Not available in plain TeX. In LaTeX you need to load the ‘stix’ package. ‘\rfloor’ ⌋ Right floor bracket, a right square bracket with the top cut off (closing). Matches ‘\lfloor’. ‘\rhd’ ◁ Arrowhead, that is, triangle, pointing right (binary). For the normal subgroup symbol you should instead load ‘amssymb’ and use ‘\vartriangleright’ (which is a relation and so gives better spacing). ‘\rho’ ρ Lowercase Greek letter (ordinary). The variant form is ‘\varrho’ ϱ. ‘\Rightarrow’ ⇒ Implies, right-pointing double line arrow (relation). Similar: right single-line arrow ‘\rightarrow’. ‘\rightarrow’ → Right-pointing single line arrow (relation). Synonym: ‘\to’. Similar: right double line arrow ‘\Rightarrow’. ‘\rightharpoondown’ ⇁ Right-pointing harpoon with barb below the line (relation). ‘\rightharpoonup’ ⇀ Right-pointing harpoon with barb above the line (relation). ‘\rightleftharpoons’ ⇌ Right harpoon up above left harpoon down (relation). ‘\searrow’ ↘ Arrow pointing southeast (relation). ‘\setminus’ ⧵ Set difference, reverse solidus or reverse slash, like \ (binary). Similar: backslash ‘\backslash’ and also ‘\textbackslash’ outside of math mode. ‘\sharp’ ♯ Musical sharp (ordinary). ‘\Sigma’ Σ uppercase Greek letter (ordinary). ‘\sigma’ σ Lowercase Greek letter (ordinary). The variant form is ‘\varsigma’ ς. ‘\sim’ ∼ Similar, in a relation (relation). ‘\simeq’ ≃ Similar or equal to, in a relation (relation). ‘\smallint’ ∫ Integral sign that does not change to a larger size in a display (operator). ‘\smile’ ⌣ Upward curving arc, smile (ordinary). ‘\spadesuit’ ♠ Spade card suit (ordinary). ‘\sqcap’ ⊓ Square intersection symbol (binary). Similar: intersection ‘cap’. ‘\sqcup’ ⊔ Square union symbol (binary). Similar: union ‘cup’. Related: variable-sized operator ‘\bigsqcup’. ‘\sqsubset’ ⊏, Square subset symbol (relation). Similar: subset ‘\subset’. Not available in plain TeX. In LaTeX you need to load the ‘amssymb’ package. ‘\sqsubseteq’ ⊑ Square subset or equal symbol (binary). Similar: subset or equal to ‘\subseteq’. ‘\sqsupset’ ⊐, Square superset symbol (relation). Similar: superset ‘\supset’. Not available in plain TeX. In LaTeX you need to load the ‘amssymb’ package. ‘\sqsupseteq’ ⊒ Square superset or equal symbol (binary). Similar: superset or equal ‘\supseteq’. ‘\star’ ⋆ Five-pointed star, sometimes used as a general binary operation but sometimes reserved for cross-correlation (binary). Similar: the synonyms asterisk ‘*’ and ‘\ast’, which are six-pointed, and more often appear as a superscript or subscript, as with the Kleene star. ‘\subset’ ⊂ Subset (occasionally, is implied by) (relation). ‘\subseteq’ ⊆ Subset or equal to (relation). ‘\succ’ ≻ Comes after, succeeds (relation). Similar: is less than ‘>’. ‘\succeq’ ⪰ Succeeds or is equal to (relation). Similar: less than or equal to ‘\leq’. ‘\sum’ ∑ Summation (operator). Similar: Greek capital sigma ‘\Sigma’. ‘\supset’ ⊃ Superset (relation). ‘\supseteq’ ⊇ Superset or equal to (relation). ‘\surd’ √ Radical symbol (ordinary). The LaTeX command ‘\sqrt{...}’ typesets the square root of the argument, with a bar that extends to cover the argument. ‘\swarrow’ ↙ Southwest-pointing arrow (relation). ‘\tau’ τ Lowercase Greek letter (ordinary). ‘\theta’ θ Lowercase Greek letter (ordinary). The variant form is ‘\vartheta’ ϑ. ‘\times’ × Primary school multiplication sign (binary). See also ‘\cdot’. ‘\to’ → Right-pointing single line arrow (relation). Synonym: ‘\rightarrow’. ‘\top’ ⊤ Top, greatest element of a partially ordered set (ordinary). See also ‘\bot’. ‘\triangle’ △ Triangle (ordinary). ‘\triangleleft’ ◁ Not-filled triangle pointing left (binary). Similar: ‘\lhd’. For the normal subgroup symbol you should load ‘amssymb’ and use ‘\vartriangleleft’ (which is a relation and so gives better spacing). ‘\triangleright’ ▷ Not-filled triangle pointing right (binary). For the normal subgroup symbol you should instead load ‘amssymb’ and use ‘\vartriangleright’ (which is a relation and so gives better spacing). ‘\unlhd’ ⊴ Left-pointing not-filled underlined arrowhead, that is, triangle, with a line under (binary). For the normal subgroup symbol load ‘amssymb’ and use ‘\vartrianglelefteq’ (which is a relation and so gives better spacing). ‘\unrhd’ ⊵ Right-pointing not-filled underlined arrowhead, that is, triangle, with a line under (binary). For the normal subgroup symbol load ‘amssymb’ and use ‘\vartrianglerighteq’ (which is a relation and so gives better spacing). ‘\Uparrow’ ⇑ Double-line upward-pointing arrow (relation). Similar: single-line up-pointing arrow ‘\uparrow’. ‘\uparrow’ ↑ Single-line upward-pointing arrow, diverges (relation). Similar: double-line up-pointing arrow ‘\Uparrow’. ‘\Updownarrow’ ⇕ Double-line upward-and-downward-pointing arrow (relation). Similar: single-line upward-and-downward-pointing arrow ‘\updownarrow’. ‘\updownarrow’ ↕ Single-line upward-and-downward-pointing arrow (relation). Similar: double-line upward-and-downward-pointing arrow ‘\Updownarrow’. ‘\upharpoonright’ ↾, Up harpoon, with barb on right side (relation). Synonym: ‘\restriction’. Not available in plain TeX. In LaTeX you need to load the ‘amssymb’ package. ‘\uplus’ ⊎ Multiset union, a union symbol with a plus symbol in the middle (binary). Similar: union ‘\cup’. Related: variable-sized operator ‘\biguplus’. ‘\Upsilon’ Υ uppercase Greek letter (ordinary). ‘\upsilon’ υ Lowercase Greek letter (ordinary). ‘\varepsilon’ ε Small letter script epsilon (ordinary). This is more widely used in mathematics than the non-variant lunate epsilon form ‘\epsilon’ ϵ. Related: set membership ‘\in’. ‘\vanothing’ ∅, Empty set symbol. Similar: ‘\emptyset’. Related: ‘\revemptyset’. Not available in plain TeX. In LaTeX you need to load the ‘amssymb’ package. ‘\varphi’ φ Variant on the lowercase Greek letter (ordinary). The non-variant form is ‘\phi’ ϕ. ‘\varpi’ ϖ Variant on the lowercase Greek letter (ordinary). The non-variant form is ‘\pi’ π. ‘\varrho’ ϱ Variant on the lowercase Greek letter (ordinary). The non-variant form is ‘\rho’ ρ. ‘\varsigma’ ς Variant on the lowercase Greek letter (ordinary). The non-variant form is ‘\sigma’ σ. ‘\vartheta’ ϑ Variant on the lowercase Greek letter (ordinary). The non-variant form is ‘\theta’ θ. ‘\vdash’ ⊢ Provable; turnstile, vertical and a dash (relation). Similar: turnstile rotated a half-circle ‘\dashv’. ‘\vee’ ∨ Logical or; a downwards v shape (binary). Related: logical and ‘\wedge’. Similar: variable-sized operator ‘\bigvee’. ‘\Vert’ ‖ Vertical double bar (ordinary). *Note Delimiters::, for how to use the ‘mathtools’ package to create flexibly-sized norm symbols. ‘\vert’ | Single line vertical bar (ordinary). For “such that”, as in the definition of a set, use ‘\mid’ because it is a relation. *Note Delimiters::, for how to use the ‘mathtools’ package to create flexibly-sized absolute-value symbols. ‘\wedge’ ∧ Logical and (binary). Synonym: ‘\land’. See also logical or ‘\vee’. Similar: variable-sized operator ‘\bigwedge’. ‘\wp’ ℘ Weierstrass p (ordinary). ‘\wr’ ≀ Wreath product (binary). ‘\Xi’ Ξ uppercase Greek letter (ordinary). ‘\xi’ ξ Lowercase Greek letter (ordinary). ‘\zeta’ ζ Lowercase Greek letter (ordinary). The following symbols are most often used in plain text but LaTeX provides versions to use in mathematical text. ‘\mathdollar’ Dollar sign in math mode: $. ‘\mathparagraph’ Paragraph sign (pilcrow) in math mode, ¶. ‘\mathsection’ Section sign in math mode: §. ‘\mathsterling’ Sterling sign in math mode: £. ‘\mathunderscore’ Underscore in math mode: _. 16.2.1 Arrows ------------- These are the arrows that come with standard LaTeX. The ‘latexsym’ and ‘amsfonts’ packages contain many more. Symbol Command --------------------------------------------------------------------------- ⇓ ‘\Downarrow’ ↓ ‘\downarrow’ ↩ ‘\hookleftarrow’ ↪ ‘\hookrightarrow’ ← ‘\leftarrow’ ⇐ ‘\Leftarrow’ ⇔ ‘\Leftrightarrow’ ↔ ‘\leftrightarrow’ ⟵ ‘\longleftarrow’ ⟸ ‘\Longleftarrow’ ⟷ ‘\longleftrightarrow’ ⟺ ‘\Longleftrightarrow’ ⟼ ‘\longmapsto’ ⟹ ‘\Longrightarrow’ ⟶ ‘\longrightarrow’ ↦ ‘\mapsto’ ↗ ‘\nearrow’ ↖ ‘\nwarrow’ ⇒ ‘\Rightarrow’ → ‘\rightarrow’, or ‘\to’ ↘ ‘\searrow’ ↙ ‘\swarrow’ ↑ ‘\uparrow’ ⇑ ‘\Uparrow’ ↕ ‘\updownarrow’ ⇕ ‘\Updownarrow’ An example of the difference between ‘\to’ and ‘\mapsto’ is: ‘\( f\colon D\to C \) given by \( n\mapsto n^2 \)’. For commutative diagrams there are a number of packages, including ‘tikz-cd’ and ‘amscd’. 16.2.2 ‘\boldmath’ & ‘\unboldmath’ ---------------------------------- Synopsis (used in paragraph mode or LR mode): \boldmath \( MATH \) or \unboldmath \( MATH \) Declarations to change the letters and symbols in MATH to be in a bold font, or to countermand that and bring back the regular (non-bold) default, respectively. They must be used when _not_ in math mode or display math mode (*note Modes::). Both commands are fragile (*note \protect::). In this example each ‘\boldmath’ command takes place inside an ‘\mbox’, we have $\mbox{\boldmath \( v \)} = 5\cdot\mbox{\boldmath \( u \)$}$ which means ‘\boldmath’ is only called in a text mode, here LR mode, and explains why we must switch LaTeX into math mode to set ‘v’ and ‘u’. If you use either command inside math mode, as with ‘Trouble: \( \boldmath x \)’, then you get something like ‘LaTeX Font Warning: Command \boldmath invalid in math mode’ and ‘LaTeX Font Warning: Command \mathversion invalid in math mode’. 16.2.2.1 ‘bm’: Individual bold math symbols ........................................... Specifying ‘\boldmath’ is the best method for typesetting a whole math expression in bold. But to typeset individual symbols within an expression in bold, the ‘bm’ package provided by the LaTeX Project team is better. Its usage is outside the scope of this document (see its documentation at or in your installation) but the spacing in the output of this small example will show that it is an improvement over ‘\boldmath’ within an expression: \usepackage{bm} % in preamble ... we have $\bm{v} = 5\cdot\bm{u}$ 16.2.2.2 OpenType bold math ........................... Unfortunately, when using the Unicode engines (XeLaTeX, LuaLaTeX), neither ‘\boldmath’ nor ‘bm’ usually work well, because the OpenType math fonts normally used with those engines rarely come with a bold companion, and both ‘\boldmath’ and ‘bm’ require this. (The implementation of ‘bm’ relies on ‘\boldmath’, so the requirements are the same.) If you do have a bold math font, though, then ‘\boldmath’ and ‘bm’ work fine. If no such font is available, one alternative is to construct fake bold fonts with the ‘fontspec’ package’s ‘FakeBold=1’ parameter (see its documentation, ). This may be acceptable for drafting or informal distribution, but the results are far from a true bold font. Another alternative to handling bold for OpenType math fonts is to use the ‘\symbf’ (bold), ‘\symbfit’ (bold italic), and related commands from the ‘unicode-math’ package. These do not change the current font, but rather change the (Unicode) “alphabet” used, which in practice is more widely supported than a separate bold font. Many variations are possible, and so there are subtleties to getting the desired output. As usual, see the package documentation (). 16.2.3 Blackboard bold ---------------------- Synopsis: \usepackage{amssymb} % in preamble ... \mathbb{UPPERCASE-LETTER} Provide blackboard bold symbols, sometimes also known as doublestruck letters, used to denote number sets such as the natural numbers, the integers, etc. Here \( \forall n \in \mathbb{N}, n^2 \geq 0 \) the ‘\mathbb{N}’ gives blackboard bold symbol ℕ, representing the natural numbers. If the argument contains something other than an uppercase letter, you do not get an error but you do get strange results, including unexpected characters. There are packages that give access to symbols other than just the capital letters; look on CTAN. 16.2.4 Calligraphic ------------------- Synopsis: \mathcal{UPPERCASE-LETTERS} Use a script-like font. In this example the graph identifier is output in a cursive font. Let the graph be \( \mathcal{G} \). If you use something other than an uppercase letter then you do not get an error but you also do not get math calligraphic output. For instance, ‘\mathcal{g}’ outputs a close curly brace symbol. 16.2.5 Delimiters ----------------- Delimiters are parentheses, braces, or other characters used to mark the start and end of subformulas. This formula has three sets of parentheses delimiting the three subformulas. (z-z_0)^2 = (x-x_0)^2 + (y-y_0)^2 The delimiters do not need to match, so you can enter ‘\( [0,1) \)’. Here are the common delimiters: DelimiterCommand Name ------------------------------------------------------ ( ‘(’ Left parenthesis ) ‘)’ Right parenthesis \} ‘{’ or Left brace ‘\lbrace’ \{ ‘}’ or Right brace ‘\rbrace’ [ ‘[’ or Left bracket ‘\lbrack’ ] ‘]’ or Right bracket ‘\rbrack’ ⌊ ‘\lfloor’ Left floor bracket ⌋ ‘\rfloor’ Right floor bracket ⌈ ‘\lceil’ Left ceiling bracket ⌉ ‘\rceil’ Right ceiling bracket ⟨ ‘\langle’ Left angle bracket ⟩ ‘\rangle’ Right angle bracket / ‘/’ Slash, or forward slash \ ‘\backslash’ Reverse slash, or backslash | ‘|’ or Vertical bar ‘\vert’ ‖ ‘\|’ or Double vertical bar ‘\Vert’ The ‘mathtools’ package allows you to create commands for paired delimiters. For instance, if you put ‘\DeclarePairedDelimiter\abs{\lvert}{\rvert}’ in your preamble then you get two commands for single-line vertical bars (they only work in math mode). The starred form, such as ‘\abs*{\frac{22}{7}}’, has the height of the vertical bars match the height of the argument. The unstarred form, such as ‘\abs{\frac{22}{7}}’, has the bars fixed at a default height. This form accepts an optional argument, as in ‘\abs[SIZE COMMAND]{\frac{22}{7}}’, where the height of the bars is given in SIZE COMMAND, such as ‘\Bigg’. Using instead ‘\lVert’ and ‘\rVert’ as the symbols will give you a norm symbol with the same behavior. 16.2.5.1 ‘\left’ & ‘\right’ ........................... Synopsis: \left DELIMITER1 ... \right DELIMITER2 Make matching parentheses, braces, or other delimiters. LaTeX makes the delimiters tall enough to just cover the size of the formula that they enclose. This makes a unit vector surrounded by parentheses tall enough to cover the entries. \begin{equation} \left(\begin{array}{c} 1 \\ 0 \\ \end{array}\right) \end{equation} *Note Delimiters::, for a list of the common delimiters. Every ‘\left’ must have a matching ‘\right’. In the above example, leaving out the ‘\left(’ gets the error message ‘Extra \right’. Leaving out the ‘\right)’ gets ‘You can't use `\eqno' in math mode’. However, DELIMITER1 and DELIMITER2 need not match. A common case is that you want an unmatched brace, as below. Use a period, ‘.’, as a “null delimiter”. \begin{equation} f(n)=\left\{\begin{array}{ll} 1 &\mbox{--if \(n=0\)} \\ f(n-1)+3n^2 &\mbox{--else} \end{array}\right. \end{equation} Note that to get a curly brace as a delimiter you must prefix it with a backslash, ‘\{’ (*note Reserved characters::). (The packages ‘amsmath’ and ‘mathtools’ allow you to get the above construct through in a ‘cases’ environment.) The ‘\left ... \right’ pair make a group. One consequence is that the formula enclosed in the ‘\left ... \right’ pair cannot have line breaks in the output. This includes both manual line breaks and LaTeX-generated automatic ones. In this example, LaTeX breaks the equation to make the formula fit the margins. Lorem ipsum dolor sit amet \( (a+b+c+d+e+f+g+h+i+j+k+l+m+n+o+p+q+r+s+t+u+v+w+x+y+z) \) But with ‘\left’ and ‘\right’ Lorem ipsum dolor sit amet \( \left(a+b+c+d+e+f+g+h+i+j+k+l+m+n+o+p+q+r+s+t+u+v+w+x+y+z\right) \) LaTeX won’t break the line, causing the formula to extend into the margin. Because ‘\left ... \right’ make a group, all the usual grouping rules hold. Here, the value of ‘\testlength’ set inside the equation will be forgotten, and the output is ‘1.2pt’. \newlength{\testlength} \setlength{\testlength}{1.2pt} \begin{equation} \left( a+b=c \setlength{\testlength}{3.4pt} \right) \the\testlength \end{equation} The ‘\left ... \right’ pair affect the horizontal spacing of the enclosed formula, in two ways. The first is that in ‘\( \sin(x) = \sin\left(x\right) \)’ the one after the equals sign has more space around the ‘x’. That’s because ‘\left( ... \right)’ inserts an inner node while ‘( ... )’ inserts an opening node. The second way that the pair affect the horizontal spacing is that because they form a group, the enclosed subformula will be typeset at its natural width, with no stretching or shrinking to make the line fit better. TeX scales the delimiters according to the height and depth of the enclosed formula. Here LaTeX grows the brackets to extend the full height of the integral. \begin{equation} \left[ \int_{x=r_0}^{\infty} -G\frac{Mm}{r^2}\, dr \right] \end{equation} Manual sizing is often better. For instance, although below the rule has no depth, TeX will create delimiters that extend far below the rule. \begin{equation} \left( \rule{1pt}{1cm} \right) \end{equation} TeX can choose delimiters that are too small, as in ‘\( \left| |x|+|y| \right| \)’. It can also choose delimiters that are too large, as here. \begin{equation} \left( \sum_{0\leq i1/2}+ \underbrace{1/5+1/6+1/7+1/8}_{>1/2}+\cdots \end{displaymath} The superscript appears on top of the expression, and so can look unconnected to the underbrace. ‘\overbrace{MATH}’ Put a brace over MATH, as with ‘\overbrace{x+x+\cdots+x}^{\mbox{\(k\) times}}’. See also ‘\underbrace’. The package ‘mathtools’ adds an over- and underbrace, as well as some improvements on the braces. See the documentation on CTAN. 16.6 Spacing in math mode ========================= When typesetting mathematics, LaTeX puts in spacing according to the normal rules for mathematics texts. If you enter ‘y=m x’ then LaTeX ignores the space and in the output the m is next to the x, as y=mx. But LaTeX’s rules occasionally need tweaking. For example, in an integral the tradition is to put a small extra space between the ‘f(x)’ and the ‘dx’, here done with the ‘\,’ command: \int_0^1 f(x)\,dx LaTeX provides the commands that follow for use in math mode. Many of these spacing definitions are expressed in terms of the math unit “mu”. It is defined as 1/18em, where the em is taken from the current math symbols family (*note Units of length::). Thus, a ‘\thickspace’ is something like 5/18 times the width of a ‘M’. ‘\;’ Synonym: ‘\thickspace’. Normally ‘5.0mu plus 5.0mu’. With the ‘amsmath’ package, or as of the 2020-10-01 LaTeX release, can be used in text mode as well as math mode; otherwise, in math mode only. ‘\negthickspace’ Normally ‘-5.0mu plus 2.0mu minus 4.0mu’. With the ‘amsmath’ package, or as of the 2020-10-01 LaTeX release, can be used in text mode as well as math mode; otherwise, in math mode only. ‘\:’ ‘\>’ Synonym: ‘\medspace’. Normally ‘4.0mu plus 2.0mu minus 4.0mu’. With the ‘amsmath’ package, or as of the 2020-10-01 LaTeX release, can be used in text mode as well as math mode; before that, in math mode only. ‘\negmedspace’ Normally ‘-4.0mu plus 2.0mu minus 4.0mu’. With the ‘amsmath’ package, or as of the 2020-10-01 LaTeX release, can be used in text mode as well as math mode; before that, in math mode only. ‘\,’ Synonym: ‘\thinspace’. Normally ‘3mu’, which is 1/6em. Can be used in both math mode and text mode (*note \thinspace & \negthinspace::). This space is widely used, for instance between the function and the infinitesimal in an integral ‘\int f(x)\,dx’ and, if an author does this, before punctuation in a displayed equation. The antiderivative is \begin{equation} 3x^{-1/2}+3^{1/2}\,. \end{equation} ‘\!’ Synonym: ‘\negthinspace’. A negative thin space. Normally ‘-3mu’. With the ‘amsmath’ package, or as of the 2020-10-01 LaTeX release, can be used in text mode as well as math mode; otherwise, the ‘\!’ command is math mode only but the ‘\negthinspace’ command has always also worked in text mode (*note \thinspace & \negthinspace::). ‘\quad’ This is 18mu, that is, 1em. This is often used for space surrounding equations or expressions, for instance for the space between two equations inside a ‘displaymath’ environment. It is available in both text and math mode. ‘\qquad’ A length of 2 quads, that is, 36mu = 2em. It is available in both text and math mode. 16.6.1 ‘\smash’ --------------- Synopsis: \smash{SUBFORMULA} Typeset SUBFORMULA as if its height and depth were zero. In this example the exponential is so tall that without the ‘\smash’ command LaTeX would separate its line from the line above it, and the uneven line spacing might be unsightly. To compute the tetration $\smash{2^{2^{2^2}}}$, evaluate from the top down, as $2^{2^4}=2^{16}=65536$. (Because of the ‘\smash’ the printed expression could run into the line above so you may want to wait until the final version of the document to make such adjustments.) This pictures the effect of ‘\smash’ by using ‘\fbox’ to surround the box that LaTeX will put on the line. The ‘\blackbar’ command makes a bar extending from 10 points below the baseline to 20 points above. \newcommand{\blackbar}{\rule[-10pt]{5pt}{30pt}} \fbox{\blackbar} \fbox{\smash{\blackbar}} The first box that LaTeX places is 20 points high and 10 points deep. But the second box is treated by LaTeX as having zero height and zero depth, despite that the ink printed on the page still extends well above and below the line. The ‘\smash’ command appears often in mathematics to adjust the size of an element that surrounds a subformula. Here the first radical extends below the baseline while the second lies just on the baseline. \begin{equation} \sqrt{\sum_{0\leq k< n} f(k)} \sqrt{\vphantom{\sum}\smash{\sum_{0\leq k< n}} f(k)} \end{equation} Note the use of ‘\vphantom’ to give the ‘\sqrt’ command an argument with the height of the ‘\sum’ (*note \phantom & \vphantom & \hphantom::). While most often used in mathematics, the ‘\smash’ command can appear in other contexts. However, it doesn’t change into horizontal mode. So if it starts a paragraph then you should first put a ‘\leavevmode’, as in the bottom line below. xxx xxx xxx \smash{yyy} % no paragraph indent \leavevmode\smash{zzz} % usual paragraph indent The package ‘mathtools’ has operators that provide even finer control over smashing a subformula box. 16.6.2 ‘\phantom’ & ‘\vphantom’ & ‘\hphantom’ --------------------------------------------- Synopsis: \phantom{SUBFORMULA} or \vphantom{SUBFORMULA} or \hphantom{SUBFORMULA} The ‘\phantom’ command creates a box with the same height, depth, and width as SUBFORMULA, but empty. That is, this command causes LaTeX to typeset the space but not fill it with the material. Here LaTeX will put a blank line that is the correct width for the answer, but will not show that answer. \begin{displaymath} \int x^2\,dx=\mbox{\underline{$\phantom{(1/3)x^3+C}$}} \end{displaymath} The ‘\vphantom’ variant produces an invisible box with the same vertical size as SUBFORMULA, the same height and depth, but having zero width. And ‘\hphantom’ makes a box with the same width as SUBFORMULA but with zero height and depth. In this example, the tower of exponents in the second summand expression is so tall that TeX places this expression further down than its default. Without adjustment, the two summand expressions would be at different levels. The ‘\vphantom’ in the first expression tells TeX to leave as much vertical room as it does for the tower, so the two expressions come out at the same level. \begin{displaymath} \sum_{j\in\{0,\ldots\, 10\}\vphantom{3^{3^{3^j}}}} \sum_{i\in\{0,\ldots\, 3^{3^{3^j}}\}} i\cdot j \end{displaymath} These commands are often used in conjunction with ‘\smash’. *Note \smash::, which includes another example of ‘\vphantom’. The three phantom commands appear often but note that LaTeX provides a suite of other commands to work with box sizes that may be more convenient, including ‘\makebox’ (*note \mbox & \makebox::) as well as ‘\settodepth’ (*note \settodepth::), ‘\settoheight’ (*note \settoheight::), and ‘\settowidth’ (*note \settowidth::). In addition, the ‘mathtools’ package has many commands that offer fine-grained control over spacing. All three commands produce an ordinary box, without any special mathematics status. So to do something like attaching a superscript you should give it such a status, for example with the ‘\operatorname’ command from the package ‘amsmath’. While most often used in mathematics, these three can appear in other contexts. However, they don’t cause LaTeX to change into horizontal mode. So if one of these starts a paragraph then you should prefix it with ‘\leavevmode’. 16.6.3 ‘\mathstrut’ ------------------- Synopsis: \mathstrut The analogue of ‘\strut’ for mathematics. *Note \strut::. The input ‘$\sqrt{x} + \sqrt{x^i}$’ gives output where the second radical is taller than the first. To add extra vertical space without any horizontal space, so that the two have the same height, use ‘$\sqrt{x\mathstrut} + \sqrt{x^i\mathstrut}$’. The ‘\mathstrut’ command adds the vertical height of an open parenthesis, ‘(’, but no horizontal space. It is defined as ‘\vphantom{(}’, so see *note \phantom & \vphantom & \hphantom:: for more. An advantage over ‘\strut’ is that ‘\mathstrut’ adds no depth, which is often the right thing for formulas. Using the height of an open parenthesis is just a convention; for complete control over the amount of space, use ‘\rule’ with a width of zero. *Note \rule::. 16.7 Math styles ================ TeX’s rules for typesetting a formula depend on the context. For example, inside a displayed equation, the input ‘\sum_{0\leq i and ‘\’ are equivalent to backslash-space, ‘\ ’. Please also note that in order to allow source code indentation, under normal circumstances, TeX ignores leading blanks in a line. So the following prints ‘one word’: one word where the white space between ‘one’ and ‘word’ is produced by the newline after ‘one’, not by the space before ‘word’. 19.7 ‘~’ ======== Synopsis: BEFORE~AFTER The “tie” character, ‘~’, produces a space between BEFORE and AFTER at which the line will not be broken. By default the white space has length 3.33333pt plus 1.66666pt minus 1.11111pt (*note Lengths::). Note that the word ‘tie’ has this meaning in the TeX/Texinfo community; this differs from the typographic term “tie”, which is a diacritic in the shape of an arc, called a “tie-after” accent in ‘The TeXbook’. Here LaTeX will not break the line between the final two words: Thanks to Prof.~Lerman. In addition, despite the period, LaTeX does not use the end-of-sentence spacing (*note \@::). Ties prevent the end of line separation of things where that could cause confusion. They also still allow hyphenation (of either of the tied words), so they are generally preferable to putting consecutive words in an ‘\mbox’ (*note \mbox & \makebox::). They are also matters of taste, sometimes alarmingly dogmatic taste, among readers. Nevertheless, here are some usage models, many of them from ‘The TeXbook’. • Between an enumerator label and number, such as in references: ‘Chapter~12’, or ‘Theorem~\ref{th:Wilsons}’, or ‘Figure~\ref{fig:KGraph}’. • When cases are enumerated inline: ‘(b)~Show that $f(x)$ is (1)~continuous, and (2)~bounded’. • Between a number and its unit: ‘$745.7.8$~watts’ (the ‘siunitx’ package has a special facility for this) or ‘144~eggs’. This includes between a month and day number in a date: ‘October~12’ or ‘12~Oct’. In general, in any expressions where numbers and abbreviations or symbols are separated by a space: ‘AD~565’, or ‘2:50~pm’, or ‘Boeing~747’, or ‘268~Plains Road’, or ‘\$$1.4$~billion’. Other common choices here are a thin space (*note \thinspace & \negthinspace::) and no space at all. • When mathematical phrases are rendered in words: ‘equals~$n$’, or ‘less than~$\epsilon$’, or ‘given~$X$’, or ‘modulo~$p^e$ for all large~$n$’ (but compare ‘is~$15$’ with ‘is $15$~times the height’). Between mathematical symbols in apposition with nouns: ‘dimension~$d$’ or ‘function~$f(x)$’ (but compare ‘with length $l$~or more’). When a symbol is a tightly bound object of a preposition: ‘of~$x$’, or ‘from $0$ to~$1$’, or ‘in common with~$m$’. • Between symbols in series: ‘$1$,~$2$, or~$3$’ or ‘$1$,~$2$, \ldots,~$n$’. • Between a person’s given names and between multiple surnames: ‘Donald~E. Knuth’, or ‘Luis~I. Trabb~Pardo’, or ‘Charles~XII’—but you must give TeX places to break the line so you might do ‘Charles Louis Xavier~Joseph de~la Vall\'ee~Poussin’. 19.8 ‘\thinspace’ & ‘\negthinspace’ =================================== Synopsis, one of: \thinspace \negthinspace These produce unbreakable and unstretchable spaces of 1/6em and -1/6em, respectively. These are the text mode equivalents of ‘\,’ and ‘\!’ (*note Spacing in math mode/\thinspace::). You can use ‘\,’ as a synonym for ‘\thinspace’ in text mode. One common use of ‘\thinspace’ is as the space between nested quotes: Killick replied, ``I heard the Captain say, `Ahoy there.'\thinspace'' Another use is that some style guides call for a ‘\thinspace’ between an ellipsis and a sentence ending period (other style guides, think the three dots and/or four dots are plenty). Another style-specific use is between initials, as in ‘D.\thinspace E.\ Knuth’. LaTeX provides a variety of similar spacing commands for math mode (*note Spacing in math mode::). With the ‘amsmath’ package, or as of the 2020-10-01 LaTeX release, they can be used in text mode as well as math mode, including ‘\!’ for ‘\negthinspace’; but otherwise, they are available only in math mode. 19.9 ‘\/’ ========= Synopsis: BEFORE-CHARACTER\/AFTER-CHARACTER Insert an “italic correction”, a small space defined by the font designer for each character (possibly zero), to avoid the character colliding with whatever follows. When you use ‘\/’, LaTeX takes the correction from the font metric file, scales it by any scaling that has been applied to the font, and then inserts that much horizontal space. Here, were it not for the ‘\/’, the BEFORE-CHARACTER italic f would hit the AFTER-CHARACTER roman H \newcommand{\companylogo}{{\it f}\/H} because the italic letter f leans far to the right. If AFTER-CHARACTER is a period or comma then don’t insert an italic correction since those punctuation symbols are so low to the baseline already. However, with semicolons or colons, as well as with normal letters, the italic correction can help. It is typically used between a switch from italic or slanted fonts to an upright font. When you use commands such as ‘\emph’ and ‘\textit’ and ‘\textsl’ to change fonts, LaTeX automatically inserts the italic correction when needed (*note Font styles::). However, declarations such as ‘\em’ and ‘\itshape’ and ‘\slshape’ do not automatically insert italic corrections. Upright characters can also have an italic correction. An example where this is needed is the name ‘pdf\/\TeX’. However, most upright characters have a zero italic correction. Some font creators do not include italic correction values even for italic fonts. Technically, LaTeX uses another font-specific value, the so-called “slant parameter” (namely ‘\fontdimen1’), to determine whether to possibly insert an italic correction, rather than tying the action to particular font commands. There is no concept of italic correction in math mode; math spacing is done in a different way. 19.10 ‘\hrulefill’ & ‘\dotfill’ =============================== Synopsis, one of: \hrulefill \dotfill Produce an infinite horizontal rubber length (*note Lengths::) that LaTeX fills with a rule (that is, a line) or with dots, instead of white space. This outputs a line 2 inches long. Name:~\makebox[2in]{\hrulefill} This example, when placed between blank lines, creates a paragraph that is left and right justified and where the middle is filled with evenly spaced dots. \noindent John Aubrey, RN \dotfill{} Melbury Lodge To make the rule or dots go to the line’s end use ‘\null’ at the start or end. To change the rule’s thickness, copy the definition and adjust it, as here \renewcommand{\hrulefill}{% \leavevmode\leaders\hrule height 1pt\hfill\kern0pt } which changes the default thickness of 0.4pt to 1pt. Similarly, adjust the dot spacing as with \renewcommand{\dotfill}{% \leavevmode\cleaders\hbox to 1.00em{\hss .\hss }\hfill\kern0pt } which changes the default length of 0.33em to 1.00em. This example produces a line for a signature. \begin{minipage}{4cm} \centering \hrulefill\\ Signed \end{minipage} The line is 4cm long. 19.11 ‘\bigskip’ & ‘\medskip’ & ‘\smallskip’ ============================================ Synopsis, one of: \bigskip \medskip \smallskip Produce an amount of vertical space, large or medium-sized or small. These commands are fragile (*note \protect::). Here the skip suggests the passage of time (from The Golden Ocean by O’Brian). Mr Saumarez would have something rude to say to him, no doubt: he was at home again, and it was delightful. \bigskip ``A hundred and fifty-seven miles and one third, in twenty-four hours,'' said Peter. Each command is associated with a length defined in the document class file. ‘\bigskip’ The same as ‘\vspace{\bigskipamount}’, ordinarily about one line space, with stretch and shrink. The default for the ‘book’ and ‘article’ classes is ‘12pt plus 4pt minus 4pt’. ‘\medskip’ The same as ‘\vspace{\medskipamount}’, ordinarily about half of a line space, with stretch and shrink. The default for the ‘book’ and ‘article’ classes is ‘6pt plus 2pt minus 2pt’. ‘\smallskip’ The same as ‘\vspace{\smallskipamount}’, ordinarily about a quarter of a line space, with stretch and shrink. The default for the ‘book’ and ‘article’ classes is ‘3pt plus 1pt minus 1pt’. Because each command is a ‘\vspace’, if you use it in mid-paragraph then it will insert its vertical space between the line in which you use it and the next line, not necessarily at the place that you use it. So these are best between paragraphs. The commands ‘\bigbreak’, ‘\medbreak’, and ‘\smallbreak’ are similar but also suggest to LaTeX that this is a good place to put a page break (*note \bigbreak & \medbreak & \smallbreak::. 19.12 ‘\bigbreak’ & ‘\medbreak’ & ‘\smallbreak’ =============================================== Synopsis, one of: \bigbreak \medbreak \smallbreak Produce a vertical space that is big or medium-sized or small, and suggest to LaTeX that this is a good place to break the page. (The associated penalties are respectively −200, −100, and −50.) *Note \bigskip & \medskip & \smallskip::, for more. These commands produce the same vertical space but differ in that they also remove a preceding vertical space if it is less than what they would insert (as with ‘\addvspace’). In addition, they terminate a paragraph where they are used: this example abc\bigbreak def ghi jkl mno pqr will output three paragraphs, the first ending in ‘abc’ and the second starting, after an extra vertical space and a paragraph indent, with ‘def’. 19.13 ‘\strut’ ============== Synopsis: \strut Ensure that the current line has height at least ‘0.7\baselineskip’ and depth at least ‘0.3\baselineskip’. Essentially, LaTeX inserts into the line a rectangle having zero width, ‘\rule[-0.3\baselineskip]{0pt}{\baselineskip}’ (*note \rule::). The ‘\baselineskip’ changes with the current font or fontsize. In this example the ‘\strut’ keeps the box inside the frame from having zero height. \setlength{\fboxsep}{0pt}\framebox[2in]{\strut} This example has four lists. In the first there is a much bigger gap between items 2 and 3 than there is between items 1 and 2. The second list fixes that with a ‘\strut’ at the end of its first item’s second line. \setlength{\fboxsep}{0pt} \noindent\begin{minipage}[t]{0.2\linewidth} \begin{enumerate} \item \parbox[t]{15pt}{test \\ test} \item test \item test \end{enumerate} \end{minipage}% \begin{minipage}[t]{0.2\linewidth} \begin{enumerate} \item \parbox[t]{15pt}{test \\ test\strut} \item test \item test \end{enumerate} \end{minipage}% \begin{minipage}[t]{0.2\linewidth} \begin{enumerate} \item \fbox{\parbox[t]{15pt}{test \\ test}} \item \fbox{test} \item \fbox{test} \end{enumerate} \end{minipage}% \begin{minipage}[t]{0.2\linewidth} \begin{enumerate} \item \fbox{\parbox[t]{15pt}{test \\ test\strut}} \item \fbox{test} \item \fbox{test} \end{enumerate} \end{minipage}% The final two lists use ‘\fbox’ to show what’s happening. The first item ‘\parbox’ of the third list goes only to the bottom of its second ‘test’, which happens not have any characters that descend below the baseline. The fourth list adds the strut that gives the needed extra below-baseline space. The ‘\strut’ command is often useful in graphics, such as in ‘TikZ’ or ‘Asymptote’. For instance, you may have a command such as ‘\graphnode{NODE-NAME}’ that fits a circle around NODE-NAME. However, unless you are careful the NODE-NAME’s ‘x’ and ‘y’ will produce different-diameter circles because the characters are different sizes. A careful ‘\graphnode’ might insert a ‘\strut’, then NODE-NAME, and then draw the circle. The general approach of using a zero width ‘\rule’ is useful in many circumstances. In this table, the zero-width rule keeps the top of the first integral from hitting the ‘\hline’. Similarly, the second rule keeps the second integral from hitting the first. \begin{tabular}{rl} \textsc{Integral} &\textsc{Value} \\ \hline $\int_0^x t\, dt$ &$x^2/2$ \rule{0em}{2.5ex} \\ $\int_0^x t^2\, dt$ &$x^3/3$ \rule{0em}{2.5ex} \end{tabular} (Although the line-ending double backslash command has an available optional argument to change the corresponding baseline skip, that won’t solve this issue. Changing the first double backslash to something like ‘\\[2.5ex]’ will put more room between the header line and the ‘\hline’ rule, and the integral would still hit the rule.) 19.14 ‘\vspace’ =============== Synopsis, one of: \vspace{LENGTH} \vspace*{LENGTH} Add the vertical space LENGTH. The LENGTH can be positive, negative, or zero. It is a rubber length—it may contain a ‘plus’ or ‘minus’ component (*note Lengths::). This puts space between the two paragraphs. And I slept. \vspace{1ex plus 0.5ex} The new day dawned cold. (*Note \bigskip & \medskip & \smallskip::, for common inter-paragraph spaces.) The ‘*’-form inserts vertical space that is non-discardable. More precisely, LaTeX discards vertical space at a page break and the ‘*’-form causes the space to stay. This example leaves space between the two questions. Question: Find the integral of \( 5x^4+5 \). \vspace*{2cm plus 0.5cm} Question: Find the derivative of \( x^5+5x+9 \). That space will be present even if the page break happens to fall between the questions. If you use ‘\vspace’ in the middle of a paragraph (i.e., in horizontal mode) then the space is inserted after the line containing the ‘\vspace’ command; it does not start a new paragraph at the ‘\vspace’ command. In this example the two questions will be evenly spaced vertically on the page, with at least one inch of space below each. \begin{document} 1) Who put the bomp in the bomp bah bomp bah bomp? \vspace{1in plus 1fill} 2) Who put the ram in the rama lama ding dong? \vspace{1in plus 1fill} \end{document} 19.15 ‘\vfill’ ============== Synopsis: \vfill End the current paragraph and insert a vertical rubber length that is infinite, so it can stretch or shrink as far as needed (*note Lengths::). It is often used in the same way as ‘\vspace{\fill}’, except that ‘\vfill’ ends the current paragraph whereas ‘\vspace{\fill}’ adds the infinite vertical space below its line, irrespective of the paragraph structure. In both cases that space will disappear at a page boundary; to circumvent this see the starred option in *note \vspace::. In this example the page is filled, so the top and bottom lines contain the text ‘Lost Dog!’ and the second ‘Lost Dog!’ is exactly halfway between them. \begin{document} Lost Dog! \vfill Lost Dog! % perfectly in the middle \vfill Lost Dog! \end{document} 19.16 ‘\addvspace’ ================== Synopsis: \addvspace{VERT-LENGTH} Add a vertical space of VERT-LENGTH. However, if there are two or more ‘\addvspace’’s in a sequence then together they only add the space needed to make the natural length equal to the maximum of the VERT-LENGTH’s in that sequence. This command is fragile (*note \protect::). The VERT-LENGTH is a rubber length (*note Lengths::). This example illustrates. The ‘picture’ draws a scale over which to rules are placed. In a standard LaTeX article the length ‘\baselineskip’ is 12pt. As shown by the scale, the two rules are 22pt apart: the sum of the ‘\baselineskip’ and the 10pt from the first ‘\addvspace’. \documentclass{article} \usepackage{color} \begin{document} \setlength{\unitlength}{2pt}% \noindent\begin{picture}(0,0)% \multiput(0,0)(0,-1){25}{{\color{blue}\line(1,0){1}}} \multiput(0,0)(0,-5){6}{{\color{red}\line(1,0){2}}} \end{picture}% \rule{0.25\linewidth}{0.1pt}% \par\addvspace{10pt}% \addvspace{20pt}% \par\noindent\rule{0.25\linewidth}{0.1pt}% \end{document} Now uncomment the second ‘\addvspace’. It does not make the gap 20pt longer; instead the gap is the sum of ‘\baselineskip’ and 20pt. So ‘\addvspace’ in a sense does the opposite of its name—it makes sure that multiple vertical spaces do not accumulate, but instead that only the largest one is used. LaTeX uses this command to adjust the vertical space above or below an environment that starts a new paragraph. For instance, a ‘theorem’ environment begins and ends with ‘\addvspace’ so that two consecutive ‘theorem’’s are separated by one vertical space, not two. A error ‘Something's wrong--perhaps a missing \item’ pointing to an ‘\addvspace’ means that you were not in vertical mode when you hit this command. One way to change that is to precede ‘\addvspace’ with a ‘\par’ command (*note \par::), as in the above example. 20 Boxes ******** At its core, LaTeX puts things in boxes and then puts the boxes on a page. So these commands are central. There are many packages on CTAN that are useful for manipulating boxes. One useful adjunct to the commands here is ‘adjustbox’. 20.1 ‘\mbox’ & ‘\makebox’ ========================= Synopsis, one of: \mbox{TEXT} \makebox{TEXT} \makebox[WIDTH]{TEXT} \makebox[WIDTH][POSITION]{TEXT} Create a box, a container for material. The TEXT is typeset in LR mode (*note Modes::) so it is not broken into lines. The ‘\mbox’ command is robust, while ‘\makebox’ is fragile (*note \protect::). Because ‘text’ is not broken into lines, you can use ‘\mbox’ to prevent hyphenation. In this example, LaTeX will not hyphenate the tank name, ‘T-34’. The soviet tank \mbox{T-34} is a symbol of victory against nazism. The first two command invocations shown, ‘\mbox’ and ‘\makebox’, are roughly the same. They create a box just wide enough to contain the TEXT. (They are like plain TeX’s ‘\hbox’.) In the third version the optional argument WIDTH specifies the width of the box. Note that the space occupied by the text need not equal the width of the box. For one thing, TEXT can be too small; this creates a full-line box \makebox[\linewidth]{Chapter Exam} with ‘Chapter Exam’ centered. But TEXT can also be too wide for WIDTH. See the example below of zero-width boxes. In the WIDTH argument you can use the following lengths that refer to the dimension of the box that LaTeX gets on typesetting TEXT: ‘\depth’, ‘\height’, ‘\width’, ‘\totalheight’ (this is the box’s height plus its depth). For example, to make a box with the text stretched to double the natural size you can say this. \makebox[2\width]{Get a stretcher} For the fourth command synopsis version the optional argument POSITION gives position of the text within the box. It may take the following values: ‘c’ The TEXT is centered (default). ‘l’ The TEXT is flush left. ‘r’ Flush right. ‘s’ Stretch the interword space in TEXT across the entire WIDTH. The TEXT must contain stretchable space for this to work. For instance, this could head a press release: ‘\noindent\makebox[\textwidth][s]{\large\hfil IMMEDIATE\hfil RELEASE\hfil}’ A common use of ‘\makebox’ is to make zero-width text boxes. This puts the value of the quiz questions to the left of those questions. \newcommand{\pts}[1]{\makebox[0em][r]{#1 points\hspace*{1em}}} \pts{10}What is the air-speed velocity of an unladen swallow? \pts{90}An African or European swallow? The right edge of the output ‘10 points ’ (note the ending space after ‘points’) will be just before the ‘What’. You can use ‘\makebox’ similarly when making graphics, such as in ‘TikZ’ or ‘Asymptote’, where you put the edge of the text at a known location, regardless of the length of that text. For boxes with frames see *note \fbox & \framebox::. For colors see *note Colored boxes::. There is a related version of ‘\makebox’ that is used within the ‘picture’ environment, where the length is given in terms of ‘\unitlength’ (*note \makebox (picture)::). As TEXT is typeset in LR mode, neither a double backslash ‘\\’ nor ‘\par’ will give you a new line; for instance ‘\makebox{abc def \\ ghi}’ outputs ‘abc defghi’ while ‘\makebox{abc def \par ghi}’ outputs ‘abc def ghi’, both on a single line. To get multiple lines see *note \parbox:: and *note minipage::. 20.2 ‘\fbox’ & ‘\framebox’ ========================== Synopses, one of: \fbox{TEXT} \framebox{TEXT} \framebox[WIDTH]{TEXT} \framebox[WIDTH][POSITION]{TEXT} Create a box with an enclosing frame, four rules surrounding the TEXT. These commands are the same as ‘\mbox’ and ‘\makebox’ except for the frame (*note \mbox & \makebox::). The ‘\fbox’ command is robust, the ‘\framebox’ command is fragile (*note \protect::). \fbox{Warning! No work shown, no credit given.} LaTeX puts the text into a box, the text cannot be hyphenated. Around that box, separated from it by a small gap, are four rules making a frame. The first two command invocations, ‘\fbox{...}’ and ‘\framebox{...}’, are roughly the same. As to the third and fourth invocations, the optional arguments allow you to specify the box width as WIDTH and the position of the text inside that box as POSITION. *Note \mbox & \makebox::, for the full description but here is an example creating an empty box that is 1/4in wide. \setlength{\fboxsep}{0pt}\framebox[0.25in]{\strut}} The ‘\strut’ ensures a total height of ‘\baselineskip’ (*note \strut::). These parameters determine the frame layout. ‘\fboxrule’ The thickness of the rules around the enclosed box. The default is 0.2pt. Change it with a command such as ‘\setlength{\fboxrule}{0.8pt}’ (*note \setlength::). ‘\fboxsep’ The distance from the frame to the enclosed box. The default is 3pt. Change it with a command such as ‘\setlength{\fboxsep}{0pt}’ (*note \setlength::). Setting it to 0pt is useful sometimes: this will put a frame around the picture with no white border. {\setlength{\fboxsep}{0pt}% \framebox{% \includegraphics[width=0.5\textwidth]{prudence.jpg}}} The extra curly braces keep the effect of the ‘\setlength’ local. As with ‘\mbox’ and ‘\makebox’, LaTeX will not break lines in TEXT. But this example has LaTeX break lines to make a paragraph, and then frame the result. \framebox{% \begin{minipage}{0.6\linewidth} My dear, here we must run as fast as we can, just to stay in place. And if you wish to go anywhere you must run twice as fast as that. \end{minipage}} *Note Colored boxes::, for colors other than black and white. The ‘picture’ environment has a version of the ‘\framebox’ command where the units depend on ‘picture’’s ‘\unitlength’ (*note \framebox (picture)::). 20.3 ‘\parbox’ ============== Synopses, one of: \parbox{WIDTH}{CONTENTS} \parbox[POSITION]{WIDTH}{CONTENTS} \parbox[POSITION][HEIGHT]{WIDTH}{CONTENTS} \parbox[POSITION][HEIGHT][INNER-POS]{WIDTH}{CONTENTS} Produce a box of text that is WIDTH wide. Use this command to make a box of small pieces of text, of a single paragraph. This command is fragile (*note \protect::). \begin{picture}(0,0) ... \put(1,2){\parbox{1.75in}{\raggedright Because the graph is a line on this semilog paper, the relationship is exponential.}} \end{picture} The CONTENTS are processed in a text mode (*note Modes::) so LaTeX will break lines to make a paragraph. But it won’t make multiple paragraphs; for that, use a ‘minipage’ environment (*note minipage::). The options for ‘\parbox’ (except for CONTENTS) are the same as those for ‘minipage’. For convenience a summary of the options is here but see *note minipage:: for a complete description. There are two required arguments. The WIDTH is a rigid length (*note Lengths::). It sets the width of the box into which LaTeX typesets CONTENTS. The CONTENTS is the text that is placed in that box. It should not have any paragraph-making components. There are three optional arguments, POSITION, HEIGHT, and INNER-POS. The POSITION gives the vertical alignment of the “parbox” with respect to the surrounding material. The supported values are ‘c’ or ‘m’ to make the vertical center of the parbox lines up with the center of the adjacent text line (this is the default), or ‘t’ to match the top line of the parbox with the baseline of the surrounding material, or ‘b’ to match the bottom line. The optional argument HEIGHT overrides the natural height of the box. The optional argument INNER-POS controls the placement of CONTENT inside the ‘parbox’. Its default is the value of POSITION. Its possible values are: ‘t’ to put the CONTENT at the top of the box, ‘c’ to put it in the vertical center, ‘b’ to put it at the bottom of the box, and ‘s’ to stretch it out vertically (for this, the text must contain vertically stretchable space). 20.4 ‘\raisebox’ ================ Synopsis, one of: \raisebox{DISTANCE}{TEXT} \raisebox{DISTANCE}[HEIGHT]{TEXT} \raisebox{DISTANCE}[HEIGHT][DEPTH]{TEXT} Raise or lower TEXT. This command is fragile (*note \protect::). This example makes a command for denoting the restriction of a function by lowering the vertical bar symbol. \newcommand*\restricted[1]{\raisebox{-.5ex}{$|$}_{#1}} $f\restricted{A}$ The first mandatory argument DISTANCE specifies how far to raise the second mandatory argument TEXT. This is a rigid length (*note Lengths::). If it is negative then it lowers TEXT. The TEXT is processed in LR mode so it cannot contain line breaks (*note Modes::). The optional arguments HEIGHT and DEPTH are dimensions. If they are specified, they override the natural height and depth of the box LaTeX gets by typesetting TEXT. In the arguments DISTANCE, HEIGHT, and DEPTH you can use the following lengths that refer to the dimension of the box that LaTeX gets on typesetting TEXT: ‘\depth’, ‘\height’, ‘\width’, ‘\totalheight’ (this is the box’s height plus its depth). This will align two graphics on their top (*note Graphics::). \usepackage{graphicx,calc} % in preamble ... \begin{center} \raisebox{1ex-\height}{% \includegraphics[width=0.4\linewidth]{lion.png}} \qquad \raisebox{1ex-\height}{% \includegraphics[width=0.4\linewidth]{meta.png}} \end{center} The first ‘\height’ is the height of ‘lion.png’ while the second is the height of ‘meta.png’. 20.5 ‘\sbox’ & ‘\savebox’ ========================= Synopsis, one of: \sbox{BOX-CMD}{TEXT} \savebox{BOX-CMD}{TEXT} \savebox{BOX-CMD}[WIDTH]{TEXT} \savebox{BOX-CMD}[WIDTH][POS]{TEXT} Typeset TEXT just as with ‘\makebox’ (*note \mbox & \makebox::) except that LaTeX does not output it but instead saves it in a box register referred to by a variable named BOX-CMD. The variable name BOX-CMD begins with a backslash, ‘\’. You must have previously allocated the box register BOX-CMD with ‘\newsavebox’ (*note \newsavebox::). The ‘\sbox’ command is robust while ‘\savebox’ is fragile (*note \protect::). This creates and uses a box register. \newsavebox{\fullname} \sbox{\fullname}{John Jacob Jingleheimer Schmidt} ... \usebox{\fullname}! His name is my name, too! Whenever we go out, the people always shout! There goes \usebox{\fullname}! Ya da da da da da da. One advantage of using and reusing a box register over a ‘\newcommand’ macro variable is efficiency, that LaTeX need not repeatedly retypeset the contents. See the example below. The first two command invocations shown above, ‘\sbox{BOX-CMD}{TEXT}’ and ‘\savebox{BOX-CMD}{TEXT}’, are roughly the same. As to the third and fourth, the optional arguments allow you to specify the box width as WIDTH, and the position of the text inside that box as POSITION. *Note \mbox & \makebox::, for the full description. In the ‘\sbox’ and ‘\savebox’ commands the TEXT is typeset in LR mode so it does not have line breaks (*note Modes::). If you use these then LaTeX doesn’t give you an error but it ignores what you want: if you enter ‘\sbox{\newreg}{test \\ test}’ and ‘\usebox{\newreg}’ then you get ‘testtest’, while if you enter ‘\sbox{\newreg}{test \par test}’ and ‘\usebox{\newreg}’ then you get ‘test test’, but no error or warning. To fix this use a ‘\parbox’ or ‘minipage’ as here. \newsavebox{\areg} \savebox{\areg}{% \begin{minipage}{\linewidth} \begin{enumerate} \item First item \item Second item \end{enumerate} \end{minipage}} ... \usebox{\areg} As an example of the efficiency of reusing a register’s contents, this puts the same picture on each page of the document by putting it in the header. LaTeX only typesets it once. \usepackage{graphicx} % all this in the preamble \newsavebox{\sealreg} \savebox{\sealreg}{% \setlength{\unitlength}{1in}% \begin{picture}(0,0)% \put(1.5,-2.5){% \begin{tabular}{c} \includegraphics[height=2in]{companylogo.png} \\ Office of the President \end{tabular}} \end{picture}% } \markright{\usebox{\sealreg}} \pagestyle{headings} The ‘picture’ environment is good for fine-tuning the placement. If the register ‘\noreg’ has not already been defined then you get something like ‘Undefined control sequence. \noreg’. 20.6 ‘lrbox’ ============ Synopsis: \begin{lrbox}{BOX-CMD} TEXT \end{lrbox} This is the environment form of the ‘\sbox’ and ‘\savebox’ commands, and is equivalent to them. *Note \sbox & \savebox::, for the full description. The TEXT inside the environment is saved in the box register referred to by variable ‘BOX-CMD’. The variable name BOX-CMD must begin with a backslash, ‘\’. You must allocate this box register in advance with ‘\newsavebox’ (*note \newsavebox::). In this example the environment is convenient for entering the ‘tabular’. \newsavebox{\jhreg} \begin{lrbox}{\jhreg} \begin{tabular}{c} \includegraphics[height=1in]{jh.png} \\ Jim Hef{}feron \end{tabular} \end{lrbox} ... \usebox{\jhreg} 20.7 ‘\usebox’ ============== Synopsis: \usebox{BOX-CMD} Produce the box most recently saved in the box register BOX-CMD by the commands ‘\sbox’ or ‘\savebox’, or the ‘lrbox’ environment. For more information and examples, *note \sbox & \savebox::. (Note that the variable name BOX-CMD starts with a backslash, ‘\’.) This command is robust (*note \protect::). 21 Color ******** You can add color to text, rules, etc. You can also have color in a box or on an entire page and write text on top of it. Color support comes as an additional package. So put ‘\usepackage{color}’ in your document preamble to use the commands described here. Many other packages also supplement LaTeX’s color abilities. Particularly worth mentioning is ‘xcolor’, which is widely used and significantly extends the capabilities described here, including adding ‘HTML’ and ‘Hsb’ color models. 21.1 ‘color’ package options ============================ Synopsis (must be in the document preamble): \usepackage[COMMA-SEPARATED OPTION LIST]{color} When you load the ‘color’ package there are two kinds of available options. The first specifies the “printer driver”. LaTeX doesn’t contain information about different output systems but instead depends on information stored in a file. Normally you should not specify the driver option in the document, and instead rely on your system’s default. One advantage of this is that it makes the document portable across systems. For completeness we include a list of the drivers. The currently relevant ones are: ‘dvipdfmx’, ‘dvips’, ‘dvisvgm’, ‘luatex’, ‘pdftex’, ‘xetex’. The two ‘xdvi’ and ‘oztex’ are essentially aliases for ‘dvips’ (and ‘xdvi’ is monochrome). Ones that should not be used for new systems are: ‘dvipdf’, ‘dvipdfm’, ‘dviwin’, ‘dvipsone’, ‘emtex’, ‘pctexps’, ‘pctexwin’, ‘pctexhp’, ‘pctex32’, ‘truetex’, ‘tcidvi’, ‘vtex’ (and ‘dviwindo’ is an alias for ‘dvipsone’). The second kind of options, beyond the drivers, are below. ‘monochrome’ Disable the color commands, so that they do not generate errors but do not generate color either. ‘dvipsnames’ Make available a list of 68 color names that are often used, particularly in legacy documents. These color names were originally provided by the ‘dvips’ driver, giving the option name. ‘nodvipsnames’ Do not load that list of color names, saving LaTeX a tiny amount of memory space. 21.2 Color models ================= A “color model” is a way of representing colors. LaTeX’s capabilities depend on the printer driver. However, the ‘pdftex’, ‘xetex’, and ‘luatex’ printer drivers are today by far the most commonly used. The models below work for those drivers. All but one of these is also supported by essentially all other printer drivers used today. Note that color combination can be additive or subtractive. Additive mixes colors of light, so that for instance combining full intensities of red, green, and blue produces white. Subtractive mixes pigments, such as with inks, so that combining full intensity of cyan, magenta, and yellow makes black. ‘cmyk’ A comma-separated list with four real numbers between 0 and 1, inclusive. The first number is the intensity of cyan, the second is magenta, and the others are yellow and black. A number value of 0 means minimal intensity, while a 1 is for full intensity. This model is often used in color printing. It is a subtractive model. ‘gray’ A single real number between 0 and 1, inclusive. The colors are shades of grey. The number 0 produces black while 1 gives white. ‘rgb’ A comma-separated list with three real numbers between 0 and 1, inclusive. The first number is the intensity of the red component, the second is green, and the third the blue. A number value of 0 means that none of that component is added in, while a 1 means full intensity. This is an additive model. ‘RGB’ (‘pdftex’, ‘xetex’, ‘luatex’ drivers) A comma-separated list with three integers between 0 and 255, inclusive. This model is a convenience for using ‘rgb’ since outside of LaTeX colors are often described in a red-green-blue model using numbers in this range. The values entered here are converted to the ‘rgb’ model by dividing by 255. ‘named’ Colors are accessed by name, such as ‘PrussianBlue’. The list of names depends on the driver, but all support the names ‘black’, ‘blue’, ‘cyan’, ‘green’, ‘magenta’, ‘red’, ‘white’, and ‘yellow’ (See the ‘dvipsnames’ option in *note Color package options::). 21.3 Commands for color ======================= These are the commands available with the ‘color’ package. 21.3.1 Define colors -------------------- Synopsis: \definecolor{NAME}{MODEL}{SPECIFICATION} Give the name NAME to the color. For example, after this \definecolor{silver}{rgb}{0.75,0.75,0.74} you can use that color name with ‘Hi ho, \textcolor{silver}{Silver}!’. This example gives the color a more abstract name, so it could change and not be misleading. \definecolor{logocolor}{RGB}{145,92,131} % RGB needs pdflatex \newcommand{\logo}{\textcolor{logocolor}{Bob's Big Bagels}} Often a document’s colors are defined in the preamble, or in the class or style, rather than in the document body. 21.3.2 Colored text ------------------- Synopses: \textcolor{NAME}{...} \textcolor[COLOR MODEL]{COLOR SPECIFICATION}{...} or \color{NAME} \color[COLOR MODEL]{COLOR SPECIFICATION} The affected text gets the color. This line \textcolor{magenta}{My name is Ozymandias, King of Kings;} Look on my works, ye Mighty, and despair! causes the first half to be in magenta while the rest is in black. You can use a color declared with ‘\definecolor’ in exactly the same way that we just used the builtin color ‘magenta’. \definecolor{MidlifeCrisisRed}{rgb}{1.0,0.11,0.0} I'm thinking about getting a \textcolor{MidlifeCrisisRed}{sports car}. The two ‘\textcolor’ and ‘\color’ differ in that the first is a command form, enclosing the text to be colored as an argument. Often this form is more convenient, or at least more explicit. The second form is a declaration, as in ‘The moon is made of {\color{green} green} cheese’, so it is in effect until the end of the current group or environment. This is sometimes useful when writing macros or as below where it colors everything inside the ‘center’ environment, including the vertical and horizontal lines. \begin{center} \color{blue} \begin{tabular}{l|r} UL &UR \\ \hline LL &LR \end{tabular} \end{center} You can use color in equations. A document might have this definition in the preamble \definecolor{highlightcolor}{RGB}{225,15,0} and then contain this equation. \begin{equation} \int_a^b \textcolor{highlightcolor}{f'(x)}\,dx=f(b)-f(a) \end{equation} Typically the colors used in a document are declared in a class or style but sometimes you want a one-off. Those are the second forms in the synopses. Colors of \textcolor[rgb]{0.33,0.14,0.47}{Purple} and {\color[rgb]{0.72,0.60,0.37}Gold} for the team. The format of COLOR SPECIFICATION depends on the color model (*note Color models::). For instance, while ‘rgb’ takes three numbers, ‘gray’ takes only one. The selection was \textcolor[gray]{0.5}{grayed out}. Colors inside colors do not combine. Thus \textcolor{green}{kind of \textcolor{blue}{blue}} has a final word that is blue, not a combination of blue and green. 21.3.3 Colored boxes -------------------- Synopses: \colorbox{NAME}{...} \colorbox[MODEL NAME]{BOX BACKGROUND COLOR}{...} or \fcolorbox{FRAME COLOR}{BOX BACKGROUND COLOR}{...} \fcolorbox[MODEL NAME]{FRAME COLOR}{BOX BACKGROUND COLOR}{...} Make a box with the stated background color. The ‘\fcolorbox’ command puts a frame around the box. For instance this Name:~\colorbox{cyan}{\makebox[5cm][l]{\strut}} makes a cyan-colored box that is five centimeters long and gets its depth and height from the ‘\strut’ (so the depth is ‘-.3\baselineskip’ and the height is ‘\baselineskip’). This puts white text on a blue background. \colorbox{blue}{\textcolor{white}{Welcome to the machine.}} The ‘\fcolorbox’ commands use the same parameters as ‘\fbox’ (*note \fbox & \framebox::), ‘\fboxrule’ and ‘\fboxsep’, to set the thickness of the rule and the boundary between the box interior and the surrounding rule. LaTeX’s defaults are ‘0.4pt’ and ‘3pt’, respectively. This example changes the thickness of the border to 0.8 points. Note that it is surrounded by curly braces so that the change ends at the end of the second line. {\setlength{\fboxrule}{0.8pt} \fcolorbox{black}{red}{Under no circumstances turn this knob.}} 21.3.4 Colored pages -------------------- Synopses: \pagecolor{NAME} \pagecolor[COLOR MODEL]{COLOR SPECIFICATION} \nopagecolor The first two set the background of the page, and all subsequent pages, to the color. For an explanation of the specification in the second form *note Colored text::. The third returns the background to normal, which is a transparent background. (If that is not supported use ‘\pagecolor{white}’, although that will make a white background rather than the default transparent background.) ... \pagecolor{cyan} ... \nopagecolor 22 Graphics *********** You can use graphics such as PNG or PDF files in your LaTeX document. You need an additional package, which comes standard with LaTeX. This example is the short how-to. \include{graphicx} % goes in the preamble ... \includegraphics[width=0.5\linewidth]{plot.pdf} To use the commands described here your document preamble must contain either ‘\usepackage{graphicx}’ or ‘\usepackage{graphics}’. Most of the time, ‘graphicx’ is the better choice. Graphics come in two main types, raster and vector. LaTeX can use both. In raster graphics the file contains an entry for each location in an array, describing what color it is. An example is a photograph in JPG format. In vector graphics, the file contains a list of instructions such as ‘draw a circle with this radius and that center’. An example is a line drawing produced by the Asymptote program, in PDF format. Generally vector graphics are more useful because you can rescale their size without pixelation or other problems, and because they often have a smaller size. There are systems particularly well-suited to make graphics for a LaTeX document. For example, these allow you to use the same fonts as in your document. LaTeX comes with a ‘picture’ environment (*note picture::) that has simple capabilities. Besides that, there are other ways to include the graphic-making commands in the document. Two such systems are the PSTricks and TikZ packages. There are also systems external to LaTeX, that generate a graphic that you include using the commands of this chapter. Two that use a programming language are Asymptote and MetaPost. One that uses a graphical interface is Xfig. Full description of these systems is outside the scope of this document; see their documentation on CTAN. 22.1 ‘graphics’ package options =============================== Synopsis (must be in the document preamble): \usepackage[COMMA-SEPARATED OPTION LIST]{graphics} or \usepackage[COMMA-SEPARATED OPTION LIST]{graphicx} The ‘graphicx’ package has a format for optional arguments to the ‘\includegraphics’ command that is convenient (it is the key-value format), so it is the better choice for new documents. When you load the ‘graphics’ or ‘graphicx’ package with ‘\usepackage’ there are two kinds of available options. The first is that LaTeX does not contain information about different output systems but instead depends on information stored in a “printer driver” file. Normally you should not specify the driver option in the document, and instead rely on your system’s default. One advantage of this is that it makes the document portable across systems. For completeness here is a list of the drivers. The currently relevant ones are: ‘dvipdfmx’, ‘dvips’, ‘dvisvgm’, ‘luatex’, ‘pdftex’, ‘xetex’. The two ‘xdvi’ and ‘oztex’ are essentially aliases for ‘dvips’ (and ‘xdvi’ is monochrome). Ones that should not be used for new systems are: ‘dvipdf’, ‘dvipdfm’, ‘dviwin’, ‘dvipsone’, ‘emtex’, ‘pctexps’, ‘pctexwin’, ‘pctexhp’, ‘pctex32’, ‘truetex’, ‘tcidvi’, ‘vtex’ (and ‘dviwindo’ is an alias for ‘dvipsone’). These are stored in files with a ‘.def’ extension, such as ‘pdftex.def’. The second kind of options are below. ‘demo’ Instead of an image file, LaTeX puts in a 150 pt by 100 pt rectangle (unless another size is specified in the ‘\includegraphics’ command). ‘draft’ For each graphic file, it is not shown but instead its file name is printed in a box of the correct size. In order to determine the size, the file must be present. ‘final’ (Default) Override any previous ‘draft’ option, so that the document shows the contents of the graphic files. ‘hiderotate’ Do not show rotated text. (This allows for the possibility that a previewer does not have the capability to rotate text.) ‘hidescale’ Do not show scaled text. (This allows for the possibility that a previewer does not have the capability to scale.) ‘hiresbb’ In a PS or EPS file the graphic size may be specified in two ways. The ‘%%BoundingBox’ lines describe the graphic size using integer multiples of a PostScript point, that is, integer multiples of 1/72 inch. A later addition to the PostScript language allows decimal multiples, such as 1.23, in ‘%%HiResBoundingBox’ lines. This option has LaTeX to read the size from the latter. 22.2 ‘graphics’ package configuration ===================================== These commands configure the way LaTeX searches the file system for the graphic. The behavior of file system search code is necessarily platform dependent. In this document we cover GNU/Linux, Macintosh, and Windows, as those systems are typically configured. For other situations consult the documentation in ‘grfguide.pdf’, or the LaTeX source, or your TeX distribution’s documentation. 22.2.1 ‘\graphicspath’ ---------------------- Synopsis: \graphicspath{LIST OF DIRECTORIES INSIDE CURLY BRACES} Declare a list of directories to search for graphics files. This allows you to later say something like ‘\includegraphics{lion.png}’ instead of having to give its path. LaTeX always looks for graphic files first in the current directory (and the output directory, if specified; *note output directory::). The declaration below tells the system to then look in the subdirectory ‘pix’, and then ‘../pix’. \usepackage{graphicx} % or graphics; put in preamble ... \graphicspath{ {pix/} {../pix/} } The ‘\graphicspath’ declaration is optional. If you don’t include it then LaTeX’s default is to search all of the places that it usually looks for a file (it uses LaTeX’s ‘\input@path’). In particular, in this case one of the places it looks is the current directory. Enclose each directory name in curly braces; for example, above it says ‘‘{pix}’’. Do this even if there is only one directory. Each directory name must end in a forward slash, ‘/’. This is true even on Windows, where good practice is to use forward slashes for all the directory separators since it makes the document portable to other platforms. If you have spaces in your directory name then use double quotes, as with ‘{"my docs/"}’. Getting one of these rules wrong will cause LaTeX to report ‘Error: File `FILENAME' not found’. Basically, the algorithm is that with this example, after looking in the current directory, \graphicspath{ {pix/} {../pix/} } ... \usepackage{lion.png} for each of the listed directories, LaTeX concatenates it with the filename and searches for the result, checking for ‘pix/lion.png’ and then ‘../pix/lion.png’. This algorithm means that the ‘\graphicspath’ command does not recursively search subdirectories: if you issue ‘\graphicspath{{a/}}’ and the graphic is in ‘a/b/lion.png’ then LaTeX will not find it. It also means that you can use absolute paths such as ‘\graphicspath{{/home/jim/logos/}}’ or ‘\graphicspath{{C:/Users/Albert/Pictures/}}’. However, using these means that the document is not portable. (You could preserve portability by adjusting your TeX system settings configuration file parameter ‘TEXINPUTS’; see the documentation of your system.) You can use ‘\graphicspath’ anywhere in the document. You can use it more than once. Show its value with ‘\makeatletter\typeout{\Ginput@path}\makeatother’. The directories are taken with respect to the base file. That is, suppose that you are working on a document based on ‘book/book.tex’ and it contains ‘\include{chapters/chap1}’. If in ‘chap1.tex’ you put ‘\graphicspath{{plots/}}’ then LaTeX will not search for graphics in ‘book/chapters/plots’, but instead in ‘book/plots’. 22.2.2 ‘\DeclareGraphicsExtensions’ ----------------------------------- Synopses: \DeclareGraphicsExtensions{COMMA-SEPARATED LIST OF FILE EXTENSIONS} Declare the filename extensions to try. This allows you to specify the order in which to choose graphic formats when you include graphic files by giving the filename without the extension, as in ‘\includegraphics{functionplot}’. In this example, LaTeX will find files in the PNG format before PDF files. \DeclareGraphicsExtensions{.png,PNG,.pdf,.PDF} ... \includegraphics{lion} % will find lion.png before lion.pdf Because the filename ‘lion’ does not have a period, LaTeX uses the extension list. For each directory in the graphics path (*note \graphicspath::), LaTeX will try the extensions in the order given. If it does not find such a file after trying all the directories and extensions then it reports ‘! LaTeX Error: File `‘lion’' not found’. Note that you must include the periods at the start of the extensions. Because GNU/Linux and Macintosh filenames are case sensitive, the list of file extensions is case sensitive on those platforms. The Windows platform is not case sensitive. You are not required to include ‘\DeclareGraphicsExtensions’ in your document; the printer driver has a sensible default. For example, the most recent ‘pdftex.def’ has this extension list. .pdf,.png,.jpg,.mps,.jpeg,.jbig2,.jb2,.PDF,.PNG,.JPG,.JPEG,.JBIG2,.JB2 To change the order, use the ‘grfext’ package. You can use this command anywhere in the document. You can use it more than once. Show its value with ‘\makeatletter\typeout{\Gin@extensions}\makeatother’. 22.2.3 ‘\DeclareGraphicsRule’ ----------------------------- Synopsis: \DeclareGraphicsRule{EXTENSION}{TYPE}{SIZE-FILE EXTENSION}{COMMAND} Declare how to handle graphic files whose names end in EXTENSION. This example declares that all files with names of the form ‘filename-without-dot.mps’ will be treated as output from MetaPost, meaning that the printer driver will use its MetaPost-handling code to input the file. \DeclareGraphicsRule{.mps}{mps}{.mps}{} This \DeclareGraphicsRule{*}{mps}{*}{} tells LaTeX that it should handle as MetaPost output any file with an extension not covered by another rule, so it covers ‘filename.1’, ‘filename.2’, etc. This describes the four arguments. EXTENSION The file extension to which this rule applies. The extension is anything after and including the first dot in the filename. Use the Kleene star, ‘*’, to denote the default behavior for all undeclared extensions. TYPE The type of file involved. This type is a string that must be defined in the printer driver. For instance, files with extensions ‘.ps’, ‘.eps’, or ‘.ps.gz’ may all be classed as type ‘eps’. All files of the same type will be input with the same internal command by the printer driver. For example, the file types that ‘pdftex’ recognizes are: ‘jpg’, ‘jbig2’, ‘mps’, ‘pdf’, ‘png’, ‘tif’. SIZE-FILE EXTENSION The extension of the file to be read to determine the size of the graphic, if there is such a file. It may be the same as EXTENSION but it may be different. As an example, consider a PostScript graphic. To make it smaller, it might be compressed into a ‘.ps.gz’ file. Compressed files are not easily read by LaTeX so you can put the bounding box information in a separate file. If SIZE-FILE EXTENSION is empty then you must specify size information in the arguments of ‘\includegraphics’. If the driver file has a procedure for reading size files for ‘type’ then that will be used, otherwise it will use the procedure for reading ‘.eps’ files. (Thus you may specify the size of bitmap files in a file with a PostScript style ‘%%BoundingBox’ line if no other format is available.) COMMAND A command that will be applied to the file. This is often left empty. This command must start with a single backward quote. Thus, ‘\DeclareGraphicsRule{.eps.gz}{eps}{.eps.bb}{`gunzip -c #1}’ specifies that any file with the extension ‘.eps.gz’ should be treated as an ‘eps’ file, with the BoundingBox information stored in the file with extension ‘.eps.bb’, and that the command ‘gunzip -c’ will run on your platform to decompresses the file. Such a command is specific to your platform. In addition, your TeX system must allow you to run external commands; as a security measure modern systems restrict running commands unless you explicitly allow it. See the documentation for your TeX distribution. 22.3 Commands for graphics ========================== These are the commands available with the ‘graphics’ and ‘graphicx’ packages. 22.3.1 ‘\includegraphics’ ------------------------- Synopses for ‘graphics’ package: \includegraphics{FILENAME} \includegraphics[URX,URY]{FILENAME} \includegraphics[LLX,LLY][URX,URY]{FILENAME} \includegraphics*{FILENAME} \includegraphics*[URX,URY]{FILENAME} \includegraphics*[LLX,LLY][URX,URY]{FILENAME} Synopses for ‘graphicx’ package: \includegraphics{FILENAME} \includegraphics[KEY-VALUE LIST]{FILENAME} \includegraphics*{FILENAME} \includegraphics*[KEY-VALUE LIST]{FILENAME} Include a graphics file. The starred form ‘\includegraphics*’ will clip the graphic to the size specified, while for the unstarred form any part of the graphic that is outside the box of the specified size will over-print the surrounding area. This \usepackage{graphicx} % in preamble ... \begin{center} \includegraphics{plot.pdf} \end{center} will incorporate into the document the graphic in ‘plot.pdf’, centered and at its nominal size. You can also give a path to the file, as with ‘\includegraphics{graphics/plot.pdf}’. To specify a list of locations to search for the file, *note \graphicspath::. If your filename includes spaces then put it in double quotes. An example is ‘\includegraphics{"sister picture.jpg"}’. The ‘\includegraphics{FILENAME}’ command decides on the type of graphic by splitting FILENAME on the first dot. You can instead use FILENAME with no dot, as in ‘\includegraphics{turing}’, and then LaTeX tries a sequence of extensions such as ‘.png’ and ‘.pdf’ until it finds a file with that extension (*note \DeclareGraphicsExtensions::). If your file name contains dots before the extension then you can hide them with curly braces, as in ‘\includegraphics{{plot.2018.03.12.a}.pdf}’. Or, if you use the ‘graphicx’ package then you can use the options ‘type’ and ‘ext’; see below. This and other filename issues are also handled with the package ‘grffile’. This example puts a graphic in a ‘figure’ environment so LaTeX can move it to the next page if fitting it on the current page is awkward (*note figure::). \begin{figure} \centering \includegraphics[width=3cm]{lungxray.jpg} \caption{The evidence is overwhelming: don't smoke.} \label{fig:xray} \end{figure} This places a graphic that will not float, so it is sure to appear at this point in the document even if makes LaTeX stretch the text or resort to blank areas on the page. It will be centered and will have a caption. \usepackage{caption} % in preamble ... \begin{center} \includegraphics{pix/nix.png} \captionof{figure}{The spirit of the night} \label{pix:nix} % optional \end{center} This example puts a box with a graphic side by side with one having text, with the two vertically centered. \newcommand*{\vcenteredhbox}[1]{\begin{tabular}{@{}c@{}}#1\end{tabular}} ... \begin{center} \vcenteredhbox{\includegraphics[width=0.4\textwidth]{plot}} \hspace{1em} \vcenteredhbox{\begin{minipage}{0.4\textwidth} \begin{displaymath} f(x)=x\cdot \sin (1/x) \end{displaymath} \end{minipage}} \end{center} If you use the ‘graphics’ package then the only options involve the size of the graphic (but see *note \rotatebox:: and *note \scalebox::). When one optional argument is present then it is ‘[URX,URY]’ and it gives the coordinates of the top right corner of the image, as a pair of TeX dimensions (*note Units of length::). If the units are omitted they default to ‘bp’. In this case, the lower left corner of the image is assumed to be at (0,0). If two optional arguments are present then the leading one is ‘[LLX,LLY]’, specifying the coordinates of the image’s lower left. Thus, ‘\includegraphics[1in,0.618in]{...}’ calls for the graphic to be placed so it is 1 inch wide and 0.618 inches tall and so its origin is at (0,0). The ‘graphicx’ package gives you many more options. Specify them in a key-value form, as here. \begin{center} \includegraphics[width=1in,angle=90]{lion} \hspace{2em} \includegraphics[angle=90,width=1in]{lion} \end{center} The options are read left-to-right. So the first graphic above is made one inch wide and then rotated, while the second is rotated and then made one inch wide. Thus, unless the graphic is perfectly square, the two will end with different widths and heights. There are many options. The primary ones are listed first. Note that a graphic is placed by LaTeX into a box, which is traditionally referred to as its “bounding box” (distinct from the PostScript BoundingBox described below). The graphic’s printed area may go beyond this box, or sit inside this box, but when LaTeX makes up a page it puts together boxes and this is the box allocated for the graphic. ‘width’ The graphic will be shown so its bounding box is this width. An example is ‘\includegraphics[width=1in]{plot}’. You can use the standard TeX dimensions (*note Units of length::) and also convenient is ‘\linewidth’, or in a two-column document, ‘\columnwidth’ (*note Page layout parameters::). An example is that by using the ‘calc’ package you can make the graphic be 1 cm narrower than the width of the text with ‘\includegraphics[width=\linewidth-1.0cm]{hefferon.jpg}’. ‘height’ The graphic will be shown so its bounding box is this height. You can use the standard TeX dimensions (*note Units of length::), and also convenient are ‘\pageheight’ and ‘\textheight’ (*note Page layout parameters::). For instance, the command ‘\includegraphics[height=0.25\textheight]{godel}’ will make the graphic a quarter of the height of the text area. ‘totalheight’ The graphic will be shown so its bounding box has this height plus depth. This differs from the height if the graphic was rotated. For instance, if it has been rotated by -90 then it will have zero height but a large depth. ‘keepaspectratio’ If set to ‘true’, or just specified as here \includegraphics[...,keepaspectratio,...]{...} and you give as options both ‘width’ and ‘height’ (or ‘totalheight’), then LaTeX will make the graphic is as large as possible without distortion. That is, LaTeX will ensure that neither is the graphic wider than ‘width’ nor taller than ‘height’ (or ‘totalheight’). ‘scale’ Factor by which to scale the graphic. To make a graphic twice its nominal size, enter ‘\includegraphics[scale=2.0]{...}’. This number may be any value; a number between 0 and 1 will shrink the graphic and a negative number will reflect it. ‘angle’ Rotate the graphic. The angle is taken in degrees and counterclockwise. The graphic is rotated about its ‘origin’; see that option. For a complete description of how rotated material is typeset, *note \rotatebox::. ‘origin’ The point of the graphic about which the rotation happens. Possible values are any string containing one or two of: ‘l’ for left, ‘r’ for right, ‘b’ for bottom, ‘c’ for center, ‘t’ for top, and ‘B’ for baseline. Thus, entering the command ‘\includegraphics[angle=180,origin=c]{moon}’ will turn the picture upside down about that picture’s center, while the command ‘\includegraphics[angle=180,origin=lB]{LeBateau}’ will turn its picture upside down about its left baseline. (The character ‘c’ gives the horizontal center in ‘bc’ or ‘tc’, but gives the vertical center in ‘lc’ or ‘rc’.) The default is ‘lB’. To rotate about an arbitrary point, *note \rotatebox::. These are lesser-used options. ‘viewport’ Pick out a subregion of the graphic to show. Takes four arguments, separated by spaces and given in TeX dimensions, as with ‘\includegraphics[.., viewport=0in 0in 1in 0.618in]{...}’. When the unit is omitted, the dimensions default to big points, ‘bp’. They are taken relative to the origin specified by the bounding box. See also the ‘trim’ option. ‘trim’ Gives parts of the graphic to not show. Takes four arguments, separated by spaces, that are given in TeX dimensions, as with ‘\includegraphics[.., trim= 0in 0.1in 0.2in 0.3in, ...]{...}’. These give the amounts of the graphic not to show, that is, LaTeX will crop the picture by 0 inches on the left, 0.1 inches on the bottom, 0.2 inches on the right, and 0.3 inches on the top. See also the ‘viewport’ option. ‘clip’ If set to ‘true’, or just specified as here \includegraphics[...,clip,...]{...} then the graphic is cropped to the bounding box. This is the same as using the starred form of the command, ‘\includegraphics*[...]{...}’. ‘page’ Give the page number of a multi-page PDF file. The default is ‘page=1’. ‘pagebox’ Specifies which bounding box to use for PDF files from among ‘mediabox’, ‘cropbox’, ‘bleedbox’, ‘trimbox’, or ‘artbox’. PDF files do not have the BoundingBox that PostScript files have, but may specify up to four predefined rectangles. The MediaBox gives the boundaries of the physical medium. The CropBox is the region to which the contents of the page are to be clipped when displayed. The BleedBox is the region to which the contents of the page should be clipped in production. The TrimBox is the intended dimensions of the finished page. The ArtBox is the extent of the page’s meaningful content. The driver will set the image size based on CropBox if present, otherwise it will not use one of the others, with a driver-defined order of preference. MediaBox is always present. ‘interpolate’ Enable or disable interpolation of raster images by the viewer. Can be set with ‘interpolate=true’ or just specified as here. \includegraphics[...,interpolate,...]{...} ‘quiet’ Do not write information to the log. You can set it with ‘quiet=true’ or just specified it with ‘\includegraphics[...,quiet,...]{...}’, ‘draft’ If you set it with ‘draft=true’ or just specify it with \includegraphics[...,draft,...]{...} then the graphic will not appear in the document, possibly saving color printer ink. Instead, LaTeX will put an empty box of the correct size with the filename printed in it. These options address the bounding box for Encapsulated PostScript graphic files, which have a size specified with a line ‘%%BoundingBox’ that appears in the file. It has four values, giving the lower x coordinate, lower y coordinate, upper x coordinate, and upper y coordinate. The units are PostScript points, equivalent to TeX’s big points, 1/72 inch. For example, if an ‘.eps’ file has the line ‘%%BoundingBox 10 20 40 80’ then its natural size is 30/72 inch wide by 60/72 inch tall. ‘bb’ Specify the bounding box of the displayed region. The argument is four dimensions separated by spaces, as with ‘\includegraphics[.., bb= 0in 0in 1in 0.618in]{...}’. Usually ‘\includegraphics’ reads the BoundingBox numbers from the EPS file automatically, so this option is only useful if the bounding box is missing from that file or if you want to change it. ‘bbllx, bblly, bburx, bbury’ Set the bounding box. These four are obsolete, but are retained for compatibility with old packages. ‘natwidth, natheight’ An alternative for ‘bb’. Setting \includegraphics[...,natwidth=1in,natheight=0.618in,...]{...} is the same as setting ‘bb=0 0 1in 0.618in’. ‘hiresbb’ If set to ‘true’, or just specified as with \includegraphics[...,hiresbb,...]{...} then LaTeX will look for ‘%%HiResBoundingBox’ lines instead of ‘%%BoundingBox’ lines. (The ‘BoundingBox’ lines use only natural numbers while the ‘HiResBoundingBox’ lines use decimals; both use units equivalent to TeX’s big points, 1/72 inch.) To override a prior setting of ‘true’, you can set it to ‘false’. These following options allow a user to override LaTeX’s method of choosing the graphic type based on the filename extension. An example is that ‘\includegraphics[type=png,ext=.xxx,read=.xxx]{lion}’ will read the file ‘lion.xxx’ as though it were ‘lion.png’. For more on these, *note \DeclareGraphicsRule::. ‘type’ Specify the graphics type. ‘ext’ Specify the graphics extension. Only use this in conjunction with the option ‘type’. ‘read’ Specify the file extension of the read file. Only use this in conjunction with the option ‘type’. ‘command’ Specify a command to be applied to this file. Only use this in conjunction with the option ‘type’. *Note Command line options::, for a discussion of enabling the ‘\write18’ functionality to run external commands. 22.3.2 ‘\rotatebox’ ------------------- Synopsis if you use the ‘graphics’ package: \rotatebox{ANGLE}{MATERIAL} Synopses if you use the ‘graphicx’ package: \rotatebox{ANGLE}{MATERIAL} \rotatebox[KEY-VALUE LIST]{ANGLE}{MATERIAL} Put MATERIAL in a box and rotate it ANGLE degrees counterclockwise. This example rotates the table column heads forty-five degrees. \begin{tabular}{ll} \rotatebox{45}{Character} &\rotatebox{45}{NATO phonetic} \\ A &AL-FAH \\ B &BRAH-VOH \end{tabular} The MATERIAL can be anything that goes in a box, including a graphic. \rotatebox[origin=c]{45}{\includegraphics[width=1in]{lion}} To place the rotated material, the first step is that LaTeX sets MATERIAL in a box, with a reference point on the left baseline. The second step is the rotation, by default about the reference point. The third step is that LaTeX computes a box to bound the rotated material. Fourth, LaTeX moves this box horizontally so that the left edge of this new bounding box coincides with the left edge of the box from the first step (they need not coincide vertically). This new bounding box, in its new position, is what LaTeX uses as the box when typesetting this material. If you use the ‘graphics’ package then the rotation is about the reference point of the box. If you use the ‘graphicx’ package then these are the options that can go in the KEY-VALUE LIST, but note that you can get the same effect without needing this package, except for the ‘x’ and ‘y’ options (*note \includegraphics::). ‘origin’ The point of the MATERIAL’s box about which the rotation happens. Possible value is any string containing one or two of: ‘l’ for left, ‘r’ for right, ‘b’ for bottom, ‘c’ for center, ‘t’ for top, and ‘B’ for baseline. Thus, the first line here \rotatebox[origin=c]{180}{moon} \rotatebox[origin=lB]{180}{LeBateau} will turn the picture upside down from the center while the second will turn its picture upside down about its left baseline. (The character ‘c’ gives the horizontal center in ‘bc’ or ‘tc’ but gives the vertical center in ‘lc’ or ‘rc’, and gives both in ‘c’.) The default is ‘lB’. ‘x, y’ Specify an arbitrary point of rotation with ‘\rotatebox[x=TeX DIMENSION,y=TeX DIMENSION]{...}’ (*note Units of length::). These give the offset from the box’s reference point. ‘units’ This key allows you to change the default of degrees counterclockwise. Setting ‘units=-360’ changes the direction to degrees clockwise and setting ‘units=6.283185’ changes to radians counterclockwise. 22.3.3 ‘\scalebox’ ------------------ Synopses: \scalebox{HORIZONTAL FACTOR}{MATERIAL} \scalebox{HORIZONTAL FACTOR}[VERTICAL FACTOR]{MATERIAL} \reflectbox{MATERIAL} Scale the MATERIAL. This example halves the size, both horizontally and vertically, of the first text and doubles the size of the second. \scalebox{0.5}{DRINK ME} and \scalebox{2.0}{Eat Me} If you do not specify the optional VERTICAL FACTOR then it defaults to the same value as the HORIZONTAL FACTOR. You can use this command to resize a graphic, as here. \scalebox{0.5}{\includegraphics{lion}} If you use the ‘graphicx’ package then you can accomplish the same thing with optional arguments to ‘\includegraphics’ (*note \includegraphics::). The ‘\reflectbox’ command abbreviates ‘\scalebox{-1}[1]{MATERIAL}’. Thus, ‘Able was I\reflectbox{Able was I}’ will show the phrase ‘Able was I’ immediately followed by its mirror reflection against a vertical axis. 22.3.4 ‘\resizebox’ ------------------- Synopses: \resizebox{HORIZONTAL LENGTH}{VERTICAL LENGTH}{MATERIAL} \resizebox*{HORIZONTAL LENGTH}{VERTICAL LENGTH}{MATERIAL} Given a size, such as ‘3cm’, transform MATERIAL to make it that size. If either HORIZONTAL LENGTH or VERTICAL LENGTH is an exclamation point ‘!’ then the other argument is used to determine a scale factor for both directions. This example makes the graphic be a half inch wide and scales it vertically by the same factor to keep it from being distorted. \resizebox{0.5in}{!}{\includegraphics{lion}} The unstarred form ‘\resizebox’ takes VERTICAL LENGTH to be the box’s height while the starred form ‘\resizebox*’ takes it to be height+depth. For instance, make the text have a height+depth of a quarter-inch with ‘\resizebox*{!}{0.25in}{\parbox{3.5in}{This box has both height and depth.}}’. You can use ‘\depth’, ‘\height’, ‘\totalheight’, and ‘\width’ to refer to the original size of the box. Thus, make the text two inches wide but keep the original height with ‘\resizebox{2in}{\height}{Two inches}’. 23 Special insertions ********************* LaTeX provides commands for inserting characters that have a special meaning do not correspond to simple characters you can type. 23.1 Reserved characters ======================== LaTeX sets aside the following characters for special purposes. For example, the percent sign ‘%’ is for comments. They are called “reserved characters” or “special characters”. They are all discussed elsewhere in this manual. # $ % & { } _ ~ ^ \ If you want a reserved character to be printed as itself, in the text body font, for all but the final three characters in that list simply put a backslash ‘\’ in front of the character. Thus, typing ‘\$1.23’ will produce ‘$1.23’ in your output. As to the last three characters, to get a tilde in the text body font use ‘\~{}’ (omitting the curly braces would result in the next character receiving a tilde accent). Similarly, to get a text body font circumflex use ‘\^{}’. To get a backslash in the font of the text body, enter ‘\textbackslash{}’. To produce the reserved characters in a typewriter font use ‘\verb!!’ as below (the double backslash ‘\\’ in the example is only there to split the lines in the output). \begin{center} \# \$ \% \& \{ \} \_ \~{} \^{} \textbackslash \\ \verb!# $ % & { } _ ~ ^ \! \end{center} 23.2 Upper and lower case ========================= Synopsis: \uppercase{TEXT} \lowercase{TEXT} \MakeUppercase{TEXT} \MakeLowercase{TEXT} Change the case of characters. The TeX primitive commands ‘\uppercase’ and ‘\lowercase’ are set up by default to work only with the 26 letters a–z and A–Z. The LaTeX commands ‘\MakeUppercase’ and ‘\MakeLowercase’ commands also change characters accessed by commands such as ‘\ae’ or ‘\aa’. The commands ‘\MakeUppercase’ and ‘\MakeLowercase’ are robust but they have moving arguments (*note \protect::). These commands do not change the case of letters used in the name of a command within TEXT. But they do change the case of every other Latin letter inside the argument TEXT. Thus, ‘\MakeUppercase{Let $y=f(x)$’} produces ‘LET Y=F(X)’. Another example is that the name of an environment will be changed, so that ‘\MakeUppercase{\begin{tabular} ... \end{tabular}}’ will produce an error because the first half is changed to ‘\begin{TABULAR}’. LaTeX uses the same fixed table for changing case throughout a document, The table used is designed for the font encoding T1; this works well with the standard TeX fonts for all Latin alphabets but will cause problems when using other alphabets. To change the case of text that results from a macro inside TEXT you need to do expansion. Here the ‘\Schoolname’ produces ‘COLLEGE OF MATHEMATICS’. \newcommand{\schoolname}{College of Mathematics} \newcommand{\Schoolname}{\expandafter\MakeUppercase \expandafter{\schoolname}} The ‘textcase’ package brings some of the missing feature of the standard LaTeX commands ‘\MakeUppercase’ and ‘\MakeLowerCase’. To uppercase only the first letter of words, you can use the package ‘mfirstuc’. Handling all the casing rules specified by Unicode, e.g., for non-Latin scripts, is a much bigger job than anything envisioned in the original TeX and LaTeX. It has been implemented in the ‘expl3’ package as of 2020. The article “Case changing: From TeX primitives to the Unicode algorithm”, (Joseph Wright, ‘TUGboat’ 41:1, ), gives a good overview of the topic, past and present. 23.3 Symbols by font position ============================= You can access any character of the current font using its number with the ‘\symbol’ command. For example, the visible space character used in the ‘\verb*’ command has the code decimal 32 in the standard Computer Modern typewriter font, so it can be typed as ‘\symbol{32}’. You can also specify numbers in octal (base 8) by using a ‘'’ prefix, or hexadecimal (base 16) with a ‘"’ prefix, so the visible space at 32 decimal could also be written as ‘\symbol{'40}’ or ‘\symbol{"20}’. 23.4 Text symbols ================= LaTeX provides commands to generate a number of non-letter symbols in running text. Some of these, especially the more obscure ones, are not available in OT1. As of the LaTeX February 2020 release, all symbols are available by default; before that, it was necessary to use the ‘textcomp’ package for some (technically, those in the ‘TS1’ font encoding). ‘\copyright’ ‘\textcopyright’ © The copyright symbol. ‘\dag’ † The dagger symbol (in text). ‘\ddag’ ‡ The double dagger symbol (in text). ‘\LaTeX’ The LaTeX logo. ‘\LaTeXe’ The LaTeX2e logo. ‘\guillemotleft («)’ ‘\guillemotright (»)’ ‘\guilsinglleft (‹)’ ‘\guilsinglright (›)’ «, », ‹, › Double and single angle quotation marks, commonly used in French. ‘\ldots’ ‘\textellipsis’ ‘\dots’ ... An ellipsis (three dots at the baseline): ‘\ldots’ and ‘\dots’ also work in math mode (*note Dots::). See that math mode ellipsis description for additional general information. ‘\lq’ ‘ Left (opening) quote. ‘\P’ ‘\textparagraph’ ¶ Paragraph sign (pilcrow). ‘\pounds’ ‘\textsterling’ £ English pounds sterling. ‘\quotedblbase („)’ ‘\quotesinglbase (‚)’ „ and ‚ Double and single quotation marks on the baseline. ‘\rq’ ’ Right (closing) quote. ‘\S’ ‘\textsection’ § Section sign. ‘\TeX’ The TeX logo. ‘\textasciicircum’ ^ ASCII circumflex. ‘\textasciitilde’ ~ ASCII tilde. ‘\textasteriskcentered’ * Centered asterisk. ‘\textbackslash’ \ Backslash. However, ‘\texttt{\textbackslash}’ produces a roman (not typewriter) backslash by default; for a typewriter backslash, it is necessary to use the T1 (or other non-default) font encoding, as in: \usepackage[T1]{fontenc} ‘\textbar’ | Vertical bar. ‘\textbardbl’ ⏸ Double vertical bar. ‘\textbigcircle’ ◯, Big circle symbol. ‘\textbraceleft’ { Left brace. See remarks at ‘\textbackslash’ above about making ‘\texttt{\textbraceleft}’ produce a typewriter brace. ‘\textbraceright’ } Right brace. See remarks at ‘\textbackslash’ above about making ‘\texttt{\textbraceright}’ produce a typewriter brace. ‘\textbullet’ • Bullet. ‘\textcircled{LETTER}’ Ⓐ, Circle around LETTER. ‘\textcompwordmark’ ‘\textcapitalcompwordmark’ ‘\textascendercompwordmark’ Used to separate letters that would normally ligature. For example, ‘f\textcompwordmark i’ produces ‘fi’ without a ligature. This is most useful in non-English languages. The ‘\textcapitalcompwordmark’ form has the cap height of the font while the ‘\textascendercompwordmark’ form has the ascender height. ‘\textdagger’ † Dagger. ‘\textdaggerdbl’ ‡ Double dagger. ‘\textdollar (or ‘\$’)’ $ Dollar sign. ‘\textemdash (or ‘---’)’ — Em-dash. Used for punctuation, usually similar to commas or parentheses, as in ‘‘The playoffs---if you're lucky enough to make the playoffs---are more like a sprint.’’ Conventions for spacing around em-dashes vary widely. ‘\textendash (or ‘--’)’ – En-dash. Used for ranges, as in ‘‘see pages 12--14’’. ‘\texteuro’ The Euro currency symbol: €. For an alternative glyph design, try the ‘eurosym’ package; also, most fonts nowadays come with their own Euro symbol (Unicode U+20AC). ‘\textexclamdown (or ‘!`’)’ ¡ Upside down exclamation point. ‘\textfiguredash’ Dash used between numerals, Unicode U+2012. Defined in the June 2021 release of LaTeX. When used in pdfTeX, approximated by an en-dash; with a Unicode engine, either typesets the glyph if available in the current font, or writes the usual “Missing character” warning to the log file. ‘\textgreater’ > Greater than symbol. ‘\texthorizontalbar’ Horizontal bar character, Unicode U+2015. Defined in the June 2021 release of LaTeX. Behavior as with ‘\textfiguredash’ above; the pdfTeX approximation is an em-dash. ‘\textless’ < Less than symbol. ‘\textleftarrow’ ←, Left arrow. ‘\textnonbreakinghyphen’ Non-breaking hyphen character, Unicode U+2011. Defined in the June 2021 release of LaTeX. Behavior as with ‘\textfiguredash’ above; the pdfTeX approximation is a regular ASCII hyphen (with breaks disallowed after). ‘\textordfeminine’ ‘\textordmasculine’ ª, º Feminine and masculine ordinal symbols. ‘\textperiodcentered’ · Centered period. ‘\textquestiondown (or ‘?`’)’ ¿ Upside down question mark. ‘\textquotedblleft (or ‘``’)’ “ Double left quote. ‘\textquotedblright (or ‘''’)’ ” Double right quote. ‘\textquoteleft (or ‘`’)’ ‘ Single left quote. ‘\textquoteright (or ‘'’)’ ’ Single right quote. ‘\textquotesingle’ ', Straight single quote. (From TS1 encoding.) ‘\textquotestraightbase’ ‘\textquotestraightdblbase’ Single and double straight quotes on the baseline. ‘\textregistered’ ® Registered symbol. ‘\textrightarrow’ →, Right arrow. ‘\textthreequartersemdash’ ﹘, “Three-quarters” em-dash, between en-dash and em-dash. ‘\texttrademark’ ™ Trademark symbol. ‘\texttwelveudash’ ﹘, “Two-thirds” em-dash, between en-dash and em-dash. ‘\textunderscore’ _ Underscore. ‘\textvisiblespace’ ␣, Visible space symbol. 23.5 Accents ============ LaTeX has wide support for many of the world’s scripts and languages, provided through the core ‘babel’ package, which supports pdfLaTeX, XeLaTeX and LuaLaTeX. The ‘polyglossia’ package provides similar support with the latter two engines. This section does not cover that support. It only lists the core LaTeX commands for creating accented characters. The ‘\capital...’ commands shown here produce alternative forms for use with capital letters. These are not available with OT1. Below, to make them easier to find, the accents are all illustrated with lowercase ‘o’. Note that ‘\i’ produces a dotless i, and ‘\j’ produces a dotless j. These are often used in place of their dotted counterparts when they are accented. ‘\"’ ‘\capitaldieresis’ ö Umlaut (dieresis). ‘\'’ ‘\capitalacute’ ó Acute accent. ‘\.’ ȯ Dot accent. ‘\=’ ‘\capitalmacron’ ō Macron (overbar) accent. ‘\^’ ‘\capitalcircumflex’ ô Circumflex (hat) accent. ‘\`’ ‘\capitalgrave’ ò Grave accent. ‘\~’ ‘\capitaltilde’ ñ Tilde accent. ‘\b’ o̲ Bar accent underneath. Related to this, ‘\underbar{TEXT}’ produces a bar under TEXT. The argument is always processed in LR mode (*note Modes::). The bar is always a fixed position under the baseline, thus crossing through descenders. See also ‘\underline’ in *note Over- and Underlining::. ‘\c’ ‘\capitalcedilla’ ç Cedilla accent underneath. ‘\d’ ‘\capitaldotaccent’ ọ Dot accent underneath. ‘\H’ ‘\capitalhungarumlaut’ ő Long Hungarian umlaut accent. ‘\k’ ‘\capitalogonek’ ǫ Ogonek. Not available in the OT1 encoding. ‘\r’ ‘\capitalring’ o̊ Ring accent. ‘\t’ ‘\capitaltie’ ‘\newtie’ ‘\capitalnewtie’ Tie-after accent (used for transliterating from Cyrillic, such as in the ALA-LC romanization). It expects that the argument has two characters. The ‘\newtie’ form is centered in its box. ‘\u’ ‘\capitalbreve’ ŏ Breve accent. ‘\v’ ‘\capitalcaron’ ǒ Háček (check, caron) accent. 23.5.1 ‘\accent’ ---------------- Synopsis: \accent NUMBER CHARACTER A TeX primitive command used to generate accented characters from accent marks and letters. The accent mark is selected by NUMBER, a numeric argument, followed by a space and then a CHARACTER argument to construct the accented character in the current font. These are accented ‘e’ characters. \accent18 e \accent20 e \accent21 e \accent22 e \accent23 e The first is a grave, the second a caron, the third a breve, the fourth a macron, and the fifth a ring above. The position of the accent is determined by the font designer and so the outcome of ‘\accent’ use may differ between fonts. In LaTeX it is desirable to have glyphs for accented characters rather than building them using ‘\accent’. Using glyphs that already contain the accented characters (as in T1 encoding) allows correct hyphenation whereas ‘\accent’ disables hyphenation (specifically with OT1 font encoding where accented glyphs are absent). There can be an optional font change between NUMBER and CHARACTER. Note also that this command sets the ‘\spacefactor’ to 1000 (*note \spacefactor::). An unavoidable characteristic of some Cyrillic letters and the majority of accented Cyrillic letters is that they must be assembled from multiple elements (accents, modifiers, etc.) while ‘\accent’ provides for a single accent mark and a single letter combination. There are also cases where accents must appear between letters that \accent does not support. Still other cases exist where the letters I and J have dots above their lowercase counterparts that conflict with dotted accent marks. The use of ‘\accent’ in these cases will not work as it cannot analyze upper/lower case. 23.6 Additional Latin letters ============================= Here are the basic LaTeX commands for inserting letters beyond A–Z that extend the Latin alphabet, used primarily in languages other than English. ‘\aa’ ‘\AA’ å and Å. ‘\ae’ ‘\AE’ æ and Æ. ‘\dh’ ‘\DH’ Icelandic letter eth: ð and Ð. Not available with OT1 encoding, you need the ‘fontenc’ package to select an alternate font encoding, such as T1. ‘\dj’ ‘\DJ’ Crossed d and D, a.k.a. capital and small letter d with stroke. Not available with OT1 encoding, you need the ‘fontenc’ package to select an alternate font encoding, such as T1. ‘\ij’ ‘\IJ’ ij and IJ (except somewhat closer together than appears here). ‘\l’ ‘\L’ ł and Ł. ‘\ng’ ‘\NG’ Lappish letter eng, also used in phonetics. ‘\o’ ‘\O’ ø and Ø. ‘\oe’ ‘\OE’ œ and Œ. ‘\ss’ ‘\SS’ ß and SS. ‘\th’ ‘\TH’ Icelandic letter thorn: þ and Þ. Not available with OT1 encoding, you need the ‘fontenc’ package to select an alternate font encoding, such as T1. 23.7 ‘inputenc’ package ======================= Synopsis: \usepackage[ENCODING-NAME]{inputenc} Declare the input file’s text encoding to be ENCODING-NAME. The default, if this package is not loaded, is UTF-8. Technically, specifying the encoding name is optional, but in practice it is not useful to omit it. In a computer file, the characters are stored according to a scheme called the “encoding”. There are many different encodings. The simplest is ASCII, which supports 95 printable characters, not enough for most of the world’s languages. For instance, to typeset the a-umlaut character ‘ä’ in an ASCII-encoded LaTeX source file, the sequence ‘\"a’ is used. This would make source files for anything but English hard to read; even for English, often a more extensive encoding is more convenient. The modern encoding standard, in some ways a union of the others, is UTF-8, one of the representations of Unicode. This is the default for LaTeX since 2018. The ‘inputenc’ package is how LaTeX knows what encoding is used. For instance, the following command explicitly says that the input file is UTF-8 (note the lack of a dash). \usepackage[utf8]{inputenc} Caution: use ‘inputenc’ only with the pdfTeX engine (*note TeX engines::). (The XeTeX and LuaTeX engines assume that the input file is UTF-8 encoded.) If you invoke LaTeX with either the ‘xelatex’ command or the ‘lualatex’ command, and try to declare a non-UTF-8 encoding with ‘inputenc’, such as ‘latin1’, then you will get the error ‘inputenc is not designed for xetex or luatex’. An ‘inputenc’ package error such as ‘Invalid UTF-8 byte "96’ means that some of the material in the input file does not follow the encoding scheme. Often these errors come from copying material from a document that uses a different encoding than the input file; this one is a left single quote from a web page using ‘latin1’ inside a LaTeX input file that uses UTF-8. The simplest solution is to replace the non-UTF-8 character with its UTF-8 equivalent, or use a LaTeX equivalent command or character. In some documents, such as a collection of journal articles from a variety of authors, changing the encoding in mid-document may be necessary. Use the command ‘\inputencoding{ENCODING-NAME}’. The most common values for ENCODING-NAME are: ‘ascii’, ‘latin1’, ‘latin2’, ‘latin3’, ‘latin4’, ‘latin5’, ‘latin9’, ‘latin10’, and ‘utf8’. 23.8 ‘\rule’ ============ Synopsis, one of: \rule{WIDTH}{THICKNESS} \rule[RAISE]{WIDTH}{THICKNESS} Produce a “rule”, a filled-in rectangle. This example produces a rectangular blob, sometimes called a Halmos symbol, or just “qed”, often used to mark the end of a proof: \newcommand{\qedsymbol}{\rule{0.4em}{2ex}} The ‘amsthm’ package includes this command, with a somewhat different-looking symbol. The mandatory arguments give the horizontal WIDTH and vertical THICKNESS of the rectangle. They are rigid lengths (*note Lengths::). The optional argument RAISE is also a rigid length, and tells LaTeX how much to raise the rule above the baseline, or lower it if the length is negative. This produces a line, a rectangle that is wide but not tall. \noindent\rule{\textwidth}{0.4pt} The line is the width of the page and 0.4 points tall. This line thickness is common in LaTeX. A rule that has zero width, or zero thickness, will not show up in the output, but can cause LaTeX to change the output around it. *Note \strut::, for examples. 23.9 ‘\today’ ============= Synopsis: \today Produce today’s date in the format ‘MONTH DD, YYYY’. An example of a date in that format is ‘July 4, 1976’. Multilingual packages such as ‘babel’ or ‘polyglossia’, or classes such as ‘lettre’, will localize ‘\today’. For example, the following will output ‘4 juillet 1976’: \year=1976 \month=7 \day=4 \documentclass{minimal} \usepackage[french]{babel} \begin{document} \today \end{document} ‘\today’ uses the counters ‘\day’, ‘\month’, and ‘\year’ (*note \day & \month & \year::). A number of package on CTAN work with dates. One is ‘datetime’ package which can produce a wide variety of date formats, including ISO standards. The date is not updated as the LaTeX process runs, so in principle the date could be incorrect by the time the program finishes. 24 Splitting the input ********************** LaTeX lets you split a large document into several smaller ones. This can simplify editing or allow multiple authors to work on the document. It can also speed processing. Regardless of how many separate files you use, there is always one “root file”, on which LaTeX compilation starts. This shows such a file with five included files. \documentclass{book} \includeonly{ % comment out lines below to omit compiling pref, chap1, chap2, append, bib } \begin{document} \frontmatter \include{pref} \mainmatter \include{chap1} \include{chap2} \appendix \include{append} \backmatter \include{bib} \end{document} This will bring in material from ‘pref.tex’, ‘chap1.tex’, ‘chap2.tex’, ‘append.tex’, and ‘bib.tex’. If you compile this file, and then comment out all of the lines inside ‘\includeonly{...}’ except for ‘chap1’, and compile again, then LaTeX will only process the material in the first chapter. Thus, your output will appear more quickly and be shorter to print. However, the advantage of the ‘\includeonly’ command is that LaTeX will retain the page numbers and all of the cross reference information from the other parts of the document so these will appear in your output correctly. *Note Larger book template::, for another example of ‘\includeonly’. 24.1 ‘\endinput’ ================ Synopsis: \endinput When you ‘\include{filename}’, inside ‘filename.tex’ the material after ‘\endinput’ will not be included. This command is optional; if ‘filename.tex’ has no ‘\endinput’ then LaTeX will read all of the file. For example, suppose that a document’s root file has ‘\input{chap1}’ and this is ‘chap1.tex’. \chapter{One} This material will appear in the document. \endinput This will not appear. This can be useful for putting documentation or comments at the end of a file, or for avoiding junk characters that can be added if the file is transmitted in the body of an email. It is also useful for debugging: one strategy to localize errors is to put ‘\endinput’ halfway through the included file and see if the error disappears. Now, knowing which half contains the error, moving ‘\endinput’ to halfway through that area further narrows down the location. This process rapidly finds the offending line. After reading ‘\endinput’, LaTeX continues to read to the end of the line, so something can follow this command and be read nonetheless. This allows you, for instance, to close an ‘\if...’ with a ‘\fi’. 24.2 ‘\include’ & ‘\includeonly’ ================================ Synopsis: \includeonly{ % in document preamble ... FILENAME, ... } ... \include{FILENAME} % in document body Bring material from the external file ‘FILENAME.tex’ into a LaTeX document. The ‘\include’ command does three things: it executes ‘\clearpage’ (*note \clearpage & \cleardoublepage::), then it inputs the material from ‘FILENAME.tex’ into the document, and then it does another ‘\clearpage’. This command can only appear in the document body. The ‘\includeonly’ command controls which files will be read by LaTeX under subsequent ‘\include’ commands. Its list of filenames is comma-separated. It must appear in the preamble or even earlier, e.g., the command line; it can’t appear in the document body. This example root document, ‘constitution.tex’, brings in three files, ‘preamble.tex’, ‘articles.tex’, and ‘amendments.tex’. \documentclass{book} \includeonly{ preamble, articles, amendments } \begin{document} \include{preamble} \include{articles} \include{amendments} \end{document} The file ‘preamble.tex’ contains no special code; you have just excerpted the chapter from ‘consitution.tex’ and put it in a separate file just for editing convenience. \chapter{Preamble} We the People of the United States, in Order to form a more perfect Union, ... Running LaTeX on ‘constitution.tex’ makes the material from the three files appear in the document but also generates the auxiliary files ‘preamble.aux’, ‘articles.aux’, and ‘amendments.aux’. These contain information such as page numbers and cross-references (*note Cross references::). If you now comment out ‘\includeonly’’s lines with ‘preamble’ and ‘amendments’ and run LaTeX again then the resulting document shows only the material from ‘articles.tex’, not the material from ‘preamble.tex’ or ‘amendments.tex’. Nonetheless, all of the auxiliary information from the omitted files is still there, including the starting page number of the chapter. If the document preamble does not have ‘\includeonly’ then LaTeX will include all the files you call for with ‘\include’ commands. The ‘\include’ command makes a new page. To avoid that, see *note \input:: (which, however, does not retain the auxiliary information). *Note Larger book template::, for another example using ‘\include’ and ‘\includeonly’. That example also uses ‘\input’ for some material that will not necessarily start on a new page. File names can involve paths. \documentclass{book} \includeonly{ chapters/chap1, } \begin{document} \include{chapters/chap1} \end{document} To make your document portable across distributions and platforms you should avoid spaces in the file names. The tradition is to instead use dashes or underscores. Nevertheless, for the name ‘amo amas amat’, this works under TeX Live on GNU/Linux: \documentclass{book} \includeonly{ "amo\space amas\space amat" } \begin{document} \include{"amo\space amas\space amat"} \end{document} and this works under MiKTeX on Windows: \documentclass{book} \includeonly{ {"amo amas amat"} } \begin{document} \include{{"amo amas amat"}} \end{document} You cannot use ‘\include’ inside a file that is being included or you get ‘LaTeX Error: \include cannot be nested.’ The ‘\include’ command cannot appear in the document preamble; you will get ‘LaTeX Error: Missing \begin{document}’. If a file that you ‘\include’ does not exist, for instance if you ‘\include{athiesm}’ but you meant ‘\include{atheism}’, then LaTeX does not give you an error but will warn you ‘No file athiesm.tex.’ (It will also create ‘athiesm.aux’.) If you ‘\include’ the root file in itself then you first get ‘LaTeX Error: Can be used only in preamble.’ Later runs get ‘TeX capacity exceeded, sorry [text input levels=15]’. To fix this, you must remove the inclusion ‘\include{ROOT}’ but also delete the file ‘ROOT.aux’ and rerun LaTeX. 24.3 ‘\input’ ============= Synopsis: \input{FILENAME} LaTeX processes the file as if its contents were inserted in the current file. For a more sophisticated inclusion mechanism see *note \include & \includeonly::. If FILENAME does not end in ‘.tex’ then LaTeX first tries the filename with that extension; this is the usual case. If FILENAME ends with ‘.tex’ then LaTeX looks for the filename as it is. For example, this \input{macros} will cause LaTeX to first look for ‘macros.tex’. If it finds that file then it processes its contents as thought they had been copy-pasted in. If there is no file of the name ‘macros.tex’ then LaTeX tries the name ‘macros’, without an extension. (This may vary by distribution.) To make your document portable across distributions and platforms you should avoid spaces in the file names. The tradition is to instead use dashes or underscores. Nevertheless, for the name ‘amo amas amat’, this works under TeX Live on GNU/Linux: \input{"amo\space amas\space amat"} and this works under MiKTeX on Windows: \input{{"amo amas amat"}} 25 Front/back matter ******************** 25.1 Table of contents, list of figures, list of tables ======================================================= Synopsis, one of: \tableofcontents \listoffigures \listoftables Produce a table of contents, or list of figures, or list of tables. Put the command in the input file where you want the table or list to go. You do not type the entries; for example, typically the table of contents entries are automatically generated from the sectioning commands ‘\chapter’, etc. This example illustrates the first command, ‘\tableofcontents’. LaTeX will produce a table of contents on the book’s first page. \documentclass{book} % \setcounter{tocdepth}{1} \begin{document} \tableofcontents\newpage ... \chapter{...} ... \section{...} ... \subsection{...} ... \end{document} Uncommenting the second line would cause that table to contain chapter and section listings but not subsection listings, because the ‘\section’ command has level 1. *Note Sectioning::, for level numbers of the sectioning units. For more on the ‘tocdepth’ *note Sectioning/tocdepth::. Another example of the use of ‘\tableofcontents’ is in *note Larger book template::. If you want a page break after the table of contents, write a ‘\newpage’ command after the ‘\tableofcontents’ command, as above. To make the table of contents, LaTeX stores the information in an auxiliary file named ‘ROOT-FILE.toc’ (*note Splitting the input::). For example, this LaTeX file ‘test.tex’ \documentclass{article} \begin{document} \tableofcontents\newpage \section{First section} \subsection{First subsection} ... writes these lines to ‘test.toc’. \contentsline {section}{\numberline {1}First section}{2} \contentsline {subsection}{\numberline {1.1}First subsection}{2} Each line contains a single command, ‘\contentsline’ (*note \contentsline::). The first argument, the ‘section’ or ‘subsection’, is the sectioning unit. The second argument has two components. The hook ‘\numberline’ determines how the sectioning number, ‘1’ or ‘1.1’, appears in the table of contents (*note \numberline::). The remainder of the second argument of ‘\contentsline’, ‘First section’ or ‘First subsection’, is the sectioning title text. Finally, the third argument, ‘2’, is the page number on which this sectioning unit starts. To typeset these lines, the document class provides ‘\l@SECTION-UNIT’ commands such as ‘\l@section{TEXT}{PAGENUMBER}’ and ‘\l@subsection{TEXT}{PAGENUMBER}’. These commands often use the ‘\@dottedtocline’ command (*note \@dottedtocline::). A consequence of LaTeX’s strategy of using auxiliary files is that to get the correct information in the document you must run LaTeX twice, once to store the information and the second time to retrieve it. In the ordinary course of writing a document authors run LaTeX a number of times, but you may notice that the first time that you compile a new document, the table of contents page will be empty except for its ‘Contents’ header. Just run LaTeX again. The commands ‘\listoffigures’ and ‘\listoftables’ produce a list of figures and a list of tables. Their information is stored in files with extension ‘.lof’ and ‘.lot’. They work the same way as ‘\tableofcontents’ but the latter is more common, so we use it for most examples. You can manually add material to the table of contents, the list of figures, and the list of tables. For instance, add a line about a section to the table of contents with ‘\addcontentsline{toc}{section}{TEXT}’. (*note \addcontentsline::). Add arbitrary material, that is, non-line material, with ‘\addtocontents’, as with the command ‘\addtocontents{lof}{\protect\vspace{2ex}}’, which adds vertical space to the list of figures (*note \addtocontents::). Lines in the table of contents, the list of figures, and the list of tables, have four parts. First is an indent. Next is a box into which sectioning numbers are placed, and then the third box holds the title text, such as ‘First section’. Finally there is a box up against the right margin, inside of which LaTeX puts the page number box. For the indent and the width of the number box, *note \@dottedtocline::. The right margin box has width ‘\@tocrmarg’ and the page number is flush right in that space, inside a box of width ‘\@pnumwidth’. By default ‘\@tocrmarg’ is ‘2.55em’ and ‘\@pnumwidth’ is ‘1.55em’. Change these as with ‘\renewcommand{\@tocrmarg}{3.5em}’. CTAN has many packages for the table of contents and lists of figures and tables (*note CTAN::). The package ‘tocloft’ is convenient for adjusting some aspects of the default such as spacing. And, ‘tocbibbind’ will automatically add the bibliography, index, etc. to the table of contents. To change the header for the table of contents page, do something like these commands before you call ‘\tableofcontents’, etc. \renewcommand{\contentsname}{Table of Contents} \renewcommand{\listfigurename}{Plots} \renewcommand{\listtablename}{Specifications} Internationalization packages such as ‘babel’ or ‘polyglossia’ will change these headers depending on the chosen base language. 25.1.1 ‘\@dottedtocline’ ------------------------ Synopsis: \@dottedtocline{SECTION-LEVEL-NUM}{INDENT}{NUMWIDTH}{TEXT}{PAGENUMBER} Used internally by LaTeX to format an entry line in the table of contents, list of figures, or list of tables. Authors do not directly enter ‘\@dottedtocline’ commands. This command is typically used by ‘\l@section’, ‘\l@subsection’, etc., to format the content lines. For example, the ‘article.cls’ file contains these definitions: \newcommand*\l@section{\@dottedtocline{1}{1.5em}{2.3em}} \newcommand*\l@subsection{\@dottedtocline{2}{3.8em}{3.2em}} \newcommand*\l@subsubsection{\@dottedtocline{3}{7.0em}{4.1em}} In this example, ‘\@dottedcline’ appears to have been given only three arguments. But tracing the internal code shows that it picks up the final TEXT and PAGENUMBER arguments in the synopsis from a call to ‘\contentsline’ (*note \contentsline::). Between the box for the title text of a section and the right margin box, these ‘\@dottedtocline’ commands insert “leaders”, that is, evenly-spaced dots. The dot-to-dot space is given by the command ‘\@dotsep’. By default it is 4.5 (it is in math units, aka. ‘mu’, which are ‘1/18’ em. Change it using ‘\renewcommand’, as in ‘\renewcommand{\@dotsep}{3.5}’. In the standard ‘book’ class, LaTeX does not use dotted leaders for the Part and Chapter table entries, and in the standard ‘article’ class it does not use dotted leaders for Section entries. 25.1.2 ‘\addcontentsline’ ------------------------- Synopsis: \addcontentsline{EXT}{UNIT}{TEXT} Add an entry to the auxiliary file with extension EXT. The following will result in an ‘Appendices’ line in the table of contents. \addcontentsline{toc}{section}{\protect\textbf{Appendices}} It will appear at the same indentation level as the sections, will be in boldface, and will be assigned the page number associated with the point where the command appears in the input file. The ‘\addcontentsline’ command writes information to the file ‘ROOT-NAME.EXT’, where ROOT-NAME is the file name of the root file (*note Splitting the input::). It writes that information as the text of the command ‘\contentsline{UNIT}{TEXT}{NUM}’, where ‘NUM’ is the current value of counter ‘UNIT’ (*note \contentsline::). The most common case is the table of contents and there NUM is the page number of the first page of UNIT. This command is invoked by the sectioning commands ‘\chapter’, etc. (*note Sectioning::), and also by ‘\caption’ inside a float environment (*note Floats::). But it is also directly used by authors. For example, an author writing a book whose style is to have an unnumbered preface may use the starred ‘\chapter*’. But that command leaves out table of contents information, which can be entered manually, as here. \chapter*{Preface} \addcontentsline{toc}{chapter}{\protect\numberline{}Preface} In the ‘ROOT-NAME.toc’ file LaTeX will put the line ‘\contentsline {chapter}{\numberline {}Preface}{3}’; note that the page number ‘3’ is automatically generated by the system, not entered manually. All of the arguments for ‘\addcontentsline’ are required. EXT Typically one of the strings ‘toc’ for the table of contents, ‘lof’ for the list of figures, or ‘lot’ for the list of tables. The filename extension of the information file. UNIT A string that depends on the value of the EXT argument, typically one of: ‘toc’ For the table of contents, this is the name of a sectional unit: ‘part’, ‘chapter’, ‘section’, ‘subsection’, etc. ‘lof’ For the list of figures: ‘figure’. ‘lot’ For the list of tables: ‘table’. TEXT The text of the entry. You must ‘\protect’ any fragile commands (*note \protect::) used in it. The ‘\addcontentsline’ command has an interaction with ‘\include’ (*note \include & \includeonly::). If you use them at the same level, as with ‘\addcontentsline{...}{...}{...}\include{...}’ then lines in the table of contents can come out in the wrong order. The solution is to move ‘\addcontentsline’ into the file being included. If you use a UNIT that LaTeX does not recognize, as with the typo here \addcontentsline{toc}{setcion}{\protect\textbf{Appendices}} then you don’t get an error but the formatting in the table of contents will not make sense. 25.1.3 ‘\addtocontents’ ----------------------- Synopsis: \addtocontents{EXT}{TEXT} Add TEXT, which may be text or formatting commands, directly to the auxiliary file with extension EXT. This is most commonly used for the table of contents so that is the discussion here, but it also applies to the list of figures and list of tables. This will put some vertical space in the table of contents after the ‘Contents’ header. \tableofcontents\newpage \addtocontents{toc}{\protect\vspace*{3ex}} This puts the word ‘Page’, in boldface, above the column of page numbers and after the header. \tableofcontents \addtocontents{toc}{~\hfill\textbf{Page}\par} \chapter{...} This adds a line announcing work by a new author. \addtocontents{toc}{% \protect\vspace{2ex} \textbf{Chapters by N. Other Author}\par} The difference between ‘\addtocontents’ and ‘\addcontentsline’ is that the latter is strictly for lines, such as with a line giving the page number for the start of a new subset of the chapters. As the above examples show, ‘\addtocontents’ is for material such as spacing. The ‘\addtocontents’ command has two arguments. Both are required. EXT Typically one of: ‘toc’ for the table of contents, ‘lof’ for the list of figures, or ‘lot’ for the list of tables. The extension of the file holding the information. TEXT The text, and possibly commands, to be written. The sectioning commands such as ‘\chapter’ use the ‘\addcontentsline’ command to store information. This command creates lines in the ‘.toc’ auxiliary file containing the ‘\contentsline’ command (*note \addcontentsline::). In contrast, the command ‘\addtocontents’ puts material directly in that file. The ‘\addtocontents’ command has an interaction with ‘\include’ (*note \include & \includeonly::). If you use them at the same level, as with ‘\addtocontents{...}{...}\include{...}’ then lines in the table of contents can come out in the wrong order. The solution is to move ‘\addtocontents’ into the file being included. 25.1.4 ‘\contentsline’ ---------------------- Synopsis: \contentsline{UNIT}{TEXT}{PAGENUMBER} Used internally by LaTeX to typeset an entry of the table of contents, list of figures, or list of tables (*note Table of contents etc.::). Authors do not directly enter ‘\contentsline’ commands. Usually adding material to these lists is done automatically by the commands ‘\chapter’, ‘\section’, etc. for the table of contents, or by the ‘\caption’ command inside of a ‘\figure’ or ‘\table’ environment (*note figure:: and *note table::). Thus, where the root file is ‘thesis.tex’, and contains the declaration ‘\tableofcontents’, the command ‘\chapter{Chapter One}’ produces something like this in the file ‘thesis.toc’. \contentsline {chapter}{\numberline {1}Chapter One}{3} If the file contains the declaration ‘\listoffigures’ then a figure environment involving ‘\caption{Test}’ will produce something like this in ‘thesis.lof’. \contentsline {figure}{\numberline {1.1}{\ignorespaces Test}}{6} To manually add material, use ‘\addcontentsline{FILETYPE}{UNIT}{TEXT}’, where FILETYPE is ‘toc’, ‘lof’, or ‘lot’ (*note \addcontentsline::). For manipulating how the ‘\contentline’ material is typeset, see the ‘tocloft’ package. Note that the ‘hyperref’ package changes the definition of ‘\contentsline’ (and ‘\addcontentsline’) to add more arguments, to make hyperlinks. This is the source of the error ‘Argument of \contentsline has an extra }’ when one adds/remove the use of package ‘hyperref’ and a compilation was already run. Fix this error by deleting the ‘.toc’ or ‘.lof’ or ‘.lot’ file, and running LaTeX again. 25.1.5 ‘\nofiles’ ----------------- Synopsis: \nofiles Prevent LaTeX from writing any auxiliary files. The only output will be the ‘.log’ and ‘.pdf’ (or ‘.dvi’) files. This command must go in the preamble. Because of the ‘\nofiles’ command this example will not produce a ‘.toc’ file. \documentclass{book} \nofiles \begin{document} \tableofcontents\newpage \chapter{...} ... LaTeX will not erase any existing auxiliary files, so if you insert the ‘\nofiles’ command after you have run the file and gotten a ‘.toc’ then the table of contents page will continue to show the old information. 25.1.6 ‘\numberline’ -------------------- Synopsis: \numberline{NUMBER} Typeset its argument flush left in a box. This is used in a ‘\contentsline’ command to typeset the section number (*note \contentsline::). For example, this line in a ‘.toc’ file causes the ‘1.1’ to be typeset flush left. \contentsline {subsection}{\numberline {1.1}Motivation}{2} By default, LaTeX typesets the section numbers in a box of length ‘\@tempdima’. That length is set by the commands ‘\l@section’, ‘\l@subsection’, etc. Put section numbers inside a natural-width box with ‘\renewcommand{\numberline}[1]{#1~}’ before ‘\tableofcontents’. This command is fragile so you may need to precede it with ‘\protect’ (*note \protect::). An example is the use of ‘\protect’ in this command, \addcontentsline{toc}{section}{\protect\numberline{}Summary} to get the ‘\numberline’ into the ‘\contentsline’ command in the ‘.toc’ file: ‘\contentsline {section}{\numberline {}Summary}{6}’ (the page number ‘6’ is automatically added by LaTeX; *note \addcontentsline::). 25.2 Indexes ============ If you tell LaTeX what terms you want to appear in an index then it can produce that index, alphabetized and with the page numbers automatically maintained. This illustrates the basics. \documentclass{article} \usepackage{makeidx} % Provide indexing commands \makeindex % \usepackage{showidx} % Show marginal notes of index entries ... \begin{document} ... Wilson's Theorem\index{Wilson's Theorem} says that a number $n>1$ is prime if and only if the factorial of $n-1$ is congruent to $-1$ modulo~$n$.\index{congruence!and Wilson's Theorem} ... \printindex \end{document} As that shows, declare index entries with the ‘\index’ command (*note \index::). When you run LaTeX, the ‘\index’ writes its information, such as ‘Wilson's Theorem’ and the page number, to an auxiliary file whose name ends in ‘.idx’. Next, to alphabetize and do other manipulations, run an external command, typically ‘makeindex’ (*note makeindex::), which writes a file whose name ends in ‘.ind’. Finally, ‘\printindex’ brings this manipulated information into the output (*note \printindex::). Thus, if the above example is in the file ‘numth.tex’ then running ‘pdflatex numth’ will save index entry and page number information to ‘numth.idx’. Then running ‘makeindex numth’ will alphabetize and save the results to ‘numth.ind’. Finally, again running ‘pdflatex numth’ will show the desired index, at the place where the ‘\printindex’ command is in the source file. There are many options for the output. An example is that the exclamation point in ‘\index{congruence!and Wilson's Theorem}’ produces a main entry of ‘congruence’ with a subentry of ‘and Wilson's Theorem’. For more, *note makeindex::. The ‘\makeindex’ and ‘\printindex’ commands are independent. Leaving out the ‘\makeindex’ will stop LaTeX from saving the index entries to the auxiliary file. Leaving out the ‘\printindex’ will cause LaTeX to not show the index in the document output. There are many packages in the area of indexing. The ‘showidx’ package causes each index entries to be shown in the margin on the page where the ‘\index’ appears. This can help in preparing the index. The ‘multind’ package, among others, supports multiple indexes. See also the TeX FAQ entry on this topic, , and the CTAN topic, . 25.2.1 Produce the index manually --------------------------------- Documents that are small and static can have a manually produced index. This will make a separate page labeled ‘Index’, in twocolumn format. \begin{theindex} \item acorn squash, 1 \subitem maple baked, 2 \indexspace \item bacon, 3 \subitem maple baked, 4 \end{theindex} Note that the author must enter the page numbers, which is tedious and which will result in wrong numbers if the document changes. This is why in most cases automated methods such as ‘makeindex’ are best. *Note Indexes::. However we cover the commands for completeness, and because the automated methods are based on these commands. There are three levels of entries. As the example shows, a main entry uses ‘\item’, subentries use ‘\subitem’, and the lowest level uses ‘\subsubitem’. Blank lines between entries have no effect. The example above includes ‘\indexspace’ to produce vertical space in the output that some index styles use before the first entry starting with a new letter. 25.2.2 ‘\index’ --------------- Synopsis: \index{INDEX-ENTRY-STRING} Declare an entry in the index. This command is fragile (*note \protect::). For example, as described in *note Indexes::, one way to get an index from what’s below is to compile the document with ‘pdflatex test’, then process the index entries with ‘makeindex test’, and then compile again with ‘pdflatex test’. % file test.tex ... W~Ackermann (1896--1962).\index{Ackermann} ... Ackermann function\index{Ackermann!function} ... rate of growth\index{Ackermann!function!growth rate} All three index entries will get a page number, such as ‘Ackermann, 22’. LaTeX will format the second as a subitem of the first, on the line below it and indented, and the third as a subitem of the second. Three levels deep is as far as you can nest subentries. (If you add ‘\index{Ackermann!function!growth rate!comparison}’ then ‘makeindex’ says ‘Scanning input file test.idx....done (4 entries accepted, 1 rejected)’ and the fourth level is silently missing from the index.) If you enter a second ‘\index’ with the same INDEX-ENTRY-STRING then you will get a single index entry with two page numbers (unless they happen to fall on the same page). Thus, adding ‘as for Ackermann.\index{Ackermann}’ later in the same document as above will give an index entry like ‘Ackermann, 22, 151’. Also, you can enter the index entries in any order, so for instance ‘\index{Ackermann!function}’ could come before ‘\index{Ackermann}’. Get a page range in the output, like ‘Hilbert, 23--27’, as here. W~Ackermann (1896--1962).\index{Ackermann} ... D~Hilbert (1862--1943)\index{Ackermann!Hilbert|(} ... disapproved of his marriage.\index{Ackermann!Hilbert|)} If the beginning and ending of the page range are equal then the system just gives a single page number, not a range. If you index subentries but not a main entry, as with ‘\index{Jones!program}’ and ‘\index{Jones!results}’, then the output is the item ‘Jones’ with no comma or page number, followed by two subitems, like ‘program, 50’ and ‘results, 51’. Generate a index entry that says ‘see’ by using a vertical bar character: ‘\index{Ackermann!function|see{P\'eter's function}}’. You can instead get ‘see also’ with ‘seealso’. (The text ‘see’ is defined by ‘\seename’, and ‘see also’ by ‘\alsoname’. You can redefine these either by using an internationalization package such as ‘babel’ or ‘polyglossia’, or directly as with ‘\renewcommand{\alsoname}{Also see}’.) The ‘see’ feature is part of a more general functionality. After the vertical bar you can put the name of a one-input command, as in ‘\index{group|textit}’ (note the missing backslash on the ‘\textit’ command) and the system will apply that command to the page number, here giving something like ‘\textit{7}’. You can define your own one-input commands, such as ‘\newcommand{\definedpage}[1]{{\color{blue}#1}}’ and then ‘\index{Ackermann!function|definedpage}’ will give a blue page number (*note Color::). Another, less practical, example is this, \newcommand\indexownpage[1]{#1, \thepage} ... Epimenides.\index{self-reference|indexownpage} which creates an entry citing the page number of its own index listing. The two functions just described combine, as here \index{Ackermann!function|(definedpage} ... \index{Ackermann!function|)} which outputs an index entry like ‘function, 23--27’ where the page number range is in blue. Consider an index entry such as ‘α-ring’. Entering it as ‘$\alpha$-ring’ will cause it to be alphabetized according to the dollar sign. You can instead enter it using an at-sign, as ‘\index{alpha-ring@$\alpha$-ring}’. If you specify an entry with an at-sign separating two strings, ‘POS@TEXT’, then POS gives the alphabetical position of the entry while TEXT produces the text of the entry. Another example is that ‘\index{Saint Michael's College@SMC}’ produces an index entry ‘SMC’ alphabetized into a different location than its spelling would naturally give it. To put a ‘!’, or ‘@’, or ‘|’, or ‘"’ character in an index entry, escape it by preceding it with a double quote, ‘"’. (The double quote gets deleted before alphabetization.) A number of packages on CTAN have additional functionality beyond that provided by ‘makeidx’. One is ‘index’, which allows for multiple indices and contains a command ‘\index*{INDEX-ENTRY-STRING}’ that prints the INDEX-ENTRY-STRING as well as indexing it. The ‘\index’ command writes the indexing information to the file ‘ROOT-NAME.idx’ file. Specifically, it writes text of the command ‘\indexentry{INDEX-ENTRY-STRING}{PAGE-NUM}’, where PAGE-NUM is the value of the ‘\thepage’ counter. On occasion, when the ‘\printindex’ command is confused, you have to delete this file to start with a fresh slate. If you omit the closing brace of an ‘\index’ command then you get a message like this. Runaway argument? {Ackermann!function ! Paragraph ended before \@wrindex was complete. 25.2.3 ‘makeindex’ ------------------ Synopsis, one of: makeindex FILENAME makeindex -s STYLE-FILE FILENAME makeindex OPTIONS FILENAME0 ... Sort, and otherwise process, the index information in the auxiliary file FILENAME. This is a command line program. It takes one or more raw index files, ‘FILENAME.idx’ files, and produces the actual index file, the ‘FILENAME.ind’ file that is input by ‘\printindex’ (*note \printindex::). The first form of the command suffices for many uses. The second allows you to format the index by using an “index style file”, a ‘.isty’ file. The third form is the most general; see the full documentation on CTAN. This is a simple ‘.isty’ file. % book.isty % $ makeindex -s book.isty -p odd book.idx % creates the index as book.ind, starting on an odd page. preamble "\\pagestyle{empty} \\small \\begin{theindex} \\thispagestyle{empty}" postamble "\n \\end{theindex}" The description here covers only some of the index formatting possibilities in STYLE-FILE. For a full list see the documentation on CTAN. A style file consists of a list of pairs: SPECIFIER and ATTRIBUTE. These can appear in the file in any order. All of the ATTRIBUTEs are strings, except where noted. Strings are surrounded with double quotes, ‘"’, and the maximum length of a string is 144 characters. The ‘\n’ is for a newline and ‘\t’ is for a tab. Backslashes are escaped with another backslash, ‘\\’. If a line begins with a percent sign, ‘%’, then it is a comment. ‘preamble’ Preamble of the output index file. Defines the context in which the index is formatted. Default: ‘"\\begin{theindex}\n"’. ‘postamble’ Postamble of the output index file. Default: ‘"\n\n\\end{theindex}\n"’. ‘group_skip’ Traditionally index items are broken into groups, typically a group for entries starting with letter ‘a’, etc. This specifier gives what is inserted when a new group begins. Default: ‘"\n\n \\indexspace\n"’ (‘\indexspace’ is a command inserting a rubber length, by default ‘10pt plus5pt minus3pt’). ‘lethead_flag’ An integer. It governs what is inserted for a new group or letter. If it is 0 (which is the default) then other than ‘group_skip’ nothing will be inserted before the group. If it is positive then at a new letter the ‘lethead_prefix’ and ‘lethead_suffix’ will be inserted, with that letter in uppercase between them. If it is negative then what will be inserted is the letter in lowercase. The default is 0. ‘lethead_prefix’ If a new group begins with a different letter then this is the prefix inserted before the new letter header. Default: ‘""’ ‘lethead_suffix’ If a group begins with a different letter then this is the suffix inserted after the new letter header. Default: ‘""’. ‘item_0’ What is put between two level 0 items. Default: ‘"\n \\item "’. ‘item_1’ Put between two level 1 items. Default: ‘"\n \\subitem "’. ‘item_2’ put between two level 2 items. Default: ‘"\n \\subsubitem "’. ‘item_01’ What is put between a level 0 item and a level 1 item. Default: ‘"\n \\subitem "’. ‘item_x1’ What is put between a level 0 item and a level 1 item in the case that the level 0 item doesn’t have any page numbers (as in ‘\index{aaa|see{bbb}}’). Default: ‘"\n \\subitem "’. ‘item_12’ What is put between a level 1 item and a level 2 item. Default: ‘"\n \\subsubitem "’. ‘item_x2’ What is put between a level 1 item and a level 2 item, if the level 1 item doesn’t have page numbers. Default: ‘"\n \\subsubitem "’. ‘delim_0’ Delimiter put between a level 0 key and its first page number. Default: a comma followed by a blank, ‘", "’. ‘delim_1’ Delimiter put between a level 1 key and its first page number. Default: a comma followed by a blank, ‘", "’. ‘delim_2’ Delimiter between a level 2 key and its first page number. Default: a comma followed by a blank, ‘", "’. ‘delim_n’ Delimiter between two page numbers for the same key (at any level). Default: a comma followed by a blank, ‘", "’. ‘delim_r’ What is put between the starting and ending page numbers of a range. Default: ‘"--"’. ‘line_max’ An integer. Maximum length of an index entry’s line in the output, beyond which the line wraps. Default: ‘72’. ‘indent_space’ What is inserted at the start of a wrapped line. Default: ‘"\t\t"’. ‘indent_length’ A number. The length of the wrapped line indentation. The default ‘indent_space’ is two tabs and each tab is eight spaces so the default here is ‘16’. ‘page_precedence’ A document may have pages numbered in different ways. For example, a book may have front matter pages numbered in lowercase roman while main matter pages are in arabic. This string specifies the order in which they will appear in the index. The ‘makeindex’ command supports five different types of numerals: lowercase roman ‘r’, and numeric or arabic ‘n’, and lowercase alphabetic ‘a’, and uppercase roman ‘R’, and uppercase alphabetic ‘A’. Default: ‘"rnaRA"’. There are a number of other programs that do the job ‘makeindex’ does. One is ‘xindy’ (), which does internationalization and can process indexes for documents marked up using LaTeX and a number of other languages. It is written in Lisp, highly configurable, both in markup terms and in terms of the collating order of the text, as described in its documentation. A more recent indexing program supporting Unicode is ‘xindex’, written in Lua (). 25.2.4 ‘\printindex’ -------------------- Synopsis: \printindex Place the index into the output. To get an index you must first include ‘\usepackage{makeidx}\makeindex’ in the document preamble and compile the document, then run the system command ‘makeindex’, and then compile the document again. *Note Indexes::, for further discussion and an example of the use of ‘\printindex’. 25.3 Glossaries =============== Synopsis: \usepackage{glossaries} \makeglossaries ... \newglossaryentry{LABEL}{SETTINGS} ... \gls{LABEL}. ... \printglossaries The ‘glossaries’ package allows you to make glossaries, including multiple glossaries, as well as lists of acronyms. To get the output from this example, compile the document (for instance with ‘pdflatex filename’), then run the command line command ‘makeglossaries filename’, and then compile the document again. \documentclass{...} \usepackage{glossaries} \makeglossaries \newglossaryentry{tm}{% name={Turing machine}, description={A model of a machine that computes. The model is simple but can compute anything any existing device can compute. It is the standard model used in Computer Science.}, } \begin{document} Everything begins with the definition of a \gls{tm}. ... \printglossaries \end{document} That gives two things. In the main text it outputs ‘... definition of a Turing machine’. In addition, in a separate sectional unit headed ‘Glossary’ there appears a description list. In boldface it says ‘Turing machine’ and the rest of the item says in normal type ‘A model of a machine ... Computer Science’. The command ‘\makeglossary’ opens the file that will contain the entry information, ‘ROOT-FILE.glo’. Put the ‘\printglossaries’ command where you want the glossaries to appear in your document. The ‘glossaries’ package is very powerful. For instance, besides the commands ‘\newglossaryentry’ and ‘\gls’, there are similar commands for a list of acronyms. See the package documentations on CTAN. 25.3.1 ‘\newglossaryentry’ -------------------------- Synopsis, one of: \newglossaryentry{LABEL} { name={NAME}, description={DESCRIPTION}, OTHER OPTIONS, ... } or \longnewglossaryentry{LABEL} { name={NAME}, OTHER OPTIONS ..., } {DESCRIPTION} Declare a new entry for a glossary. The LABEL must be unique for the document. The settings associated with the label are pairs: ‘KEY=VALUE’. This puts the blackboard bold symbol for the real numbers ℝ, in the glossary. \newglossaryentry{R} { name={\ensuremath{\mathbb{R}}}, description={the real numbers}, } Use the second command form if the DESCRIPTION spans more than one paragraph. For a full list of KEYs see the package documentation on CTAN but here are a few. ‘name’ (Required.) The word, phrase, or symbol that you are defining. ‘description’ (Required.) The description that will appear in the glossary. If this has more than one paragraph then you must use the second command form given in the synopsis. ‘plural’ The plural form of NAME. Refer to the plural form using ‘\glspl’ or ‘\Glspl’ (*note \gls::). ‘sort’ How to place this entry in the list of entries that the glossary holds. ‘symbol’ A symbol, such as a mathematical symbol, besides the name. 25.3.2 ‘\gls’ ------------- Synopsis, one of: \gls{LABEL} \glspl{LABEL} \Gls{LABEL} \Glspl{LABEL} Refer to a glossary entry. The entries are declared with ‘\newglossaryentry’ (*note \newglossaryentry::). This \newglossaryentry{N}{% name={the natural numbers}, description={The numbers $0$, $1$, $2$, $\ldots$\@}, symbol={\ensuremath{\mathbb{N}}}, } ... Consider \gls{N}. gives the output ‘Consider the natural numbers’. The second command form ‘\glspl{LABEL}’ produces the plural of NAME (by default it tries adding an ‘s’). The third form capitalizes the first letter of NAME, as does the fourth form, which also takes the plural. 26 Letters ********** Synopsis: \documentclass{letter} \address{SENDERS ADDRESS} % return address \signature{SENDER NAME} \begin{document} \begin{letter}{RECIPIENT ADDRESS} \opening{SALUTATION} LETTER BODY \closing{CLOSING TEXT} \end{letter} ... \end{document} Produce one or more letters. Each letter is in a separate ‘letter’ environment, whose argument RECIPIENT ADDRESS often contains multiple lines separated with a double backslash, (‘\\’). For example, you might have: \begin{letter}{Ninon de l'Enclos \\ l'h\^otel Sagonne} ... \end{letter} The start of the ‘letter’ environment resets the page number to 1, and the footnote number to 1 also. The SENDER ADDRESS and SENDER NAME are common to all of the letters, whether there is one or more, so these are best put in the preamble. As with the recipient address, often SENDER ADDRESS contains multiple lines separated by a double backslash (‘\\’). LaTeX will put the SENDER NAME under the closing, after a vertical space for the traditional hand-written signature. Each ‘letter’ environment body begins with a required ‘\opening’ command such as ‘\opening{Dear Madam or Sir:}’. The LETTER BODY text is ordinary LaTeX so it can contain everything from enumerated lists to displayed math, except that commands such as ‘\chapter’ that make no sense in a letter are turned off. Each ‘letter’ environment body typically ends with a ‘\closing’ command such as ‘\closing{Yours,}’. Additional material may come after the ‘\closing’. You can say who is receiving a copy of the letter with a command like ‘\cc{the Boss \\ the Boss's Boss}’. There’s a similar ‘\encl’ command for a list of enclosures. And, you can add a postscript with ‘\ps’. LaTeX’s default is to indent the sender name and the closing above it by a length of ‘\longindentation’. By default this is ‘0.5\textwidth’. To make them flush left, put ‘\setlength{\longindentation}{0em}’ in your preamble. To set a fixed date use something like ‘\renewcommand{\today}{1958-Oct-12}’. If put in your preamble then it will apply to all the letters. This example shows only one ‘letter’ environment. The three lines marked as optional are typically omitted. \documentclass{letter} \address{Sender's street \\ Sender's town} \signature{Sender's name \\ Sender's title} % optional: \location{Mailbox 13} % optional: \telephone{(102) 555-0101} \begin{document} \begin{letter}{Recipient's name \\ Recipient's address} \opening{Sir:} % optional: \thispagestyle{firstpage} I am not interested in entering a business arrangement with you. \closing{Your most humble, etc.,} \end{letter} \end{document} These commands are used with the ‘letter’ class. 26.1 ‘\address’ =============== Synopsis: \address{SENDERS ADDRESS} Specify the return address, as it appears on the letter and on the envelope. Separate multiple lines in SENDERS ADDRESS with a double backslash, ‘\\’. Because it can apply to multiple letters this declaration is often put in the preamble. However, it can go anywhere, including inside an individual ‘letter’ environment. This command is optional: if you do not use it then the letter is formatted with some blank space on top, for copying onto pre-printed letterhead paper. If you do use the ‘\address’ declaration then it is formatted as a personal letter. Here is an example. \address{Stephen Maturin \\ The Grapes of the Savoy} 26.2 ‘\cc’ ========== Synopsis: \cc{NAME0 \\ ... } Produce a list of names to which copies of the letter were sent. This command is optional. If it appears then typically it comes after ‘\closing’. Put the names on different lines by separating them with a double backslash, ‘\\’, as in: \cc{President \\ Vice President} 26.3 ‘\closing’ =============== Synopsis: \closing{TEXT} Produce the letter’s closing. This is optional, but usual. It appears at the end of a letter, above a handwritten signature. For example: \closing{Regards,} 26.4 ‘\encl’ ============ Synopsis: \encl{FIRST ENCLOSED OBJECT \\ ... } Produce a list of things included with the letter. This command is optional; when it is used, it typically is put after ‘\closing’. Separate multiple lines with a double backslash, ‘\\’. \encl{License \\ Passport} 26.5 ‘\location’ ================ Synopsis: \location{TEXT} The TEXT appears centered at the bottom of the page. It only appears if the page style is ‘firstpage’. 26.6 ‘\makelabels’ ================== Synopsis: \makelabels % in preamble Optional, for a document that contains ‘letter’ environments. If you just put ‘\makelabels’ in the preamble then at the end of the document you will get a sheet with labels for all the recipients, one for each letter environment, that you can copy to a sheet of peel-off address labels. Customize the labels by redefining the commands ‘\startlabels’, ‘\mlabel’, and ‘\returnaddress’ (and perhaps ‘\name’) in the preamble. The command ‘\startlabels’ sets the width, height, number of columns, etc., of the page onto which the labels are printed. The command ‘\mlabel{RETURN ADDRESS}{RECIPIENT ADDRESS}’ produces the two labels (or one, if you choose to ignore the RETURN ADDRESS) for each letter environment. The first argument, RETURN ADDRESS, is the value returned by the macro ‘\returnaddress’. The second argument, RECIPIENT ADDRESS, is the value passed in the argument to the ‘letter’ environment. By default ‘\mlabel’ ignores the first argument, the RETURN ADDRESS, causing the default behavior described in the prior paragraph. This illustrates customization. Its output includes a page with two columns having two labels each. \documentclass{letter} \renewcommand*{\returnaddress}{Fred McGuilicuddy \\ Oshkosh, Mineola 12305} \newcommand*\originalMlabel{} \let\originalMlabel\mlabel \def\mlabel#1#2{\originalMlabel{}{#1}\originalMlabel{}{#2}} \makelabels ... \begin{document} \begin{letter}{A Einstein \\ 112 Mercer Street \\ Princeton, New Jersey, USA 08540} ... \end{letter} \begin{letter}{K G\"odel \\ 145 Linden Lane \\ Princeton, New Jersey, USA 08540} ... \end{letter} \end{document} The first column contains the return address twice. The second column contains the address for each recipient. The package ‘envlab’ makes formatting the labels easier, with standard sizes already provided. The preamble lines ‘\usepackage[personalenvelope]{envlab}’ and ‘\makelabels’ are all that you need to print envelopes. 26.7 ‘\name’ ============ Synopsis: \name{NAME} Optional. Sender’s name, used for printing on the envelope together with the return address. 26.8 ‘\opening’ =============== Synopsis: \opening{SALUTATION} Required. Follows the ‘\begin{letter}{...}’. The argument SALUTATION is mandatory. For instance: \opening{Dear John:} 26.9 ‘\ps’ ========== Synopsis: \ps{TEXT} Add a postscript. This command is optional and usually is used after ‘\closing’. \ps{P.S. After you have read this letter, burn it. Or eat it.} 26.10 ‘\signature’ ================== Synopsis: \signature{FIRST LINE \\ ... } The sender’s name. This command is optional, although its inclusion is usual. The argument text appears at the end of the letter, after the closing. LaTeX leaves some vertical space for a handwritten signature. Separate multiple lines with a double backslash, ‘\\’. For example: \signature{J Fred Muggs \\ White House} LaTeX’s default for the vertical space from the ‘\closing’ text down to the ‘\signature’ text is ‘6\medskipamount’, which is six times ‘\medskipamount’ (where ‘\medskipamount’ is equal to a ‘\parskip’, which in turn is defined by default here to 0.7em). This command is usually in the preamble, to apply to all the letters in the document. To have it apply to one letter only, put it inside a ‘letter’ environment and before the ‘\closing’. You can include a graphic in the signature as here. \signature{\vspace{-6\medskipamount}\includegraphics{sig.png}\\ My name} For this you must put ‘\usepackage{graphicx}’ in the preamble (*note Graphics::). 26.11 ‘\telephone’ ================== Synopsis: \telephone{NUMBER} The sender’s telephone number. This is typically in the preamble, where it applies to all letters. This only appears if the ‘firstpage’ pagestyle is selected. If so, it appears on the lower right of the page. 27 Input/output *************** LaTeX uses the ability to write to a file and later read it back in to build document components such as a table of contents or index. You can also read a file that other programs written, or write a file for others to read. You can communicate with users through the terminal. And, you can issue instructions for the operating system. 27.1 ‘\openin’ & ‘\openout’ =========================== Synopsis: \openin NUMBER=FILENAME or: \openout NUMBER=FILENAME Open a file for reading material, or for writing it. In most engines, the NUMBER must be between 0 and 15, as in ‘\openin3’; in LuaLaTeX, NUMBER can be between 0 and 127. Here TeX opens the file ‘presidents.tex’ for reading. \newread\presidentsfile \openin\presidentsfile=presidents \typeout{presidentsfile is \the\presidentsfile} \read\presidentsfile to\presidentline \typeout{\presidentline} The ‘\newread’ command allocates input stream numbers from 0 to 15 (there is also a ‘\newwrite’). The ‘\presidentsfile’ is more memorable but under the hood it is still a number; the first ‘\typeout’ gives something like ‘presidentsfile is 1’. In addition, ‘\newread’ keeps track of the allocation so that if you use too many then you get an error like ‘! No room for a new \read’. The second ‘\typeout’ gives the first line of the file, something like ‘1 Washington, George’. Ordinarily TeX will not try to open the file until the next page shipout. To change this, use ‘\immediate\openin NUMBER=FILENAME’ or ‘\immediate\openout NUMBER=FILENAME’. Close files with ‘\closein NUMBER’ and ‘\closeout NUMBER’. How LaTeX handles filenames varies among distributions, and even can vary among versions of a distribution. If the file does not have an extension then TeX will add a ‘.tex’. This creates ‘presidents.tex’, writes one line to it, and closes it. \newwrite\presidentsfile \openout\presidentsfile=presidents \write\presidentsfile{1 Washington, George} \closeout\presidentsfile But filenames with a period can cause trouble: if TeX finds a FILENAME of ‘presidents.dat’ it could look first for ‘presidents.dat.tex’ and later for ‘presidents.dat’, or it could do the opposite. Your distribution’s documentation should say more, and if you find something that works for you then you are good, but to ensure complete portability the best thing is to use file names containing only the twenty six ASCII letters (not case-sensitive) and the ten digits, along with underscore and dash, and in particular with no dot or space. For ‘\openin’, if TeX cannot find the file then it does not give an error. It just considers that the stream is not open (test for this with ‘\ifeof’; one recourse is the command ‘\InputIfFileExists’, *note Class and package commands::). If you try to use the same number twice, LaTeX won’t give you an error. If you try to use a bad number then you get an error message like ‘! Bad number (16). = l.30 \openin16=test.jh’. 27.2 ‘\read’ ============ Synopsis: \read NUMBER toMACRO Make the command MACRO contain the next line of input from text stream NUMBER, as in ‘\read5 to\data’. This opens the file ‘email.tex’ for reading, puts the contents of the first line into the command ‘\email’, and then closes the file. \newread\recipientfile \openin\recipientfile=email \read\recipientfile to\email \typeout{Email address: \email} \closein\recipientfile If NUMBER is outside the range from 0 to 15 or if no file of that number is open, or if the file has ended, then ‘\read’ will take input from the terminal (or exit if interaction is not allowed, e.g., ‘\nonstopmode’; *note interaction modes::). (However, the natural way in LaTeX to take input from the terminal is ‘\typein’ (*note \typein::.) To read an entire file as additional LaTeX source, use ‘\input’ (*note \input::) or ‘\include’ (*note \include & \includeonly::). A common reason to want to read from a data file is to do mail merges. CTAN has a number of packages for that; one is ‘datatool’. 27.3 ‘\typein’ ============== Synopsis, one of: \typein{PROMPT-MSG} \typein[CMD]{PROMPT-MSG} Print PROMPT-MSG on the terminal and cause LaTeX to stop and wait for you to type a line of input. This line of input ends when you hit the return key. For example, this As long as I live I shall never forget \typein{Enter student name:} coupled with this command line interaction Enter student name: \@typein=Aphra Behn gives the output ‘... never forget Aphra Behn’. The first command version, ‘\typein{PROMPT-MSG}’, causes the input you typed to be processed as if it had been included in the input file in place of the ‘\typein’ command. In the second command version the optional argument ‘CMD’ argument must be a command name, that is, it must begin with a backslash, \. This command name is then defined or redefined to be the input that you typed. For example, this \typein[\student]{Enter student name:} \typeout{Recommendation for \student .} gives this output on the command line, Enter student name: \student=John Dee Recommendation for John Dee. where the user has entered ‘John Dee.’ 27.4 ‘\typeout’ =============== Synopsis: \typeout{MSG} Print ‘msg’ on the terminal and in the ‘log’ file. This \newcommand{\student}{John Dee} \typeout{Recommendation for \student .} outputs ‘Recommendation for John Dee’. Like what happens here with ‘\student’, commands that are defined with ‘\newcommand’ or ‘\renewcommand’ (among others) are replaced by their definitions before being printed. LaTeX’s usual rules for treating multiple spaces as a single space and ignoring spaces after a command name apply to ‘msg’. Use the command ‘\space’ to get a single space, independent of surrounding spaces. Use ‘^^J’ to get a newline. Get a percent character with ‘\csname @percentchar\endcsname’. This command can be useful for simple debugging, as here: \newlength{\jhlength} \setlength{\jhlength}{5pt} \typeout{The length is \the\jhlength.} produces on the command line ‘The length is 5.0pt’. 27.5 ‘\write’ ============= Synopsis: \write NUMBER{STRING} Write STRING to the log file, to the terminal, or to a file opened by ‘\openout’. For instance, ‘\write6’ writes to text stream number 6. If the following appears in ‘BASEFILE.tex’ then it opens ‘BASEFILE.jh’, writes ‘Hello World!’ and a newline to it, and closes that file. \newwrite\myfile \immediate\openout\myfile=\jobname.jh % \jobname is root file basename ... \immediate\write\myfile{Hello world!} ... \immediate\closeout\myfile The ‘\newwrite’ allocates a stream number, giving it a symbolic name to make life easier, so that ‘stream \newwrite\myfile\the\myfile’ produces something like ‘stream 3’. Then ‘\openout’ associates the stream number with the given file name. TeX ultimately executed ‘\write3’ which puts the string in the file. Typically NUMBER is between 0 and 15, because typically LaTeX authors follow the prior example and the number is allocated by the system. If NUMBER is outside the range from 0 to 15 or if it is not associated with an open file then LaTeX writes STRING to the log file. If NUMBER is positive then in addition LaTeX writes STRING to the terminal. Thus, ‘test \write-1{Hello World!}’ puts ‘Hello World!’ followed by a newline in the log file. (This is what the ‘\wlog’ command does; *note \wlog::). And ‘\write100{Hello World!}’ puts the same in the log file but also puts ‘Hello World!’ followed by a newline in the terminal output. (But 16, 17, and 18 are special as NUMBER; see below.) In LuaTeX, instead of 16 output streams there are 256 (*note TeX engines::). Use ‘\write\@auxout{STRING}’ to write to the current ‘.aux’ file, which is associated with either the root file or with the current include file; and use ‘\write\@mainaux{STRING}’ to write to the main ‘.aux’. These symbolic names are defined by LaTeX. By default LaTeX does not write STRING to the file right away. This is because, for example, you may need ‘\write’ to save the current page number, but when TeX comes across a ‘\write’ it typically does not know what the page number is, since it has not yet done the page breaking. So, you use ‘\write’ in one of three contexts: \immediate\write\@auxout{STRING} %1 \write\@auxout{STRING} %2 \protected@write\@auxout{}{STRING} %3 1. With the first, LaTeX writes STRING to the file immediately. Any macros in STRING are fully expanded (just as in ‘\edef’) so to prevent expansion you must use ‘\noexpand’, ‘toks’, etc., except that you should use ‘#’ instead of ‘##’). 2. With the second, STRING is stored on the current list of things (as a TeX “whatsit” item) and kept until the page is shipped out and likewise the macros are unexpanded until ‘\shipout’. At ‘\shipout’, STRING is fully expanded. 3. The third, ‘\protected@write’, is like the second except that you can use ‘\protect’ to avoid expansion. The extra first argument allows you to locally insert extra definitions to make more macros protected or to have some other special definition for the write. As a simple example of expansion with ‘\write’, STRING here contains a control sequence ‘\triplex’ which we’ve defined to be the text ‘XYZ’: \newwrite\jhfile \openout\jhfile=test.jh \newcommand{\triplex}{XYZ} \write\jhfile{test \triplex test} This results in the file ‘test.jh’ containing the text ‘test XYZtest’ followed by a newline. The cases where NUMBER is 16, 17, or 18 are special. Because of ‘\write’’s behavior when NUMBER is outside the range from 0 to 15 described above, in Plain TeX ‘\write16’ and ‘\write17’ were sometimes used to write to the log file and the terminal; however, in LaTeX, the natural way to do that is with ‘\typeout’ (*note \typeout::). The ‘\write18’ command is even more special; modern TeX systems use it for giving commands to the operating system (*note \write18::). Ordinarily ‘\write’ outputs a single line. You can include a newline with ‘^^J’. Thus, this produces two lines in the log file: \wlog{Parallel lines have a lot in common.^^JBut they never meet.} A common case where authors need to write their own file is for answers to exercises, or another situation where you want to write out verbatim, without expanding the macros. CTAN has a number of packages for this; one is ‘answers’. 27.5.1 ‘\write’ and security ---------------------------- The ability to write files raises security issues. If you compiled a downloaded LaTeX file and it overwrote your password file then you would be justifiably troubled. Thus, by default TeX systems only allow you to open files for writing that are in the current directory or output directory, if specified (*note output directory::), or in a subdirectory of those. So, this code \newwrite\jhfile \openout\jhfile=../test.jh gives an error like: Not writing to ../test.jh (openout_any = p). ! I can't write on file `../test.jh' You can get just such an error when using commands such as ‘\include{../filename}’ because LaTeX will try to open ‘../filename.aux’. The simplest solution is to put the included files in the same directory as the root file, or in subdirectories. 27.5.2 ‘\message’ ----------------- Synopsis: \message{STRING} Write STRING to the log file and the terminal. Typically, LaTeX authors use ‘\typeout’ (*note \typeout::). It allows you to use ‘\protect’ on any fragile commands in STRING (*note \protect::). But ‘\typeout’ always inserts a newline at the end of STRING while ‘\message’ does not, so the latter can be useful. With this example document body. before\message{One Two}\message{Three}\message{Four^^JI} \message{declare a thumb war.}After under some circumstances (see below) LaTeX writes the following to both the terminal and the log file. One Two Three Four I declare a thumb war. The ‘^^J’ produces a newline. Also, in the output document, between ‘before’ and ‘After’ will be a single space (from the end of line following ‘I}’). While ‘\message’ allows you more control over formatting, a gotcha is that LaTeX may mess up that formatting because it inserts line breaks depending on what it has already written. Contrast this document body, where the ‘Two’ has moved, to the one given above. before\message{One}\message{Two Three}\message{Four^^JI} \message{declare a thumb war.}After This can happen: when LaTeX is outputting the messages to the terminal, now the message with ‘One’ is shorter and it fits at the end of the output terminal line, and so LaTeX breaks the line between it and the ‘Two Three’. That line break appears also in the log file. This line break insertion can depend on, for instance, the length of the full path names of included files. So producing finely-formatted lines in a way that is portable is hard, likely requiring starting your message at the beginning of a line. 27.5.3 ‘\wlog’ -------------- Synopsis: \wlog{STRING} Write STRING to the log file. \wlog{Did you hear about the mathematician who hates negatives?} \wlog{He'll stop at nothing to avoid them.} Ordinarily STRING appears in a single separate line. Use ‘^^J’ to insert a newline. \wlog{Helvetica and Times Roman walk into a bar.} \wlog{The barman says,^^JWe don't serve your type.} 27.5.4 ‘\write18’ ----------------- Synopsis: \write18{SHELL_COMMAND} Issue a command to the operating system shell. The operating system runs the command and LaTeX’s execution is blocked until that finishes. This sequence (on Unix) \usepackage{graphicx} % in preamble ... \newcommand{\fignum}{1} \immediate\write18{cd pix && asy figure\fignum} \includegraphics{pix/figure\fignum.pdf} will run Asymptote (the ‘asy’ program) on ‘pix/figure1.asy’, so that the document can later read in the resulting graphic (*note \includegraphics::). Like any ‘\write’, here LaTeX expands macros in SHELL_COMMAND so that ‘\fignum’ is replaced by ‘1’. Another example is that you can automatically run BibTeX at the start of each LaTeX run (*note Using BibTeX::) by including ‘\immediate\write18{bibtex8 \jobname}’ as the first line of the file. Note that ‘\jobname’ expands to the basename of the root file unless the ‘--jobname’ option is passed on the command line, in which case this is the option argument. You sometimes need to do a multi-step process to get the information that you want. This will insert into the input a list of all PDF files in the current directory (but see ‘texosquery’ below): \immediate\write18{ls *.pdf > tmp.dat} \input{tmp.dat} The standard behavior of any ‘\write’ is to wait until a page is being shipped out before expanding the macros or writing to the stream (*note \write::). But sometimes you want it done now. For this, use ‘\immediate\write18{SHELL_COMMAND}’. There are obvious security issues with allowing system commands inside a LaTeX file. If you download a file off the net and it contains commands to delete all your files then you would be unhappy. The standard settings in modern distributions turn off full shell access. You can turn it on, if you are sure the shell commands are safe, by compiling with ‘latex --enable-write18 FILENAME’ (*note Command line options::). (The ‘--shell-escape’ option is a synonym, in TeX Live.) In the place of full shell access, modern distributions by default use a restricted version that allows some commands to work, such as those that run Metafont to generate missing fonts, even if you do not use the ‘enable-write18’ option. By default this list of allowed commands is short and features only commands that are under the control of the distribution maintainers (*note Command line options::). The SHELL_COMMAND text is always passed to ‘/bin/sh’ on Unix-like operating systems, and the DOS command interpreter ‘cmd.exe’ on Windows. Any different shell set by the user, and the ‘SHELL’ environment variable, is ignored. If what you need is system information, such as the operating system name, locale information, or directory contents, take a look at the ‘texosquery’ package, which provides a convenient and secure interface for this, unlike the above examples using the raw ‘\write18’: . LaTeX provides a package ‘shellesc’ on top of the primitive ‘\write18’ command. Its primary purpose is to provide a command ‘\ShellEscape’ which works identically on all TeX engines; LuaTeX intentionally did not retain ‘\write18’ as a way to invoke a shell command, so some engine-specific code is needed. The ‘shellesc’ package also provides a command ‘\DelayedShellEscape’, executed at ‘\output’ time, for the same reason. 28 Command line interface ************************* Synopsis (from a terminal command line): pdflatex OPTIONS ARGUMENT Run LaTeX on ARGUMENT. In place of ‘pdflatex’ you can also use (for PDF output) ‘xelatex’ or ‘lualatex’, or (for DVI output) ‘latex’ or ‘dvilualatex’, among others (*note TeX engines::). For example, this will run LaTeX on the file ‘thesis.tex’, creating the output ‘thesis.pdf’. pdflatex thesis Note that ‘.tex’ is the default file name extension. pdfTeX is an extension of the original TeX program, as are XeTeX and LuaTeX (*note TeX engines::). The first two are completely backward compatible and the latter, almost so. Perhaps the most fundamental new feature for all three is that the original TeX output its own DVI format, while the newer ones can output directly to PDF. This allows them to take advantage of the extra features in PDF such as hyperlinks, support for modern image formats such as JPG and PNG, and ubiquitous viewing programs. In short, if you run ‘pdflatex’ or ‘xelatex’ or ‘lualatex’ then you will by default get PDF and have access to all its modern features. If you run ‘latex’, or ‘dvilualatex’, then you will get DVI. The description here assumes ‘pdflatex’. *Note Command line options::, for a selection of the most useful command line options. As to ARGUMENT, the usual case is that it does not begin with a backslash, so the system takes it to be the name of a file and it compiles that file. If ARGUMENT begins with a backslash then the system will interpret it as a line of LaTeX input, which can be used for special effects (*note Command line input::). If you gave no arguments or options then ‘pdflatex’ prompts for input from the terminal. You can escape from this by entering ‘CTRL-D’. If LaTeX finds an error in your document then by default it stops and asks you about it. *Note Recovering from errors::, for an outline of what to do. 28.1 Command line options ========================= These are the command-line options relevant to ordinary document authoring. For a full list, try running ‘latex --help’ from the command line. With many implementations you can specify command line options by prefixing them with ‘-’ or ‘--’. This is the case for both TeX Live (including MacTeX) and MiKTeX. We will use both conventions interchangeably. If an option takes a value, it can be specified either as a separate argument (‘--foo val’), or as one argument with an ‘=’ sign (‘--foo=val’), but there can be no spaces around the ‘=’. We will generally use the ‘=’ syntax. ‘-version’ Show the current version, like ‘pdfTeX 3.14159265-2.6-1.40.16 (TeX Live 2015/Debian)’ along with a small amount of additional information, and exit. ‘-help’ Give a brief usage message that is useful as a prompt and exit. ‘-interaction=MODE’ TeX compiles a document in one of four interaction modes: ‘batchmode’, ‘nonstopmode’, ‘scrollmode’, ‘errorstopmode’. In “errorstopmode” (the default), TeX stops at each error and asks for user intervention. In “batchmode” it prints nothing on the terminal, errors are scrolled as if the user hit ‘RETURN’ at every error, and missing files cause the job to abort. In “nonstopmode”, diagnostic message appear on the terminal but as in batch mode there is no user interaction. In “scrollmode”, TeX stops for missing files or keyboard input, but nothing else. For instance, starting LaTeX with this command line pdflatex -interaction=batchmode FILENAME eliminates most terminal output. ‘-jobname=STRING’ Set the value of TeX’s “jobname” to the string. The log file and output file will then be named ‘STRING.log’ and ‘STRING.pdf’. *note Jobname::. ‘-output-directory=DIRECTORY’ Write files in the directory DIRECTORY. It must already exist. This applies to all external files created by TeX or LaTeX, such as the ‘.log’ file for the run, the ‘.aux’, ‘.toc’, etc., files created by LaTeX, as well as the main ‘.pdf’ or ‘.dvi’ output file itself. When specified, the output directory DIRECTORY is also automatically checked first for any file that it is input, so that the external files can be read back in, if desired. The true current directory (in which LaTeX was run) remains unchanged, and is also checked for input files. ‘--enable-write18’ ‘--disable-write18’ ‘--shell-escape’ ‘--no-shell-escape’ Enable or disable ‘\write18{SHELL_COMMAND}’ (*note \write18::). The first two options are supported by both TeX Live and MiKTeX, while the second two are synonyms supported by TeX Live. Enabling this functionality has major security implications, since it allows a LaTeX file to run any command whatsoever. Thus, by default, unrestricted ‘\write18’ is not allowed. (The default for TeX Live, MacTeX, and MiKTeX is to allow the execution of a limited number of TeX-related programs, which they distribute.) For example, if you invoke LaTeX with the option ‘no-shell-escape’, and in your document you call ‘\write18{ls -l}’, then you do not get an error but the log file says ‘runsystem(ls -l)...disabled’. ‘-halt-on-error’ Stop processing at the first error. ‘-file-line-error’ ‘-no-file-line-error’ Enable or disable ‘FILENAME:LINENO:ERROR’-style error messages. These are only available with TeX Live or MacTeX. 28.2 Command line input ======================= As part of the command line invocation LATEX-ENGINE OPTIONS ARGUMENT you can specify arbitrary LaTeX input by starting ARGUMENT with a backslash. (All the engines support this.) This allows you to do some special effects. For example, this file (which uses the ‘hyperref’ package for hyperlinks) can produce two kinds of output, one to be read on physical paper and one to be read online. \ifdefined\paperversion % in preamble \newcommand{\urlcolor}{black} \else \newcommand{\urlcolor}{blue} \fi \usepackage[colorlinks=true,urlcolor=\urlcolor]{hyperref} ... \href{https://www.ctan.org}{CTAN} % in body ... Compiling this document ‘book.tex’ with the command line ‘pdflatex book’ will give the ‘CTAN’ link in blue. But compiling it with pdflatex "\def\paperversion{}\input book.tex" has the link in black. We use double quotes to prevent interpretation of the symbols by the command line shell. (This usually works on both Unix and Windows systems, but there are many peculiarities to shell quoting, so read your system documentation if need be.) In a similar way, from the single file ‘main.tex’ you can compile two different versions. pdflatex -jobname=students "\def\student{}\input{main}" pdflatex -jobname=teachers "\def\teachers{}\input{main}" The ‘jobname’ option is there because otherwise both files would be called ‘main.pdf’ and the second would overwrite the first. (*note Jobname::.) In this example we use the command line to select which parts of a document to include. For a book named ‘mybook.tex’ and structured like this. \documentclass{book} \begin{document} ... \include{chap1} \include{chap2} ... \end{document} the command line pdflatex "\includeonly{chap1}\input{mybook}" will give output that has the first chapter but no other chapter. *Note Splitting the input::. 28.3 Jobname ============ Running LaTeX creates a number of files, including the main PDF (or DVI) output but also including others. These files are named with the so-called “jobname”. The most common case is also the simplest, where for instance the command ‘pdflatex thesis’ creates ‘thesis.pdf’ and also ‘thesis.log’ and ‘thesis.aux’. Here the job name is ‘thesis’. In general, LaTeX is invoked as ‘LATEX-ENGINE OPTIONS ARGUMENT’, where LATEX-ENGINE is ‘pdflatex’, ‘lualatex’, etc. (*note TeX engines::). If ARGUMENT does not start with a backslash, as is the case above with ‘thesis’, then TeX considers it to be the name of the file to input as the main document. This file is referred to as the “root file” (*note Splitting the input::, and *note \input::). The name of that root file, without the ‘.tex’ extension if any, is the jobname. If ARGUMENT does start with a backslash, or if TeX is in interactive mode, then it waits for the first ‘\input’ command, and the jobname is the argument to ‘\input’. There are two more possibilities for the jobname. It can be directly specified with the ‘-jobname’ option, as in ‘pdflatex -jobname=myname’ (*note Command line input:: for a real example). The final possibility is ‘texput’, which is the final fallback default if no other name is available to TeX. That is, if no ‘-jobname’ option was specified, and the compilation stops before any input file is met, then the log file will be named ‘texput.log’. A special case of this is that in LaTeX versions of (approximately) 2020 or later, the jobname is also ‘texput’ if the first ‘\input’ occurs as a result of being called by either ‘\documentclass’ or ‘\RequirePackage’. So this will produce a file named ‘texput.pdf’: pdflatex "\documentclass{minimal}\begin{document}Hello!\end{document}" However, this special case only applies to those two commands. Thus, with pdflatex "\documentclass{article}\usepackage{lipsum}\input{thesis}" the output file is ‘lipsum.pdf’, as ‘\usepackage’ calls ‘\input’. Within the document, the macro ‘\jobname’ expands to the jobname. (When you run LaTeX on a file whose name contains spaces, the string returned by ‘\jobname’ contains matching start and end quotes.) In the expansion of that macro, all characters are of catcode 12 (other) except that spaces are category 10, including letters that are normally catcode 11. Because of this catcode situation, using the jobname in a conditional can become complicated. One solution is to use the macro ‘\IfBeginWith’ from the ‘xstring’ package in its star variant, which is insensitive to catcode. For example, in the following text the footnote “Including Respublica Bananensis Francorum.” is only present if the task name starts with ‘my-doc’. If a democracy is just a regime where citizens vote then all banana republics \IfBeginWith*{\jobname}{my-doc}% {\footnote{Including Respublica Bananensis Francorum.}}{} are democracies. Manipulating the value of ‘\jobname’ inside of a document does not change the name of the output file or the log file. 28.4 Recovering from errors =========================== If LaTeX finds an error in your document then it gives you an error message and prompts you with a question mark, ‘?’. For instance, running LaTeX on this file \newcommand{\NP}{\ensuremath{\textbf{NP}}} The \PN{} problem is a million dollar one. causes it show this, and wait for input. ! Undefined control sequence. l.5 The \PN {} problem is a million dollar one. ? The simplest thing is to enter ‘x’ and ‘RETURN’ and fix the typo. You could instead enter ‘?’ and ‘RETURN’ to see other options. There are two other error scenarios. The first is that you forgot to include the ‘\end{document}’ or misspelled it. In this case LaTeX gives you a ‘*’ prompt. You can get back to the command line by typing ‘\stop’ and ‘RETURN’; this command does its best to exit LaTeX immediately, whatever state it may be in. The last scenario is that you mistyped the filename. For instance, instead of ‘pdflatex test’ you might type ‘pdflatex tste’. ! I can't find file `tste'. <*> tste (Press Enter to retry, or Control-D to exit) Please type another input file name: The simplest thing is to enter ‘CTRL d’ (holding the Control and d keys down at the same time), and then retype the correct command line. Appendix A Document templates ***************************** Although illustrative material, perhaps these document templates will be useful. Additional template resources are listed at . A.1 ‘beamer’ template ===================== The ‘beamer’ class creates presentation slides. It has a vast array of features, but here is a basic template: \documentclass{beamer} \title{Beamer Class template} \author{Alex Author} \date{July 31, 2020} \begin{document} \maketitle % without [fragile], any {verbatim} code gets mysterious errors. \begin{frame}[fragile] \frametitle{First Slide} \begin{verbatim} This is \verbatim! \end{verbatim} \end{frame} \end{document} The Beamer package on CTAN: . A.2 ‘article’ template ====================== A simple template for an article. \documentclass{article} \title{Article Class Template} \author{Alex Author} \begin{document} \maketitle \section{First section} Some text. \subsection{First section, first subsection} Additional text. \section{Second section} Some more text. \end{document} A.3 ‘book’ template =================== This is a straightforward template for a book. *Note Larger book template::, for a more elaborate one. \documentclass{book} \title{Book Class Template} \author{Alex Author} \begin{document} \maketitle \chapter{First} Some text. \chapter{Second} Some other text. \section{A subtopic} The end. \end{document} A.4 Larger ‘book’ template ========================== This is a somewhat elaborate template for a book. *Note book template::, for a simpler one. This template uses ‘\frontmatter’, ‘\mainmatter’, and ‘\backmatter’ to control the typography of the three main areas of a book (*note \frontmatter & \mainmatter & \backmatter::). The book has a bibliography and an index. Also notable is that it uses ‘\include’ and ‘\includeonly’ (*note Splitting the input::). While you are working on a chapter you can comment out all the other chapter entries from the argument to ‘\includeonly’. That will speed up compilation without losing any information such as cross-references. (Material that does not need to come on a new page is brought in with ‘\input’ instead of ‘\include’. You don’t get the cross-reference benefit with ‘\input’.) \documentclass[titlepage]{book} \usepackage{makeidx}\makeindex \title{Book Class Template} \author{Alex Author} \includeonly{% % frontcover, preface, chap1, % appenA, } \begin{document} \frontmatter \include{frontcover} % maybe comment out while drafting: \maketitle \input{dedication} \input{copyright} \tableofcontents \include{preface} \mainmatter \include{chap1} ... \appendix \include{appenA} ... \backmatter \bibliographystyle{apalike} \addcontentsline{toc}{chapter}{Bibliography} \bibliography \addcontentsline{toc}{chapter}{Index} \printindex \include{backcover} \end{document} Index ***** * Menu: * $ inline math: math. (line 4760) * $$...$$ plain TeX display math: displaymath. (line 3866) * & (for table cells): tabular. (line 5732) * * prompt: Recovering from errors. (line 16383) * *, to \nocite all keys: Using BibTeX. (line 6263) * *-form of environment commands: \newenvironment & \renewenvironment. (line 7672) * *-form of sectioning commands: Sectioning. (line 2661) * *-form, defining new commands: \newcommand & \renewcommand. (line 7256) * --disable-write18 command-line option: Command line options. (line 16208) * --enable-write18 command-line option: Command line options. (line 16208) * --file-line-error command-line option: Command line options. (line 16229) * --halt-on-error command-line option: Command line options. (line 16226) * --help command-line option: Command line options. (line 16170) * --interaction command-line option: Command line options. (line 16173) * --jobname command-line option: Command line options. (line 16190) * --no-file-line-error command-line option: Command line options. (line 16229) * --no-shell-escape command-line option: Command line options. (line 16208) * --output-directory command-line option: Command line options. (line 16195) * --shell-escape command-line option: Command line options. (line 16208) * --version command-line option: Command line options. (line 16165) * -1, write stream number: \write. (line 15868) * .aux file: Output files. (line 492) * .aux file and BibTeX commands: BibTeX error messages. (line 6270) * .dvi file: Output files. (line 469) * .fmt file: TeX engines. (line 511) * .glo file: Glossaries. (line 15267) * .idx file: Indexes. (line 14857) * .idx file <1>: makeindex. (line 15056) * .ind file: makeindex. (line 15056) * .isty file: makeindex. (line 15068) * .lof file: Output files. (line 502) * .lof file <1>: Table of contents etc.. (line 14465) * .lof file <2>: \contentsline. (line 14760) * .log file: Output files. (line 487) * .lot file: Output files. (line 502) * .lot file <1>: Table of contents etc.. (line 14465) * .lot file <2>: \contentsline. (line 14760) * .pdf file: Output files. (line 479) * .tex, default extension: Command line interface. (line 16122) * .toc file: Output files. (line 502) * .toc file <1>: Table of contents etc.. (line 14465) * .toc file <2>: \contentsline. (line 14760) * .xdv file: TeX engines. (line 547) * /bin/sh, used by \write18: \write18. (line 16087) * 10pt option: Document class options. (line 741) * 11pt option: Document class options. (line 741) * 12pt option: Document class options. (line 741) * : (for math): Colon character & \colon. (line 11004) * [...] (for optional arguments): LaTeX command syntax. (line 597) * \ (backslash-space): \(SPACE). (line 11687) * \ character starting commands: LaTeX command syntax. (line 597) * \!: Spacing in math mode. (line 10765) * \" (umlaut accent): Accents. (line 13939) * \#: Reserved characters. (line 13612) * \$: Reserved characters. (line 13612) * \%: Reserved characters. (line 13612) * \&: Reserved characters. (line 13612) * \' (acute accent): Accents. (line 13943) * \' (tabbing): tabbing. (line 5580) * \(...\) inline math: math. (line 4760) * \*: \*. (line 11024) * \+: tabbing. (line 5572) * \,: Spacing in math mode. (line 10751) * \-: tabbing. (line 5576) * \- (hyphenation): \- (hyphenation). (line 6639) * \. (dot-over accent): Accents. (line 13946) * \/: \/. (line 11835) * \:: Spacing in math mode. (line 10740) * \;: Spacing in math mode. (line 10727) * \<: tabbing. (line 5568) * \= (macron accent): Accents. (line 13950) * \= (tabbing): tabbing. (line 5562) * \>: tabbing. (line 5566) * \> <1>: Spacing in math mode. (line 10740) * \> (tabbing): tabbing. (line 5565) * \@: \@. (line 11610) * \@auxout: \write. (line 15883) * \@beginparpenalty: list. (line 4642) * \@dottedtocline: \@dottedtocline. (line 14588) * \@endparpenalty: list. (line 4650) * \@fnsymbol: \footnote. (line 7004) * \@ifstar: \@ifstar. (line 7486) * \@itempenalty: list. (line 4646) * \@mainaux: \write. (line 15883) * \@startsection: \@startsection. (line 3147) * \a (tabbing): tabbing. (line 5595) * \a' (acute accent in tabbing): tabbing. (line 5596) * \a= (macron accent in tabbing): tabbing. (line 5596) * \aa (å): Additional Latin letters. (line 14063) * \AA (Å): Additional Latin letters. (line 14063) * \accent: \accent. (line 14012) * \acute: Math accents. (line 10621) * \addcontentsline: \addcontentsline. (line 14623) * \address: \address. (line 15445) * \addtocontents{EXT}{TEXT}: \addtocontents. (line 14702) * \addtocounter: \addtocounter. (line 8268) * \addtolength: \addtolength. (line 8526) * \addvspace: \addvspace. (line 12170) * \ae (æ): Additional Latin letters. (line 14067) * \AE (Æ): Additional Latin letters. (line 14067) * \aleph: Math symbols. (line 9156) * \Alph example: enumerate. (line 3977) * \alpha: Math symbols. (line 9159) * \alph{COUNTER}: \alph \Alph \arabic \roman \Roman \fnsymbol. (line 8143) * \Alph{COUNTER}: \alph \Alph \arabic \roman \Roman \fnsymbol. (line 8148) * \alsoname: \index. (line 14991) * \amalg: Math symbols. (line 9162) * \and (for \author): \maketitle. (line 11206) * \angle: Math symbols. (line 9165) * \appendix: \appendix. (line 3077) * \approx: Math symbols. (line 9169) * \arabic{COUNTER}: \alph \Alph \arabic \roman \Roman \fnsymbol. (line 8153) * \arccos: Math functions. (line 10504) * \arcsin: Math functions. (line 10507) * \arctan: Math functions. (line 10510) * \arg: Math functions. (line 10513) * \arraycolsep: array. (line 3663) * \arrayrulewidth: tabular. (line 5857) * \arraystretch: tabular. (line 5863) * \ast: Math symbols. (line 9172) * \asymp: Math symbols. (line 9179) * \AtBeginDocument: \AtBeginDocument. (line 3890) * \AtBeginDvi: Class and package commands. (line 921) * \AtEndDocument: \AtEndDocument. (line 3906) * \AtEndOfClass: Class and package commands. (line 926) * \AtEndOfPackage: Class and package commands. (line 926) * \author{NAME1 \and NAME2 \and ...}: \maketitle. (line 11205) * \a` (grave accent in tabbing): tabbing. (line 5596) * \b (bar-under accent): Accents. (line 13965) * \backmatter: \frontmatter & \mainmatter & \backmatter. (line 3111) * \backslash: Math symbols. (line 9182) * \bar: Math accents. (line 10624) * \baselineskip: Low-level font commands. (line 1994) * \baselineskip <1>: \baselineskip & \baselinestretch. (line 2318) * \baselinestretch: \baselineskip & \baselinestretch. (line 2318) * \begin: Environments. (line 3555) * \beta: Math symbols. (line 9186) * \bf: Font styles. (line 1772) * \bfseries: Font styles. (line 1737) * \bibdata: BibTeX error messages. (line 6280) * \bibitem: \bibitem. (line 6085) * \bibliography: Using BibTeX. (line 6208) * \bibliography and internal \bibdata: BibTeX error messages. (line 6281) * \bibliographystyle: Using BibTeX. (line 6208) * \bibliographystyle and internal \bibstyle: BibTeX error messages. (line 6284) * \bibname: thebibliography. (line 6068) * \bibstyle: BibTeX error messages. (line 6283) * \bigbreak: \bigbreak & \medbreak & \smallbreak. (line 11978) * \bigcap: Math symbols. (line 9189) * \bigcirc: Math symbols. (line 9193) * \bigcup: Math symbols. (line 9196) * \bigl: \bigl & \bigr etc.. (line 10301) * \bigodot: Math symbols. (line 9200) * \bigoplus: Math symbols. (line 9203) * \bigotimes: Math symbols. (line 9206) * \bigr: \bigl & \bigr etc.. (line 10301) * \bigskip: \bigskip & \medskip & \smallskip. (line 11929) * \bigskip <1>: \bigskip & \medskip & \smallskip. (line 11951) * \bigskipamount: \bigskip & \medskip & \smallskip. (line 11952) * \bigsqcup: Math symbols. (line 9217) * \bigtriangledown: Math symbols. (line 9209) * \bigtriangleup: Math symbols. (line 9213) * \biguplus: Math symbols. (line 9220) * \bigvee: Math symbols. (line 9224) * \bigwedge: Math symbols. (line 9227) * \bmod: Math functions. (line 10516) * \boldmath: \boldmath & \unboldmath. (line 10028) * \boldmath <1>: \boldmath & \unboldmath. (line 10036) * \bot: Math symbols. (line 9230) * \bottomfraction: Floats. (line 2500) * \bottomfraction <1>: Floats. (line 2501) * \bowtie: Math symbols. (line 9234) * \Box: Math symbols. (line 9237) * \breve: Math accents. (line 10627) * \bullet: Math symbols. (line 9242) * \c (cedilla accent): Accents. (line 13975) * \cal: Font styles. (line 1775) * \cap: Math symbols. (line 9245) * \capitalacute: Accents. (line 13943) * \capitalbreve: Accents. (line 14003) * \capitalcaron: Accents. (line 14007) * \capitalcedilla: Accents. (line 13975) * \capitalcircumflex: Accents. (line 13954) * \capitaldieresis: Accents. (line 13939) * \capitaldotaccent: Accents. (line 13979) * \capitalgrave: Accents. (line 13958) * \capitalhungarumlaut: Accents. (line 13983) * \capitalmacron: Accents. (line 13950) * \capitalnewtie: Accents. (line 13997) * \capitalogonek: Accents. (line 13987) * \capitalring: Accents. (line 13991) * \capitaltie: Accents. (line 13997) * \capitaltilde: Accents. (line 13962) * \caption: \caption. (line 2562) * \caption <1>: figure. (line 4100) * \caption <2>: table. (line 5684) * \cc: \cc. (line 15470) * \cdot: Math symbols. (line 9249) * \cdots: Dots. (line 10398) * \centering: \centering. (line 3742) * \chapter: Sectioning. (line 2636) * \chapter <1>: \chapter. (line 2777) * \check: Math accents. (line 10630) * \CheckCommand: Class and package commands. (line 933) * \CheckCommand*: Class and package commands. (line 933) * \chi: Math symbols. (line 9252) * \circ: Math symbols. (line 9255) * \circle: \circle. (line 5229) * \citation: BibTeX error messages. (line 6286) * \cite: \cite. (line 6143) * \cite and internal \citation: BibTeX error messages. (line 6287) * \ClassError: Class and package commands. (line 953) * \ClassInfo: Class and package commands. (line 953) * \ClassInfoNoLine: Class and package commands. (line 953) * \ClassWarning: Class and package commands. (line 953) * \ClassWarningNoLine: Class and package commands. (line 953) * \cleardoublepage: \clearpage & \cleardoublepage. (line 6820) * \clearpage: \clearpage & \cleardoublepage. (line 6820) * \cline: \cline. (line 5991) * \closein: \openin & \openout. (line 15671) * \closeout: \openin & \openout. (line 15671) * \closing: \closing. (line 15486) * \clubsuit: Math symbols. (line 9259) * \colon: Colon character & \colon. (line 11004) * \columnsep: \twocolumn. (line 2059) * \columnsep <1>: Page layout parameters. (line 2185) * \columnsep <2>: Page layout parameters. (line 2188) * \columnseprule: \twocolumn. (line 2065) * \columnseprule <1>: Page layout parameters. (line 2186) * \columnseprule <2>: Page layout parameters. (line 2188) * \columnwidth: \twocolumn. (line 2072) * \columnwidth <1>: Page layout parameters. (line 2187) * \columnwidth <2>: Page layout parameters. (line 2188) * \complement: Math symbols. (line 9262) * \cong: Math symbols. (line 9268) * \contentsline: Table of contents etc.. (line 14521) * \contentsline <1>: \addcontentsline. (line 14627) * \contentsline <2>: \contentsline. (line 14760) * \coprod: Math symbols. (line 9271) * \copyright: Text symbols. (line 13707) * \cos: Math functions. (line 10519) * \cosh: Math functions. (line 10522) * \cot: Math functions. (line 10525) * \coth: Math functions. (line 10528) * \csc: Math functions. (line 10531) * \cup: Math symbols. (line 9274) * \CurrentOption: Class and package commands. (line 972) * \d (dot-under accent): Accents. (line 13979) * \dag: Text symbols. (line 13711) * \dagger: Math symbols. (line 9278) * \dashbox: \dashbox. (line 5439) * \dashv: Math symbols. (line 9281) * \date{TEXT}: \maketitle. (line 11213) * \day: \day & \month & \year. (line 8317) * \dblfloatpagefraction: \twocolumn. (line 2105) * \dblfloatsep: \twocolumn. (line 2111) * \dbltextfloatsep: \twocolumn. (line 2118) * \dbltopfraction: \twocolumn. (line 2084) * \dbltopnumber: \twocolumn. (line 2123) * \ddag: Text symbols. (line 13714) * \ddagger: Math symbols. (line 9285) * \ddot: Math accents. (line 10633) * \ddots: Dots. (line 10402) * \DeclareFontEncoding: \DeclareFontEncoding. (line 1386) * \DeclareGraphicsExtensions: \DeclareGraphicsExtensions. (line 13034) * \DeclareGraphicsRule: \DeclareGraphicsRule. (line 13076) * \DeclareOption: Class and package commands. (line 978) * \DeclareOption*: Class and package commands. (line 978) * \DeclareRobustCommand: Class and package commands. (line 1008) * \DeclareRobustCommand*: Class and package commands. (line 1008) * \DeclareTextAccent: \DeclareTextAccent. (line 1420) * \DeclareTextAccent <1>: \DeclareTextAccentDefault. (line 1444) * \DeclareTextAccentDefault: \DeclareTextAccentDefault. (line 1444) * \DeclareTextCommand: \DeclareTextCommand & \ProvideTextCommand. (line 1472) * \DeclareTextCommandDefault: \DeclareTextCommandDefault & \ProvideTextCommandDefault. (line 1521) * \DeclareTextComposite: \DeclareTextComposite. (line 1553) * \DeclareTextCompositeCommand: \DeclareTextCompositeCommand. (line 1577) * \DeclareTextSymbol: \DeclareTextCommand & \ProvideTextCommand. (line 1503) * \DeclareTextSymbol <1>: \DeclareTextSymbol. (line 1595) * \DeclareTextSymbol <2>: \DeclareTextSymbolDefault. (line 1622) * \DeclareTextSymbolDefault: \DeclareTextSymbolDefault. (line 1622) * \deg: Math functions. (line 10534) * \DelayedShellEscape: \write18. (line 16098) * \Delta: Math symbols. (line 9288) * \delta: Math symbols. (line 9291) * \det: Math functions. (line 10537) * \dh (ð): Additional Latin letters. (line 14071) * \DH (Ð): Additional Latin letters. (line 14071) * \Diamond: Math symbols. (line 9294) * \diamond: Math symbols. (line 9298) * \diamondsuit: Math symbols. (line 9302) * \dim: Math functions. (line 10540) * \displaystyle: Math styles. (line 10953) * \div: Math symbols. (line 9305) * \dj: Additional Latin letters. (line 14077) * \DJ: Additional Latin letters. (line 14077) * \documentclass: Document classes. (line 698) * \documentclass, and texput jobname: Jobname. (line 16327) * \dot: Math accents. (line 10636) * \doteq: Math symbols. (line 9308) * \dotfill: \hrulefill & \dotfill. (line 11880) * \dots: Dots. (line 10407) * \dots <1>: Dots. (line 10430) * \dots <2>: Text symbols. (line 13732) * \dotsb: Dots. (line 10430) * \dotsc: Dots. (line 10430) * \dotsi: Dots. (line 10430) * \doublerulesep: tabular. (line 5868) * \downarrow: Math symbols. (line 9312) * \Downarrow: Math symbols. (line 9316) * \ell: Math symbols. (line 9320) * \emph: Font styles. (line 1757) * \emptyset: Math symbols. (line 9323) * \encl: \encl. (line 15499) * \end: Environments. (line 3555) * \endinput: \endinput. (line 14276) * \enlargethispage: \enlargethispage. (line 6895) * \enspace: \enspace & \quad & \qquad. (line 11419) * \enumi: enumerate. (line 3963) * \enumii: enumerate. (line 3963) * \enumiii: enumerate. (line 3963) * \enumiv: enumerate. (line 3963) * \epsilon: Math symbols. (line 9326) * \equiv: Math symbols. (line 9332) * \eta: Math symbols. (line 9335) * \evensidemargin: Document class options. (line 811) * \evensidemargin <1>: Page layout parameters. (line 2246) * \evensidemargin <2>: Page layout parameters. (line 2247) * \ExecuteOptions: Class and package commands. (line 1084) * \exists: Math symbols. (line 9338) * \exp: Math functions. (line 10543) * \externaldocument: xr package. (line 3501) * \extracolsep: tabular. (line 5808) * \fbox: \fbox & \framebox. (line 12316) * \fboxrule: \framebox (picture). (line 5416) * \fboxrule <1>: \fbox & \framebox. (line 12348) * \fboxrule <2>: \fbox & \framebox. (line 12347) * \fboxsep: \framebox (picture). (line 5416) * \fboxsep <1>: \fbox & \framebox. (line 12353) * \fboxsep <2>: \fbox & \framebox. (line 12352) * \fill: \hfill. (line 11505) * \flat: Math symbols. (line 9341) * \floatpagefraction: Floats. (line 2504) * \floatpagefraction <1>: Floats. (line 2505) * \floatsep: Floats. (line 2520) * \floatsep <1>: Floats. (line 2521) * \flushbottom: \flushbottom. (line 2152) * \fnsymbol, and footnotes: \footnote. (line 7004) * \fnsymbol{COUNTER}: \alph \Alph \arabic \roman \Roman \fnsymbol. (line 8166) * \fontdimen1: \/. (line 11869) * \fontencoding: Low-level font commands. (line 1904) * \fontfamily: Low-level font commands. (line 1914) * \fontseries: Low-level font commands. (line 1941) * \fontshape: Low-level font commands. (line 1981) * \fontsize: Low-level font commands. (line 1994) * \footnote: \footnote. (line 6986) * \footnotemark: \footnotemark. (line 7052) * \footnoterule: \footnote. (line 7014) * \footnotesep: \footnote. (line 7026) * \footnotesize: Font sizes. (line 1847) * \footnotetext: \footnotetext. (line 7108) * \footskip: Page layout parameters. (line 2205) * \footskip <1>: Page layout parameters. (line 2206) * \forall: Math symbols. (line 9344) * \frac: \frac. (line 11040) * \frame: \frame. (line 5427) * \framebox: \framebox (picture). (line 5391) * \framebox <1>: \fbox & \framebox. (line 12316) * \frenchspacing: \frenchspacing & \nonfrenchspacing. (line 11656) * \frontmatter: \frontmatter & \mainmatter & \backmatter. (line 3111) * \frown: Math symbols. (line 9347) * \fussy: \fussy & \sloppy. (line 6696) * \Gamma: Math symbols. (line 9350) * \gamma: Math symbols. (line 9353) * \gcd: Math functions. (line 10546) * \ge: Math symbols. (line 9356) * \geq: Math symbols. (line 9360) * \gets: Math symbols. (line 9364) * \gg: Math symbols. (line 9367) * \gls: \gls. (line 15337) * \graphicspath: \graphicspath. (line 12971) * \graphpaper: \graphpaper. (line 5132) * \grave: Math accents. (line 10639) * \guillemotleft («): Text symbols. (line 13723) * \guillemotright (»): Text symbols. (line 13724) * \guilsinglleft (‹): Text symbols. (line 13725) * \guilsinglright (›): Text symbols. (line 13726) * \H (Hungarian umlaut accent): Accents. (line 13983) * \hat: Math accents. (line 10642) * \hbar: Math symbols. (line 9370) * \headheight: Page layout parameters. (line 2193) * \headheight <1>: Page layout parameters. (line 2194) * \headsep: Page layout parameters. (line 2198) * \headsep <1>: Page layout parameters. (line 2199) * \heartsuit: Math symbols. (line 9373) * \hfill: \hfill. (line 11493) * \hline: \hline. (line 6013) * \hom: Math functions. (line 10549) * \hookleftarrow: Math symbols. (line 9376) * \hookrightarrow: Math symbols. (line 9379) * \hphantom: \phantom & \vphantom & \hphantom. (line 10845) * \hrulefill: \hrulefill & \dotfill. (line 11880) * \hsize: Page layout parameters. (line 2298) * \hsize <1>: Page layout parameters. (line 2299) * \hspace: \hspace. (line 11446) * \hss: \hss. (line 11526) * \huge: Font sizes. (line 1847) * \Huge: Font sizes. (line 1847) * \hyphenation: \hyphenation. (line 6738) * \i (dotless i): Accents. (line 13933) * \IfBeginWith* macro from xstring: Jobname. (line 16348) * \iff: Math symbols. (line 9382) * \IfFileExists: Class and package commands. (line 1040) * \ignorespaces: \ignorespaces & \ignorespacesafterend. (line 7981) * \ignorespacesafterend: \ignorespaces & \ignorespacesafterend. (line 7981) * \ij (ij): Additional Latin letters. (line 14083) * \IJ (IJ): Additional Latin letters. (line 14083) * \Im: Math symbols. (line 9386) * \imath: Math symbols. (line 9389) * \immediate\write: \write. (line 15898) * \in: Math symbols. (line 9393) * \include: \include & \includeonly. (line 14308) * \includegraphics: \includegraphics. (line 13155) * \includeonly: \include & \includeonly. (line 14308) * \indent: \indent & \noindent. (line 8881) * \index: Indexes. (line 14857) * \index <1>: \index. (line 14939) * \indexentry: \index. (line 15041) * \indexspace: Produce the index manually. (line 14928) * \indexspace <1>: makeindex. (line 15109) * \inf: Math functions. (line 10552) * \infty: Math symbols. (line 9397) * \input: \input. (line 14427) * \inputencoding: inputenc package. (line 14158) * \InputIfFileExists: Class and package commands. (line 1040) * \int: Math symbols. (line 9400) * \intextsep: Floats. (line 2524) * \intextsep <1>: Floats. (line 2525) * \iota: Math symbols. (line 9403) * \it: Font styles. (line 1778) * \item: description. (line 3809) * \item <1>: enumerate. (line 3945) * \item <2>: itemize. (line 4295) * \item <3>: itemize. (line 4319) * \item <4>: Produce the index manually. (line 14928) * \itemindent: list. (line 4466) * \itemsep: list. (line 4470) * \itshape: Font styles. (line 1731) * \j (dotless j): Accents. (line 13933) * \jmath: Math symbols. (line 9409) * \jobname: Jobname. (line 16301) * \jobname <1>: Jobname. (line 16341) * \Join: Math symbols. (line 9406) * \k (ogonek): Accents. (line 13987) * \kappa: Math symbols. (line 9413) * \ker: Math functions. (line 10555) * \kill: tabbing. (line 5600) * \l (ł): Additional Latin letters. (line 14087) * \L (Ł): Additional Latin letters. (line 14087) * \l@chapter: \contentsline. (line 14760) * \l@section: \contentsline. (line 14760) * \l@subsection: \contentsline. (line 14760) * \label: \label. (line 3390) * \labelenumi: enumerate. (line 3972) * \labelenumii: enumerate. (line 3972) * \labelenumiii: enumerate. (line 3972) * \labelenumiv: enumerate. (line 3972) * \labelitemi: itemize. (line 4331) * \labelitemii: itemize. (line 4331) * \labelitemiii: itemize. (line 4331) * \labelitemiv: itemize. (line 4331) * \labelsep: list. (line 4482) * \labelwidth: list. (line 4487) * \Lambda: Math symbols. (line 9416) * \lambda: Math symbols. (line 9419) * \land: Math symbols. (line 9422) * \langle: Math symbols. (line 9426) * \large: Font sizes. (line 1847) * \Large: Font sizes. (line 1847) * \LARGE: Font sizes. (line 1847) * \LastDeclaredEncoding: \LastDeclaredEncoding. (line 1648) * \LaTeX: Text symbols. (line 13717) * \LaTeXe: Text symbols. (line 13720) * \lbrace: Math symbols. (line 9430) * \lbrack: Math symbols. (line 9433) * \lceil: Math symbols. (line 9436) * \ldots: Dots. (line 10405) * \ldots <1>: Text symbols. (line 13730) * \le: Math symbols. (line 9440) * \leadsto: Math symbols. (line 9443) * \left: \left & \right. (line 10193) * \Leftarrow: Math symbols. (line 9449) * \leftarrow: Math symbols. (line 9453) * \lefteqn: eqnarray. (line 4027) * \leftharpoondown: Math symbols. (line 9457) * \leftharpoonup: Math symbols. (line 9460) * \leftmargin: itemize. (line 4347) * \leftmargin <1>: list. (line 4507) * \leftmargini: itemize. (line 4347) * \leftmarginii: itemize. (line 4347) * \leftmarginiii: itemize. (line 4347) * \leftmarginiv: itemize. (line 4347) * \leftmarginv: itemize. (line 4347) * \leftmarginvi: itemize. (line 4347) * \Leftrightarrow: Math symbols. (line 9463) * \leftrightarrow: Math symbols. (line 9467) * \leq: Math symbols. (line 9471) * \lfloor: Math symbols. (line 9474) * \lg: Math functions. (line 10558) * \lhd: Math symbols. (line 9477) * \lim: Math functions. (line 10561) * \liminf: Math functions. (line 10564) * \limsup: Math functions. (line 10567) * \line: \line. (line 5156) * \linebreak: \linebreak & \nolinebreak. (line 6757) * \lineskip: \baselineskip & \baselinestretch. (line 2357) * \lineskiplimit: \baselineskip & \baselinestretch. (line 2357) * \linespread: Low-level font commands. (line 2005) * \linespread <1>: \baselineskip & \baselinestretch. (line 2318) * \linethickness: \linethickness. (line 5200) * \linewidth: Page layout parameters. (line 2212) * \linewidth <1>: Page layout parameters. (line 2213) * \listoffigures: Table of contents etc.. (line 14465) * \listoffigures <1>: \contentsline. (line 14760) * \listoftables: Table of contents etc.. (line 14465) * \listoftables <1>: \contentsline. (line 14760) * \listparindent: list. (line 4524) * \ll: Math symbols. (line 9483) * \ln: Math functions. (line 10570) * \lnot: Math symbols. (line 9486) * \LoadClass: Class and package commands. (line 1060) * \LoadClassWithOptions: Class and package commands. (line 1060) * \location: \location. (line 15514) * \log: Math functions. (line 10573) * \long: \newcommand & \renewcommand. (line 7256) * \longleftarrow: Math symbols. (line 9489) * \longleftrightarrow: Math symbols. (line 9493) * \longmapsto: Math symbols. (line 9497) * \longrightarrow: Math symbols. (line 9501) * \lor: Math symbols. (line 9505) * \lq: Text symbols. (line 13737) * \mainmatter: \frontmatter & \mainmatter & \backmatter. (line 3111) * \makeatother: \makeatletter & \makeatother. (line 7440) * \makeatother <1>: \makeatletter & \makeatother. (line 7440) * \makebox: \mbox & \makebox. (line 12227) * \makebox (for picture): \makebox (picture). (line 5353) * \makeglossary: Glossaries. (line 15230) * \makeglossary <1>: Glossaries. (line 15267) * \makeindex: Indexes. (line 14857) * \makelabel: list. (line 4443) * \makelabels: \makelabels. (line 15524) * \maketitle: \maketitle. (line 11169) * \mapsto: Math symbols. (line 9509) * \marginpar: Marginal notes. (line 8962) * \marginparpush: Page layout parameters. (line 2219) * \marginparpush <1>: Page layout parameters. (line 2222) * \marginparpush <2>: Marginal notes. (line 8991) * \marginparsep: Marginal notes. (line 8996) * \marginparwidth: Page layout parameters. (line 2221) * \marginparwidth <1>: Page layout parameters. (line 2222) * \marginparwidth <2>: Marginal notes. (line 9000) * \marginsep: Page layout parameters. (line 2220) * \marginsep <1>: Page layout parameters. (line 2222) * \markboth{LEFT-HEAD}{RIGHT-HEAD}: \pagestyle. (line 11369) * \markright{RIGHT-HEAD}: \pagestyle. (line 11378) * \mathbf: Font styles. (line 1808) * \mathcal: Font styles. (line 1824) * \mathdollar: Math symbols. (line 9969) * \mathellipsis: Dots. (line 10406) * \mathnormal: Font styles. (line 1821) * \mathparagraph: Math symbols. (line 9972) * \mathring: Math accents. (line 10645) * \mathrm: Font styles. (line 1805) * \mathsection: Math symbols. (line 9975) * \mathsf: Font styles. (line 1811) * \mathsterling: Math symbols. (line 9978) * \mathstrut: \mathstrut. (line 10908) * \mathtt: Font styles. (line 1814) * \mathunderscore: Math symbols. (line 9981) * \mathversion: Font styles. (line 1826) * \max: Math functions. (line 10576) * \mbox: \mbox & \makebox. (line 12227) * \mdseries: Font styles. (line 1734) * \medbreak: \bigbreak & \medbreak & \smallbreak. (line 11978) * \medskip: \bigskip & \medskip & \smallskip. (line 11929) * \medskip <1>: \bigskip & \medskip & \smallskip. (line 11956) * \medskipamount: \bigskip & \medskip & \smallskip. (line 11957) * \medspace: Spacing in math mode. (line 10740) * \message: \message. (line 15969) * \mho: Math symbols. (line 9513) * \mid: Math symbols. (line 9516) * \min: Math functions. (line 10579) * \models: Math symbols. (line 9526) * \month: \day & \month & \year. (line 8317) * \mp: Math symbols. (line 9530) * \mu: Math symbols. (line 9533) * \multicolumn: \multicolumn. (line 5883) * \multiput: \multiput. (line 5069) * \nabla: Math symbols. (line 9536) * \name: \name. (line 15581) * \natural: Math symbols. (line 9539) * \ne: Math symbols. (line 9542) * \nearrow: Math symbols. (line 9545) * \NeedsTeXFormat: Class and package commands. (line 1094) * \neg: Math symbols. (line 9548) * \negmedspace: Spacing in math mode. (line 10746) * \negthickspace: Spacing in math mode. (line 10734) * \negthinspace: Spacing in math mode. (line 10765) * \negthinspace <1>: \thinspace & \negthinspace. (line 11806) * \neq: Math symbols. (line 9552) * \newcommand: \newcommand & \renewcommand. (line 7234) * \newcounter: \newcounter. (line 7558) * \newenvironment: \newenvironment & \renewenvironment. (line 7651) * \newfont: \newfont. (line 7897) * \newglossaryentry: \newglossaryentry. (line 15278) * \newlength: \newlength. (line 7599) * \newline: \newline. (line 6615) * \: \(SPACE). (line 11687) * \newpage: \newpage. (line 6862) * \newsavebox: \newsavebox. (line 7623) * \newtheorem: \newtheorem. (line 7785) * \newtie: Accents. (line 13997) * \newwrite: \write. (line 15862) * \ng: Additional Latin letters. (line 14091) * \NG: Additional Latin letters. (line 14091) * \ni: Math symbols. (line 9555) * \nocite: \nocite. (line 6193) * \nocite and internal \citation: BibTeX error messages. (line 6287) * \nocite {*}, for all keys: Using BibTeX. (line 6263) * \nocorr: Font styles. (line 1719) * \nocorrlist: Font styles. (line 1719) * \nofiles: \nofiles. (line 14801) * \noindent: \indent & \noindent. (line 8881) * \nolinebreak: \linebreak & \nolinebreak. (line 6757) * \nonfrenchspacing: \frenchspacing & \nonfrenchspacing. (line 11656) * \nonumber: eqnarray. (line 4022) * \nopagebreak: \pagebreak & \nopagebreak. (line 6920) * \normalfont: Font styles. (line 1755) * \normalmarginpar: Marginal notes. (line 8978) * \normalsfcodes: \normalsfcodes. (line 11677) * \normalsize: Font sizes. (line 1847) * \not: Math symbols. (line 9559) * \notin: Math symbols. (line 9567) * \nu: Math symbols. (line 9571) * \numberline: \numberline. (line 14826) * \nwarrow: Math symbols. (line 9574) * \o (ø): Additional Latin letters. (line 14095) * \O (Ø): Additional Latin letters. (line 14095) * \obeycr: \obeycr & \restorecr. (line 6575) * \oddsidemargin: Document class options. (line 811) * \oddsidemargin <1>: Page layout parameters. (line 2245) * \oddsidemargin <2>: Page layout parameters. (line 2247) * \odot: Math symbols. (line 9577) * \oe (œ): Additional Latin letters. (line 14099) * \OE (Œ): Additional Latin letters. (line 14099) * \oint: Math symbols. (line 9581) * \oldstylenums: Font styles. (line 1830) * \Omega: Math symbols. (line 9584) * \omega: Math symbols. (line 9587) * \ominus: Math symbols. (line 9590) * \onecolumn: \onecolumn. (line 2033) * \openin: \openin & \openout. (line 15671) * \opening: \opening. (line 15591) * \openout: \openin & \openout. (line 15671) * \oplus: Math symbols. (line 9593) * \OptionNotUsed: Class and package commands. (line 1112) * \oslash: Math symbols. (line 9597) * \otimes: Math symbols. (line 9600) * \oval: \oval. (line 5248) * \overbrace{MATH}: Over- and Underlining. (line 10699) * \overline{TEXT}: Over- and Underlining. (line 10680) * \owns: Math symbols. (line 9604) * \P: Text symbols. (line 13740) * \PackageError: Class and package commands. (line 953) * \PackageInfo: Class and package commands. (line 953) * \PackageInfoNoLine: Class and package commands. (line 953) * \PackageWarning: Class and package commands. (line 953) * \PackageWarningNoLine: Class and package commands. (line 953) * \pagebreak: \pagebreak & \nopagebreak. (line 6920) * \pagenumbering: \pagenumbering. (line 11241) * \pageref: \pageref. (line 3448) * \pagestyle: \pagestyle. (line 11299) * \paperheight: Page layout parameters. (line 2258) * \paperheight <1>: Page layout parameters. (line 2259) * \paperwidth: Page layout parameters. (line 2264) * \paperwidth <1>: Page layout parameters. (line 2265) * \par: \par. (line 8828) * \paragraph: Sectioning. (line 2636) * \paragraph <1>: \subsubsection & \paragraph & \subparagraph. (line 3012) * \parallel: Math symbols. (line 9608) * \parbox: \parbox. (line 12383) * \parindent: minipage. (line 4863) * \parindent <1>: \indent & \noindent. (line 8918) * \parindent <2>: \parindent & \parskip. (line 8930) * \parsep: list. (line 4530) * \parskip: \parindent & \parskip. (line 8930) * \parskip example: itemize. (line 4367) * \part: Sectioning. (line 2636) * \part <1>: \part. (line 2723) * \partial: Math symbols. (line 9611) * \partopsep: list. (line 4539) * \PassOptionsToClass: Class and package commands. (line 1118) * \PassOptionsToPackage: Class and package commands. (line 1118) * \pdfpageheight: Document class options. (line 767) * \pdfpagewidth: Document class options. (line 767) * \perp: Math symbols. (line 9614) * \phantom: \phantom & \vphantom & \hphantom. (line 10845) * \Phi: Math symbols. (line 9618) * \phi: Math symbols. (line 9621) * \Pi: Math symbols. (line 9625) * \pi: Math symbols. (line 9628) * \pm: Math symbols. (line 9632) * \pmod: Math functions. (line 10582) * \poptabs: tabbing. (line 5606) * \poptabs <1>: tabbing. (line 5607) * \pounds: Text symbols. (line 13744) * \Pr: Math functions. (line 10585) * \prec: Math symbols. (line 9635) * \preceq: Math symbols. (line 9638) * \prevdepth: \baselineskip & \baselinestretch. (line 2357) * \prime: Math symbols. (line 9642) * \printglossaries: Glossaries. (line 15230) * \printglossaries <1>: Glossaries. (line 15267) * \printindex: \printindex. (line 15215) * \ProcessOptions: Class and package commands. (line 1155) * \ProcessOptions*: Class and package commands. (line 1155) * \prod: Math symbols. (line 9651) * \propto: Math symbols. (line 9654) * \protect: \protect. (line 7929) * \protected@write: \write. (line 15908) * \providecommand: \providecommand. (line 7411) * \ProvidesClass: Class and package commands. (line 1193) * \ProvidesFile: Class and package commands. (line 1226) * \ProvidesPackage: Class and package commands. (line 1193) * \ProvideTextCommand: \DeclareTextCommand & \ProvideTextCommand. (line 1472) * \ProvideTextCommandDefault: \DeclareTextCommandDefault & \ProvideTextCommandDefault. (line 1521) * \ps: \ps. (line 15603) * \Psi: Math symbols. (line 9657) * \psi: Math symbols. (line 9660) * \pushtabs: tabbing. (line 5609) * \put: \put. (line 5051) * \qbezier: \qbezier. (line 5092) * \qquad: Spacing in math mode. (line 10779) * \qquad <1>: \enspace & \quad & \qquad. (line 11419) * \quad: Spacing in math mode. (line 10773) * \quad <1>: \enspace & \quad & \qquad. (line 11419) * \quotedblbase („): Text symbols. (line 13748) * \quotesinglbase (‚): Text symbols. (line 13749) * \r (ring accent): Accents. (line 13991) * \raggedbottom: \raggedbottom. (line 2174) * \raggedleft: \raggedleft. (line 4268) * \raggedright: \raggedright. (line 4215) * \raisebox: \raisebox. (line 12434) * \rangle: Math symbols. (line 9663) * \rbrace: Math symbols. (line 9667) * \rbrack: Math symbols. (line 9670) * \rceil: Math symbols. (line 9674) * \Re: Math symbols. (line 9677) * \read: \read. (line 15735) * \ref: \ref. (line 3472) * \reflectbox: \scalebox. (line 13538) * \refname: thebibliography. (line 6068) * \refstepcounter: \refstepcounter. (line 8284) * \renewcommand: \newcommand & \renewcommand. (line 7234) * \renewenvironment: \newenvironment & \renewenvironment. (line 7651) * \RequirePackage: Class and package commands. (line 1235) * \RequirePackage, and texput jobname: Jobname. (line 16327) * \RequirePackageWithOptions: Class and package commands. (line 1235) * \resizebox: \resizebox. (line 13570) * \restorecr: \obeycr & \restorecr. (line 6575) * \restriction: Math symbols. (line 9682) * \revemptyset: Math symbols. (line 9687) * \reversemarginpar: Marginal notes. (line 8978) * \rfloor: Math symbols. (line 9692) * \rhd: Math symbols. (line 9696) * \rho: Math symbols. (line 9702) * \right: \left & \right. (line 10193) * \Rightarrow: Math symbols. (line 9706) * \rightarrow: Math symbols. (line 9710) * \rightharpoondown: Math symbols. (line 9714) * \rightharpoonup: Math symbols. (line 9717) * \rightleftharpoons: Math symbols. (line 9720) * \rightmargin: list. (line 4554) * \rm: Font styles. (line 1781) * \rmfamily: Font styles. (line 1728) * \roman{COUNTER}: \alph \Alph \arabic \roman \Roman \fnsymbol. (line 8156) * \Roman{COUNTER}: \alph \Alph \arabic \roman \Roman \fnsymbol. (line 8161) * \rotatebox: \rotatebox. (line 13470) * \rq: Text symbols. (line 13752) * \rule: \rule. (line 14167) * \S: Text symbols. (line 13755) * \samepage: \pagebreak & \nopagebreak. (line 6958) * \savebox: \sbox & \savebox. (line 12480) * \sbox: \sbox & \savebox. (line 12480) * \sc: Font styles. (line 1784) * \scalebox: \scalebox. (line 13538) * \scriptscriptstyle: Math styles. (line 10953) * \scriptsize: Font sizes. (line 1847) * \scriptstyle: Math styles. (line 10953) * \scshape: Font styles. (line 1749) * \searrow: Math symbols. (line 9723) * \sec: Math functions. (line 10588) * \section: Sectioning. (line 2636) * \section <1>: \section. (line 2870) * \seename: \index. (line 14991) * \selectfont: Low-level font commands. (line 2011) * \setcounter: \setcounter. (line 8250) * \setlength: \setlength. (line 8497) * \setminus: Math symbols. (line 9726) * \settodepth: \settodepth. (line 8561) * \settoheight: \settoheight. (line 8586) * \settowidth: \settowidth. (line 8611) * \sf: Font styles. (line 1787) * \sffamily: Font styles. (line 1746) * \sharp: Math symbols. (line 9731) * \ShellEscape: \write18. (line 16098) * \shipout and expansion: \write. (line 15903) * \shortstack: \shortstack. (line 5285) * \Sigma: Math symbols. (line 9734) * \sigma: Math symbols. (line 9737) * \signature: \signature. (line 15620) * \sim: Math symbols. (line 9741) * \simeq: Math symbols. (line 9744) * \sin: Math functions. (line 10591) * \sinh: Math functions. (line 10594) * \sl: Font styles. (line 1790) * \sloppy: \fussy & \sloppy. (line 6696) * \slshape: Font styles. (line 1743) * \small: Font sizes. (line 1847) * \smallbreak: \bigbreak & \medbreak & \smallbreak. (line 11978) * \smallint: Math symbols. (line 9747) * \smallskip: \bigskip & \medskip & \smallskip. (line 11929) * \smallskip <1>: \bigskip & \medskip & \smallskip. (line 11961) * \smallskipamount: \bigskip & \medskip & \smallskip. (line 11962) * \smile: Math symbols. (line 9751) * \: \(SPACE). (line 11687) * \ <1>: \(SPACE). (line 11687) * \space: \include & \includeonly. (line 14390) * \space <1>: \input. (line 14453) * \space <2>: \typeout. (line 15827) * \spacefactor: \spacefactor. (line 11552) * \spadesuit: Math symbols. (line 9754) * \sqcap: Math symbols. (line 9757) * \sqcup: Math symbols. (line 9761) * \sqrt: \sqrt. (line 11052) * \sqsubset: Math symbols. (line 9765) * \sqsubseteq: Math symbols. (line 9770) * \sqsupset: Math symbols. (line 9774) * \sqsupseteq: Math symbols. (line 9779) * \ss (ß): Additional Latin letters. (line 14103) * \SS (SS): Additional Latin letters. (line 14103) * \stackrel: \stackrel. (line 11069) * \star: Math symbols. (line 9783) * \stepcounter: \stepcounter. (line 8302) * \stop: Recovering from errors. (line 16383) * \stretch: \stretch. (line 8636) * \strut: \strut. (line 12005) * \subitem: Produce the index manually. (line 14928) * \subparagraph: Sectioning. (line 2636) * \subparagraph <1>: \subsubsection & \paragraph & \subparagraph. (line 3012) * \subsection: Sectioning. (line 2636) * \subsection <1>: \subsection. (line 2948) * \subset: Math symbols. (line 9790) * \subseteq: Math symbols. (line 9793) * \subsubitem: Produce the index manually. (line 14928) * \subsubsection: Sectioning. (line 2636) * \subsubsection <1>: \subsubsection & \paragraph & \subparagraph. (line 3012) * \succ: Math symbols. (line 9796) * \succeq: Math symbols. (line 9799) * \sum: Math symbols. (line 9803) * \sup: Math functions. (line 10597) * \suppressfloats: Floats. (line 2493) * \supset: Math symbols. (line 9806) * \supseteq: Math symbols. (line 9809) * \surd: Math symbols. (line 9812) * \swarrow: Math symbols. (line 9817) * \symbf: OpenType bold math. (line 10087) * \symbfit: OpenType bold math. (line 10087) * \symbol: Symbols by font position. (line 13688) * \t (tie-after accent): Accents. (line 13997) * \: \(SPACE). (line 11687) * \tabbingsep: tabbing. (line 5614) * \tabcolsep: tabular. (line 5872) * \tableofcontents: Table of contents etc.. (line 14465) * \tableofcontents <1>: \contentsline. (line 14760) * \tan: Math functions. (line 10600) * \tanh: Math functions. (line 10603) * \tau: Math symbols. (line 9820) * \telephone: \telephone. (line 15650) * \TeX: Text symbols. (line 13759) * \textascendercompwordmark: Text symbols. (line 13804) * \textasciicircum: Text symbols. (line 13762) * \textasciitilde: Text symbols. (line 13765) * \textasteriskcentered: Text symbols. (line 13768) * \textbackslash: Reserved characters. (line 13617) * \textbackslash <1>: Text symbols. (line 13771) * \textbar: Text symbols. (line 13779) * \textbardbl: Text symbols. (line 13782) * \textbf: Font styles. (line 1737) * \textbigcircle: Text symbols. (line 13785) * \textbraceleft: Text symbols. (line 13788) * \textbraceright: Text symbols. (line 13792) * \textbullet: Text symbols. (line 13796) * \textcapitalcompwordmark: Text symbols. (line 13803) * \textcircled{LETTER}: Text symbols. (line 13799) * \textcompwordmark: Text symbols. (line 13802) * \textcopyright: Text symbols. (line 13708) * \textdagger: Text symbols. (line 13811) * \textdaggerdbl: Text symbols. (line 13814) * \textdollar (or \$): Text symbols. (line 13817) * \textellipsis: Text symbols. (line 13731) * \textemdash (or ---): Text symbols. (line 13820) * \textendash (or --): Text symbols. (line 13826) * \texteuro: Text symbols. (line 13829) * \textexclamdown (or !`): Text symbols. (line 13837) * \textfiguredash: Text symbols. (line 13840) * \textfloatsep: Floats. (line 2529) * \textfloatsep <1>: Floats. (line 2530) * \textfraction: Floats. (line 2508) * \textfraction <1>: Floats. (line 2509) * \textgreater: Text symbols. (line 13847) * \textheight: Page layout parameters. (line 2270) * \textheight <1>: Page layout parameters. (line 2271) * \texthorizontalbar: Text symbols. (line 13850) * \textit: Font styles. (line 1731) * \textleftarrow: Text symbols. (line 13858) * \textless: Text symbols. (line 13855) * \textmd: Font styles. (line 1734) * \textnonbreakinghyphen: Text symbols. (line 13861) * \textnormal: Font styles. (line 1755) * \textordfeminine: Text symbols. (line 13867) * \textordmasculine: Text symbols. (line 13868) * \textparagraph: Text symbols. (line 13741) * \textperiodcentered: Text symbols. (line 13871) * \textquestiondown (or ?`): Text symbols. (line 13874) * \textquotedblleft (or ``): Text symbols. (line 13877) * \textquotedblright (or ''): Text symbols. (line 13880) * \textquoteleft (or `): Text symbols. (line 13883) * \textquoteright (or '): Text symbols. (line 13886) * \textquotesingle: Text symbols. (line 13889) * \textquotestraightbase: Text symbols. (line 13892) * \textquotestraightdblbase: Text symbols. (line 13893) * \textregistered: Text symbols. (line 13896) * \textrightarrow: Text symbols. (line 13899) * \textrm: Font styles. (line 1728) * \textsc: Font styles. (line 1749) * \textsection: Text symbols. (line 13756) * \textsf: Font styles. (line 1746) * \textsl: Font styles. (line 1743) * \textsterling: Text symbols. (line 13745) * \textstyle: Math styles. (line 10953) * \textthreequartersemdash: Text symbols. (line 13902) * \texttrademark: Text symbols. (line 13905) * \texttt: Font styles. (line 1752) * \texttwelveudash: Text symbols. (line 13908) * \textunderscore: Text symbols. (line 13911) * \textup: Font styles. (line 1740) * \textvisiblespace: Text symbols. (line 13914) * \textwidth: Page layout parameters. (line 2278) * \textwidth <1>: Page layout parameters. (line 2279) * \th (þ): Additional Latin letters. (line 14107) * \TH (Þ): Additional Latin letters. (line 14107) * \thanks{TEXT}: \maketitle. (line 11219) * \theta: Math symbols. (line 9823) * \thicklines: \thicklines. (line 5221) * \thickspace: Spacing in math mode. (line 10727) * \thinlines: \thinlines. (line 5213) * \thinspace: Spacing in math mode. (line 10751) * \thinspace <1>: \thinspace & \negthinspace. (line 11806) * \thispagestyle: \thispagestyle. (line 11384) * \tilde: Math accents. (line 10648) * \times: Math symbols. (line 9827) * \tiny: Font sizes. (line 1847) * \title{TEXT}: \maketitle. (line 11226) * \to: Math symbols. (line 9830) * \today: \today. (line 14202) * \top: Math symbols. (line 9834) * \topfraction: Floats. (line 2513) * \topfraction <1>: Floats. (line 2514) * \topmargin: Page layout parameters. (line 2303) * \topsep: list. (line 4559) * \topskip: Page layout parameters. (line 2310) * \topskip <1>: Page layout parameters. (line 2311) * \triangle: Math symbols. (line 9838) * \triangleleft: Math symbols. (line 9841) * \triangleright: Math symbols. (line 9847) * \tt: Font styles. (line 1793) * \ttfamily: Font styles. (line 1752) * \twocolumn: \twocolumn. (line 2045) * \typein: \typein. (line 15766) * \typeout: \typeout. (line 15811) * \u (breve accent): Accents. (line 14003) * \unboldmath: \boldmath & \unboldmath. (line 10028) * \unboldmath <1>: \boldmath & \unboldmath. (line 10036) * \underbar: Accents. (line 13967) * \underbrace{MATH}: Over- and Underlining. (line 10685) * \underline{TEXT}: Over- and Underlining. (line 10669) * \unitlength: picture. (line 4946) * \unlhd: Math symbols. (line 9853) * \unrhd: Math symbols. (line 9859) * \Uparrow: Math symbols. (line 9865) * \uparrow: Math symbols. (line 9869) * \Updownarrow: Math symbols. (line 9873) * \updownarrow: Math symbols. (line 9878) * \upharpoonright: Math symbols. (line 9883) * \uplus: Math symbols. (line 9888) * \upshape: Font styles. (line 1740) * \Upsilon: Math symbols. (line 9893) * \upsilon: Math symbols. (line 9896) * \usebox: \usebox. (line 12589) * \usecounter: \usecounter. (line 8191) * \usefont: Low-level font commands. (line 2019) * \usepackage: Additional packages. (line 832) * \UseTextAccent: \UseTextSymbol & \UseTextAccent. (line 1665) * \UseTextSymbol: \UseTextSymbol & \UseTextAccent. (line 1665) * \v (breve accent): Accents. (line 14007) * \value: \value. (line 8217) * \vanothing: Math symbols. (line 9904) * \varepsilon: Math symbols. (line 9899) * \varphi: Math symbols. (line 9909) * \varpi: Math symbols. (line 9913) * \varrho: Math symbols. (line 9917) * \varsigma: Math symbols. (line 9921) * \vartheta: Math symbols. (line 9925) * \vbox (plain TeX): minipage. (line 4817) * \vdash: Math symbols. (line 9929) * \vdots: Dots. (line 10416) * \vec: Math accents. (line 10651) * \vector: \vector. (line 5331) * \vee: Math symbols. (line 9933) * \verb: \verb. (line 6409) * \Vert: Math symbols. (line 9937) * \vert: Math symbols. (line 9941) * \vfill: \vfill. (line 12141) * \vline: \vline. (line 5965) * \vphantom: \phantom & \vphantom & \hphantom. (line 10845) * \vspace: \vspace. (line 12090) * \vtop plain TeX: minipage. (line 4813) * \wedge: Math symbols. (line 9947) * \widehat: Math accents. (line 10654) * \widetilde: Math accents. (line 10657) * \wlog: \wlog. (line 16015) * \wp: Math symbols. (line 9951) * \wr: Math symbols. (line 9954) * \write: \write. (line 15844) * \write and security: \write and security. (line 15945) * \write streams 16, 17, 18: \write. (line 15924) * \write18: \write18. (line 16033) * \write18, enabling: Command line options. (line 16208) * \Xi: Math symbols. (line 9957) * \xi: Math symbols. (line 9960) * \xspace: xspace package. (line 8056) * \year: \day & \month & \year. (line 8317) * \zeta: Math symbols. (line 9963) * \[...\] display math: displaymath. (line 3860) * \\ (for center): center. (line 3704) * \\ (for eqnarray): eqnarray. (line 4012) * \\ (for flushleft): flushleft. (line 4194) * \\ (for flushright): flushright. (line 4254) * \\ (for letters): Letters. (line 15409) * \\ (for tabular): tabular. (line 5736) * \\ (for verse): verse. (line 6475) * \\ (for \author): \maketitle. (line 11206) * \\ (for \shortstack objects): \shortstack. (line 5314) * \\ (for \title): \maketitle. (line 11227) * \\ (force line break): \\. (line 6513) * \\ (tabbing): tabbing. (line 5559) * \\* (for eqnarray): eqnarray. (line 4018) * \^: Reserved characters. (line 13617) * \^ (circumflex accent): Accents. (line 13954) * \_: Reserved characters. (line 13612) * \` (grave accent): Accents. (line 13958) * \` (tabbing): tabbing. (line 5586) * \{: Reserved characters. (line 13612) * \|: Math symbols. (line 9153) * \}: Reserved characters. (line 13612) * \~: Reserved characters. (line 13617) * \~ (tilde accent): Accents. (line 13962) * ^ superscript: Subscripts & superscripts. (line 9078) * ^^J, in \write: \write. (line 15932) * _ subscript: Subscripts & superscripts. (line 9078) * {...} (for required arguments): LaTeX command syntax. (line 597) * ~: ~. (line 11741) * a4paper option: Document class options. (line 746) * a5paper option: Document class options. (line 746) * abstract environment: abstract. (line 3572) * abstract package: abstract. (line 3593) * abstracts: abstract. (line 3572) * accents: Accents. (line 13920) * accents, defining: \DeclareFontEncoding. (line 1386) * accents, defining <1>: \DeclareTextAccent. (line 1420) * accents, defining <2>: \DeclareTextAccentDefault. (line 1444) * accents, defining <3>: \DeclareTextComposite. (line 1553) * accents, defining <4>: \DeclareTextCompositeCommand. (line 1577) * accents, defining <5>: \DeclareTextSymbolDefault. (line 1622) * accents, mathematical: Math accents. (line 10617) * accessing any character of a font: Symbols by font position. (line 13688) * acronyms, list of: Glossaries. (line 15230) * acute accent: Accents. (line 13943) * acute accent, math: Math accents. (line 10622) * additional packages, loading: Additional packages. (line 832) * adjustbox package: Boxes. (line 12221) * ae ligature: Additional Latin letters. (line 14067) * algorithm2e package: tabbing. (line 5639) * align environment, from amsmath: eqnarray. (line 3989) * aligning equations: eqnarray. (line 3989) * alignment via tabbing: tabbing. (line 5499) * amscd package: Arrows. (line 10022) * amsfonts package: Math formulas. (line 9067) * amsfonts package <1>: Arrows. (line 9987) * amsmath package: array. (line 3667) * amsmath package <1>: array. (line 3675) * amsmath package <2>: displaymath. (line 3856) * amsmath package <3>: equation. (line 4057) * amsmath package <4>: theorem. (line 6319) * amsmath package <5>: Math formulas. (line 9067) * amsmath package <6>: \left & \right. (line 10217) * amsmath package <7>: \bigl & \bigr etc.. (line 10362) * amsmath package <8>: Dots. (line 10419) * amsmath package <9>: Math functions. (line 10606) * amsmath package <10>: Spacing in math mode. (line 10727) * amsmath package <11>: \phantom & \vphantom & \hphantom. (line 10895) * amsmath package <12>: Colon character & \colon. (line 11013) * amsmath package <13>: Colon character & \colon. (line 11017) * amsmath package <14>: \thinspace & \negthinspace. (line 11826) * amsmath package, replacing eqnarray: eqnarray. (line 3989) * amsthm package: theorem. (line 6319) * amsthm package <1>: \rule. (line 14179) * answers package: \write. (line 15937) * appendices: \appendix. (line 3077) * appendix: \appendix. (line 3077) * appendix package: \appendix. (line 3101) * arguments, optional, defining and using: \newcommand & \renewcommand. (line 7277) * aring: Additional Latin letters. (line 14063) * array environment: array. (line 3618) * array package: array. (line 3686) * arrays, math: array. (line 3618) * arrow, left, in text: Text symbols. (line 13859) * arrow, right, in text: Text symbols. (line 13900) * arrows: Arrows. (line 9987) * article class: Document classes. (line 703) * ascender height: Text symbols. (line 13805) * ASCII circumflex, in text: Text symbols. (line 13763) * ASCII tilde, in text: Text symbols. (line 13766) * asterisk, centered, in text: Text symbols. (line 13769) * Asymptote package: \line. (line 5185) * Asymptote package <1>: \strut. (line 12061) * Asymptote package <2>: \mbox & \makebox. (line 12294) * Asymptote package <3>: \write18. (line 16040) * at clause, in font definitions: \newfont. (line 7910) * at-sign: \@. (line 11610) * author, for titlepage: \maketitle. (line 11206) * auxiliary file: Output files. (line 492) * b5paper option: Document class options. (line 746) * babel package: \chapter. (line 2842) * babel package <1>: thebibliography. (line 6077) * babel package <2>: Accents. (line 13920) * babel package <3>: \today. (line 14209) * babel package <4>: Table of contents etc.. (line 14582) * babel package <5>: \index. (line 14991) * back matter of a book: \frontmatter & \mainmatter & \backmatter. (line 3111) * background, colored: Colored pages. (line 12837) * backslash, in text: Text symbols. (line 13772) * badness: Page breaking. (line 6794) * bar, double vertical, in text: Text symbols. (line 13783) * bar, vertical, in text: Text symbols. (line 13780) * bar-over accent: Accents. (line 13950) * bar-over accent, math: Math accents. (line 10625) * bar-under accent: Accents. (line 13965) * basics of LaTeX: Overview. (line 404) * batchmode: Command line options. (line 16174) * beamer package: beamer template. (line 16411) * beamer template and class: beamer template. (line 16411) * beginning of document hook: \AtBeginDocument. (line 3890) * bibliography format, open: Document class options. (line 794) * bibliography, creating (automatically): Using BibTeX. (line 6208) * bibliography, creating (manually): thebibliography. (line 6030) * BibTeX error messages: BibTeX error messages. (line 6270) * bibTeX, using: Using BibTeX. (line 6208) * big circle symbols, in text: Text symbols. (line 13786) * big point: Units of length. (line 8450) * bigfoot package: Footnotes of footnotes. (line 7213) * black boxes, omitting: Document class options. (line 780) * blackboard bold: Blackboard bold. (line 10099) * blanks, after control sequences: \newcommand & \renewcommand. (line 7315) * bm package: bm. (line 10058) * bold font: Font styles. (line 1773) * bold math: Font styles. (line 1826) * bold typewriter, avoiding: description. (line 3814) * boldface mathematics: \boldmath & \unboldmath. (line 10028) * book class: Document classes. (line 703) * book, back matter: \frontmatter & \mainmatter & \backmatter. (line 3111) * book, end matter: \frontmatter & \mainmatter & \backmatter. (line 3111) * book, front matter: \frontmatter & \mainmatter & \backmatter. (line 3111) * book, main matter: \frontmatter & \mainmatter & \backmatter. (line 3111) * bottomnumber: Floats. (line 2536) * bottomnumber <1>: Floats. (line 2537) * bounding box: \includegraphics. (line 13270) * box: \mbox & \makebox. (line 12227) * box, allocating new: \newsavebox. (line 7623) * box, bounding: \includegraphics. (line 13270) * box, colored: Colored boxes. (line 12800) * box, save: \sbox & \savebox. (line 12480) * box, use saved box: \usebox. (line 12589) * boxes: Boxes. (line 12218) * bp: Units of length. (line 8449) * brace, left, in text: Text symbols. (line 13789) * brace, right, in text: Text symbols. (line 13793) * braces: Delimiters. (line 10143) * brackets: Delimiters. (line 10143) * breaking lines: Line breaking. (line 6496) * breaking pages: Page breaking. (line 6789) * breaks, multiplication discretionary: \*. (line 11024) * breve accent: Accents. (line 14003) * breve accent, math: Math accents. (line 10628) * bug reporting: About this document. (line 380) * bullet lists: itemize. (line 4295) * bullet symbol: Math symbols. (line 9243) * bullet, in text: Text symbols. (line 13797) * bulleted lists: itemize. (line 4295) * calligraphic fonts: Calligraphic. (line 10126) * calligraphic letters for math: Font styles. (line 1776) * cap height: Text symbols. (line 13805) * caption package: \caption. (line 2628) * captions: \caption. (line 2562) * caron accent: Accents. (line 14007) * catcode: \makeatletter & \makeatother. (line 7452) * category code, character: \makeatletter & \makeatother. (line 7452) * cc: Units of length. (line 8462) * cc list, in letters: \cc. (line 15470) * cedilla accent: Accents. (line 13975) * center environment: center. (line 3694) * centered asterisk, in text: Text symbols. (line 13769) * centered equations: Document class options. (line 784) * centered period, in text: Text symbols. (line 13872) * centering text, declaration for: \centering. (line 3742) * centering text, environment for: center. (line 3694) * centimeter: Units of length. (line 8457) * changing case of characters: Upper and lower case. (line 13635) * chapter: Sectioning. (line 2636) * chapter <1>: \chapter. (line 2777) * chapter counter: Counters. (line 8117) * character category code: \makeatletter & \makeatother. (line 7452) * character encoding: inputenc package. (line 14123) * character, invisible: \phantom & \vphantom & \hphantom. (line 10845) * character, invisible <1>: \mathstrut. (line 10908) * characters, accented: Accents. (line 13920) * characters, case of: Upper and lower case. (line 13635) * characters, non-English: Additional Latin letters. (line 14057) * characters, reserved: Reserved characters. (line 13605) * characters, special: Reserved characters. (line 13605) * check accent: Accents. (line 14007) * check accent, math: Math accents. (line 10631) * cicero: Units of length. (line 8463) * circle symbol, big, in text: Text symbols. (line 13786) * circled letter, in text: Text symbols. (line 13800) * circumflex accent: Accents. (line 13954) * circumflex accent, math: Math accents. (line 10643) * circumflex, ASCII, in text: Text symbols. (line 13763) * citation key: \bibitem. (line 6094) * class and package commands: Class and package commands. (line 918) * class and package difference: Class and package construction. (line 857) * class and package structure: Class and package structure. (line 871) * class file example: Class and package structure. (line 904) * class file layout: Class and package structure. (line 871) * class options: Document class options. (line 733) * class options <1>: Class and package structure. (line 871) * class options <2>: Class and package commands. (line 978) * classes of documents: Document classes. (line 698) * cleveref package: Cross references. (line 3382) * cleveref package <1>: \ref. (line 3495) * cleveref package <2>: \footnotemark. (line 7094) * CLI: Command line interface. (line 16109) * clock option to slides class: Document class options. (line 826) * closing letters: \closing. (line 15486) * closing quote: Text symbols. (line 13753) * cm: Units of length. (line 8456) * cm-super package: fontenc package. (line 1330) * cmd.exe, used by \write18: \write18. (line 16087) * code, typesetting: verbatim. (line 6366) * colon character: Colon character & \colon. (line 11004) * color: Color. (line 12602) * color <1>: Define colors. (line 12707) * color <2>: Colored text. (line 12729) * color <3>: Colored boxes. (line 12800) * color <4>: Colored pages. (line 12837) * color models: Color models. (line 12655) * color package commands: Commands for color. (line 12702) * color package options: Color package options. (line 12617) * color, define: Define colors. (line 12707) * colored boxes: Colored boxes. (line 12800) * colored page: Colored pages. (line 12837) * colored text: Colored text. (line 12729) * command line interface: Command line interface. (line 16109) * command syntax: LaTeX command syntax. (line 597) * commands, class and package: Class and package commands. (line 918) * commands, defining new ones: \newcommand & \renewcommand. (line 7234) * commands, defining new ones <1>: \providecommand. (line 7411) * commands, document class: Class and package construction. (line 848) * commands, graphics package: Commands for graphics. (line 13149) * commands, ignore spaces: \ignorespaces & \ignorespacesafterend. (line 7981) * commands, ignore spaces <1>: xspace package. (line 8056) * commands, redefining: \newcommand & \renewcommand. (line 7234) * commands, run from LaTeX: \write18. (line 16033) * commands, star-variants: \@ifstar. (line 7486) * composite word mark, in text: Text symbols. (line 13805) * comprehensive package: Math symbols. (line 9141) * computer programs, typesetting: verbatim. (line 6366) * configuration, graphics package: Graphics package configuration. (line 12959) * contents file: Output files. (line 502) * control sequences: Control sequences. (line 7376) * control symbol, defined: Control sequences. (line 7387) * control word, defined: Control sequences. (line 7383) * copyright symbol: Text symbols. (line 13709) * counters, a list of: Counters. (line 8108) * counters, defining new: \newcounter. (line 7558) * counters, getting value of: \value. (line 8217) * counters, printing: \alph \Alph \arabic \roman \Roman \fnsymbol. (line 8135) * counters, setting: \setcounter. (line 8250) * cprotect package: verbatim. (line 6385) * cprotect package <1>: \verb. (line 6448) * creating pictures: picture. (line 4924) * creating tables: table. (line 5648) * credit footnote: \maketitle. (line 11220) * cross references: Cross references. (line 3350) * cross references, resolving: Output files. (line 492) * cross referencing with page number: \pageref. (line 3448) * cross referencing, across documents: xr package. (line 3501) * cross referencing, symbolic: \ref. (line 3472) * CTAN: CTAN. (line 670) * curly braces: Delimiters. (line 10143) * currency, dollar: Text symbols. (line 13818) * currency, euro: Text symbols. (line 13830) * dagger, double, in text: Text symbols. (line 13815) * dagger, in text: Text symbols. (line 13712) * dagger, in text <1>: Text symbols. (line 13812) * DANTE e.V.: CTAN. (line 684) * datatool package: \read. (line 15760) * date, for titlepage: \maketitle. (line 11214) * date, today’s: \today. (line 14202) * datetime package: \today. (line 14223) * dbltopnumber: Floats. (line 2540) * dbltopnumber <1>: Floats. (line 2541) * dcolumn package: array. (line 3686) * dd: Units of length. (line 8459) * declaration form of font size commands: Font sizes. (line 1860) * declaration form of font style commands: Font styles. (line 1705) * define color: Define colors. (line 12707) * defining a new command: \newcommand & \renewcommand. (line 7234) * defining a new command <1>: \providecommand. (line 7411) * defining new environments: \newenvironment & \renewenvironment. (line 7651) * defining new fonts: \newfont. (line 7897) * defining new theorems: \newtheorem. (line 7785) * definitions: Definitions. (line 7229) * delayed \write: \write. (line 15903) * delimiters: Delimiters. (line 10143) * delimiters, paired: \left & \right. (line 10193) * delim_0: makeindex. (line 15159) * delim_1: makeindex. (line 15163) * delim_2: makeindex. (line 15167) * delim_n: makeindex. (line 15171) * delim_r: makeindex. (line 15175) * description: \newglossaryentry. (line 15318) * description environment: description. (line 3784) * description lists, creating: description. (line 3784) * design size, in font definitions: \newfont. (line 7910) * didot point: Units of length. (line 8460) * dieresis accent: Accents. (line 13939) * difference between class and package: Class and package construction. (line 857) * dimen plain TeX: Lengths. (line 8342) * directory listings, from system: \write18. (line 16092) * discretionary breaks, multiplication: \*. (line 11024) * discretionary hyphenation: \discretionary. (line 6673) * display math mode: Modes. (line 11104) * display style: Math styles. (line 10942) * displaying quoted text with paragraph indentation: quotation & quote. (line 5469) * displaying quoted text without paragraph indentation: quotation & quote. (line 5469) * displaymath environment: displaymath. (line 3840) * displaymath environment <1>: Math formulas. (line 9012) * document class commands: Class and package construction. (line 848) * document class options: Document class options. (line 733) * document class, defined: Starting and ending. (line 444) * document classes: Document classes. (line 698) * document environment: document. (line 3884) * document root name: Jobname. (line 16301) * document templates: Document templates. (line 16404) * dollar sign: Text symbols. (line 13818) * dot accent: Accents. (line 13946) * dot over accent, math: Math accents. (line 10637) * dot-over accent: Accents. (line 13946) * dot-under accent: Accents. (line 13979) * dotless i: Accents. (line 13933) * dotless i, math: Math symbols. (line 9390) * dotless j: Accents. (line 13933) * dotless j, math: Math symbols. (line 9410) * dots: Dots. (line 10387) * double angle quotation marks: Text symbols. (line 13727) * double dagger, in text: Text symbols. (line 13715) * double dagger, in text <1>: Text symbols. (line 13815) * double dot accent, math: Math accents. (line 10634) * double guillemets: Text symbols. (line 13727) * double left quote: Text symbols. (line 13878) * double low-9 quotation mark: Text symbols. (line 13750) * double quote, straight base: Text symbols. (line 13894) * double right quote: Text symbols. (line 13881) * double spacing: \baselineskip & \baselinestretch. (line 2318) * double vertical bar, in text: Text symbols. (line 13783) * doublestruck: Blackboard bold. (line 10099) * draft option: Document class options. (line 776) * dvilualatex-dev: TeX engines. (line 568) * dvipdfmx command: Output files. (line 469) * dvips command: Output files. (line 469) * dvitype command: Output files. (line 469) * e-dash: Text symbols. (line 13827) * e-TeX: TeX engines. (line 521) * ellipses: Dots. (line 10387) * ellipsis: Text symbols. (line 13733) * ellipsis, in Unicode (U+2026): Dots. (line 10447) * ellipsis, traditional (three periods): Dots. (line 10447) * em: Units of length. (line 8476) * em <1>: Units of length. (line 8475) * em-dash: Text symbols. (line 13821) * em-dash, three-quarters: Text symbols. (line 13903) * em-dash, two-thirds: Text symbols. (line 13909) * emphasis: Font styles. (line 1757) * enclosure list: \encl. (line 15499) * encoding, font: \DeclareFontEncoding. (line 1386) * encoding, of input files: inputenc package. (line 14123) * end matter of a book: \frontmatter & \mainmatter & \backmatter. (line 3111) * end of document hook: \AtEndDocument. (line 3906) * ending and starting: Starting and ending. (line 433) * engines, TeX: TeX engines. (line 511) * enlarge current page: \enlargethispage. (line 6895) * enumerate environment: enumerate. (line 3922) * enumi counter: Counters. (line 8117) * enumii counter: Counters. (line 8117) * enumiii counter: Counters. (line 8117) * enumitem package: itemize. (line 4355) * enumitem package <1>: list. (line 4654) * enumiv counter: Counters. (line 8117) * environment: Starting and ending. (line 452) * environment form of font size commands: Font sizes. (line 1883) * environment, abstract: abstract. (line 3572) * environment, array: array. (line 3618) * environment, center: center. (line 3694) * environment, description: description. (line 3784) * environment, displaymath: displaymath. (line 3840) * environment, displaymath <1>: Math formulas. (line 9012) * environment, document: document. (line 3884) * environment, enumerate: enumerate. (line 3922) * environment, eqnarray: eqnarray. (line 3989) * environment, equation: equation. (line 4043) * environment, equation <1>: Math formulas. (line 9012) * environment, figure: figure. (line 4063) * environment, filecontents: filecontents. (line 4121) * environment, filecontents*: filecontents. (line 4121) * environment, flushleft: flushleft. (line 4186) * environment, flushright: flushright. (line 4248) * environment, itemize: itemize. (line 4295) * environment, letter: letter. (line 4383) * environment, list: list. (line 4388) * environment, math: math. (line 4754) * environment, math <1>: Math formulas. (line 9012) * environment, minipage: minipage. (line 4766) * environment, picture: picture. (line 4924) * environment, quotation: quotation & quote. (line 5469) * environment, quote: quotation & quote. (line 5469) * environment, sloppypar: sloppypar. (line 6710) * environment, tabbing: tabbing. (line 5499) * environment, table: table. (line 5648) * environment, tabular: tabular. (line 5706) * environment, thebibliography: thebibliography. (line 6030) * environment, theindex: Produce the index manually. (line 14915) * environment, theorem: theorem. (line 6297) * environment, theorem-like: \newtheorem. (line 7785) * environment, titlepage: titlepage. (line 6327) * environment, verbatim: verbatim. (line 6366) * environment, verse: verse. (line 6460) * environments: Environments. (line 3555) * environments, defining: \newenvironment & \renewenvironment. (line 7651) * envlab package: \makelabels. (line 15573) * EPS files: \includegraphics. (line 13155) * eqnarray environment: eqnarray. (line 3989) * equation counter: Counters. (line 8117) * equation environment: equation. (line 4043) * equation environment <1>: Math formulas. (line 9012) * equation number, cross referencing: \ref. (line 3472) * equation numbers, left vs. right: Document class options. (line 790) * equation numbers, omitting: eqnarray. (line 4022) * equations, aligning: eqnarray. (line 3989) * equations, environment for: equation. (line 4043) * equations, flush left vs. centered: Document class options. (line 784) * error messages, from BibTeX: BibTeX error messages. (line 6270) * errorstopmode: Command line options. (line 16174) * es-zet German letter: Additional Latin letters. (line 14103) * etex command: TeX engines. (line 521) * eth, Icelandic letter: Additional Latin letters. (line 14071) * etoolbox package: Class and package commands. (line 1022) * euro symbol: Text symbols. (line 13830) * eurosym package: Text symbols. (line 13830) * eurosym package <1>: Text symbols. (line 13831) * ex: Units of length. (line 8472) * ex <1>: Units of length. (line 8471) * exclamation point, upside-down: Text symbols. (line 13838) * executivepaper option: Document class options. (line 746) * expl3 package: LaTeX command syntax. (line 626) * expl3 package <1>: Upper and lower case. (line 13677) * exponent: Subscripts & superscripts. (line 9078) * expressions: Expressions. (line 8672) * extended Latin: Additional Latin letters. (line 14057) * external commands: \write18. (line 16033) * external files, writing: filecontents. (line 4121) * fallback jobname: Jobname. (line 16322) * families, of fonts: Low-level font commands. (line 1914) * fancyhdr package: Page styles. (line 11163) * fancyhdr package <1>: \pagestyle. (line 11306) * fancyvrb package: tabbing. (line 5639) * fancyvrb package <1>: verbatim. (line 6401) * feminine ordinal symbol: Text symbols. (line 13869) * figure counter: Counters. (line 8117) * figure dash character: Text symbols. (line 13841) * figure environment: figure. (line 4063) * figure number, cross referencing: \ref. (line 3472) * figures, footnotes in: minipage. (line 4867) * figures, inserting: figure. (line 4063) * file, closing: \openin & \openout. (line 15671) * file, opening: \openin & \openout. (line 15671) * file, reading: \read. (line 15735) * file, root: Splitting the input. (line 14237) * file, root <1>: Jobname. (line 16301) * filecontents environment: filecontents. (line 4121) * filecontents* environment: filecontents. (line 4121) * filename for current job: Command line options. (line 16190) * final option: Document class options. (line 776) * first-latex-doc document: About this document. (line 392) * fixed-width font: Font styles. (line 1794) * flafter package: Floats. (line 2488) * fleqn option: Document class options. (line 776) * float package: Floats. (line 2458) * float page: Floats. (line 2464) * flush left equations: Document class options. (line 784) * flushing floats and starting a page: \clearpage & \cleardoublepage. (line 6820) * flushleft environment: flushleft. (line 4186) * flushright environment: flushright. (line 4248) * font catalogue: Low-level font commands. (line 1914) * font commands, low-level: Low-level font commands. (line 1899) * font dimension, slant: \/. (line 11869) * font encoding: fontenc package. (line 1300) * font encoding <1>: \DeclareTextAccent. (line 1420) * font encoding, declaring: \DeclareFontEncoding. (line 1386) * font size: Low-level font commands. (line 1994) * font sizes: Font sizes. (line 1842) * font styles: Font styles. (line 1703) * font symbols, by number: Symbols by font position. (line 13688) * fontenc: fontenc package. (line 1300) * fonts: Fonts. (line 1263) * fonts, new commands for: \newfont. (line 7897) * fonts, script: Calligraphic. (line 10126) * fontspec package: fontenc package. (line 1311) * fontspec package <1>: OpenType bold math. (line 10073) * footer style: \pagestyle. (line 11299) * footer, parameters for: Page layout parameters. (line 2185) * footnote counter: Counters. (line 8117) * footnote number, cross referencing: \ref. (line 3472) * footnote parameters: \footnote. (line 7014) * footnote, in a table: Footnotes in a table. (line 7143) * footnote, in section headings: Footnotes in section headings. (line 7124) * footnote, of a footnote: Footnotes of footnotes. (line 7213) * footnotes in figures: minipage. (line 4867) * footnotes, creating: Footnotes. (line 6967) * footnotes, in a minipage: \footnote. (line 7042) * footnotes, symbols instead of numbers: \footnote. (line 7004) * force option for filecontents: filecontents. (line 4146) * format files, TeX: TeX engines. (line 511) * formulas, environment for: equation. (line 4043) * formulas, math: Math formulas. (line 9012) * forward reference: Cross references. (line 3371) * forward references, resolving: Output files. (line 492) * fraction: \frac. (line 11040) * fragile commands: \protect. (line 7929) * frame rule width: \fbox & \framebox. (line 12348) * frame, line width: \fbox & \framebox. (line 12348) * frame, separation from contents: \fbox & \framebox. (line 12353) * French quotation marks: Text symbols. (line 13727) * front matter of a book: \frontmatter & \mainmatter & \backmatter. (line 3111) * functions, math: Math functions. (line 10501) * geometry package: Document class options. (line 767) * geometry package <1>: Document class options. (line 771) * global options: Document class options. (line 733) * global options <1>: Additional packages. (line 841) * glossaries: Glossaries. (line 15230) * glossary: Glossaries. (line 15230) * glossary, entries: \newglossaryentry. (line 15278) * glossary, entry reference: \gls. (line 15337) * glue plain TeX: Lengths. (line 8342) * glue register, plain TeX: \newlength. (line 7599) * graphics: Graphics. (line 12858) * graphics <1>: Graphics package configuration. (line 12959) * graphics <2>: \includegraphics. (line 13155) * graphics package: Graphics. (line 12858) * graphics package <1>: Graphics package configuration. (line 12959) * graphics package <2>: \includegraphics. (line 13155) * graphics package commands: Commands for graphics. (line 13149) * graphics package options: Graphics package options. (line 12895) * graphics packages: \line. (line 5185) * graphics, resizing: \scalebox. (line 13538) * graphics, resizing <1>: \resizebox. (line 13570) * graphics, scaling: \scalebox. (line 13538) * graphics, scaling <1>: \resizebox. (line 13570) * graphpap package: \graphpaper. (line 5137) * grave accent: Accents. (line 13958) * grave accent, math: Math accents. (line 10640) * greater than symbol, in text: Text symbols. (line 13848) * greek letters: Math symbols. (line 9141) * Greek letters: Greek letters. (line 10458) * grfext package: \DeclareGraphicsExtensions. (line 13067) * group, and environments: Environments. (line 3567) * group_skip: makeindex. (line 15108) * hacek accent: Accents. (line 14007) * Halmos symbol: \rule. (line 14174) * hard space: ~. (line 11741) * hat accent: Accents. (line 13954) * hat accent, math: Math accents. (line 10643) * header style: \pagestyle. (line 11299) * header, parameters for: Page layout parameters. (line 2185) * hello, world: Starting and ending. (line 433) * here, putting floats: Floats. (line 2458) * home page for manual: About this document. (line 362) * horizontal bar character: Text symbols. (line 13851) * horizontal paragraph indentation: \parindent & \parskip. (line 8930) * horizontal space: \hss. (line 11526) * horizontal space, stretchable: \hss. (line 11526) * horizontal spacing: \phantom & \vphantom & \hphantom. (line 10845) * hungarian umlaut accent: Accents. (line 13983) * hyperref package: \footnotemark. (line 7094) * hyperref package <1>: \footnotemark. (line 7103) * hyperref package <2>: \pagenumbering. (line 11281) * hyperref package <3>: \contentsline. (line 14791) * hyperref package <4>: Command line input. (line 16245) * hyphen character, non-breaking: Text symbols. (line 13862) * hyphenation, defining: \hyphenation. (line 6738) * hyphenation, discretionary: \discretionary. (line 6673) * hyphenation, forcing: \- (hyphenation). (line 6639) * hyphenation, preventing: \mbox & \makebox. (line 12227) * háček accent, math: Math accents. (line 10631) * Icelandic eth: Additional Latin letters. (line 14071) * Icelandic thorn: Additional Latin letters. (line 14107) * idx file: \index. (line 15041) * ij letter, Dutch: Additional Latin letters. (line 14083) * immediate \write: \write. (line 15898) * implementations of TeX: TeX engines. (line 511) * importing graphics: \includegraphics. (line 13155) * in: Units of length. (line 8446) * inch: Units of length. (line 8447) * including graphics: \includegraphics. (line 13155) * indent, forcing: \indent & \noindent. (line 8881) * indentation of paragraphs, in minipage: minipage. (line 4863) * indentfirst package: \part. (line 2767) * indentfirst package <1>: \chapter. (line 2829) * indentfirst package <2>: \section. (line 2924) * indentfirst package <3>: \subsection. (line 2990) * indentfirst package <4>: \subsubsection & \paragraph & \subparagraph. (line 3065) * indentfirst package <5>: \indent & \noindent. (line 8923) * indent_length: makeindex. (line 15187) * indent_space: makeindex. (line 15183) * index entries, subentries: \index. (line 14959) * index entries, ‘see’ and ‘see also’: \index. (line 14991) * index entry: \index. (line 14939) * index package: \index. (line 15036) * index, multiple: Indexes. (line 14902) * index, page range: \index. (line 14975) * index, printing: \printindex. (line 15215) * index, processing: makeindex. (line 15056) * index, producing manually: Produce the index manually. (line 14912) * index, style file: makeindex. (line 15068) * indexes: Indexes. (line 14857) * infinite horizontal stretch: \hfill. (line 11493) * infinite vertical stretch: \vfill. (line 12141) * inline formulas: math. (line 4754) * inner paragraph mode: Modes. (line 11124) * input file: Splitting the input. (line 14233) * input, on command line: Command line input. (line 16237) * input/output: Input/output. (line 15662) * input/output, to terminal: Input/output. (line 15662) * inputenc: inputenc package. (line 14114) * inserting figures: figure. (line 4063) * insertions of special characters: Special insertions. (line 13599) * interface, command line: Command line interface. (line 16109) * interline space: \baselineskip & \baselinestretch. (line 2318) * internal vertical mode: Modes. (line 11114) * invisible character: \phantom & \vphantom & \hphantom. (line 10845) * invisible character <1>: \mathstrut. (line 10908) * italic correction: \/. (line 11835) * italic font: Font styles. (line 1779) * itemize environment: itemize. (line 4295) * item_0: makeindex. (line 15132) * item_01: makeindex. (line 15141) * item_1: makeindex. (line 15135) * item_12: makeindex. (line 15150) * item_2: makeindex. (line 15138) * item_x1: makeindex. (line 15145) * item_x2: makeindex. (line 15154) * jobname: Command line options. (line 16190) * jobname <1>: Jobname. (line 16301) * JPEG files: \includegraphics. (line 13155) * JPG files: \includegraphics. (line 13155) * justification, ragged left: \raggedleft. (line 4268) * justification, ragged right: \raggedright. (line 4215) * Knuth, Donald E.: Overview. (line 404) * label: Cross references. (line 3350) * labelled lists, creating: description. (line 3784) * Lamport TeX: Overview. (line 425) * Lamport, Leslie: Overview. (line 404) * landscape option: Document class options. (line 776) * landscape orientation: Document class options. (line 787) * latex: TeX engines. (line 519) * latex command: Output files. (line 469) * LaTeX format (.fmt) files: TeX engines. (line 511) * LaTeX logo: Text symbols. (line 13718) * LaTeX overview: Overview. (line 404) * LaTeX Project team: About this document. (line 376) * LaTeX vs. LaTeX2e: About this document. (line 372) * latex-dev: TeX engines. (line 569) * latex-doc-ptr document: About this document. (line 389) * LaTeX2e logo: Text symbols. (line 13721) * LaTeX3 syntax: LaTeX command syntax. (line 626) * email address: About this document. (line 376) * latexsym package: Arrows. (line 9987) * Latin letters, additional: Additional Latin letters. (line 14057) * layout commands: Layout. (line 2028) * layout, page parameters for: Page layout parameters. (line 2185) * leaders, dots in table of contents: \@dottedtocline. (line 14609) * leading: \baselineskip & \baselinestretch. (line 2318) * left angle quotation marks: Text symbols. (line 13727) * left arrow, in text: Text symbols. (line 13859) * left brace, in text: Text symbols. (line 13789) * left quote: Text symbols. (line 13738) * left quote, double: Text symbols. (line 13878) * left quote, single: Text symbols. (line 13884) * left-hand equation numbers: Document class options. (line 790) * left-justifying text: \raggedright. (line 4215) * left-justifying text, environment for: flushleft. (line 4186) * left-to-right mode: Modes. (line 11091) * legalpaper option: Document class options. (line 746) * lengths, adding to: \addtolength. (line 8526) * lengths, allocating new: \newlength. (line 7599) * lengths, defining and using: Lengths. (line 8339) * lengths, setting: \setlength. (line 8497) * leqno option: Document class options. (line 776) * less than symbol, in text: Text symbols. (line 13856) * lethead_flag: makeindex. (line 15115) * lethead_prefix: makeindex. (line 15124) * lethead_suffix: makeindex. (line 15128) * letter class: Document classes. (line 703) * letter environment: letter. (line 4383) * letterpaper option: Document class options. (line 746) * letters, accented: Accents. (line 13920) * letters, additional Latin: Additional Latin letters. (line 14057) * letters, ending: \closing. (line 15486) * letters, starting: \opening. (line 15591) * letters, writing: Letters. (line 15367) * line break, forcing: \\. (line 6513) * line breaking: Line breaking. (line 6496) * line breaks, changing: \fussy & \sloppy. (line 6696) * line breaks, forcing: \linebreak & \nolinebreak. (line 6757) * line breaks, multiplication discretionary: \*. (line 11024) * line breaks, preventing: \linebreak & \nolinebreak. (line 6757) * lines in tables: tabular. (line 5706) * line_max: makeindex. (line 15179) * lining numerals: Font styles. (line 1830) * lining text up in tables: tabular. (line 5706) * lining text up using tab stops: tabbing. (line 5499) * list environment: list. (line 4388) * list items, specifying counter: \usecounter. (line 8191) * list of figures file: Output files. (line 502) * list of tables file: Output files. (line 502) * listings package: tabbing. (line 5639) * listings package <1>: verbatim. (line 6395) * listings package <2>: \verb. (line 6445) * lists of items: itemize. (line 4295) * lists of items, generic: list. (line 4388) * lists of items, numbered: enumerate. (line 3922) * lmodern package: fontenc package. (line 1330) * loading additional packages: Additional packages. (line 832) * locale information, from system: \write18. (line 16092) * log file: Output files. (line 487) * log file, writing to: \write. (line 15868) * logo, LaTeX: Text symbols. (line 13718) * logo, LaTeX2e: Text symbols. (line 13721) * logo, TeX: Text symbols. (line 13760) * long command: Class and package commands. (line 935) * low-9 quotation marks, single and double: Text symbols. (line 13750) * low-level font commands: Low-level font commands. (line 1899) * lowercase: Upper and lower case. (line 13635) * LR box: picture. (line 5011) * LR mode: Modes. (line 11091) * lrbox: lrbox. (line 12560) * lshort document: About this document. (line 395) * lualatex: TeX engines. (line 537) * lualatex-dev: TeX engines. (line 570) * LuaTeX: TeX engines. (line 538) * LuaTeX, 256 output streams in: \write. (line 15880) * m-width: Units of length. (line 8476) * macron accent: Accents. (line 13950) * macron accent, math: Math accents. (line 10625) * macros2e package: \makeatletter & \makeatother. (line 7472) * Madsen, Lars: eqnarray. (line 3989) * mail merges: \read. (line 15760) * main matter of a book: \frontmatter & \mainmatter & \backmatter. (line 3111) * make a box: \mbox & \makebox. (line 12227) * makeidx package: \printindex. (line 15221) * makeindex program: makeindex. (line 15056) * makeindex, program: makeindex. (line 15056) * makeindex, style file: makeindex. (line 15068) * making a title page: titlepage. (line 6327) * making paragraphs: Making paragraphs. (line 8767) * marginal notes: Marginal notes. (line 8962) * masculine ordinal symbol: Text symbols. (line 13869) * matching brackets: \left & \right. (line 10193) * matching parentheses: \left & \right. (line 10193) * math accents: Math accents. (line 10617) * math environment: math. (line 4754) * math environment <1>: Math formulas. (line 9012) * math formulas: Math formulas. (line 9012) * math functions: Math functions. (line 10501) * math miscellany: Math miscellany. (line 10998) * math mode: Modes. (line 11101) * math mode, entering: Math formulas. (line 9012) * math mode, spacing: Spacing in math mode. (line 10710) * math mode, spacing <1>: \phantom & \vphantom & \hphantom. (line 10845) * math mode, spacing <2>: \mathstrut. (line 10908) * math mode, vertical space: \smash. (line 10785) * math styles: Math styles. (line 10930) * math symbols: Math symbols. (line 9141) * math, arrows: Arrows. (line 9987) * math, bold: Font styles. (line 1826) * mathematics, boldface: \boldmath & \unboldmath. (line 10028) * mathtools package: Math formulas. (line 9067) * mathtools package <1>: Delimiters. (line 10178) * mathtools package <2>: \left & \right. (line 10217) * mathtools package <3>: Over- and Underlining. (line 10704) * mathtools package <4>: \smash. (line 10839) * mathtools package <5>: \phantom & \vphantom & \hphantom. (line 10887) * MetaPost package: \line. (line 5185) * mfirstuc package: Upper and lower case. (line 13674) * mhchem package: Subscripts & superscripts. (line 9134) * millimeter: Units of length. (line 8454) * minipage environment: minipage. (line 4766) * minipage, creating a: minipage. (line 4766) * minted package: tabbing. (line 5639) * minted package <1>: verbatim. (line 6395) * minted package <2>: \verb. (line 6445) * mirrors of CTAN: CTAN. (line 689) * mm: Units of length. (line 8453) * modes: Modes. (line 11079) * monospace font: Font styles. (line 1794) * moving arguments: \protect. (line 7942) * mpfootnote counter: \footnote. (line 7042) * mpfootnote counter <1>: Counters. (line 8117) * mu: Units of length. (line 8482) * mu, math unit: Units of length. (line 8483) * multicolumn text: \twocolumn. (line 2045) * multilingual support: Accents. (line 13920) * multind package: Indexes. (line 14902) * multiple indexes: Indexes. (line 14902) * multiplication, discretionary: \*. (line 11024) * name: \newglossaryentry. (line 15315) * name of document root: Jobname. (line 16301) * NBSP: ~. (line 11741) * nested \include, not allowed: \include & \includeonly. (line 14408) * new class commands: Class and package construction. (line 848) * new command, checking: Class and package commands. (line 933) * new command, definition: Class and package commands. (line 1008) * new commands, defining: \newcommand & \renewcommand. (line 7234) * new commands, defining <1>: \providecommand. (line 7411) * new line, output as input: \obeycr & \restorecr. (line 6575) * new line, starting: \\. (line 6513) * new line, starting (paragraph mode): \newline. (line 6615) * new page, starting: \newpage. (line 6862) * newline, in \write: \write. (line 15932) * noheader option for filecontents: filecontents. (line 4149) * non-breaking hyphen character: Text symbols. (line 13862) * non-English characters: Additional Latin letters. (line 14057) * nonstopmode: Command line options. (line 16174) * nosearch option for filecontents: filecontents. (line 4152) * notes in the margin: Marginal notes. (line 8962) * notitlepage option: Document class options. (line 776) * null delimiter: \left & \right. (line 10193) * numbered items, specifying counter: \usecounter. (line 8191) * numerals, old-style: Font styles. (line 1830) * oblique font: Font styles. (line 1791) * oe ligature: Additional Latin letters. (line 14099) * ogonek: Accents. (line 13987) * old-style numerals: Font styles. (line 1830) * one-column output: \onecolumn. (line 2033) * onecolumn option: Document class options. (line 805) * oneside option: Document class options. (line 805) * open a file: \openin & \openout. (line 15671) * openany option: Document class options. (line 805) * openbib option: Document class options. (line 776) * opening quote: Text symbols. (line 13738) * openright option: Document class options. (line 805) * OpenType fonts: TeX engines. (line 511) * operating system information: \write18. (line 16092) * optional arguments, defining and using: \newcommand & \renewcommand. (line 7277) * options, class: Class and package commands. (line 978) * options, color package: Color package options. (line 12617) * options, command line: Command line options. (line 16153) * options, document class: Document class options. (line 733) * options, document class <1>: Class and package structure. (line 871) * options, global: Additional packages. (line 841) * options, graphics package: Graphics package options. (line 12895) * options, package: Class and package structure. (line 871) * options, package <1>: Class and package commands. (line 978) * ordinals, feminine and masculine: Text symbols. (line 13869) * oslash: Additional Latin letters. (line 14095) * OT1: fontenc package. (line 1300) * outer paragraph mode: Modes. (line 11124) * output directory for all external files: Command line options. (line 16195) * overbar accent: Accents. (line 13950) * overdot accent, math: Math accents. (line 10637) * overlining: Over- and Underlining. (line 10666) * overview of LaTeX: Overview. (line 404) * overwrite option for filecontents: filecontents. (line 4146) * package file layout: Class and package structure. (line 871) * package options: Class and package structure. (line 871) * package options <1>: Class and package commands. (line 978) * package, abstract: abstract. (line 3593) * package, adjustbox: Boxes. (line 12221) * package, algorithm2e: tabbing. (line 5639) * package, amscd: Arrows. (line 10022) * package, amsfonts: Math formulas. (line 9067) * package, amsfonts <1>: Arrows. (line 9987) * package, amsmath: array. (line 3667) * package, amsmath <1>: array. (line 3675) * package, amsmath <2>: displaymath. (line 3856) * package, amsmath <3>: equation. (line 4057) * package, amsmath <4>: theorem. (line 6319) * package, amsmath <5>: Math formulas. (line 9067) * package, amsmath <6>: \left & \right. (line 10217) * package, amsmath <7>: \bigl & \bigr etc.. (line 10362) * package, amsmath <8>: Dots. (line 10419) * package, amsmath <9>: Math functions. (line 10606) * package, amsmath <10>: Spacing in math mode. (line 10727) * package, amsmath <11>: \phantom & \vphantom & \hphantom. (line 10895) * package, amsmath <12>: Colon character & \colon. (line 11013) * package, amsmath <13>: Colon character & \colon. (line 11017) * package, amsmath <14>: \thinspace & \negthinspace. (line 11826) * package, amsthm: theorem. (line 6319) * package, amsthm <1>: \rule. (line 14179) * package, answers: \write. (line 15937) * package, appendix: \appendix. (line 3101) * package, array: array. (line 3686) * package, Asymptote: \line. (line 5185) * package, Asymptote <1>: \strut. (line 12061) * package, Asymptote <2>: \mbox & \makebox. (line 12294) * package, Asymptote <3>: \write18. (line 16040) * package, babel: \chapter. (line 2842) * package, babel <1>: thebibliography. (line 6077) * package, babel <2>: Accents. (line 13920) * package, babel <3>: \today. (line 14209) * package, babel <4>: Table of contents etc.. (line 14582) * package, babel <5>: \index. (line 14991) * package, beamer: beamer template. (line 16411) * package, bigfoot: Footnotes of footnotes. (line 7213) * package, bm: bm. (line 10058) * package, caption: \caption. (line 2628) * package, cleveref: Cross references. (line 3382) * package, cleveref <1>: \ref. (line 3495) * package, cleveref <2>: \footnotemark. (line 7094) * package, cm-super: fontenc package. (line 1330) * package, comprehensive: Math symbols. (line 9141) * package, cprotect: verbatim. (line 6385) * package, cprotect <1>: \verb. (line 6448) * package, datatool: \read. (line 15760) * package, datetime: \today. (line 14223) * package, dcolumn: array. (line 3686) * package, enumitem: itemize. (line 4355) * package, enumitem <1>: list. (line 4654) * package, envlab: \makelabels. (line 15573) * package, etoolbox: Class and package commands. (line 1022) * package, eurosym: Text symbols. (line 13830) * package, eurosym <1>: Text symbols. (line 13831) * package, expl3: LaTeX command syntax. (line 626) * package, expl3 <1>: Upper and lower case. (line 13677) * package, fancyhdr: Page styles. (line 11163) * package, fancyhdr <1>: \pagestyle. (line 11306) * package, fancyvrb: tabbing. (line 5639) * package, fancyvrb <1>: verbatim. (line 6401) * package, flafter: Floats. (line 2488) * package, float: Floats. (line 2458) * package, fontspec: fontenc package. (line 1311) * package, fontspec <1>: OpenType bold math. (line 10073) * package, geometry: Document class options. (line 767) * package, geometry <1>: Document class options. (line 771) * package, graphpap: \graphpaper. (line 5137) * package, grfext: \DeclareGraphicsExtensions. (line 13067) * package, hyperref: \footnotemark. (line 7094) * package, hyperref <1>: \footnotemark. (line 7103) * package, hyperref <2>: \pagenumbering. (line 11281) * package, hyperref <3>: \contentsline. (line 14791) * package, hyperref <4>: Command line input. (line 16245) * package, indentfirst: \part. (line 2767) * package, indentfirst <1>: \chapter. (line 2829) * package, indentfirst <2>: \section. (line 2924) * package, indentfirst <3>: \subsection. (line 2990) * package, indentfirst <4>: \subsubsection & \paragraph & \subparagraph. (line 3065) * package, indentfirst <5>: \indent & \noindent. (line 8923) * package, index: \index. (line 15036) * package, latexsym: Arrows. (line 9987) * package, listings: tabbing. (line 5639) * package, listings <1>: verbatim. (line 6395) * package, listings <2>: \verb. (line 6445) * package, lmodern: fontenc package. (line 1330) * package, macros2e: \makeatletter & \makeatother. (line 7472) * package, makeidx: \printindex. (line 15221) * package, mathtools: Math formulas. (line 9067) * package, mathtools <1>: Delimiters. (line 10178) * package, mathtools <2>: \left & \right. (line 10217) * package, mathtools <3>: Over- and Underlining. (line 10704) * package, mathtools <4>: \smash. (line 10839) * package, mathtools <5>: \phantom & \vphantom & \hphantom. (line 10887) * package, MetaPost: \line. (line 5185) * package, mfirstuc: Upper and lower case. (line 13674) * package, mhchem: Subscripts & superscripts. (line 9134) * package, minted: tabbing. (line 5639) * package, minted <1>: verbatim. (line 6395) * package, minted <2>: \verb. (line 6445) * package, multind: Indexes. (line 14902) * package, pict2e: \line. (line 5185) * package, polyglossia: Accents. (line 13920) * package, polyglossia <1>: \today. (line 14209) * package, polyglossia <2>: Table of contents etc.. (line 14582) * package, polyglossia <3>: \index. (line 14991) * package, PSTricks: \line. (line 5185) * package, setspace: \baselineskip & \baselinestretch. (line 2392) * package, shellesc: \write18. (line 16098) * package, showidx: Indexes. (line 14902) * package, siunitx: minipage. (line 4897) * package, siunitx <1>: ~. (line 11777) * package, suffix: \@ifstar. (line 7544) * package, tablefootnote: Footnotes in a table. (line 7190) * package, texosquery: \write18. (line 16092) * package, textcase: Upper and lower case. (line 13671) * package, textcomp: Text symbols. (line 13700) * package, TikZ: \line. (line 5185) * package, TikZ <1>: \strut. (line 12061) * package, TikZ <2>: \mbox & \makebox. (line 12294) * package, tikz-cd: Arrows. (line 10022) * package, titlesec: Sectioning. (line 2690) * package, titlesec <1>: \part. (line 2771) * package, titlesec <2>: \chapter. (line 2850) * package, titlesec <3>: \section. (line 2928) * package, titlesec <4>: \subsection. (line 2994) * package, titlesec <5>: \subsubsection & \paragraph & \subparagraph. (line 3069) * package, tocbibbind: Table of contents etc.. (line 14569) * package, tocloft: Table of contents etc.. (line 14569) * package, tocloft <1>: \contentsline. (line 14788) * package, ulem: Over- and Underlining. (line 10675) * package, unicode-math: OpenType bold math. (line 10087) * package, unicode-math <1>: Dots. (line 10440) * package, unicode-math <2>: Greek letters. (line 10489) * package, url: \verb. (line 6442) * package, verbatimbox: verbatim. (line 6401) * package, xparse: LaTeX command syntax. (line 626) * package, xparse <1>: \@ifstar. (line 7544) * package, xr: xr package. (line 3501) * package, xr-hyper: xr package. (line 3501) * package, xspace: xspace package. (line 8056) * package, xstring: Jobname. (line 16348) * packages, loading additional: Additional packages. (line 832) * page break, forcing: \pagebreak & \nopagebreak. (line 6920) * page break, preventing: \pagebreak & \nopagebreak. (line 6920) * page breaking: Page breaking. (line 6789) * page counter: Counters. (line 8117) * page layout parameters: Page layout parameters. (line 2185) * page number, cross referencing: \pageref. (line 3448) * page numbering style: \pagenumbering. (line 11241) * page style, this page: \thispagestyle. (line 11384) * page styles: Page styles. (line 11157) * page, colored: Colored pages. (line 12837) * page_precedence: makeindex. (line 15192) * paired delimiters: \left & \right. (line 10193) * paragraph: Sectioning. (line 2636) * paragraph <1>: \subsubsection & \paragraph & \subparagraph. (line 3012) * paragraph counter: Counters. (line 8117) * paragraph indentation: \parindent & \parskip. (line 8930) * paragraph indentation, in minipage: minipage. (line 4863) * paragraph indentations in quoted text: quotation & quote. (line 5469) * paragraph indentations in quoted text, omitting: quotation & quote. (line 5469) * paragraph mode: Modes. (line 11085) * paragraph mode <1>: \parbox. (line 12383) * paragraph symbol: Text symbols. (line 13742) * paragraph, ending: \par. (line 8828) * paragraph, in a box: \parbox. (line 12383) * paragraphs: Making paragraphs. (line 8767) * parameters, for footnotes: \footnote. (line 7014) * parameters, page layout: Page layout parameters. (line 2185) * parameters, substituting: \newcommand & \renewcommand. (line 7309) * parent directories, cannot write to: \write and security. (line 15961) * parentheses: Delimiters. (line 10143) * part: Sectioning. (line 2636) * part <1>: \part. (line 2723) * part counter: Counters. (line 8117) * pattern, current tab stops, tabbing: tabbing. (line 5544) * pc: Units of length. (line 8443) * PDF graphic files: \includegraphics. (line 13155) * pdflatex: TeX engines. (line 520) * pdflatex command: Output files. (line 479) * pdflatex-dev: TeX engines. (line 571) * pdfTeX: Output files. (line 479) * pdfTeX engine: TeX engines. (line 521) * period, abbreviation-ending: \@. (line 11610) * period, centered, in text: Text symbols. (line 13872) * period, sentence-ending: \@. (line 11610) * period, spacing after: \@. (line 11610) * pica: Units of length. (line 8444) * pict2e package: \line. (line 5185) * picture environment: picture. (line 4924) * pictures, creating: picture. (line 4924) * pilcrow: Text symbols. (line 13742) * placement of floats: Floats. (line 2437) * platex: TeX engines. (line 559) * platex-dev: TeX engines. (line 572) * plural: \newglossaryentry. (line 15323) * PNG files: \includegraphics. (line 13155) * poetry, an environment for: verse. (line 6460) * point: Units of length. (line 8440) * polish l: Additional Latin letters. (line 14087) * polyglossia package: Accents. (line 13920) * polyglossia package <1>: \today. (line 14209) * polyglossia package <2>: Table of contents etc.. (line 14582) * polyglossia package <3>: \index. (line 14991) * portrait orientation: Document class options. (line 787) * position, in picture: picture. (line 4982) * postamble: makeindex. (line 15104) * PostScript point: Units of length. (line 8450) * postscript, in letters: \ps. (line 15603) * pounds symbol: Text symbols. (line 13746) * preamble: makeindex. (line 15100) * preamble, defined: Starting and ending. (line 449) * prerelease testing: TeX engines. (line 575) * prompt, *: Recovering from errors. (line 16383) * pronunciation: Overview. (line 425) * PSTricks package: \line. (line 5185) * pt: Units of length. (line 8439) * quad: Spacing in math mode. (line 10773) * question mark, upside-down: Text symbols. (line 13875) * quotation environment: quotation & quote. (line 5469) * quotation marks, French: Text symbols. (line 13727) * quote environment: quotation & quote. (line 5469) * quote, single straight: Text symbols. (line 13890) * quote, straight base: Text symbols. (line 13894) * quoted text with paragraph indentation, displaying: quotation & quote. (line 5469) * quoted text without paragraph indentation, displaying: quotation & quote. (line 5469) * radical: \sqrt. (line 11052) * ragged left text: \raggedleft. (line 4268) * ragged left text, environment for: flushright. (line 4248) * ragged right text: \raggedright. (line 4215) * ragged right text, environment for: flushleft. (line 4186) * read a file: \read. (line 15735) * redefining a command: \newcommand & \renewcommand. (line 7234) * redefining environments: \newenvironment & \renewenvironment. (line 7651) * reference, forward: Cross references. (line 3371) * references, resolving forward: Output files. (line 492) * registered symbol: Text symbols. (line 13897) * relation, text above: \stackrel. (line 11069) * release candidates: TeX engines. (line 575) * remarks in the margin: Marginal notes. (line 8962) * report class: Document classes. (line 703) * reporting bugs: About this document. (line 380) * reserved characters: Reserved characters. (line 13605) * resizing: \scalebox. (line 13538) * resizing <1>: \resizebox. (line 13570) * restricted shell access: \write18. (line 16080) * right angle quotation marks: Text symbols. (line 13727) * right arrow, in text: Text symbols. (line 13900) * right brace, in text: Text symbols. (line 13793) * right quote: Text symbols. (line 13753) * right quote, double: Text symbols. (line 13881) * right quote, single: Text symbols. (line 13887) * right-hand equation numbers: Document class options. (line 790) * right-justifying text: \raggedleft. (line 4268) * right-justifying text, environment for: flushright. (line 4248) * rigid lengths: Lengths. (line 8342) * ring accent: Accents. (line 13991) * ring accent, math: Math accents. (line 10646) * robust commands: \protect. (line 7929) * roman font: Font styles. (line 1782) * root file: Splitting the input. (line 14237) * root file <1>: Jobname. (line 16301) * roots: \sqrt. (line 11052) * rotating graphics: \rotatebox. (line 13470) * rotating text: \rotatebox. (line 13470) * rotation: \rotatebox. (line 13470) * row, tabbing: tabbing. (line 5539) * rubber lengths: Lengths. (line 8342) * rubber lengths, defining new: \newlength. (line 7599) * running header and footer: Page layout parameters. (line 2185) * running header and footer style: \pagestyle. (line 11299) * samepage environment: \pagebreak & \nopagebreak. (line 6958) * sans serif font: Font styles. (line 1788) * scaled point: Units of length. (line 8466) * scaling: \scalebox. (line 13538) * scaling <1>: \resizebox. (line 13570) * script fonts: Calligraphic. (line 10126) * script letters for math: Font styles. (line 1776) * script style: Math styles. (line 10947) * scriptscript style: Math styles. (line 10950) * scrollmode: Command line options. (line 16174) * secnumdepth: Sectioning. (line 2700) * secnumdepth counter: Sectioning. (line 2701) * section: Sectioning. (line 2636) * section <1>: \section. (line 2870) * section counter: Counters. (line 8117) * section number, cross referencing: \ref. (line 3472) * section numbers, printing: Sectioning. (line 2701) * section symbol: Text symbols. (line 13757) * section, redefining: \@startsection. (line 3147) * sectioning commands: Sectioning. (line 2636) * sectioning, part: \part. (line 2723) * security and \write: \write and security. (line 15945) * see and see also index entries: \index. (line 14991) * self-contained sources: filecontents. (line 4157) * series, of fonts: Low-level font commands. (line 1941) * setspace package: \baselineskip & \baselinestretch. (line 2392) * setting counters: \setcounter. (line 8250) * sh, used by \write18: \write18. (line 16087) * shapes, of fonts: Low-level font commands. (line 1981) * sharp S letters: Additional Latin letters. (line 14103) * shell access: \write18. (line 16033) * shell escape: Command line options. (line 16208) * SHELL, environment variables: \write18. (line 16087) * shellesc package: \write18. (line 16098) * showidx package: Indexes. (line 14902) * simulating typed text: verbatim. (line 6366) * single angle quotation marks: Text symbols. (line 13727) * single guillemets: Text symbols. (line 13727) * single left quote: Text symbols. (line 13884) * single low-9 quotation mark: Text symbols. (line 13750) * single quote, straight: Text symbols. (line 13890) * single right quote: Text symbols. (line 13887) * siunitx package: minipage. (line 4897) * siunitx package <1>: ~. (line 11777) * sizes of text: Font sizes. (line 1842) * skip plain TeX: Lengths. (line 8342) * skip register, plain TeX: \newlength. (line 7599) * slanted font: Font styles. (line 1791) * slides class: Document classes. (line 703) * sloppypar environment: sloppypar. (line 6710) * sloppypar environment <1>: sloppypar. (line 6710) * slot, font: \DeclareTextAccent. (line 1427) * small caps font: Font styles. (line 1785) * sort: \newglossaryentry. (line 15327) * source files, making self-contained: filecontents. (line 4157) * sp: Units of length. (line 8465) * space between lines: \baselineskip & \baselinestretch. (line 2318) * space, inserting horizontal: \hss. (line 11526) * space, inserting vertical: \addvspace. (line 12170) * space, negative thin: \thinspace & \negthinspace. (line 11806) * space, thin: \thinspace & \negthinspace. (line 11806) * space, unbreakable: ~. (line 11741) * space, vertical: \vspace. (line 12090) * spaces: Spaces. (line 11412) * spaces, ignore around commands: \ignorespaces & \ignorespacesafterend. (line 7981) * spaces, ignore around commands <1>: xspace package. (line 8056) * spacing within math mode: Spacing in math mode. (line 10710) * spacing, inter-sentence: \frenchspacing & \nonfrenchspacing. (line 11656) * spacing, inter-sentence <1>: \normalsfcodes. (line 11677) * spacing, math mode: \phantom & \vphantom & \hphantom. (line 10845) * spacing, math mode <1>: \mathstrut. (line 10908) * Spanish ordinals, feminine and masculine: Text symbols. (line 13869) * special characters: Reserved characters. (line 13605) * special characters <1>: Additional Latin letters. (line 14057) * special insertions: Special insertions. (line 13599) * specifier, float placement: Floats. (line 2437) * splitting the input file: Splitting the input. (line 14233) * square root: \sqrt. (line 11052) * stack math: \stackrel. (line 11069) * star-variants, commands: \@ifstar. (line 7486) * starred form, defining new commands: \newcommand & \renewcommand. (line 7256) * starting a new page: \newpage. (line 6862) * starting a new page and clearing floats: \clearpage & \cleardoublepage. (line 6820) * starting and ending: Starting and ending. (line 433) * starting on a right-hand page: \clearpage & \cleardoublepage. (line 6820) * sterling symbol: Text symbols. (line 13746) * straight double quote, base: Text symbols. (line 13894) * straight quote, base: Text symbols. (line 13894) * straight single quote: Text symbols. (line 13890) * stretch, infinite horizontal: \hfill. (line 11493) * stretch, infinite vertical: \vfill. (line 12141) * stretch, omitting vertical: \raggedbottom. (line 2174) * strut: \footnote. (line 7027) * strut <1>: \strut. (line 12005) * strut, math: \mathstrut. (line 10908) * styles of text: Font styles. (line 1703) * styles, page: Page styles. (line 11157) * subparagraph: Sectioning. (line 2636) * subparagraph <1>: \subsubsection & \paragraph & \subparagraph. (line 3012) * subparagraph counter: Counters. (line 8117) * subscript: Subscripts & superscripts. (line 9078) * subsection: Sectioning. (line 2636) * subsection <1>: \subsection. (line 2948) * subsection counter: Counters. (line 8117) * subsubsection: Sectioning. (line 2636) * subsubsection <1>: \subsubsection & \paragraph & \subparagraph. (line 3012) * subsubsection counter: Counters. (line 8117) * suffix package: \@ifstar. (line 7544) * superscript: Subscripts & superscripts. (line 9078) * symbol: \newglossaryentry. (line 15331) * symbol, defining: \DeclareTextSymbol. (line 1595) * symbols, arrows: Arrows. (line 9987) * symbols, boldface: bm. (line 10058) * symbols, math: Math symbols. (line 9141) * symbols, text: Text symbols. (line 13700) * system commands, run from LaTeX: \write18. (line 16033) * system information: \write18. (line 16092) * T1: fontenc package. (line 1300) * tab stops, using: tabbing. (line 5499) * tabbing environment: tabbing. (line 5499) * table counter: Counters. (line 8117) * table environment: table. (line 5648) * table of contents: \contentsline. (line 14760) * table of contents entry, create dotted line: \@dottedtocline. (line 14588) * table of contents entry, manually adding: \addcontentsline. (line 14623) * table of contents file: Output files. (line 502) * table of contents, avoiding footnotes: Footnotes in section headings. (line 7124) * table of contents, creating: Table of contents etc.. (line 14465) * table of contents, sectioning numbers printed: Sectioning. (line 2712) * tablefootnote package: Footnotes in a table. (line 7190) * tables, creating: table. (line 5648) * tabular environment: tabular. (line 5706) * template (simple), article: article template. (line 16441) * template, beamer: beamer template. (line 16411) * template, book: book template. (line 16464) * template, book <1>: Larger book template. (line 16488) * templates, document: Document templates. (line 16404) * terminal input/output: Input/output. (line 15662) * terminal, writing to: \write. (line 15868) * TeX format (.fmt) files: TeX engines. (line 511) * TeX logo: Text symbols. (line 13760) * texosquery package: \write18. (line 16092) * texput, jobname default: Jobname. (line 16322) * text style: Math styles. (line 10945) * text symbols: Text symbols. (line 13700) * text, resizing: \scalebox. (line 13538) * text, resizing <1>: \resizebox. (line 13570) * text, scaling: \scalebox. (line 13538) * text, scaling <1>: \resizebox. (line 13570) * textcase package: Upper and lower case. (line 13671) * textcomp package: Text symbols. (line 13700) * thanks, for titlepage: \maketitle. (line 11220) * thebibliography environment: thebibliography. (line 6030) * theindex: Produce the index manually. (line 14912) * theindex environment: Produce the index manually. (line 14915) * theorem environment: theorem. (line 6297) * theorem-like environment: \newtheorem. (line 7785) * theorems, defining: \newtheorem. (line 7785) * theorems, typesetting: theorem. (line 6297) * thin space: Spacing in math mode. (line 10751) * thin space <1>: \thinspace & \negthinspace. (line 11806) * thin space, negative: Spacing in math mode. (line 10765) * thin space, negative <1>: \thinspace & \negthinspace. (line 11806) * thorn, Icelandic letter: Additional Latin letters. (line 14107) * three-quarters em-dash: Text symbols. (line 13903) * tie: ~. (line 11741) * tie-after accent: Accents. (line 13997) * TikZ package: \line. (line 5185) * TikZ package <1>: \strut. (line 12061) * TikZ package <2>: \mbox & \makebox. (line 12294) * tikz-cd package: Arrows. (line 10022) * tilde accent: Accents. (line 13962) * tilde accent, math: Math accents. (line 10649) * tilde, ASCII, in text: Text symbols. (line 13766) * title page, separate or run-in: Document class options. (line 798) * title pages, creating: titlepage. (line 6327) * title, for titlepage: \maketitle. (line 11227) * titlepage environment: titlepage. (line 6327) * titlepage option: Document class options. (line 776) * titles, making: \maketitle. (line 11169) * titlesec package: Sectioning. (line 2690) * titlesec package <1>: \part. (line 2771) * titlesec package <2>: \chapter. (line 2850) * titlesec package <3>: \section. (line 2928) * titlesec package <4>: \subsection. (line 2994) * titlesec package <5>: \subsubsection & \paragraph & \subparagraph. (line 3069) * tocbibbind package: Table of contents etc.. (line 14569) * tocdepth: Sectioning. (line 2711) * tocdepth counter: Sectioning. (line 2712) * tocloft package: Table of contents etc.. (line 14569) * tocloft package <1>: \contentsline. (line 14788) * today’s date: \today. (line 14202) * tombstone: \rule. (line 14174) * topmargin: Page layout parameters. (line 2304) * topnumber: Floats. (line 2544) * topnumber <1>: Floats. (line 2545) * totalnumber: Floats. (line 2548) * totalnumber <1>: Floats. (line 2549) * trademark symbol: Text symbols. (line 13906) * transcript file: Output files. (line 487) * TrueType fonts: TeX engines. (line 511) * TS1 encoding: Text symbols. (line 13700) * two-column output: \twocolumn. (line 2045) * two-thirds em-dash: Text symbols. (line 13909) * twocolumn option: Document class options. (line 805) * twoside option: Document class options. (line 805) * type styles: Font styles. (line 1703) * typed text, simulating: verbatim. (line 6366) * typeface sizes: Font sizes. (line 1842) * typefaces: Fonts. (line 1263) * typewriter font: Font styles. (line 1794) * typewriter labels in lists: description. (line 3814) * ulem package: Over- and Underlining. (line 10675) * umlaut accent: Accents. (line 13939) * unbreakable space: ~. (line 11741) * underbar: Accents. (line 13967) * underlining: Over- and Underlining. (line 10666) * underscore, in text: Text symbols. (line 13912) * Unicode: inputenc package. (line 14123) * Unicode input, native: TeX engines. (line 511) * unicode-math package: OpenType bold math. (line 10087) * unicode-math package <1>: Dots. (line 10440) * unicode-math package <2>: Greek letters. (line 10489) * units, of length: Units of length. (line 8436) * unofficial nature of this manual: About this document. (line 376) * unordered lists: itemize. (line 4295) * uplatex: TeX engines. (line 560) * uplatex-dev: TeX engines. (line 573) * uppercase: Upper and lower case. (line 13635) * url package: \verb. (line 6442) * using BibTeX: Using BibTeX. (line 6208) * UTF-8, default LaTeX input encoding: Overview. (line 410) * UTF-8, engine support for: TeX engines. (line 511) * UTF-8, font support for: fontenc package. (line 1300) * variables, a list of: Counters. (line 8108) * vector symbol, math: Math accents. (line 10652) * verbatim environment: verbatim. (line 6366) * verbatim text: verbatim. (line 6366) * verbatim text, inline: \verb. (line 6409) * verbatimbox package: verbatim. (line 6401) * verse environment: verse. (line 6460) * vertical bar, double, in text: Text symbols. (line 13783) * vertical bar, in text: Text symbols. (line 13780) * vertical mode: Modes. (line 11109) * vertical space: \vspace. (line 12090) * vertical space <1>: \addvspace. (line 12170) * vertical space before paragraphs: \parindent & \parskip. (line 8930) * vertical spacing: \phantom & \vphantom & \hphantom. (line 10845) * vertical spacing <1>: \mathstrut. (line 10908) * vertical spacing, math mode: \smash. (line 10785) * visible space: \verb. (line 6434) * visible space symbol, in text: Text symbols. (line 13915) * weights, of fonts: Low-level font commands. (line 1951) * whatsit item: \write. (line 15903) * white space: Spaces. (line 11412) * wide hat accent, math: Math accents. (line 10655) * wide tilde accent, math: Math accents. (line 10658) * widths, of fonts: Low-level font commands. (line 1963) * Wright, Joseph: Upper and lower case. (line 13677) * writing external files: filecontents. (line 4121) * writing letters: Letters. (line 15367) * x-height: Units of length. (line 8472) * xdvi command: Output files. (line 469) * xdvipdfmx: TeX engines. (line 547) * xelatex: TeX engines. (line 546) * xelatex-dev: TeX engines. (line 574) * XeTeX: TeX engines. (line 547) * xindex program: makeindex. (line 15209) * xindy program: makeindex. (line 15202) * xparse package: LaTeX command syntax. (line 626) * xparse package <1>: \@ifstar. (line 7544) * xr package: xr package. (line 3501) * xr-hyper package: xr package. (line 3501) * xspace package: xspace package. (line 8056) * xstring package: Jobname. (line 16348)