Contents
Motivation
There are various ways to detect modules from weighted networks. Conventional approaches such as clustering or graph partitioning purely use the network topology to define modules (Fortunato 2010). But we may need additional information such as increasing high-throughput omics data. On the one hand, the construction of reliable networks, especially for specific tissues, is relatively slow. On the other hand, integrating omics data with network topology has become a paradigm in system biology community in the past decade (Mitra et al. 2013). Weighted gene co-expression network (WGCN) is a pure data-driven gene network, which only relies on gene expression profiles. There is no rigorous definition of active modules in WGCN, but the module itself should be more compact and informative compared with random subnetworks. AMOUNTAIN (D. Li et al. 2016) provides a convex optimization based approach to identify such modules. Here we embed parts of the examples from the corresponding package AMOUNTAIN help pages into a single document.
Network simulation
We follow (W. Li et al. 2011) to construct gene co-expression networks for simulation study. Let \(n\) be the number of genes, and edge weights \(W\) as well as node score \(z\) follow the uniform distribution in range \([0,1]\). A module contains \(k\) genes inside which the edge weights as well as node score follow the uniform distribution in range \([\theta,1]\), where \(\theta=\{0.5,0.6,0.7,0.8,0.9\}\).
library(AMOUNTAIN)
n = 100
k = 20
theta = 0.5
pp <- networkSimulation(n, k, theta)
moduleid <- pp[[3]]
netid <- 1:100
restp <- netid[-moduleid]
groupdesign <- list(moduleid,restp)
names(groupdesign) <- c('module','background')
The following figure shows the weighted co-expression network when \(n=100,k=20\) and red nodes indicate module members and wider edges mean larger similarities. Visualization is based on qgraph.
require(qgraph)
## Loading required package: qgraph
pg <- qgraph(pp[[1]],groups=groupdesign,legend=TRUE)
When simulating a two-layer network, the basic method is to connect two independent networks with an inter-layer weight matrix \(A\), which is designed to have larger weights between two modules.
n1 = 100
k1 = 20
theta1 = 0.5
n2 = 80
k2 = 10
theta2 = 0.5
ppresult <- twolayernetworkSimulation(n1,k1,theta1,n2,k2,theta2)
A <- ppresult[[3]]
pp <- ppresult[[1]]
moduleid <- pp[[3]]
netid <- 1:n1
restp <- netid[-moduleid]
pp2 <- ppresult[[2]]
moduleid2 <- pp2[[3]]
netid2 <- 1:n2
restp2 <- netid2[-moduleid2]
library(qgraph)
## labelling the groups
groupdesign <- list(moduleid,restp,(moduleid2+n1),(restp2+n1))
names(groupdesign) <- c('module1','background1','module2',
'background2')
twolayernet <- matrix(0,nrow=(n1+n2),ncol=(n1+n2))
twolayernet[1:n1,1:n1] <- pp[[1]]
twolayernet[(n1+1):(n1+n2),(n1+1):(n1+n2)] <- pp2[[1]]
twolayernet[1:n1,(n1+1):(n1+n2)] <- A
twolayernet[(n1+1):(n1+n2),1:n1] <- t(A)
The following figure shows the the two-layer weighted co-expression network based on above simulation.
g <- qgraph(twolayernet,groups=groupdesign,legend=TRUE)
Module identification for single layer network
Given the network \(G\) with edges weight matrix \(W\in\mathbb{R}^{n\times n}\) and nodes weight vector \({\bf z}\in\mathbb{R}^{n}\), where \(n\) is the number of nodes, we formulate the active modules identification on WGCN as a elastic net contrained optmization problem:
\[\min_{{\bf x}\in \mathbb{R}_+^n}\ F({\bf x})=-{\bf x}^TW{\bf x}-\lambda{\bf z}^T{\bf x}\quad s.t.\quad \alpha\|{\bf x}\|_1+(1-\alpha)\|{\bf x}\|_2^2=1\]
where the module membership vector \({\bf x}\in\mathbb{R}_+^n\) is relaxed from a \(0-1\) vector in which \(x_i\neq0\) means node \(i\) is in the module. And \(\alpha\) is the parameter to balance \(\ell_1\)-norm and \(\ell_2\)-norm which actually controls the module size. Larger \(\alpha\) means a more sparse vector, corresponding smaller module in this case. We adopt the euclidean projection based technique (Gong, Gai, and Zhang 2011) to solve the problem.
Here we show how to use the following function in the package to find an active module for above simulated single layer network. With groundtruth in hand, we can evaluate the quality of identified modules by F-score. In order to get higher quality, we need to tune parameter \(\alpha\) in the elastic net penalty and \(\lambda = 1\) in the objective function. The common way to select two optimal parameters is grid search.
n = 100
k = 20
theta = 0.5
pp <- networkSimulation(n,k,theta)
moduleid <- pp[[3]]
alphaset <- seq(0.1,0.9,by=0.1)
lambdaset <- 2^seq(-5,5)
## using a grid search to select lambda and alpha
Fscores <- matrix(0,nrow = length(alphaset),ncol = length(lambdaset))
for (j in 1:length(alphaset)) {
for (k in 1:length(lambdaset)) {
x <- moduleIdentificationGPFixSS(pp[[1]],pp[[2]],rep(1/n,n),maxiter = 500,
a=alphaset[j],lambda = lambdaset[k])
predictedid<-which(x[[2]]!=0)
recall <- length(intersect(predictedid,moduleid))/length(moduleid)
precise <- length(intersect(predictedid,moduleid))/length(predictedid)
Fscores[j,k] <- 2*precise*recall/(precise+recall)
}
}
We can show \(gridFscore\) by 3-D plot to see how these parameters affect the performance. By certain combination of these two parameters, we can almost exactly find the target model nodes with \(F-score=1\).
persp(Fscores,theta = 45,phi = 30,col = "gray",scale = FALSE,xlab = 'alpha',ylab = 'lambda',
zlab = 'F-score',main = 'Fscores of identified module',box = TRUE)
Module identification for two-layer network
The basic idea to identification modules on a two-layer network is to find two active modules on each layer, at the same time with maximal inter-later links. we have function \(\texttt{moduleIdentificationGPFixSSTwolayer}\) in the package. Following the two-layer network simulation in section 1, we call the method.
## network simulation is the same as before
modres <- moduleIdentificationGPFixSSTwolayer(pp[[1]],pp[[2]],rep(1/n1,n1),pp2[[1]],pp2[[2]],rep(1/n2,n2),A)
predictedid <- which(modres[[1]]!=0)
recall <- length(intersect(predictedid,moduleid))/length(moduleid)
precise <- length(intersect(predictedid,moduleid))/length(predictedid)
F1 <- 2*precise*recall/(precise+recall)
predictedid2 <- which(modres[[2]]!=0)
recall2 <- length(intersect(predictedid2,moduleid2))/length(moduleid2)
precise2 <- length(intersect(predictedid2,moduleid2))/length(predictedid2)
F2 <- 2*precise2*recall2/(precise2+recall2)
And we can also select optimal parameters combination in a more sophisticated way based on the example in section 2.
Module identification for multi-layer network
A general multi-layer network is a natural extension of two-layer networks. Here we consider a specific form of multi-layer network that we could conduct simple operations. The basic idea to identification modules on a two-layer network is to find two active modules on each layer, at the same time with maximal inter-later links. we have function \(\texttt{moduleIdentificationGPFixSSMultilayer}\) in the package. Following the multi-layer network simulation, we call the method as:
## network simulation
n = 100
k = 20
L = 5
theta = 0.5
cpl <- multilayernetworkSimulation(n,k,theta,L)
listz <- list()
for (i in 1:L){
listz[[i]] <- cpl[[i+2]]
}
moduleid <- cpl[[2]]
## use default parameters here
x <- moduleIdentificationGPFixSSMultilayer(cpl[[1]],listz,rep(1/n,n))
predictedid <- which(x[[2]]!=0)
recall <- length(intersect(predictedid,moduleid))/length(moduleid)
precise <- length(intersect(predictedid,moduleid))/length(predictedid)
Fscore <- (2*precise*recall/(precise+recall))
And we can also select optimal parameters combination in a more sophisticated way based on the example in section 2.
Module identification for real-world data
The usage of the package functions is the same for real-world data, but we need to be aware of two aspects. First of all the way to calculate edges score and nodes score in a weighted network can make an impact on the performance. Different input \(W\) and \(\bf z\) in the objective function may lead to different modules.
Secondly, we do not have groundtruth about module membership for real world data. In this case, we may need to select the proper parameter so that the desired module size can be archived. When fixing \(\lambda=0.01\), we use a binary search method to select \(\alpha\) for the elastic net penalty which controls the sparsity of the module.
## binary search parameter to fix module size to 100~200
abegin = 0.01
aend = 0.9
maxsize = 200
minsize = 100
for (i in 1:100) {
x <- moduleIdentificationGPFixSS(W,z,rep(1/n,n),a=(abegin+aend)/2,lambda = 0.001,maxiter = 500)
predictedid <- which(x[[2]]!=0)
if(length(predictedid) > maxsize){
abegin <- (abegin+aend)/2
}else if (length(predictedid) < minsize){
aend <- (abegin+aend)/2
}else
break
}
Biological explanation
Finally, we can do gene annotation enrichment analysis with interactive tools like DAVID or Enrichr, to see whether a module gene list can be explained by existing biological process, pathways or even diseases.
Developer page
Please visit AMOUNTAIN for new features.
References
Gong, Pinghua, Kun Gai, and Changshui Zhang. 2011. “Efficient Euclidean Projections via Piecewise Root Finding and Its Application in Gradient Projection.” Neurocomputing 74 (17). Elsevier: 2754–66.
Li, Dong, Shan He, Zhisong Pan, and Guyu Hu. 2016. “Active Modules for Multilayer Weighted Gene Co-Expression Networks: A Continuous Optimization Approach.” BioRxiv. Cold Spring Harbor Labs Journals. doi:10.1101/056952.
Li, Wenyuan, Chun-Chi Liu, Tong Zhang, Haifeng Li, Michael S Waterman, and Xianghong Jasmine Zhou. 2011. “Integrative Analysis of Many Weighted Co-Expression Networks Using Tensor Computation.” PLoS Comput Biol 7 (6). Public Library of Science: e1001106.
Mitra, Koyel, Anne-Ruxandra Carvunis, Sanath Kumar Ramesh, and Trey Ideker. 2013. “Integrative Approaches for Finding Modular Structure in Biological Networks.” Nature Reviews Genetics 14 (10). Nature Publishing Group: 719–32.